I get errors saying that the system memory is low.

Similar Questions

• When I run microsoft fix it I get error saying that the Recycle Bin is corrupted and not to set

  folders and programs disappear or stop work system restore will not work

  Hello

  ·        What Microsoft Fix it are you trying to run on the system and why you try to run the patch on the system?

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  ·        What is the exact error that you are experiencing?

  I suggest you follow the steps mentioned below.

  Method 1:

  I suggest you follow the steps mentioned in the article below and let us know if the problem is resolved.

  Error message: the trash on C:\ Is damaged or invalid. Don't you want to empty the Recycle Bin for this...

  http://support.Microsoft.com/kb/297760

  Method 2:

  Apart from that, I suggest you check in the clean boot state, if the problem persists. Follow the steps mentioned in the article below.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Method 3:

  I suggest to run a SFC (System File Checker) scan on the system and then check if the problem is resolved.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

   

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Get a large red cross saying that the system is not operational. Went and checked in services.msc and the setting says Automatic (delayed).

  Original title: necessary emergency aid

  Windows lost completely. After trying a variety of things, I finally got one to start, but my entire system had returned back to the year 2012.

  After updating my anti-virus and other security programs, I tried to check the updates of Windows, but I get a large red cross saying that the system is not operational. Went and checked in services.msc and the setting says Automatic (delayed). You run the Windows Update Troubleshooting Wizard and he said that he had set things so I rebooted to try check update again. However, I get the same message.  There is nothing showing at all when I click "update history", but check "updates installed" shows things are fine until 2012.

  Please, how can I get my system again right?

  Restart your computer and wait 30 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode. If the report is in one language other than English, please indicate the language.

  Please download and share with everybody fresh copies of your System log and journal of the Application (two files) of your event viewer on your disc one and post a link here. You can delete any previous copies of your OneDrive records.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• I bought this HP Mini with Windows 7 Starter already installed 110-3500. After years of 1 1/2 to use it, I get a message saying that the system is original noy. How can I fix?

  I bought this HP Mini with Windows 7 Starter already installed 110-3500. After years of 1 1/2 to use it, I get a message saying that the system is original noy. How can I fix? Product no. 00342-OSM-8992752-30008

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• During upgrade Adobe Creative Suite CS4 ME in Adobe Creative Suite CS5.5 Design Premium, I get an error saying that the serial number is not an eligible product, please try another. I used to be able to get a code for the customer service, but I can't

  During upgrade Adobe Creative Suite CS4 ME in Adobe Creative Suite CS5.5 Design Premium, I get an error saying that the serial number is not an eligible product, please try another. I used to be able to get a code for the customer service, but I can't chat. Please advise!

  MoeGhazal I have reviewed your account and it seems that you have upgraded to a volume license CS4 Design Premium for an upgrade of retail Design Premium 5.5.

  I also shows that you have made two purchases of CS5.5 Design Premium, but the second purchase was cancelled.  Make sure that you use the serial number that ends in 7886.

  If you are using the correct serial number, then it is likely, that the installer won't recognize your serial number of volume license CS4 as being valid for upgrade.  If you can contact our support team you can be traversed through an unlocking procedure to allow you to proceed with the installation.  You can contact our team of support directly in Contact with the customer.  You can try to install a web browser, you have not previously used.  It of probably a toolbar or other software applications affect your ability to access the media cat successfully.

  If you are unable to reach our support team, then please check your account information is accurate.  If you can please then update this discussion after the confirmation of this so I can ask a member of our support team contact you directly.

  I would recommend again reaching out directly if possible it will be the most effective method to resolve your current error.

• In the Amazon, I get error message that the page is not redirecting properly

  When I try to view the details of an item in the Amazon, for example, a book, I get an error saying that the problem loading page. The page is not redirecting properly Firefox has detected that the server redirects the request for this address in a way that will never end.

  Year example of the URL causing this problem is https://www.amazon.co.uk/gp/product/0692394028?redirect=true & redirect = true & redirect = true & redirect = true & redirect = true & redirect = true & redirect = true & redirect = true & redirect = true & ref_ = gb1h_img_m-3_4447_e77918ec & smid = A3P5ROKL5A1OLE

  I tried an update of Firefox, I tried to remove and reinstall it. I tried to delete cache and cookies, but I still get the same problem. I use v42.0.

  Any help would be appreciated.

  Thanks for your reply.

