I get "no writable calendars are configured for invitations...» "I have 2 calendars both are not read-only

Similar Questions

• No writable calendars are configured for invitations

  A few weeks ago I created the lightning (with the great help of the participants to the forum of TB) so that when I get an e-mail meeting invitations, I could accept, and they show up on my Google Calendar. A week ago, it stopped working.

  When I receive an invitation, there is no button to accept. Instead, there is a notice that says "no writable calendars are configured for invitations, check the properties of calendar.

  I made sure that Google calendar is present and selected in the tab of the Flash. I checked the calendar properties, and the email address where I receive invitations to meetings (my work email) is set as the e-mail address in the Properties dialog box. And the checkbox is enabled to turn on the calendar.

  Thanks in advance, does anyone have suggestions to get TB/Lightning to work as it did before? That is to be accepted invitations to meetings and automatically add them to my calendar?

  Thank you!

  Well, you can then mark your message as 'Solution' for the topic?
  Thank you.

• try to install iTunes on my windows 7, but get windows installer services are not accessible... pls help

  try to install iTunes on my windows 7, but get windows installer services are not accessible... pls help

  Transfer your question here: http://social.answers.microsoft.com/Forums/en-US/w7programs/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How can I reinstall Photoshop CS6 on my new computer when to enter my KEY I continually get the message "you are not connected to internet?

  I bought a new computer. I reinstalled my Photoshop CS6 leave a DVD, but when I entered the serial number I get the message "you are not connected to internet" while I was.  I have "pussy" with Naveen on customer support and after 20 minutes he told me to go to the following link and reinstall through it: http://www.adobe.com/sea/downloads/other-downloads.html

  
  

  This led to the same exact scenario only it took me over 2 hours to download CS6. I then contacted the 'Support Portal online' to ask for additional help. It was 2 days ago and I still have to be contacted and assisted with my problem. Any help or ideas out there?

  Here is what is in the file "hosts":

  127.0.0.1 localhost

  127.0.0.1 activate.adobe.com

  127.0.0.1 practivate.adobe.com

  127.0.0.1 ereg.adobe.com

  127.0.0.1 activate.wip3.adobe.com

  127.0.0.1 wip3.adobe.com

  127.0.0.1 3dns - 3.adobe.com

  127.0.0.1 3dns - 2.adobe.com

  127.0.0.1 adobe - dns.adobe.com

  127.0.0.1 adobe-dns - 2.adobe.com

  127.0.0.1 adobe-dns - 3.adobe.com

  127.0.0.1 ereg.wip3.adobe.com

  127.0.0.1 activate - sea.adobe.com

  127.0.0.1 wwis-dubc1 - vip60.adobe.com

  127.0.0.1 activate - sjc0.adobe.com

  127.0.0.1 lm.licenses.adobe.com

  127.0.0.1 192.150.14.69

  127.0.0.1 192.150.18.101

  127.0.0.1 192.150.18.108

  127.0.0.1 192.150.22.40

  127.0.0.1 192.150.8.100

  127.0.0.1 192.150.8.118

  127.0.0.1 209-34-83 - 73.ood.opsource .net

  127.0.0.1 3dns - 1.adobe.com

  127.0.0.1 3dns - 4.adobe.com

  127.0.0.1 3dns.adobe.com

  127.0.0.1 activate - sea.adobe.com

  127.0.0.1 activate.wip.adobe.com

  127.0.0.1 activate.wip1.adobe.com

  127.0.0.1 activate.wip2.adobe.com

  127.0.0.1 activate.wip4.adobe.com

  127.0.0.1 adobe-dns - 1.adobe.com

  127.0.0.1 adobe-dns - 2.adobe.com

  127.0.0.1 adobe-dns - 3.adobe.com

  127.0.0.1 adobe-dns - 4.adobe.com

  127.0.0.1 adobe - dns.adobe.com

  127.0.0.1 adobe.activate.com

  127.0.0.1 adobeereg.com

  127.0.0.1 crl.verisign.net

  127.0.0.1 ereg.wip.adobe.com

  127.0.0.1 ereg.wip1.adobe.com

  127.0.0.1 ereg.wip2.adobe.com

  127.0.0.1 ereg.wip3.adobe.com

  127.0.0.1 ereg.wip4.adobe.com

  127.0.0.1 hl2rcv.adobe.com

  127.0.0.1 ood.opsource.net

  127.0.0.1 practivate.adobe.ipp

  127.0.0.1 practivate.adobe.newoa

  127.0.0.1 practivate.adobe.ntp

  127.0.0.1 tss-geotrust - crl.thawte.com

  127.0.0.1 wip.adobe.com

  127.0.0.1 wip1.adobe.com

  127.0.0.1 wip2.adobe.com

  127.0.0.1 wip3.adobe.com

  127.0.0.1 wip4.adobe.com

• How to make all the fields on one page read only (for the recipient) without having to make each field read-only?

  How to make all the fields on one page read only (for the recipient) without having to make each field read-only?

  Hello Jmbtexas4,

  By default, you will need to individually click on the fields of the form and check the 'read only' and save it. From now on, it is not possible to select all together and make the changes.

  -Usman

• When I try to run Microsoft Safety Scanner, I get an error signatures are not signed error code: 0x8050A005.

  When I try to run Microsoft Safety Scanner, I get an error that the signatures are not signed (x8050A005)). Can someone help me with this?

  I suggest the Windows Defender update and run full system scan with it. Windows 8 build already with Windows Defender, which is anti-virus and Anti-Spyware.

• DVD on Satellite 1800 movies are not read correctly

  I bought a Satellite 1800. One with processor Intel 1.1 ghz, 256 MB ram and 20 GB HARD drive.

  The DVD drive seems to work fine, but not with DVD movies. I tried various movie playing software, and each of them are not played correctly in the graphics and sounds. For me, it looks like a problem with the graphics display power rather than drive. If this machine must be able to play movies with standard charts, etc.?

  Thank you.

  Hello

  Firstly: have you installed the LATEST drivers offered on the download Drivers Toshiba site? Must check out and make updates if not already done. The other thing is: you have tried different players and they didn t give you the you´ve of quality of reading expected.

  So now try THIS player: www.videolan.org

  VLC player wins the best out of your equipment of machines even if you´ve had an older system. I played movies Divx and DVD on pentium 3 and pentium 2 machines, so your machine should theoretically able to do.

  Welcome them

• configuration for windows live is side by side will not

  can't get to work, said side by side configuration does not?

  Hello

  For the different Forums for Windows Live Applications, select the link below
   
  Welcome to Windows Live Solution Center
  http://windowslivehelp.com/

• Why what I get a message "You are not connected to Internet" even after having to connect every time?

  Why can't my computer not just automatically start when I turn it on and connect using my password, instead of having to go through a separate step to connect to Internet via VZ access? Most of my friends just click on IE or Firefox, then right away. Is there a way to stay constantly connected?

  I gather from your question that you are using Verizon DSL with PPPOE connection (which requires a logon).  The usual way to automate this process is-
  -If you are connected directly to a DSL modem or modem/router combination unit, create a profile in the Autologon feature.
  -If you use a router connected to a DSL modem, configure the log on your router.

• Dreamweaver CC 2015 offers to get the files that are not in my root folder

  Dreamweaver CC 2015 offers to get the files, but when I manually check the folder, where it shows some files during the synchronization process, there is nothing. Why?

  Clear your cache.

  Clear Cache corrupted in DW

  http://forums.Adobe.com/thread/494811

  Nancy O.

• the .mp4 files are not read correctly on 40TL968

  Hello

  A couple of weeks, I bought this TV and I could play via USB or DLNA .mp4 files. But for these past few days, whenever I try to play .mp4 files, they do not play correctly. They get stuck between the two - I mean the video stops and plays automatically. This happens every time, no matter I'm playing with USB and DLNA.

  But if I play .avi, they play effortlessly and flawlessly.

  No idea why this problem with playback of the .mp4 files?

  Thank you
  D

  > I have reset the TV, but still it did not work. He has yet to play mp4 files

  Have you done this correctly?
  I mean that you need to rest at default settings. In this case all the options that have been changed, could be the default value.
  To do this, go to:
  Configuration of the system-> Reset TV
  When authorities set turn it back on, the Quick Setup is displayed. Press OK to move the Setup program and perform an auto tune.

  In addition the user guide provides a list of supported formats (page 93) Media Player
  There is a list of the formats supported for music and movie files:

  _Music_ mp4 files are supported.
  The extension of files should be .m4a
  Audio codec should be MPEG-2/4 LC - AAC
  The maximum number of files in the folder: 1000

  _Movie_ mp4 files:
  The file extension supported: .mp4 or .m4v
  Supported video codec: H.264 (MPEG-4 AVC), MPEG-4 part12, 14
  Taken audio codec supported: MPEG-1/2 Layer 3, MPEG-2/4 LC - AAC / MPEG-4 HE - AAC

• DVD/CD driver does not properly, the discs are not read.

  I tried different discs and none are read which is very annoying, because I can not install my new printer! When I checked the driver, the following message is displayed:

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

  I click for solutions and he's looking for a few seconds and then nothing happens. I tried it 3 days ago and still today, but it still does not work, can I do?

  Thanks in advance for any help

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.

  Normally the above will solve this problem otherwise working your way down through them, even if you did
  them before.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Substitution strings are not read

  Hello

  I'm working on APEX 4.2.2 and Oracle 11 g.

  We ask a how to download attachments of a report query. We use a v ('APP_ALIAS') substitution string to the procedure, which is not playing. Is there a limitation that a procedure should be called from process only so the substitution string would be read? Please help me with this.

  Thank you

  Shoaib

  2812672 wrote:

  The procedure is called from a report interactive/Classic Apex, who only considers current Apex session? They are read flat when I call the same procedure of a process page apex.

  How is it used in the process of the page? It's obviously in a context of APEX session: the procedure is called by a block anonymous PL/SQL run during show page APEX or accept treatment.

  When the user clicks on the link in the report, it's the browser that calls the procedure, not APEX. Look at the URL of the link: it does not use the APEX "f?" p =... "signature of procedure; It is not an APEX session ID; It is not executed in a context of APEX.

• Forms are open read-only format

  Hello
  
  We are trying to initializae budget with real data of the previous year, but after that run scripts. The form opens in a single reading format. We are loggin as an administrator and have also checked setting forms.
  
  
  No idea why this is happening.
  
  Thank you

  Have you checked the script start and end year/period members

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• When you delete an email, often both enamel stressed I want to delete and the following e-mail are both deleted, not one only. How to change that?

  When I delete an email which is highlighted and displayed on my screen, several times but not always, the following e-mail that is displayed is also deleted. It just started doing this a few weeks ago. How to return to the removal of all email that appears? I appreciate all help.

  Try a new/other mouse. Looks like yours is to give a double click when you just click.
  If you use the DEL key on the keyboard is only the removal of a message?