I get this error "error while unpacking program, Code 2. Contact the author' when playing downloaded games

Similar Questions

• "Error while unpacking program, code 2" Please report to the author"Dragon 11 naturally speaking

  What does the error code "error while unpacking program, code 2" Please report to the author"means.  I started getting this error message yesterday, and there is some software that I can't receive now.

  Thank you!

  OK, here goes... my understanding is that you remove the update of microsoft KB2533623

  To remove this update of Windows KB2533623, follow the steps below:

  1. Click on "start > Control Panel > programs and features.
  2. Click on the link "View installed updates" on the left side of the window.
  3. Locate the update ' update for Windows Vista for x 64-based systems (KB2533623).
  4. Select the KB2533623 update and then click on the "Uninstall" button
  5. Once the update has been removed, restart the computer.

  It worked for me, BUT the charge is upgraded every time I restart so do not forget to turn off the automatic updates OR delete KB2533623 every time.

• popup message each startup (boot) - error while unpacking program, code 2.

  I have two messages popup one after the other, after each startup (boot)... it appeared after by mistake, you tap install updates day & shutdown, at first men... Please bear in mine, I have not upgraded to SP2 now have SP1... I think the required updates SP2... sometimes to invite me to install SP2, but refused.

  VISTA Ultimate 64-BIT

  1 MESSAGE POPUP
  "Error while unpacking program, code 2" Please report to author. »

  2ND MESSAGE POPUP AFTER CLOSE FIRST POPUP
  "An error occurred when loading library commonforms.dll::RegisterWindow

  It may have been removed. Please reinstall the Application. If the problem persists contact technical support. »

  Hello

  Have you made changes on the computer before this problem?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Put the computer in a clean boot state, then check if that helps you.

  How to solve the problem by running the clean boot in Windows Vista:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Method 2:

  Run the Microsoft Safety Scanner and check if there are any threats found.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Note: If no threat found check if the file is necessary or not, then delete it.

  Also make sure that the popup is secure and then install if necessary. Windows updates are all secure and this is only the computer and Windows manufacturer. Optional updates are the manufacturer of the computer and the manufacturer of the application that you have installed. Important updates are Microsoft and it must be installed. I also suggest you try to install Service pack 2 on your computer and check if that helps.

  Learn how to install Windows Vista Service Pack 2 (SP2):

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  Hope the information is useful.

• I have Windows 7 and still get this message: error while unpacking program code 2. Will you please report to author and I can't findKB2533623

  Can someone help me please I have Windows 7 and get th same message and I can't fint that update in my system

  Hello

  • When you receive this error message?
  • What exactly are you trying to install?
  • Did you install KB 2533623 on your computer?

  If you have installed this update on your computer, I suggest that you try to uninstall it and check:

  1. Click on "start > Control Panel > programs and features.
  2. Click on the link "View installed updates" on the left side of the window.
  3. Locate the update ' update for Windows Vista for x 64-based systems (KB2533623).
  4. Select the KB2533623 update and then click on the "Uninstall" button
  5. Once the update has been removed, restart the computer.

• Error while unpacking program, code 2. Please report to the author

  I have Windows Vista... this message began yesterday after I updated Windows and appears constantly especially when I'm in my area by e-mail...

  Help, please!

  Hello

  ·          Are you using Internet Explorer to check your emails?

  If the problem occurs in Internet Explorer, and then start Internet Explorer-add on mode to check if the problem persists.

  Try Method 3 in the following link: http://support.microsoft.com/kb/936213/ro

• I get this error while turning on the firewall manually ": {26EE0668-A00A-44D7-9371-BEB064C98683}\3\::{4026492F-2F69-46B8-B9BF-5654FCO7E423}" "."

  I get this error while turning on the firewall manually

  Here are a few steps to try troubleshooting:
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  http://Windows.Microsoft.com/en-us/Windows7/cant-connect-to-a-network

  If those who do not work, let us know exactly what is happening and when.
  B Eddie

• I was installing 2 important updates, but I always get this error 646 (KB976321, KB981726) code, pls.help

  I was installing 2 important updates, but I always get this error 646 (KB976321, KB981726) code, pls.help

  You can search every download and manually install the same.

  IE: http://www.microsoft.com/downloads/en/results.aspx?freetext=KB976321&displaylang=en&stype=s_basic

  Save the update to a location on your hard drive, you can find and then install the update from there.

