I get the error box 'point firefox.exe - entry not found' he said -? Alloc@nsmemory@@sapaxi@z could not be located in the dynamic link library xpcom.dll.

Similar Questions

• Get FL.exe - Entry Point not found 'point of entry procedure for NtAlpcSendWaitReceivePort not found in the dynamic link library ntdll.dll' error at boot fruity loops.

  Original title: ntdll.dll error at boot fruity loops.

  get FL.exe - Entry Point not found 'point of entry procedure for NtAlpcSendWaitReceivePort not found in the dynamic link library ntdll.dll' error when I try to start fruity loops after installing Kies from samsung for the new phone. How can I fix this error? Help, please. Thanks in advance! :)

  Hello
  I suggest you contact support FL. I couldn't find all of the resources for this program.
  Eddie B.

• get this message at the startup of Firefox 5.0: entry procedure CERT_FindSubjectKeyIDExtension point could not be located in the dynamic link library nss3.dll

  get this message at the startup of Firefox 5.0: entry procedure CERT_FindSubjectKeyIDExtension point could not be located in the dynamic link library nss3.dll

  Hello

  You can try to install the latest version on the current: https://www.mozilla.org/en-US/firefox/new/

• How to fix the error, "the procedure entry point PK11_PubDerive could not be found in the dynamic link library nss3.dll

  I use windows 7 and Firefox 39.0. Recently, when I open Firefox it gives this error, 'the entrance of procedure point PK11_PubDerive could not be located in the dynamic link library nss3.dll'. I click on the OK button, and then Firefox load without any other side effects. But this becomes quite annoying and I would not get an error message to me. I tried to uninstall Firefox (all the same when I search for it, nothing comes up) and re-install. But the message is still there. I'm lost for what to do to get rid of him. Any help would be great!

  Thank you!

  BlindingFog said

  I use windows 7 and Firefox 39.0. Recently, when I open Firefox it gives this error, 'the entrance of procedure point PK11_PubDerive could not be located in the dynamic link library nss3.dll'. I click on the OK button, and then Firefox load without any other side effects. But this becomes quite annoying and I would not get an error message to me. I tried to uninstall Firefox (all the same when I search for it, nothing comes up) and re-install. But the message is still there. I'm lost for what to do to get rid of him. Any help would be great!

  Thank you!

  I thought about it. I had Cyrstal Reports XI on my machine and when I uninstalled it the error disappeared.

• After you install a Foxfire 5.0 update, I get this message when you try to open Mozilla: the procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll.

  I get this message when you try to open Mozilla: the procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll.

  Do a clean reinstall.

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
  • Uninstall your current version of Firefox.
  • Do not remove the data of a personal nature when you uninstall the current version.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data is stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

• Error 'the procedure entry point xmlTextReaderConstName' not found in the dynamic link library libxml2.dll when you connect to the computer

  Original title:

  I get this pop-up when I connect: 'the procedure entry point not found xmlTextReaderConstName in the dynamic link library libxml2.dll.'  What should I do to fix this?

  Hello

  1. are you able to connect next to this error?

  2. are you aware of any changes made to the computer, before the show?

  Method 1:

  Step 1: Safe Mode

  Start your computer in safe mode and check the number.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Clean boot

  If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you have finished the clean boot procedure, follow step 7 in the article to restore your computer to normal startup.

  Method 2:

  Run a SFC system analysis and control for the issue.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:

  Follow these steps.

  a. open windows Explorer, navigate to the following location:

  For 64-bit.

  C:\Program Files (x 86) \Common Files\Apple\Apple Application Support

  For 32 bit,

  C:\Program Files \Common Files\Apple\Apple Application Support

  b. copy the file "libxml2.dll.

  c. open new windows Explorer, navigate to the following location:

  For 64-bit.

  C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support

  For 32 bit,

  C:\Program Files \Common Files\Apple\Mobile Device Support

  d. Paste the file 'libxml2.dll' at the location.

  e. restart your computer.

  I hope this helps.

