I got the error message error video compilation that follows? What should I do
I got the error message error video compilation that follows? What should I do
Export with the SOUL. Open Preview and watch the encoding until it fails.
This is the place on the timeline, you need to fix.
Tags: Premiere
Similar Questions
-
New components is a new computer.
Inserted the XP Pro CD in the drive but get the error "file not found \i386\ntkrnlmp.exe. The error code is 7. »
Rebooted comp 5 times with the same problem after BIOS.Hi Milkshake83,
Thanks for posting. Proceed as follows for this error.
Method 1: Restore the default settings of the BIOS WARNING: this procedure may involve changing the semiconductor (CMOS) settings of the computer's complementary metal oxide and by changing the BIOS of the computer. Incorrect changes to the BIOS of your computer can result in serious problems. Change the CMOS settings of the computer at your own risk.
To resolve this issue, restore the BIOS of the computer to its default settings. For more information about the correct settings of the BIOS of the computer and how to check and change these settings, see the computer documentation or contact the manufacturer of the computer.
In addition, to confirm that the computer's BIOS is current, contact the computer manufacturer to inquire about the last update of the BIOS available for the computer.
Method 2: Remove the faulty RAM to resolve this issue, remove the memory modules installed in the computer.
NOTE: you must leave enough RAM for the computer to start and run Windows.
For more information on the amount of RAM that is required to run Windows, click on the number below to view the article in the Microsoft Knowledge Base:
304297 configuration (http://support.microsoft.com/kb/304297/) System requirements for Microsoft Windows 2000 operating systemsIf the error message described in the "Symptoms" section of this article appears again after removing the memory module, remove a different memory module. This procedure may ask you to restart your computer several times to identify the specific memory module that is not working properly.
For more information about how to add and remove RAM to the computer, contact the manufacturer of your computer or see the documentation that came with your computer.
http://support.Microsoft.com/kb/318729
I hope this helps!
Shawn - Support Engineer - MCP, MCDST
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
So my friend gave me his computer dell laptop. The thing would boot normally for a few days until he would give me a blue screen of death with the "UNMOUNTABLE_BOOT_VOLUME" message constantly to not even upward. I ran the diagnostics and got the error code 2000-0146. What I've read, this code error means that the HARD drive is bad and must be replaced. So, to make sure that it's the hard drive, tried to boot from an old hard drive, I got around the installation by USB and windows gave me the same stop error message. May - so that means it's a motherboard problem?
No, it isn't - unless the operating system was installed on this drive AND the system in question, that it won't work as a bootable drive.
Unplug the system, remove or disconnect the battery and hold the power for 30 seconds approximately. Turn on and re-run the diagnostic tests - if the same error appears again, the drive is bad. Replace it.
-
I got the error message "Spooler subsystem app stopped working and was closed".
I got the error message "Spooler subsystem app stopped working and was closed" when I tried to print a large PDF file. I can not load a printer now. What is the next step?
Hello
You should probably check with Support from Adobe and their communities and Forums in case
There are known problems.Adobe - Support
http://www.Adobe.com/support/Adobe - communities
http://www.Adobe.com/communities/Adobe - Forums
http://forums.Adobe.com/index.jspa====================================
Check with the printer manufacturer for updated drivers and support for known issues.
Check chan seen message here - one of the highest.
fixed spooler subsystem app stopped working
http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e===================================
If the above didn't help:
Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
the latest driver).Check Mr. Fixits here and if you use the other methods go back and try again later.
Problems of print and error - a Mr Fixit of printing
http://support.Microsoft.com/GP/printing_problemsSolve printer problems - a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx------------------------------------------------------
Logon as administratorStart - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN
You can copy and paste each line except those brackets and press ENTER after each.
net stop Spooler
(echo suppression of all print jobs)<-- you="" should="" see="" this="">-->
ping localhost n 4 > zero
del/q %SystemRoot%\system32\spool\printers\*.*
net start Spooler
(sound Done!)<-- you="" should="" see="" this="">-->
ping localhost n 4 > zero
Another way
http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspxIf you use Control Panel - Classic - printers
Try after unplugging your printer if necessary.
-------------------------------------------------------------Also check the spooler print and its dependencies and addictions Service.
The value of all Services back to their default values.
Start - type into the search box-> Services find top - make a right click on - RUN
AS AN ADMINISTRATORBlackViper - for Vista SP1 - Services - all return to their default values.
http://www.blackviper.com/2008/01/28/black-vipers-Windows-Vista-Service-Pack-1-service-configurations/#more-3020BlackViper - for Vista SP2 - Services - all return to their default values.
http://www.blackviper.com/2009/05/31/black-vipers-Windows-Vista-Service-Pack-2-service-configurations/#more-2991How difficulty Windows Vista print spooler starts do not
http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html------------------------------------------------------------
Check this thread if necessary - to stop and erase the spooler
------------------------------------------------------
Clean the General corruption and repair or replace the damaged/missing files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228CheckDisk (chkdsk) runs at startup.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
So I recently got these computer errors on my laptop. The pixels on the screen start to panic and it still restarts my computer.