  However, now that I have a working stable system I will not even try 42.0 but will wait until a newer version is released. Back to 41.0.2 also stopped all site accidents I knew (and reported) with 42.0 - sort of IMO, there are certainly issues with v42.0

• I get a notice that my virtual memory is low.

  I get a notice that my virtual memory is low.  -What this means and what I can do? I use windows xp

  If you mean that you see a message like this:

  Virtual memory minimum too low: your system is low on virtual memory.  Windows is increasing the size of your virtual memory paging file.

  This means that Windows XP is to let you know that he does his work.  The message is not an error message - this is an informational message.

  If XP thinks that the size of the swap file (usually c:\pagefile.sys) is too small to accommodate your day-to-day transactions, it will adjust the paging file to expand the pagefile and display this message as it does.  It is not necessarily a 'problem', but the message is boring.

  Sometimes, the message indicates someone was tampering with the XP of the paging file settings to try to solve another problem that usually has nothing to do with their paging file and resolve things inefficiently.

  This could mean that the settings have been adjusted for certain values that don't make sense for the configuration of the system.  Unless we know the system better, you can't just pick certain values out of the air and that your system behaves effectively.  You might not see the message again, but this does not mean that the settings are correct.

  This could mean that the settings have never been properly in the first place when you first install of XP and things must be properly configured.

  Sometimes, as your system configuration changes over time and other applications are running and get bigger, you may add additional RAM to your system to accommodate things (or run the number of requests).

  At least that learn you more about managing memory than Windows XP, it is usually best to simply let XP manage the size of your virtual memory paging file.

  To see what your current, make settings right click post work, properties, advanced, performance settings, Advanced tab, virtual memory, and then click the button change.

  Make a note of the current settings in case you need to change their return more later.

  The best setting for the size of swap file is usually going to be:

  System managed size

  Right click my computer, properties, Advanced tab, Performance... Settings, Advanced tab, virtual memory... Change.

  Set the paging file size on:

  System managed size

  Don't forget to click on Set (to be defined), OK (several times) and then restart your computer.

  Windows XP will attempt to affect a swap file approximately 1.5 times the total amount of RAM installed on your system.  To manage the size of paging file Windows XP is enough for most configurations.

  If your system is not set to the size of the managed system, you must determine how it changed and why (usually a bad reason), make a note of the current settings to change them back later if necessary, and then change the setting to the size of the managed system, click on the Set button and then click on apply to apply the changes (you will be asked to restart).

  "Because someone told me to" is not a good reason to start making adjustments to the size of pagefile.  Setting just above to enlarge it by an arbitrary value can ease the symptoms of the problem and stop message, but may not result in the best configuration for your system.

  If you want your system to operate as efficiently as possible, you must understand what is happening and fix it properly and not only begin to try things or make some arbitrary adjustments.

  The size of the pagefile can really need adjustment, but you should at least try to know what you're doing and why you need to do.  It is unlikely that anyone can tell you how to adjust your settings properly without more information.

  If you don't know what are the best settings, or if you are not sure what should be your settings, follow these steps:

  Click Start, run and enter in the box:

  Msinfo32

  Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the results here.

  There will be some personal information (such as the user name and the name of the system), and what appears to be personal information for you, simply delete the personal information of the pasted information.

  This minimize back Q & A and eliminate the guesswork and assumptions.

  Without this information system, suggestions for adjustments are more likely to make only assumptions.

• When a message to Facebook game appears who says that my virtual memory is low

  most of the time when iam plying a game on facebook that show sign for me (the virtual memory is low...) what does that mean?

  Virtual memory is using xp memory on a hard drive as ram memory.

  To reset, R.click my computer, properties, advanced, performance, virtual memory,

  selected change, with C: button, click on 'letting the system manage' the value set 2 X close

  outside. If you never add a slave hd, do the same as above for both, which adds a performance.

  and eliminates some hd on C: drive fragmentation...

• What is shrader 2? I get an error saying that the sound is no longer supported

  I tried to install tom ARMA2 3 days and get the error saying shrader 2 is longer supported Wharton is?

  If you receive a message that your graphics card does not support shader model 2, make sure you have the latest drivers from the manufacturers Web site.

  If this does not work, you will not be able to meet the minimum requirements for the game. Verify if you do or not and if you contact the developer for assistance.

• Getting error indicating that the configuration is incorrect at the opening of most of the programs and games.