• Error 'the procedure entry point not found RtlCopyContext in the dynamic link library ntdll.dll' while clicking on

  Original title: I got this error by clicking

  Hello, I got this error by clicking on any .exe file (Anti Virus, players, etc.). "The procedure entry point rtlcopycontext could not be located in the dynamic link library ntdll.dll" Please help me because I can't start any program...

  Here is the screenshot of this error!

  http://Windows.Microsoft.com/en-us/Windows7/change-default-programs-using-set-program-access-and-computer-defaults

  Thank you very much. Problem has been resolved

• Start Windows 7 error"the procedure entry point not found objc_exception_try_enter in the dynamic link library objc.dll"

  The procedure entry point objc_exception_try_enter could not be located in the dynamic link library objc.dll

  How can I avoid that this message that appears on my desktop when I connect to my desktop computer?

  I deleted iCloud and other programs, but it still appears.

  You can try the clean boot procedure to try to ascertain what autorun program is triggering this msg

  http://support.Microsoft.com/kb/929135

• The procedure entry point LdrSystemDllInitBlock could not be located in the dynamic link library ntdll.dll

  I was not able to use a particular computer since Wednesday morning, August 14, 2013.  The error dialog box. "The procedure entry point not found LdrSystemDllInitBlock in the dynamic link library ntdll.dll" on almost every application I try to open that includes IE, FireFox and Chrome browsers.  System/Windows Control Panel applications seem to work but nothing else.  I tried to do a restore of the system on several points before August 14, nothing helps.  That is that I keep getting this error on every application dialog box.  Is there one resolution other than backup can I reinstall Windows?

  Hi David,

  1. you remember changes to the computer before the show?

  2 the computer sits in a field?

  This problem may occur if the ntdll.dll file is damaged.

  Here are some ways you can follow to resolve the problem:

  Method 1:

  I suggest that you run SFC scan to check for missing or damaged system files. To do this, follow the steps mentioned in the link:
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 2:

  I suggest you to re-register the dll (Dynamic Link Library) file from an elevated command prompt.

  a. click Start.

  b. type Cmd.exe.

  c. right-click on cmd.exe and select run as administrator.

  d. type regsvr32 ntdll.dll and press enter.

  Method 3:

  Step 1:

  You can try to start in safe mode and check if the problem persists. Only basic files and drivers needed to run Windows are started. If a problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic as possible cause device drivers. To start in safe mode follow the link.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:

  If the problem does not occur in safe mode then boot to the desktop in normal mode and check that the third-party program is causing the problem. To configure your computer to clean boot follow the link below.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135

  Note: See "How to reset the computer to start as usual after a clean boot troubleshooting"

  under more information to prepare the computer to start as usual after a repair.

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• SKYPE: "the procedure entry point not found NtalpcSendWaitReceivePort in the dynamic link library ntdll.dll."

  I just updated my version of Skype at: 5.10.0.14, but every time he tries to load at startup, I get this error message: "the procedure entry point"NtalpcSendWaitReceivePort not found in the dynamic link library ntdll.dll.

  When I click ok, it loads. I have re-uploaded twice, but it's always the same!

  Please, can anyone help?

  Hello

  Method 1:
  You can uninstall Skype by using the Fixit, then reinstall.

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  Method 2:
  Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Alternatively, you can display the query in the Skype forum to get help.
  Skype - Forums
  http://Forum.Skype.com/

• McUICnt.exe - ordinal not found that 459 ordinal could not be located in the dynamic link library urlmon.dll.

  McUICnt.exe - ordinal not found that 459 ordinal could not be located in the dynamic link library urlmon.dll.
  Please tell us how to solve this error message. It does not seem to affect processes, just an annoying message that will not disappear. Help, please

  [Moved from comments]

  Hey Carol,.

  It would help if you could answer these questions.

  -What version of Windows is installed on the computer?
  -What antivirus software do you have on the computer?
  -When you get this error? It is when the computer starts for the first time?

  Here are a few troubleshooting steps that you can try to get the matter sorted.

  First of all, if you have Mcafee AntiVirus installed on the computer, turn it off for awhile and see if the error. McUICnt.exe is a file that is

  used by Mcafee and could be the reason for the error.
  Note: Antivirus should be reactivated when you have completed troubleshooting. Computer with antivirus off is: exposed to the virus.