The first time, he started was when I was playing a game called League of Legends and it worked perfectly fine on my laptop, and he had always run around 70 fps. I played this game for a long time. Then, in the middle of an online game the screen flipped out and restarted my PC! He sent me a message saying: "your PC has encountered a problem :(. "
After it restarts my laptop and then after restarting the pixels on the screen start to panic again and it restarted. After that restart again once he sent me a message saying he will "fix the problem on my PC. I clicked on 'Repair' and then it restarted again. After the restart he freaked out again and then it restarted and it gave me a message saying "your PC will convert at an early stage when it doesn't have this problem. This can remove files that have been installed recently. So, I allowed it do and after 3 hours of waiting he brought me to an earlier stage if my laptop was not the problem. He only come back in a few hours. Then the next day, I decided to try again in League of Legends, it was working fine and it launched the game. I was running on my normal fps then he started trolling and it fell to 12 frames per second and the screen flipped out again and then my computer restarted. Once restarted, it it worked fine after 5 minutes it restarted again, and then he gave me a message saying: "Windows could not load correctly" then he said I got the error: "0xa0000001. I turned on my PC and my screen has panic when he started, and then it restarted again give the same message and tell you have the error: 'DRIVER_OVERRAN_STACK_BUFFER '. It came on again and it was worse still panic then it restarted and it gave me the same message saying that you have the error: "BAD_POOL_HEADER". It restarts and several times with lit the screen always freak out so I decided to just remove the plug and ask for help. I went on the computer of my brother and sought a solution for these errors. Turns out Im not the only one to these errors. They say that '0xa0000001' error is caused primarily by an AMD graphics card and my graphics card is an AMD graphics card. The solution for this error is to uninstall the graphics card and reinstall it directly from the manufacturer's website. I could have made this solution and corrected my graphics card, but there is a problem. Whenever I turn on my laptop the pixels panic and sometimes the screen turns black and then it restarts. I can't access anything whatsoever, and he keeps just restarting. Please help me and tell me how to fix my phone :( I really need a solution to this problem.
Please answer quickly :(
Thank you
There is an old saying that if it ain't broke, don't fix it.
It works again.
Read this information
You need to get the Driver of your laptop computer software or a hardware manufacturer, not through Windows Update (with the exception of Microsoft put updated material), as Microsoft normally does nor those have the most recent drivers available as Microsoft leverages the hardware manufacturer 3rd party to provide them.
Go to the website for your laptop or manufacturing equipment > Driver and Software Support Section > search your laptop or material style number > then your operating system > locate the correct drivers > download and install.
______________________________________________________
But this is no guarantee that this won't happen again.
Also, it would be that the game hardware requirements are higher than supports the hardware in your laptop.
It could also be due to lack of graphic material.
All you can do is search for the latest drivers and play games that require only a material that has your Lapyop.
See you soon.
-
Hello! I had taken off my old PC Adobe Acrobat 9. When I tried to install the software on my new PC. I got the error message of invalid key.
Pls help. TKS.
Hadrian, please try to follow the below mentioned steps.
- Error "invalid serial number". Acrobat 9 | CS4
- Error "serial number is not valid for this product". Creative Suite
I hope this helps.
Atul_Saini
-
I have Production Premium with Encore CS6. I created my first HD project, tested and received no error but when I went to 'Building' my project still on a BluRay disc, I got the error message "ERROR CORE 03". What should I do to get this project on a BluRay disc?
In response to both Richard & Stan. I received the error message ""device error", Code '3' notes Create Sequence of STC: cannot write file M25.» Or something very similar to this, but I think it was exactly that. It was my first HD project but used several times to make projects sustainable development without problems that were not of my own creation. So it was a shock and cost me money and the failure to meet a deadline. What I did: on-screen 'Build '.
Format: Blu - ray,
Output: Blu - ray Image,
Source: Currrent project,
Destination: I Browse... d a location appropriate. He managed a Blu - ray image.
Using reminder once again, step 2 - on-screen 'Build '.
Format: Blu - ray,
Released: Blu - ray Disc,
Source: Disk Image,
Destination: my disc drive that holds a blank Blu - ray disc. He managed a Blu - ray disc.
Then I found a job step 2 autour for the problem. My question is this: I pay $70.00 / month ca to the people Adobe cloud to keep their software up to date and work as advertised. I do not think I should spend a few hours and lose money looking for a problem created Adobe not yet keeping cs6, updated and works as promised. I submit my first bug report. My suspicion is that adobe considers that Blu - ray is out of style, and they do not care to correct this bug in still cs6.
