I get code 643 when you perform the update: update of security for Microsoft Silverlight (KB2932677)

Similar Questions

• I am still getting error code 8004ff83 when you perform the update

  I am still getting error code 8004ff83 when you perform the update

  I read that in safe mode, it would be possible to do the update. What is safe mode?

  Hello

  Perform the steps from the link below and check if the problem persists.
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
   
  Hope this information helps.

• get error C355 when you perform the update of windows

  When you try to update windows I get a message failed due to error C355

  Hello

  1. for the update that you get this error code?
  2 did you recent hardware or software changes to your computer before this problem?

  I suggest you try the steps below and check if it helps

  Step 1: Install the first update manually in the clean boot state.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Step 2: I also suggest you to run the system analysis tool and look for problems with Windows Update.

  http://support.Microsoft.com/kb/947821

  Step 3: You can try to download the update from the Microsoft Download Center and install it.

  Hope this information is useful.

• Error 800719E4 when you install the update of security for Vista(KB972270/KB978207/KB951847)

  Hello

  I need help for error of update of address 3 for Vista security:

  (1) 800719E4 error during the installation of update of security for Vista (KB972270)
  (2) Cummaltive security for Internet rexplorer 7 Vista (KB978207)
  (3) Microsoft.NET Framework 3.5 service pack 1 and the .NET Framework 3.5 Family Update (KB951847) x 86

  Thank you

  See the section "How to get help", for example, http://support.microsoft.com/kb/972270

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I get code 643 when I try to update what I'd do

  I keep getting code 643 when I try to update, what do I do?

  Hi HelenYB,

  1. the updates you are trying to install?

  This error occurs usually when updates .net framework could not install

  You can try the steps in the following article and see if it helps.

  You receive the error 0 x 80070643, error code 0 x 643 or updates may be offered again when you try to install the .NET Framework updates when you use Windows Update or Microsoft Updates

  Hope this information is useful.

• I try to install the update of security for Microsoft Office System 2007 (KB972581), but if failed and I get the error code Code 57A__

  I try to install the update of security for Microsoft Office System 2007 (KB972581), but if failed and I get the error code Code 57A

  I have install the 2007 Microsoft Office Suite Service Pack 2

  I bet that if you check the size of the file that has been downloaded it will be probably very small, indicating that it was not downloaded correctly.

  I don't think you have another computer at hand, or a friend with a USB key which may be able to download and copy it for you?  Maybe burn it to a CD or something.

  I could download it and save it to my desktop so I am confident that it is not a problem with the link itself or the file is available for download with success.

  I know this isn't a very good suggestion, but the only other option would be to challenge support and see if a technician can take control of your machine and see if they can solve the problem of internet explore.

  If you find my answer was what you're looking for, remember to click on the box "mark as answer" below!

• Where can I get the update of security for Microsoft Silverligh (KB2814124)

  I can't seem to get the update above and would be grateful for help please and thank you

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=36946

  Update of security for Microsoft Silverlight (KB2814124)

• Update Windows guard invites me to install the update of security for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2538242) after I have already installed.

  Update Windows guard invites me to install the update of security for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2538242) after I have already installed.

  Hello

  Thanks for posting in answers.microsoft.com

  So that we can fix that Mr is that we do a clean boot using msconfig

  1. Click Start, click Run, and type "msconfig".
  2. In msconfig go to services and hide all microsoft services, once's done it to disable all other services
  3. in msconfig again go to the Startup tab and disable all startup programs
  4. Restart the computer anddo updates

• Error 646 when you perform the update of windows

  I have windows 7 ultimate.  I'm getting error 646 when windows update tries to down load the following items:

  Update for Microsoft Office 2010 (KB982726), 64-bit edition.
  Update of security for Microsoft Office 2010 (KB2289078), 64-bit edition
  Update of security for Microsoft Publisher 2010 (KB2409055), 64-bit edition
  Update for validating file Microsoft Office 2010 (KB2413186), 64-bit edition
  Update for Microsoft OneNote 2010 (KB2433299), 64-Bit

  Error code '0 x 80070646, ' '646', or '1606' when you try to install Office updates

  http://support.Microsoft.com/kb/2258121>

  Suggest you download and save the fix it.

  Then close all open programs and browsers before running MSFix it 50461.msi.

• Error when trying to install the update of security for Microsoft Office PowerPoint 2007 (KB2596764)

  original title: update of security for Microsoft Office PowerPoint 2007 (KB2596764)

  I have problems to install an update for updating security for Microsoft Office PowerPoint 2007 (KB2596764). He keeps the slightest mistake on me.

  Display the exact error message that appears during the installation of the update.

  Try to download and then install the update manually and check to see if it helps?

  If this does not help, you can restart the computer in a clean boot state and see if it helps.

  http://support.Microsoft.com/kb/929135

  Once in the boot, try to install the update.

  Note: Returns to Normal startup mode once the diagnosis is made.

• Error message every time I try to download the update of security for Microsoft Office System 2007 (KB976321)

  Update of security for Microsoft Office System 2007 (KB976321)

  Download size: 1.4 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  A 2007 Microsoft Office System security vulnerability could allow arbitrary code to run when opening a file modified for malicious purposes. This update resolves this vulnerability.

  More information:
  http://support.Microsoft.com/kb/976321

  Help and Support:
  http://support.Microsoft.com/?ln=en-us

  http://www.Microsoft.com/downloads/en/default.aspx

  Put the KB numbers in the search at the above link > download them manually.

  If this does not solve it:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon

  Mick Murphy - Microsoft partner

• Why the update of security for Microsoft Office XP (KB2289162) still don't?

  I use Windows XP SP3 and have my update starts automatically.  Every day I got a message that the updates are available.  One of these updates is KB2289162.  However the update always fails.  How can I install this update?

  Hi MaryPastore,

  ·         You have Microsoft Office XP Service Pack 3 installed on the computer?

  ·         You get an error message or error code when the software update installation fails?

  You are able to install some other updates without any problems?

  I you suggest to temporarily disable the software running on the computer and then try to download and install the stand-alone package of the KB2289162 update and check if that helps.

  Update of security for Microsoft Office XP (KB2289162)

  Caution:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps.

• Get the error code 646 when trying to install the update of security for Microsoft Works 9 (KB2431831) _

  I tried to install the update of security KB2431831 for Microsoft Works 9 several times.  Whenever he fails and give me "Update error code 646 Windows has encountered an unknown error.

  See this response archived from a previous thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/21092c30-da71-4b7c-B242-1b32b28242bc >

• Impossible to solve problems with the update of security for Microsoft NET. Framework SP1 (KB2657424)

  I hope that Microsoft Support will answer this question:

  Homepage of Microsoft Windows Update is re - download and reinstall the same update (KB2657424).

  I was advised to try this link: https://support.microsoft.com/oas/default.aspx?gprid=6527 and it brought me to this page.

  I downloaded Microsoft Fixit 50202, installed and ran, but in "default" mode, since he warned that "aggressive mode" may disrupt other updates.

  It took me 8 hours (using a dial-up access provider) to get through all of the suggestions, including those in the following links:

  http://support.Microsoft.com/kb/910339

  http://support.Microsoft.com/kb/906602

  http://support.Microsoft.com/kb/2657424

  http://www.Microsoft.com/download/en/default.aspx

  I followed the suggestion of Microsoft to visit their site and check out "Review of my update history". Since January 11, 2012, when Microsoft first downloaded the update to in question (KB2657424), it failed. Microsoft has offered by clicking on the Red 'x' next to the 'update failed' to open the info on the reason that has been...

  Error code: 0x01

  Microsoft proposed the search for this error code in this list:

  http://support.Microsoft.com/ph/6527

  The error code is not in this list.

  Microsoft said then click "find solutions," "enter keywords" and click on "search". The result was this message: "Sorry, no result found not to match this criterion."

  As I mentioned earlier, since the first update "failed", I clicked several times on the icon (almost daily), which reappears constantly in my taskbar, asking me to "Reinstall", the update, and these measures have been recorded at yellow end of Microsoft. As I mentioned earlier, the update of security (KB2657424) is already listed in my Add/Remove programs as being installed. The "update history" reveals that a series of 'success' (KB2657424) facilities are recorded as well as "failures".

  I went to Windows Update Microsoft Web page to 'review my update history'.  After analysis of my PC, Microsoft has determined that (KB2657424) "has been downloaded and ready to install," with another update of IE (KB2618444). So I clicked both for "Quick Installation".

  When you are finished, I revisited the "update history review". (KB2657424) has been disabled with the green icon as 'successful', while at the same time, in the right box next, there was a message: "Install Updates (1).» So I clicked it, and another window open with the message that the "high priority update" (KB2657424) had to be installed. Yet once, I clicked on "Install updates". He ended with another successful window "Update."

  Then I clicked to "review update history", and it was registered under the name "successful." But the window beside her reappears at the same time: "Install Updates (1).» I have has. ... It was the 3rd time within an hour. 3 slices of the same update (KB2657424) are now disabled with the green icon as "successful"... but the window side "House of Windows Update" reappeared again with the same message: "Install Updates (1).»

  Then I followed the suggestion of Microsoft to type in the "run command" keywords to the day windows journal. Since the January updates up until this date in February the journal is 428 pages (transferred from Notepad to Microsoft Word.)

  Then I followed the instructions to download the update 'NDP35SP1-KB2657424 - x 86 .exe' (1.3 MB) directly from Microsoft link... http://www.microsoft.com/download/en/details.aspx?...28569.

  As instructed, I proceeded to manually install it in "Safe Mode".

  The result was this message:

  Patch installation (c:\35b7019bd0df08ac0003ec93627c\NDP35SP1-KB2657424.msp) failed on product (Microsoft .NET Framework 3.5 SP1). MSI log: Microsoft .NET Framework 3.5 - KB2657424_20120209_020143359 - Msi0.txt

  I scanned the PC with anti-virus and anti-malware programs, and none of them found any malware or virus in the way of updates from Microsoft. "The 'update' where it is saved in the Microsoft Download link is the only and unique" ""NDP35SP1-KB2657424 - x 86 .exe." The "Update" as it is installed in my Add/Remove programs in the Control Panel is the same.

  However, both "Windows Update Home" to Microsoft Page as well as in my BONES, the "update" continues to override all commands of Windows. Another odd fact, is that this "update" that keeps re - download and reinstall itself is actually partitioned into three parts, and I wonder if they may be "clones". Maybe the Windows Installer Service does not know where to place them, or what to do with them. These are three:

  MSIPatchRegFix - X 86 .exe_

  NDP35SP1-KB2657424 - 86.exe_

  NDP35SP1-KB2657424 - 86.exeQ

  Hi Jeine,

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 4: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

• The update of security for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2538242)

  I had reinstalled for more than five times, but he continues to appear in new updates is available.

  Hi lissettevalentin

   

  If you have the update already installed on your computer and always offered several times the update then I suggest refer you to the Microsoft article provided below and follow the steps in resolution-

  http://support.Microsoft.com/kb/910339/

   

  I hope this helps.