  TaurArian [MVP] 2005-2010 - Update Services

• Error while unpacking program, Code2, please communicate with the author - error message occurs whenever I open my computer

  Whenever I open my computer, I received a message that says 'Error when unpacking program, Code 2, please contact the author'.  It slows me down using my computer and I really have no idea what it is.  I did research in the internet which causes some possible for this error message and I think it's regarding my Windows Update I must have clicked on last week.  Help, please! I really want this message to go.

  Thank you.

  Hi KrystleRivera,

  ·         Did you the latest changes on the computer before this problem?

  ·         When the question began?

  ·         What version of the operating system is installed on the computer?

  I suggest you follow these methods.

  Method 1:  Start the computer in safe mode with network and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startupmode.

  Method 2: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Reference: http://windows.microsoft.com/en-us/windows7/Optimize-Windows-7-for-better-performance

• I get this error message whenever I try to run the disc defragmentatio

  I get this error message whenever I try to run disk defrag c:\documentsandsettings\user\localsettings\applicationdata\microsoft\internetexplorer\recovery\active\recoverystore

  I really need to run defrag, but one can not because of that, I have looked everywhere but can't find and answer, please help it would be much appreciated

  I guess that a malware is the cause of the problem.

  Download this http://www.malwarebytes.org/

  Update and Scan. If this does not it, use this

  http://www.myantispyware.com/2009/10/28/how-to-remove-desktop-Defender-2010-uninstall-instructions/

• When you try to upgrade Windows Vista to Windows 7 I get this error: "Windows could not retrieve information about the disks on this computer."

  original title: problems of Windows update/upgrade

  I'm currently trying to install Windows 7 on my desktop running Vista.

  Whenever I run the Setup it comes up with the following error: Windows could not retrieve information about the disks on this computer.
  I already put the virtual disk on auto and rebooted several times. I get the same error.
  Also, I tried to update my computer by using the windows update thinking that would help... Windows update decides to not work either! It comes up with the error: Windows Update cannot currently check the updates, because the service is not running. You may have to restart your computer.
  gain, I restarted and it still does not work.
  I am currently running Windows Vista 32 bit on my desk (I thank God for my laptop!).

  Help!

  First, run Windows 7 upgrade advisor:

  Windows 7 Upgrade Advisor
  http://Windows.Microsoft.com/UpgradeAdvisor

  Note the results and make sure to follow the steps.

  Try to install Windows 7 using the USB

  Install Windows 7 with a USB memory key
  http://www.winsupersite.com/article/Windows-7/install-Windows-7-with-a-USB-memory-key

• When I open windows defender, I get this error that says 'application failed to initialize the 0 x 80070006 handle is valid' can you help me?

  Yes just like the title says I have a few errors on my laptop.

  1 WINDOWS DEFENDER ERROR indicating that the initialization failed 0 x 80070006 handle is valid.
  2. THE REPAIR ERROR 42060
  WINDOWS 32:MALWARE - GEN 3
  4 WINDOWS DNS CHANGER VJ [Trj]

  Hello

  Method 1:
  Some malware may also be responsible for this behavior, you need to be as sure as possible that your machine is not infected
  You can perform a Microsoft Security Scanner and check if the virus is completely removed. Check out the link below to run the scan and check if this helps-
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  
  Method 2:
  You can also check out the link and check:
  Error message when you try to start Windows Defender on a computer that have recently upgraded you to Windows Vista: "initialization failed".
  http://support.Microsoft.com/default.aspx?kbid=935511

• I get this error during the windows WindowsUpdate_8024A000 updates

  I get this error while the vista sp2 update is there any solution for this? WindowsUpdate_8024A000

  Hello
  The Windows Update 8024 A 000 error Code means THE NOSERVICE WU E. This translates as UA was impossible for incoming calls to THE service.