I'd love to know the thoughts of others on this.
-
I just got the error meassage when you try to open both my I and PS I paid monthly payments for the composition and I have these two installed software. What can I do to work on it and why they give me this error message?
Log, activation, or connection errors. CS5.5 and later versions
Anything else, to be more precise. you have not provided information system nor told us, what really is the error message.
Mylenium
-
error code 0x80070005
Upgrade Windows xp to Windows 7 Professional. During installation I got the error code 0 x 80070005. Solution?
How to troubleshoot the error codes Activation Volume Windows 7, Windows Server 2008 and on Windows Vista computers
http://support.Microsoft.com/kb/938450Error code 0x80070005
Symptom
When you try to use a KMS host, a KMS client, or a MAK to activate one or more computers, you may receive the following error message:0x80070005
Access denied that the requested action requires elevated privileges.Cause
This problem occurs if the user (UAC) access control does not allow activation of process run in a not high command prompt.
Workaround
To work around this problem, follow these steps:1. Click Start, click principally made programs, accessories, right-click Guest, and then click Run as.
2. click on the next user and then select Administrator in the user name list.
3. click on OK.
4. at a command prompt, type the following command and press the "Enter" key: slmgr.vbsJ W Stuart: http://www.pagestart.com
-
When I tried to run the sample App "Weather" on ripple Packager for OS 7.0 Bb I got the error
When I tried to run the sample App "Weather" on ripple Packager for OS 7.0 Bb I got the error
Oh, Snap! Build request failed with the message: [ERROR] feature is not found in any extension (blackberry.ui.Spinner)
What should be done to avoid the mistake and build/package for the web app and run it on the device?
You need install the SpinnerControl extension.
See "Dependencies" sample weather README on Github:
https://github.com/BlackBerry/WebWorks-samples/tree/master/weather
-
I got the error code 0 x 8040154 while trying to synchronize my phone mobile gallaxy S3
I got the error code 0 x 8040154 while trying to synchronize my phone mobile gallaxy S3 to outlook using Samsung Kies SW. What can I do?
Go to Samsung support.
-
I got the error code "WindowsUpdate_00000643" "WindowsUpdate_dt000"
I got the error code "WindowsUpdate_00000643" "WindowsUpdate_dt000" when I try to install update ' update dla programu Microsoft .NET Framework 4 w systemach Windows XP, Server 2003, Windows Vista, Windows 7, Server 2008 i Server 2008 R2 dla systemow opartych na procesorach x 64 (KB2468871). I tried 'http://support.microsoft.com/kb/958052 ' but it is does not work. How to upgrade?
Try the following to see if it solves the problem:
UTC/GMT is 23:30 on Wednesday, November 16, 2011
-
I am running windows vista without service pack, 32-bit. I can't install the update. I got the error code WindowsUpdate_8007371C. I want to finally install sp1 but I got the same error.
See this response archived from a previous thread:
05/05 / 1101:03: 23 am
-
On MSN, I got the error Code: 8e5e0158, how should I do?
On MSN, I got the error Code: 8e5e0158, how should I do?
On MSN what: Messenger?
http://www.windowslivehelp.com/forums.aspx?ProductID=2
They will help you with your WLM questions when repost you your questions in the Forums above Windows Live Messenger.
See you soon.
Mick Murphy - Microsoft partner
-
Upgrade of windows code 7-10 and got the error 0 x 20000...
I tried to upgrade to windows 7 to 10 and got the error code 0 x 20000... What is - this and can I fix it?
Read that it can be a possible solution:
J W Stuart: http://www.pagestart.com
Maybe you are looking for
-
How to copy contact from another list? No traveling.
How to copy contact from another list? No traveling.
-
Satellite P305-S8820 - FN key not working after a clean install of Windows 7
Hello I have a Toshiba Satellite P305-S8820. I recently did a clean install of Windows 7. I loaded the value Toshiba driver pack and the trackpad driver but still cannot get the trackpad or press FN to work. Any ideas?
-
Plans to buy a new Macbook Pro. I have a backup of my library of photos on an external hard drive, I can only copy to a new Mac? If so do it then after I copied? If this is not the case, what should I do?
-
Nodes property RT for Typedefs
I add a new feature to an application of the CR for which I would like to maintain scalability and flexibility by using a type of cluster definition. The cluster will represent the channels to use for a particular modular Subvi. I will reference this
-
Hello I have an OfficeJet Pro 5400N and have just replaced the black print head. I allowed the printer to make flow through of routine tests. When the function print something (document only, pages I do not print photographs) I always get an extra pa