No writable calendars are configured for invitations

Similar Questions

• I get "no writable calendars are configured for invitations...» "I have 2 calendars both are not read-only

  I have my calendar Setup to synchronize with google. Since I did it I receive this notification of receipt of an invitation rather than buttons ' Accept, decline,...» ».

  Properties of calendar:
  location googleapi: / /...
  Refresh every 30 minutes
  Read-only is unchecked
  Display reminders is checked

  Is the e-mail address assigned to the Google calendar that which the invitation was sent to?

• Thunderbird 38.3.0: No writable calendars are configured for the invitations with the provider for Google Calendar 1.0.4

  Hello

  I searched many hours today in the internet and your forums, but it seems that this problem is not solved yet:

  No writable calendars are configured for the invitations with the provider for Google Calendar.

  My Thunderbird is 38.3.0 and the provider for Google Calendar 1.0.4.

  I put calendar.google.enableEmailInvitations; true but it did not help. I also tried [email protected]... @googlemail.com. Calendar works fine, it syncs, I see all the entries etc. But I can't accept invitations even IF she must have write access.

  What can I do? Is there a solution for this?

  Thank you!
  Daniel

  Use CalDAV here to access Google Calendar via lightning. I have no experience with the add-on of the provider.
  In any case, it is my understanding that you must assign an e-mail address to a calendar in order to be able to accept the invitations for this calendar. I see that in your screenshot.
  You can try to remove the Google calendar in lightning and re-create it. Given that all the data is on the server nothing will get lost.
  Or you may want to try CalDAV.
  https://blog.Mozilla.org/calendar/2013/09/Google-is-changing-the-location-URL-of-their-CalDAV-calendars/

• We have configured replication vsphere in our environment and when replication is triggered according to the OFR start us below the questions on the virtual machines that are configured for replication

  Question: We have configured replication vsphere in our environment and when replication is triggered according to the OFR start us below the questions on the virtual machines that are configured for replication.

  Version for esxi: Patch 5.1 level 7

  Virtual center of version 5.1

  Source of storage - IBM v7000

  Destination storage - Hitachi

  
  Questions:
  Events of breach RPO
  Consolidation for the VM disk failure
  Delta abandoned events
  Time change events
  NTFS error and warning (event ID: 137, 57)
  RDP disconnect and ping does matter
  Standby error
  Volsnap error
  Stop the server and offline issue
  Install vmtools emits automatically

  well, in this case, we need to disable the standby of the end of the replication.

  So that everything in triggering replication does not trigger the snapshot of the suspension.

  Then test the if you get these errors.

• All the desktop icons are configurΘ for dΘmarrer with Internet Explorer

  original title: cannot open programs.

  Each program on my desktop has the same icon (Internet Explorer).  When I click on any of them, it opens "display and track your downloads" is the program I want on the page that opens, but I can't access this program.

  The only program I can access Internet Explorer, which works very well.

  If I'm going to start--> all programs, I noticed everything, but once again, they have all the knowledge icon.  And cannot be opened.

  How can I get the icons on the desktop to go back ot their original photo?

  Hello

  
  1. what operating system is installed on the computer?
  2. were there any changes (hardware or software) to the computer before the show?
   
  Run the FixIt and see if the problem is resolved.
  http://support.Microsoft.com/kb/950505
  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us
   
   
  Hope this information helps.

• Devices configured for authentication under ACS

  Hi friends,

  Would like to know how many devices can be configured for authentication under ACS version 5.6.0.22 (Cisco Secure Network Server 3415).

  I'm not able to find the same everywhere.

  Concerning

  JN

  Hello

  It depends on the license that you install on the ACS 5.6.

  All deployments of 5.6 ACS supports customers AAA 100 000, 10,000 network, 300,000 users and 150 000 host device groups. 5.6 ACS collector server log can handle 2 million records per day and 750 messages per second for stress sent by the various nodes of ACS in the deployment on the server of log collector.

  Please visit this link:

  http://www.Cisco.com/c/en/us/TD/docs/net_mgmt/cisco_secure_access_contro...

  With the Base license, a Cisco Secure ACS 5.6 appliance or virtual machine software can support the deployment of up to 500 devices of access network (DNA) such as routers and switches. These are not authentication, authorization and accounting clients (AAA). The number of network devices is based on the number of unique IP addresses that are configured. The limit of 500-device is not a limit for each individual device or the instance, but a limit of scale that applies to a set of instances of Cisco Secure ACS (primary and secondary instances) that are configured for replication.

  The optional add-on of large deployment license allows deployment to support over 500 network devices. Only one major deployment license is required by the deployment because it is shared by all instances.

  Please visit this link:

  http://www.Cisco.com/c/en/us/products/collateral/security/secure-access-...

  Kind regards

  Aditya

  Please evaluate the useful messages.

• Router ignores the policies configured for VPN

  These are the policies that are configured for phase 1:

  crypto ISAKMP policy 1

  BA 3des

  md5 hash

  preshared authentication

  Group 2

  lifetime 28800

  !

  crypto ISAKMP policy 3

  BA 3des

  md5 hash

  preshared authentication

  Group 5

  lifetime 28800

  !

  crypto ISAKMP policy 5

  BA aes

  preshared authentication

  Group 2

  !

  crypto ISAKMP policy 7

  BA aes

  preshared authentication

  Group 2

  lifetime 28800

  !

  crypto ISAKMP policy 9

  BA aes 256

  preshared authentication

  Group 2

  lifetime 28800

  However, this is what tells me my debug:

  16 Jul 18:23:19: ISAKMP: (0): pair found pre-shared key matching 67.216.78.20

  16 Jul 18:23:19: ISAKMP: (0): pre-shared key local found

  16 Jul 18:23:19: ISAKMP: analysis of the profiles for xauth...

  16 Jul 18:23:19: ISAKMP: (0): audit ISAKMP transform 1 against the policy of priority 1

  16 Jul 18:23:19: ISAKMP: DES-CBC encryption

  16 Jul 18:23:19: ISAKMP: MD5 hash

  16 Jul 18:23:19: ISAKMP: group by default 2

  16 Jul 18:23:19: ISAKMP: pre-shared key auth

  16 Jul 18:23:19: ISAKMP: type of life in seconds

  16 Jul 18:23:19: ISAKMP: life (IPV) 0 x 0 0 x 0 0x1C 0x20

  16 Jul 18:23:19: ISAKMP: (0): free encryption algorithm does not match policy.

  16 Jul 18:23:19: ISAKMP: (0): atts are not acceptable. Next payload is 0

  16 Jul 18:23:19: ISAKMP: (0): audit ISAKMP transform 1 against the policy of priority 3

  16 Jul 18:23:19: ISAKMP: DES-CBC encryption

  16 Jul 18:23:19: ISAKMP: MD5 hash

  16 Jul 18:23:19: ISAKMP: group by default 2

  16 Jul 18:23:19: ISAKMP: pre-shared key auth

  16 Jul 18:23:19: ISAKMP: type of life in seconds

  16 Jul 18:23:19: ISAKMP: life (IPV) 0 x 0 0 x 0 0x1C 0x20

  16 Jul 18:23:19: ISAKMP: (0): free encryption algorithm does not match policy.

  16 Jul 18:23:19: ISAKMP: (0): atts are not acceptable. Next payload is 0

  16 Jul 18:23:19: ISAKMP: (0): audit ISAKMP transform 1 against policy priority 5

  16 Jul 18:23:19: ISAKMP: DES-CBC encryption

  16 Jul 18:23:19: ISAKMP: MD5 hash

  16 Jul 18:23:19: ISAKMP: group by default 2

  16 Jul 18:23:19: ISAKMP: pre-shared key auth

  16 Jul 18:23:19: ISAKMP: type of life in seconds

  16 Jul 18:23:19: ISAKMP: life (IPV) 0 x 0 0 x 0 0x1C 0x20

  16 Jul 18:23:19: ISAKMP: (0): free encryption algorithm does not match policy.

  16 Jul 18:23:19: ISAKMP: (0): atts are not acceptable. Next payload is 0

  16 Jul 18:23:19: ISAKMP: (0): audit ISAKMP transform 1 against the policy of priority 7

  16 Jul 18:23:19: ISAKMP: DES-CBC encryption

  16 Jul 18:23:19: ISAKMP: MD5 hash

  16 Jul 18:23:19: ISAKMP: group by default 2

  16 Jul 18:23:19: ISAKMP: pre-shared key auth

  16 Jul 18:23:19: ISAKMP: type of life in seconds

  16 Jul 18:23:19: ISAKMP: life (IPV) 0 x 0 0 x 0 0x1C 0x20

  16 Jul 18:23:19: ISAKMP: (0): free encryption algorithm does not match policy.

  16 Jul 18:23:19: ISAKMP: (0): atts are not acceptable. Next payload is 0

  16 Jul 18:23:19: ISAKMP: (0): audit ISAKMP transform 1 against the policy of priority 9

  16 Jul 18:23:19: ISAKMP: DES-CBC encryption

  16 Jul 18:23:19: ISAKMP: MD5 hash

  16 Jul 18:23:19: ISAKMP: group by default 2

  16 Jul 18:23:19: ISAKMP: pre-shared key auth

  16 Jul 18:23:19: ISAKMP: type of life in seconds

  16 Jul 18:23:19: ISAKMP: life (IPV) 0 x 0 0 x 0 0x1C 0x20

  16 Jul 18:23:19: ISAKMP: (0): free encryption algorithm does not match policy.

  16 Jul 18:23:19: ISAKMP: (0): atts are not acceptable. Next payload is 0

  16 Jul 18:23:19: ISAKMP: (0): audit ISAKMP transform 1 against priority policy 65535

  16 Jul 18:23:19: ISAKMP: DES-CBC encryption

  16 Jul 18:23:19: ISAKMP: MD5 hash

  16 Jul 18:23:19: ISAKMP: group by default 2

  16 Jul 18:23:19: ISAKMP: pre-shared key auth

  16 Jul 18:23:19: ISAKMP: type of life in seconds

  16 Jul 18:23:19: ISAKMP: life (IPV) 0 x 0 0 x 0 0x1C 0x20

  16 Jul 18:23:19: ISAKMP: (0): offered hash algorithm does not match policy.

  16 Jul 18:23:19: ISAKMP: (0): atts are not acceptable. Next payload is 0

  16 Jul 18:23:19: ISAKMP: (0): no offer is accepted!

  16 Jul 18:23:19: ISAKMP: (0): phase 1 SA policy is not acceptable! (local 65.118.143.194

  distance 67.216.78.20)

  The router is completely ignoring all configured policies and try with anything else than the default. Is this a bug?

  Hi Jason,

  What you see is the policy of isakmp that offers the peer and it is compared to the isakmp policies that you have configured on your router.

  You can add other isakmp policy corresponding to this proposal to see if the phase 1 ends.

  crypto ISAKMP policy 2

  the BA

  preshared authentication

  md5 hash

  Group 2

  life 7200

  What is the camera peer?

  Kind regards

  Loren

• iCal 'Get Info' is grey for the blue calendar; Other calendars are very good. Model name: iMac model identifier: iMac9, 1

  iCal 'Get Info' is grey for the blue calendar; The other color calendars are very good.

  I deleted the file 'com.apple.iCal.plist '... No luck.

  Please notify. Thank you, Roger
  

  
  

  
  

  Presentation of the material:

  Model name: iMac

  Model ID: iMac9, 1

  Processor name: Intel Core 2 Duo

  Processor speed: of 2.66 GHz

  Number of processors: 1

  Total number of cores: 2

  L2 Cache: 6 MB

  Memory: 4 GB

  Bus speed: 1.07 GHz

  Boot ROM version: IM91.008D.B08

  Version of the SCM (System): 1.44f0

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode

• Despite my Gmail that is configured for IMAP and continually confirming that my login and my password are correct, that it will not find my account

  My e-mail and password are correct when I try to configure my mail in Thunderbird, but I always get the error message: Thunderbird could not find your e-mail account settings.

  I have also entered with Gmail and was assured that it is configured for IMAP

  Thank you.

• Transferred to Palm Desktop for Palm Pre event calendar are incorrect

  My old phone, a Center, has been synchronized using Palm Desktop 6.2.1 on Vista. I used the data migration tool, and all my data transferred to my Palm Pre. (Just directly Palm Desktop > Palm Pre).

  The only problem is that a lot of my events are not on the correct days (ex: an event in Palm Desktop comes Sunday, now appears on my Palm Pre Monday).

  I don't have the time to sort out again all my calendar events since this is the case of random events.

  Other complaints that I have on the calendar, it's that the birthdays of my contacts do not appear as events, even those in Agenda facebook. In addition, it would be nice to be able to classify the events and color coding in the calendar.

  For transfers of schedule of the Palm Desktop, upgrading your Palm Desktop version 6.2.2 (rather than just the 6.2 shown in the migration instructions) will prevent specific annual date all day events, such as birthdays and other events, to appear on the wrong day.

  He let still one day of the week of the annual events, like Thanksgiving, the demand for each 1 month instead of every 12 months.  These must be set manually on the meadow.

  Alan G

• How a policy without moving can be configured for iSCSI traffic in Nexus 5548UP? Are there side effects?

  How a policy without moving can be configured for iSCSI traffic in Nexus 5548UP? Are there side effects?

  Hello

  Side effect depends on your network config, but I can tell you how config no iscsi traffic reduction policy...

  We have three-stage configuration in link below is image...

  1. QOS class - for the first traffic ranking

  2 queue (INPUT/OUTPUT) - this is where you book or traffic police

  3 Netwrok QOS - where you key or setting MTU for classified traffic at the bottom of the basket which tissue in the nexus program

  

  (config) # class-map type qos myTraffic / / traffic ISCSI of Match
  (config-WCPA-qos) # match iscsi Protocol

  #policy - type myQoS-QoS policy map / / qos Set group 2 ISCSI traffic so that it can be recognized
  class myTraffic
  the value of qos-Group 2

  (config-WCPA-may) # class-map type networks myTraffic
  (nq-WCPA-config) # match qos-Group 2

  (nq-WCPA-config) # type network-qos policy-map myNetwork-QoS-policy
  (nq-pmap-config) # class type networks myTraffic
  (config-pmap-nq-c) # break without moving
  (config-pmap-nq-c) # mtu 2158
  (config-pmap-nq-c) # sh type of network-qos policy-map myNetwork-QoS-policy

  (config-pmap-c-qos) # class-map type myTraffic queues
  (config-WCPA-may) # match qos-Group 2

  (config-pmap-nq-c) # policy - map type queues myQueuing-policy
  (config-pmap-may) # class type myTraffic queues
  % of bandwidth (config-pmap-c-only) # 50
  (config-pmap-c-only) # class type class default queues
  % of bandwidth (config-pmap-c-only) # 25
  (config-pmap-c-only) # sh policy-map type myQueuing-policy Queuing

  (config-sys-qos) # type of service-QoS policy entry strategy myQoS
  (config-sys-qos) # type of service-network-qos myNetwork-QoS-policy policy
  -service policy (qos-sys-config) # type myQueuing-policy input queues
  (config-sys-qos) # type of service-policy output myQueuing-policy queuing

  Let me know your concerns

• I can't configure my ipod shuffle... says no drivers are installed for this device.

  I can't put it to the top of my ipod shuffle... it says that the USB device is not recognized... It also says that no drivers are installed for this device.  My son has an ipod touch and I have another MP3 player and both work very well.  Is there something special to set up an ipod shuffle?

  Google for forums of Apple and choose the right pair for your question.

• Error: The Windows Update components must be repaired. One or more components of Windows Update are configured incorrectly

  Original title: Windows Ypdate default data locations have changed. By MS Fix - it = need to change the locations of update of widows to the default settings of Windows. How do I do that?

  All the Windows security updates fail since late May. Used MS Fix Center, issued found = "components Windows Update must be repaired. One or more components of Windows Update are configured incorrectly. "Need to"places of Windows Update change to the default settings of Windows. How can I do?

  1 McAfee Total Protection, 27/02/2013 expiration date. No other anti-spyware or firewall, only MS Windows firewall.

  2. any other Norton or McAfee has never been installed.

  3 McAfee is installed in the PC.

  4. no
  4B. no
  4 c. [all except KB2718704]
  4 d all found.
  4th. KB2393802 12/02/12 and Ko 971029 3/17 / 12.

  5. ask to Google Chrome

  6 Java is U.5 V.7.

  7. do not use Registry cleaners.

  8. never install repair or cleaning set

  Fact: McAfee (and Norton) applications are notorious for not not upgrade (or uninstalling) itself. Evidence for many years of McAfee "leftovers" is the troublemaker more likely here.

  Roll up your sleeves & cross your fingers...

  ACTIONS

  [You will see that there is quite a bit to do this, you may want to print these instructions for reference offline. Perform ALL steps below in a 1 meeting - allow a minimum of 1 hour.  Don't skip the steps!  [Note: If a step said to restart, restart! ]

  1. click right on the following link to download the McAfee Consumer products Removal tool, select SAVE as... & download the utility on your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your key of handy product, uninstall McAfee Total Protection via Start | Control Panel | Programs: Programs and features.

  4 IMPORTANT! -Online make sure that the Windows Firewall is activated immediately after the reboot!  (Should be done automatically, but I want you to check.)

  NB: Now you're "working without a net": do not to ANYTHING else online (e.g., navigation reading E-mail; cat) until you have finished step #7 below!

  5. double-click on the file that you saved in #1 above to run the utility. DO TAP not your keyboard until the race ends, then restart.

  (6 do a clean install of McAfee Total Protection (using your product ID, if need be) & restart). If you purchased the software directly from McAfee, go to https://home.mcafee.com/Secure/Protected/Login.aspx to connect and download your software.

  Note: McAfee Total Security includes a firewall, Windows Firewall should be disabled now (that is, you shouldn't have too much active).

  7. on several occasions the McAfee application manually update until you get a "not more than updated" or similar prompt.

  8A. Start | Settings | Control Panel | Add/Remove programs. Set Program Access and Defaults: select (check) the CUSTOM [<>] configuration option, and then click the arrows pointing to the far-right | Browser: select "Internet Explorer" here (to not "use my current... »).

  Illustration: http://teamtutorials.com/wp-content/uploads/2007/05/set-program-access-defaults-02.jpg

  8B. now check your settings here: IE tools | Internet Options | Programs | Default web browser: If the make default button is NOT dimmed, click/press it. [1]

  9. right click on the following link and SAVE the download to your desktop: http://www.slipstick.com/problems/reg/chromehtml.reg [2]

  9. b double-click the file that you saved in # 9 above & accept invites him to MERGE with the registry data.

  10. open Internet Explorer (only!) to http://support.microsoft.com/kb/923737 [ignore the warnings of DO NOT APPLY and the section will APPLY to] & run the difficulty.

  Note => for best results, check the option Remove personal settings .

  12. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [ignore the title & symptoms].

  12 b. IMPORTANT!-online make disappear/close theTroubleshooting Windows Update tool ""pop up! "   " -then...

  12. ignorant of the "not recommended" or similar warnings, run difficulty he 50202 in DEFAULT modes and AGGRESSIVE. [3]

  13 restart once more.

  [Take a break! Go outside & run your yard to wake you up! [Take a beer, if you want - then...]

  14. assuming that everything is fine, open Internet Explorer (only!) at http://windowsupdate.microsoft.com . Select CUSTOM and scan | See if you manage to install all security updates (for example, KB2698365;) KB2699988) available now; Follow all the instructions.

  -Online if an update of root certificates is listed under the category of updates software optional on the left side of the window of scan results, install it to enjoy greater security of IE8.

  -Online Tip: do NOT install any other updates software optional or any updated material in option .

  15 Reply to this post with a status report and (hopefully) confirm that KB2698365, KB2718523, KB2691442, KB2655992, KB2719985, KB2699988, KB2685939, KB2707511 & KB2718704 are all listed in Add/Remove Programs now.

  Good luck!

  ==================================================
  [1] after that we ended up this thread, do not hesitate to reaffirm Chrome as a default, if you wish.

  [2] trust Source: http://www.slipstick.com/problems/this-operation-has-been-cancelled-due-to-restrictions/

  [3] full Disclosure: running the utility of automated troubleshooting will remove your history of update but not the list of installed updates.

• Thunderbird 38.2 n Lightning: after restarting TB same calendar are trusquinées - read-only - unlocked n those work synchronize well n change my changes

  TB 38.2.0 Ln 4.0.2
  (1) after you restart TB same calendars are trusquinées - read-only - unlocked.
  (2) calendars, which are always announced don't synchronize well n change my changes (e.g.: if I change a n movement event title there from today to 2 days when I opened TB events is placed again in n today I lose the title changes!).
  Are other users havin same problem? Looks like this.
  Waiting for an answer, cordially.

  Update to Version 38.3.0 solved your problem?

• Re: Brooded and configuration for Touchpad

  Win7 x 64
  L505 - 10 M

  It dishes all kinds of problems after an update of security windows for this system a few months ago.

  I put a backup of C:\ return, but various functions did not work.
  I have most of them are still working today. I installed Flashcard again but configuration for touch pad and display are still missing.
  Mouse drivers are HID-mouse PS/2 version: 6.1.7600.16385 Microsoft.
  I downloaded path touch driver - 20091202155841.zip, but it cannot be installed.
  C: \Program Line\TOSHIBA\Bulletin Council is present but likely damaged and not present in Windows Start-menu\Toshiba.
  How can I fix this?

  arnold12

  It is pretty damn good on your laptop.
  Is installation of recovery for you solution?

  I mean, after the new installation of the OS, everything will be OK again.

  All you need to do is to backup all your data and start the installation of the HARD disk.