  I would like for you to perform general troubleshooting steps for Windows Update.
  Method 1: Try to run the fix - it of the article mentioned below, if you not him have not yet tried.
  The problem with Microsoft Windows Update is not working:
  http://support.Microsoft.com/mats/windows_update/
  Method 2: Scan run SFC. Analysis (sfc) System File Checker will Windows replace corrupted or missing system files on your computer.
  Scan sfc enforcement procedure:
  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  b. click on continue or provide administrator credentials if prompted.
  c. in the type in the following command prompt window and press ENTER:
  sfc/scannow
  Refer to this article for more information:
  http://support.Microsoft.com/kb/929833
  Method 3: Check the hard disk for errors:
  See: http://windows.microsoft.com/en-US/windows-vista/Check-your-hard-disk-for-errors
  Note: Check hard drive for errors will check the bad sectors on the hard drive and repairs. During this process, there is a chance of losing the data in these sectors. Please back up the data before performing this step.
  I hope this helps.

• After the connection to my computer today and to go to YouTube, I get this error message on my screen: "Microsoft Visual C++ Runtime Library error - failure of the Assertion.

  After the connection to my computer today and to go to Youtube, I get this error message on my screen.

  The assertion failed!

  Program:...
  File: common\npn_gate.ccp
  Online: 267

  Expression: pPluginShim

  I try to press abandonment and try again but nothing happen.

  Hi Shadwik,

  Thanks for the reply.
  I did as you said. It has been effective. But only to play the first video clip on youtube. With the next video, the error appeared again. I looked at the programs and saw the customer to be automatically updated to 11.3 flash...
  After that I tried to read a music video by realplajer and who has a problem too. by seeking out them in true originator, I founded there a conflict with the 1.3 flash payer... and disabling the Web download & recording of Realplayer was the solution finally.
  After that my PC works fine.

• Help! -What creation customer I get this ERROR "To provide a positive whole number for the amount of the minimum balance customer or per cent balance amount overdue type is amount or percentage respectively."

  What creation customer I get this ERROR "To provide a positive integer for the customer minimum balance amount or percent when the balance amount overdue type is amount or percentage respectively."

  I tried troubleshooting when I saw the other post and created a new class of customer profile, but still get an error, even if I created another profile as below and existing it attached to another customer that has worked, but when I tried to create a new customer it still gives me the error. I use Oracle Applications R12.1.1

  
  Steps I followed to create a new customer profile

  = Make sure that the new class of customer profile that allows you to create is in the active state. Cross check the steps below when you define a class Profile of the client... e.g. name: by DEFAULT (and active)

  (* 1) profile of class tab :*

  ) a FWD billing balance: not enabled

  (b) billing-> tax print (summary by name of tax), consolidation of rule (DEFAULT)

  (c) define the conditions according to your requirement, allow the delivery & terms of substitution

  (d) Dunning set according to your requirement,

  (e) filled in info collectors according to your requirement of credit check enabled...

  (f) reception-> auto cash rule defined as 'Standard '...

  *2) Load profile * ended it according to requirement

  *3) Amounts class profile* for example say currency defined as 'USD '.

  (a) credit limit: 100000

  (b) limits of credit order: 100000

  (c) minimum amount: 1.00

  (d) statement amount min: 1.00

  (e) do not put any value in the type of exchange rate (for example, monthly, Plan etc...)

  (f) minimum customer balance: Amount-> value: 5.00

  (g) minimum balance Bill: Amount-> value: 5.00

  (h) right to minimum per invoice: 1, the maximum charge per invoice: 100 under the interest Charge

  (i) Reference Type as a set rate, value: 10

  (j) you can avoid using the penalties for now...

  Step - 2_ one) open a customer... * go to Bill the site details *-> click on the profile tab-> under class profile field please include new profile class that is created by you (for example, by DEFAULT). (b) go in the sizes tab profile-> Click (Show) on currencies USD-> check the establishment here as well, I could see it.

  When I tried to create a new customer using the new profile, it's repeating the same mistake. Help, please.

  Thank you for your reply Emmanuel.

  Sorry could not inform earlier, I tried at first with my amount of class XX profile newly created for all currencies. But he has not solved.

  When I changed the default profile for all the currencies class. It is resolved.

• I can't download and install updates to Windows or games on the internet. I get an error saying that I am not on the internet.

  I can't download and install windows update or games on the internet, I get an error saying that I am not on the internet, when I help

  Trinity

  Hello

  1. what operating system do you use?

  2 did you change on your computer?

  3. what version of Internet Explore do you use?

  Method 1:

  If you are using windows 7, I suggest you check in SafeMode with network.

  Advanced, including safe mode startup options

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Method 2:

  I suggest you of due to windows update, please see the link.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  Method 3:

  I also suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  See also:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet