I had to use disk reformatting hard back to the factory settings. I forgot to backup my pictures files. Is any way to recover this file?

Similar Questions

• Back to the factory settings on my Portege M200

  Hello!
  Can someone help me with my Portege m 200 back to factory settings without using the recovery CD/DVDs. My problem is that the m200 have only an extern CD/DVD device.
  /Jens

  Hello

  without using the recovery CD restore you can Windows system or you use a full Win XP installation CD and use the recovery console to repair the sytem!

  Good bye

• Aspire E-531 boots but Windows 8 will not load. I need to get back to the factory settings

  I don't have the D2D option in BIOS > hand - so I can't activate it :-)

  and go to F10 when booting has no effect.

  When I look at the disk (on the computer) I see drives C: and RECOVERY (Y)

  so I was wondering what to do next?

  Thanks, I tried this method of "brute force" by running GParted - but there is 'no screen available' when GParted loaded (!), so I couldn't go any further

  However trying the different (Legacy vs UEFI) BIOS settings I had the D2D option to appear.

  After you have enabled the option and AltF10 I entered a custom screen set - must be the entity "Windows Boot Manager" with - and I have the options to restore the computer. FACT!

  My first brush with UEFI... Thank you

• How do I get my Toshiba Satellite (Windows Vista) back to the factory settings?

  I need to wipe my computor because I'm selling it and want to make sure that all information is deleted until I do. However, I don't know how to do this. It's a Toshiba Satellite L300-1AQ opertating with Windows Vista.

  I need to wipe my computor because I'm selling it and want to make sure that all information is deleted until I do. However, I don't know how to do this. It's a Toshiba Satellite L300-1AQ opertating with Windows Vista.

  This tutorial apply to you?

  Toshiba laptop - reset to factory settings
  http://en.kioskea.NET/FAQ/4811-Toshiba-laptop-reset-to-factory-settings For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Do I have to select delete using Disk Clean-Up to correct the winsxs problem of scanning.

  I know this question was asked by many and I tried different patches. (File Checker system, the disk cleanup - but do not know what that should be deleted that it can fix) Do I have to select delete using Disk Clean-Up to correct the winsxs problem of scanning.

  The only thing I'm wondering: what is the cause of the accident of the Winsxs folder while scanning?
  As stated in other threads, winsxs folder causes the scan hangs any scanner is used. Is it because of the size of the folder? What is a particular problem in the folder?
  The file it crashes on changes each time and that makes it more difficult to identify the exact problem.

  If the problem is directly on the winsxs folder and not the compromised computer with virus, malware, etc... There will be a fix to it by Microsoft? Or if the problem is not related to the Microsoft Windows software?

  I just want to be sure that the crash of the scanner is not due to viruses, software, malware or any other infection.

  Hello

  No it resets just the Windows Components update, do not recharge updates.
  See the information on the links. Just to make sure that other resources
  as the registry are configured correctly to allow the update. It is '' possible. ''
  that an update can be reapplied after running but this is rare and not
  probably for more than a few. New click the link for more information.

  Personally I have not use the clean tool component if the choice is
  your. Run the reset and first of all to see these help.

  ===========================================================

  Windows component clean tool

  The component of Windows Cleanup tool (COMPCLN.exe) allows you to delete the files that are archived after Windows Vista SP2 or Windows Server 2008 SP2 is applied. It also removes the files that were archived after Windows Vista SP1 has been applied, if they are on the system. Running this tool is optional.

  Installation of service packs of Windows Vista increases the amount of disk space used by the operating system. This space is used to archive files so that the service pack can be uninstalled. As a general rule, you must run COMPCLN.exe if you want to recover this disk space after applying SP2, and you won't need to uninstall SP2. After you run this tool on an image, you cannot uninstall Windows Vista SP2 or Windows Server 2008 SP2.

  This tool can be used online or offline.

  Option	Description
  /? or /h	Displays this list of command-line options.
  cent: [chemin_repertoire_windows_hors_connexion]	Specifies the path to the Windows directory of the Windows partition in offline mode.
  / quiet	Runs in quiet mode. No console output is provided.
  / Hide	Hides all packages (service pack) that are cleaned.
  verbose/Verbose:	Provides additional diagnostic data in the log file.

  Important
  Once completed, you will not be able to remove Windows Vista SP2 or Windows Server 2008 SP2 from the computer online or offline.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Brought back to the factory lost Ms one note

  Recently, I came across a player called Q on my computer and it couldn't access the drive, I followed some advice on an online form, nothing will do. One post suggested I back up my computer and bring back the computer as long as the plant. I hesitated because I couldn't afford to lose my computer. I backed up my computer on a Transcend 500 GB hard drive. For some reason when the computer a setback for my HD Transcend factory has been unable to bring the majority of my computer and only recovered back some documents and photos, lost all my docs in a single note and not really why. I talked to a guy at the shop where I bought my computer and told me once he goes back to the factory that went but I am convinced that it is recoverable, but for some reason, I was told, they are unable to do this and my only notes have disappeared. For some reason, they were unable to start off my Transcend hard disk and my a note was not accessible. So I am completely screwed out of everything I have in a note from Microsoft now? Transcend seems pretty useless after that because he created everything in a backup on the hard disk, but does not allow access to recover this. I was told to buy Norton Ghost, this operation can take a picture of the system, but Transcend image is inaccessible for any reason system.

  I have a HP Pavilion dv6 Windows 7 64 bit

  A reader of Q is used by Office click to launch products, generally Office Starter and partition, Q, is not accessible to the end user.

  His is not entirely clear if you have saved by using windows backup or if you have used a Transcend utility and how to recover your data depends on what use you to save in the first place

  Norton Ghost are any other imaging utility won't help recover your data

  Once a PC is restored to factory state you lost everything that was originally on the PC, although if the recovery created a windows.old folder, you will be able to recover your data originally saved in the default location for Documents

• Can I go back to the factory setting after a new product windows, was intalled

  Windows 7 was installed on my computer (unbeknownst to me) by my friend to kid. I get this thing say activation has expired, and I need a product key. A friend don't know where is the Moose package, so I'm stuck either with the purchase of a product key that is over $ 100 or I wanted to know is any way to restore my system to window Vista? I don't have a CD as Vista is already installed when I purchased computer.

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• How can I restore my COMPAQ Presario CQ60 back to its factory settings?

  How can I restore my COMPAQ Presario CQ60 back to its factory settings? I backed up all my files on an external hard drive and want a clean computer.

  Hello

  For HP, methods and specific tools check with the help of HP, online documentation
  and ask the HP Forums.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Setting up Deskjet 6988 for wireless printing after a reset to the factory settings, using Mac OS 10.8

  Hi - How re - connect to my printer wirelessly after a reset to the factory settings? I use Mac OS 10.8. The network on the printer flashes, and on the Mac, it is listed as "not connected". And the page of report confirms that he has lost all of its data.

  Fortunately, I made a report page before resetting, so I think that I know all of the critical information, I need to come back here, but I can't figure out how to do this.

  I read the installation guide, who said to use an ethernet cable and the CD of HP, but I don't have the CD anymore.

  I tried an ethernet cable and entering the IP address of the printer, but which did not, perhaps because it has more this IP address.

  I tried the steps hereand downloaded the latest version of the HP update software software, but I don't see my printer. I went from my wifi to hpsetup network and then I could see and add a second new instance of my printer, but it did not help, because this second instance of the printer is not connected or the other.

  Interestingly, when I am connected to hpsetup, I can print.

  Can someone help me to re - connect this printer? I'll save the reason for reset for another post!

  Thank you very much!

  FIXED! Sunshyne2005, thanks a lot to direct me to the solution!

  Here's what worked:

  1. Connect to hdsetup
  2. Press the report Page button on the printer (the one with the box)
  3. Continue with step 3 of the Sunshyne2005: open a browser and enter the IP address of hdsetup.
  4. Look around for the wireless configuration wizard (sorry, I can't access is no longer hdsetup, and I just don't remember where it is)
  5. Enter the SSID (name) of the wireless network and the password
  6. Note: You will see a button to finish, but it has no effect. At this point, the printer is successfully added to the wireless network and access the hdsetup disappears. Therefore, the wizard will no longer work, but the important thing is that the printer is connected. : )

  Thanks again, Sunshyne2005!

• My husband installed windows 7 and I don't like it at all. I want to go back to my factory settings and do not know how to do this. Help, please!

  I have a Hewlett Packard and my husband has windows 7 installed top and
  I do not like.  I want to go back to the original settings and I
  don't know nothing about it.  Please help me.

  New computers that come pre-installed with Windows often have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  This is how the recovery partition is available for the most popular brands

  For Dell, press CTRL + F11 directly after switching on the device

  For HP, press F11 directly after switching on the device

  For Toshiba, press and hold "0" BEFORE and during the power upward

  For Acer, press and hold ALT + F10, as soon as you see the logo

  For Asus, press F9, as soon as you see the Asus logo.

  Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"

• Windows 7 and bios sees not the hard drive, but when I connect the hard drive to the USB with an adapter, I see directories and files

  Please, I need pc

  Original title: windows 7 and bios does not see the hard drive. but when I connect the hard drive to the USB with an adapter, I see directories and files... Ive a hp Pavilion, what to do?

  Check the BIOS for hard drive setting.

  Make sure that you do not connect the drive to a SATA/RAID port.

  Old IDE drives - check the jumper on the drive (use "Cable Select" as a starting point), the BIOS must also be set in legacy/compatibility/IDE mode. Note: If you currently use the AHCI mode, then switch to IDE mode may cause Windows to boot.

  J W Stuart: http://www.pagestart.com

• How can I reset my MacBook Pro using El Capitan 10.11.4 to factory settings?

  How can I reset my MacBook Pro using El Capitan 10.11.4 to factory settings?

  Factory settings? As in totally blank? What to do before you sell or give away your Mac - Apple Support

  If you keep the Mac, just look at step 6.

• How do I restore the factory settings without recovery disks

  I'm trying to restore my laptop to its factory settings but I don't have the cd to do it with.
  I have bin told I can do using bios by pressing f8 at the boot screen.

  I did it and taken to system restore settings, but I can't find any option to reset to the factory settings.
  The options I see won't let me restore to factory settings.

  Can anyone help?

  Hello

  When you start your notebook F8 repeatedly press. You enter the Advanced startup options. If you n t change anything on preinstalled HDD (delete the second partition, change the structure or installed other OS partitions), you will see option to fix my computer.

  When you start this option, you enter The System Recovery Options. Last option, there are Toshiba Recovery option.

  When you choose this procedure of recovery option should start and you should just follow the menu on the screen.
  All that s!

• After the update (December 2015), Camera Raw does not fit on the save new Camera Raw default.  It keeps coming back to the default settings.  Does anyone else have this problem?

  After the update (December 2015), Camera Raw does not on the save new Camera Raw default.  It keeps coming back to the default settings.  Does anyone else have this problem?

  Yes, this is the same bug.

  The engineering team working on it.

  We have no fixed timeline.

  In the meantime, you can restore the previous update.

• How can I restore my empowering technology from acer asire Home premium back to factory with a recovery disk? All the factory settings have been destroyed, and windows vista ultimate sp1 has been installed on my computer.

  I have an acer aspire 4720z / with windows vista home premium / with the enabling technology / processor intel pentium dual core. I think I downloaded a program limewire lennex, it was suppose to be something else. Somehow that he closed my computor, luckly my cuzin was able to download windows vista ultimate SP1 64 2007 multimedia content on my laptop so that I can at least use MY COMP. But I think I like the version that is installed on my comp.better to the ultimate version on my comp.now, it does not seem as before prefome. Some things on my computer laptop don't prop wk. What should I do, go back to my version Home premium of moose? If so how to do that? I don't have a home premium recovery disc. I tried to install the updates of windows SP2 64 thought repairs that would set back 2 the origonal but settings it na not or at least update the ultimate version do you think I should do.

  If you have downloaded Vista Ultimate and not bought, you use pirate software.

  You will receive NO Support for pirated software.

  If this does not work, contact Acer:

  http://www.acerpanam.com/Synapse/forms/portal20.cfm?RecordID=853&formid=3390&website=AcerPanAm.com&siteid=7117&words=all&keywords=&areaid=2

  Acer eRecovery made

   

  1. on the Acer splash screen, you can press Alt and F10 (at the same time press F2 to enter the BIOS) to make it appear a version BACK style eRecovery.

  ·        The unit is able to reload Windows from this mode faster then CD.

  ·        The default password is 000000 (6 zeros) and it is shown when you are prompted for the password.

  ·        Users are able to change the password in this mode for eRecovery only.

  ·        The system can retrieve the hidden on the hard disk (partition PQService) image or a CD/DVD media.

  ·        It is possible to reload the factory CD/DVD style or snapshots that creates the eRecovery Windows version.

  2. in Windows, there are 3 ways to access eRecovery functionality.

  ·        Press Alt and F10

  ·        Open Acer eManager and then double-click eRecovery.

  ·        When a system is new it should automatically open this application and invite you to do the recovery media.

  3. the Windows version of the eRecovery program is stronger then the Dos Version. Below you will find the various features of the Windows version:

  Recovery settings: create backup files and change password

  ·        Picture of the backup snapshot (create a disk image of your system configuration)

  1. the system is able to make a CD/DVD image of the current state of mobile software including customer programs installed.

  2. This CD/DVD is usable in Windows and DOS of the program version.

  3. the drive should start, but isn't always.

  4 when a snapshot is in fact the image is on the D: partition and then can be burned to disc if eRecovery is said to.

  ·        Burn the Image to disc (create a backup disk)

  1. you can create 3-7 CD or DVD 1-2 such as those that were sent with the units before eRecovery.

  2. the serious CD are equal in usage to the system recovery CD and CD

  ·        Remove data from backup image of capture instant user (if available)

  1. This is how delete you the snapshot on the D: partition images

  ·        Password: (change the eRecovery password)

  1. measures: restore your system using an existing backup file or restore the default configuration in your system factory.

  2 backup copy using one of the snapshots has been filed or the original image on the D: partition.

  4. made eRecovery

  ·        When the hard drive is replaced the system loses its characteristics eRecovery. These features are on the hard drive and cannot be reinstalled.

  ·        When reinstalling from the CD/DVD's you will lose the eRecovery program but the DOS version can still function, as if uninstalled, you can not reinstall.

  ·        eRecovery uses Ghost (as well as the use of our recovery CD) to create snapshot images.

  ·        If the PQService partition is removed using fdisk or a utility under Windows, you may need to reinstall Windows.

  ·        If the system is recharged using the DOS version you retain the eRecovery feature

  Mick Murphy - Microsoft partner