  If Mcafee is not the cause, then try to do a scan complete antivirus on the computer in safe mode with networking using the Microsoft Safety Scanner

  Make sure that the computer is virus-free.

  Safe mode with networking: http://windows.microsoft.com/en-in/windows7/start-your-computer-in-safe-mode

  Note: the steps mentioned in the link applies to Windows vista and Windows 7.

  Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Let us know the results.

• procedure entry point _except_handler4_common could not be located in the dynamic link library msvcrt.dll

  I installed assassin creed III, but when I want to play it game this error:

  procedure entry point _except_handler4_common could not be found in the dynamic link library msvcrt.dll.
  I don't know how can I solve the problem.please help me

  Hi mosi0098,

  Welcome to Microsoft Community where you can find all the answers related to Windows. You get the error message when you try to install the game, try the steps in this article and check:

  Error message: Procedure Entry Point not found in Msvcrt.dll file

  http://support.Microsoft.com/kb/324762

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

• Error starting NicPrefAdapterType@ACEnumNics@@QAEAAVCBytearray@@X2 be found in the dynamic link library athcfg2ou.dll. "

  Original title: meaning of the Error Message?

  I get the following message every time I open my Windows XP that mean? and how to fix it?  "The procedure entry point? "NicPrefAdapterType@ACEnumNics@@QAEAAVCBytearray@@X2 be found in the dynamic link library athcfg2ou.dll."

  Hi Peach14,

  ·         Have you made changes on the computer before this problem?

  Start the computer in safe mode and check if the problem persists.

  http://support.Microsoft.com/kb/315222

  If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.

• The procedure entry point strnlen could not be located in the dynamic link library msvcrt.dll

  Using Firefox 50.0 XP, SP3 - update from the previous version.

  This is the popup-

  http://i.imgur.com/3Jo5sqB.jpg

  Firefox.exe - Entry Point not found

  "The procedure entry point found strnlen in the dynamic link library msvcrt.dll."

  This occurs after I upgraded to 50.0 FF - I tried to reset and clean browser cache. Happens again 1 - 3 times per day. I am able to click through it, but why?

  Bug?

  Any help appreciated.

  TIA :)

  Here's what I did:

  Completely uninstalled FF 50 of my system. Following the official procedure of Mozilla.

  https://support.Mozilla.org/en-us/KB/uninstall-Firefox-from-your-computer#w_uninstall-Firefox_3

  Exported bookmarks and bookmarks toolbar.

  Then ran SFC - clean result. Used CCleaner for registry and cache - totally cleaned.

  The system is completely clean. Reinstalled FF 50. The imported bookmarks and bookmarks toolbar.

  One by one from reinstalled add-on.

  From this post, everything is fine - need a week. I will post at the time. If earlier said problem arises.

  Thank you! :)

• Error message "the 421 ordinal not found in the dynamic link library urlmon.dll" whenever I start my computer

  Original title: 421 ordinal could not be located in the dynamic link library urlmon.dll

  I get this error every time I start my computer: "the 421 ordinal not found in the dynamic link library urlmon.dll.

  In the control panel select Problem Reports and Solutions (problem of type in)
  The START searchbox), go to the history of the problem, your mistake right click and choose
  Check the Solution.
   
  In administrative tools, choose the reliability and performance monitor and
  Click on MonitoringTools then the reliability monitor (type of reliability in research
  at startup). This list is a chart of the software installs, uninstalls, Windows
  updates and crashes by date. See if your plant started to occur after
  you installed or uninstalled something.
   
  You can clean boot
  Troubleshooting http://support.microsoft.com/kb/331796
   
  Download http://www.nirsoft.net/utils/shexview.html
  Disable all non-microsoft shell extensions (to explore) and reactivate a
  by so this can help.
  --
  ..
  --
  "Mr_Xtatic" wrote in message news: 63562fcd-7837-420-b-84e0-854170dfae5c...
  > I get this message error everytime I start my computer: "the ordinal 421.
  "> could not be located in the dynamic link library urlmon.dll"