  Original title: Hello Microsoft publish :/

  Hi there, I recently reformatted my computer in the way that it used to be and its windows XP SP3 and now im getting an error every time I open programs, whatever it is, and above all my games say that "this application has failed to start because the application configuration is incorrect. reinstalling the application may fix this problem. "However, for this to all my games and these are games I just downloaded and installed ive tried reinstalling them what might be the cause of this?

  Ive tried so many different things and I can't do things...

  Hi Shahiko,

  Try to connect as an administrator, and then install the game. If you use the Welcome screen, press ALT + CTRL + DELETE (all three buttons at the same time) twice, you get a classic login prompt. Enter the username as admin and password (if you have one). Try to install the game, should solve the problem.

  I hope this helps.

• Cannot start Windows install error "3 that the system cannot find the path specified".

  Original title: problem with Windows install

  the installer of Windows won't work, made sure that it's automatic in services, but when I click start it says error 3, the system cannot find the path specified

  Hello

  1. Did you changes to the computer before the problem occurred?

  Method 1: I suggest you unregister and re - register the windows setup program and check if that helps you. To do this, please follow the steps below:

  Unregister and register the Windows Setup program again

  (a) click Start, click run and then type cmd in the dialog box, and then click command prompt.

  (b) at the command prompt, type the following and press ENTER after each line:

  MSIExec /Unregister

  MSIExec/regserver

  Method 2:
  Also I suggest you to update your installation Package of Windows with the latest version of Windows Installer available in the link below.

  Windows Installer 4.5 Redistributable:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Hope this information is useful.

• Get the message that the virtual memory is low in XP

  I often receive low virtual memory, which is the reason why and how can I solve this problem. I have 1 GB of ram

  It depends on what you do when you get the message. Start reading here:
  http://www.Google.com/search?q=virtual+memory+is+low&ie=UTF-8

• When you try to use Windows Mail, I get an error saying that the host was not found.

  I was never successfully used windows mail before, and when I do, I get an error - host b is not found, I created my account and don't know what I did wrong

  original title: problem with windows mail

  Windows Mail: Setting up an account of end-to-end
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish

  Please post any error message in its entirety. You can left click on it to highlight then right click to copy and then paste in this thread.

• Dune 200 installation gives an error saying that the sound is not compatible and to check if 32 or 64 bit

  Installation of Windows 95/98 games, 32-Bit on a 64-bit Windows 7.

  Features of the laptop:

  Intel Core i3 - 370 M robot
  15.6 HD LED LCD
  ATI Mobility Radeon HD 5470 graphics card
  4 GB of DDR3 memory
  1 T HARD DRIVE
  DVD-Super Multi DL Drive
  Windows 7, 64-bit

  I have the files, install an old game called Dune 2000, but when I try to install it says not compatible, Windows
  Check, it takes weather 32-bit or 64-bit, but with common sense, there are 32 Bit, right? I tried the windows
  compatibility and still nothing. I am trying to load for the hard drive. Also tried to load as an admin. Any help?

  95-98 games often have 16-bit installers. It is the main
  lies of the incompatibility.
  Sometimes, you can copy a game from a 32-bit to computer
  64 bit machines and it will be run.
  In this case you also need a noCD patch
  http://MegaGames.com/games/dune-2000#fix
  Other games totally incompatible options-

  BACK BOX - the link below is for an application that did BACK BOX a little more
  user friendly-
  D - Fend Reloaded: overview

  Or a virtual Macine - there are others but-

  | MG | Download VirtualBox 4.1.10.76836

  Overview of VirtualBox

  VMware Player: Run Windows 7, Google Chrome OS - free download for a virtual PC

  See also GOG for more oldies who install with BACK box automatically.
  http://www.Gog.com

  .

• I get errors saying that there is a problem with this web site security certificate.

  original title: IT SECURITY of IS a PROBLEM WITH THIS CERTIFICATE WEB SITE,.

  WHAT IS... THERE IS A PROBLEM WITH THE SECURITY CERTIFICATE OF THE WEB SITE, WHAT I DO, WHAT I DOING WORNG?  I'M A 60 +. I HAVE THIS PC for a long TIME, I HAVE CHANGE? Thank you

  Do not do no matter what (in fact, you can't), and you didn't do anything wrong.  This warning message simply means the administrator of the web site that you visit not bothered to renew its web site in due course certificates.  If it's a web site that you know and trust, you can select the option "Continue (not recommended)" will continue beyond the warning.