I have 16 GB of RAM, but said 2.98 GB usable

Similar Questions

• running windows 7 64 bit sp1 have 6 GB of ram, but windows says usable only 3.29 concerts

  running windows 7 64 bit sp1 have 6 GB of ram, but windows says usable only 3.29 concerts

  JAC

  Where are you seeing the 3.29 "usable"?  It would be fair that the rest is in fast cache.

• I have 4 GB of RAM, but when my i play any game, my CPU fan runs at high speed and my system gets shut down within minutes.

  I have 4 GB of RAM, but when my i play any game for example NFS most wanted, my CPU fan runs at high speed and my system gets shut down within minutes. Help me solve this problem

  If you overclocked?  If so, cancel that.  If the games you play are poorly written, it is not that you can do about it.  If you have not cleaned the dust and lint from your computer within a certain time, you should do that because it accumulates and causes overheating.  For desktop computers, remove the cover and carefully use compressed gas to blow off the dust, especially around the fins in the processor heat sink and air ducts.  For a laptop, I'll ring gas compressed through the ventilation openings.

  Good luck.

• HP 1000-1312tu had installed 6 GB of ram, but it shows only 929 usable

  my laptop running windows 7 ultimate x 32 .intel (r) Pentium (r) @2. 40 GHz I have 6 GB of ram installed and usable only 929. I already tried many things and I can't do bugs... Please help me

  Hi @minxfiles ,

  Welcome to the HP Forums!

  This is a good place to find answers and advice!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that you have 6 GB of ram and it is only readable 929 reading.

  Just to be sure you're correct DDR3 ram installation?

  Installing the chips of RAM, they must be of the type suitable and properly matched.  You can have 2 @2 for 4 GB of ram or 2@4 GB to 8 GB of ram. To have 6 GB of ram, you would need 1@6 GB to 6 GB of ram.

  If you have added a 4 GB of ram with the original 2 is it came with, it is very likely what is causing the problem.

  Good luck!

• I have 8 GB of RAM, but I am having major problems with my pc. Error message when I could actually run diagnostics said system is excessive paging. Help, please.

  Have also run the Windows memory diagnostic tool, but system says there is no problem. Have tried everything. Startup Repair is also no problems but there obviously, it is because although the Office seems normal when you can actually get for her, he is immediately frozen and I can't access anything whatsoever files, internet, e-mail. Fortunately, also a laptop so I tried to find help!

  Hello

  • What is the brand and model of your computer?

  There are several reasons why you may experience excessive paging.  If you do not have enough RAM to run Vista and all additional progtams, then your computer is using your hard drive as additional or virtual memory. Thus, when the system uses the hard disk as memory, excessive paging that is more.  It is therefore possible, you need to add more RAM to your computer.  If you have less than 2 GB of RAM, you can consider adding more.

  Another reason why this might happen is if your computer is infected with a virus that uses system resources.  So to run a full virus, malware, spyware, trojan, scan your computer to make sure that it's clean.

  Microsoft Security scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  These articles will explain what is virtual memory, how much your computer is currently using and how to change or adjust the amount of virtual memory available on your computer.

  What is virtual memory?
  http://windowshelp.Microsoft.com/Windows/en-us/help/fd3e9104-1076-4600-9F9D-8739849387ec1033.mspx

  Discover how memory is using your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/6e566289-20FA-4ED4-BDDF-0b36a77b003c1033.mspx

  Change the size of virtual memory
  http://windowshelp.Microsoft.com/Windows/en-us/help/89ca317f-649D-40A6-8934-e5707ee5c4b81033.mspx

  Prevention of problems of memory
  http://windowshelp.Microsoft.com/Windows/en-us/help/34955e8d-9e3b-4f68-8e7d-773c167c61e21033.mspx

• HP Workstation Z200: What RAM is the best for my desktop PC I have 4 GB of Ram but I am a graphic designer, I need more

  Dear Hp/member of the team

  Hi, Shan here and I am Web Designer, graphic designer and also a tech person. I am currently working on my own website and project so I have work chart desigining as well as with YouTube tutorials to help people.

  Question: I want to improve my system RAM, on model HP z200 workstation but I don't know which model and how much speed of ram I can install in my system. ?

  One last thing, I have 2 jacks in my system which is total 4 GB of ram in my system so I have need for 4 GB more for my computer, but can someone help me 1333 Mhz is better or I can install also memory 1600 Mhz RAM?

  What ram company is the best? Kingston, or other?

  Hello

  Please try:

  http://www.crucial.com/USA/en/compatible-upgrade-for/HP-Compaq/HP-Z200-workstation

  Features of the RAM:

  DDR3 PC3-12800 • CL = 11 • unbuffered • NON-ECC DDR3-1600 • 1.5V 256Meg x 64 • •

  You can buy from them, or use the information to buy elsewhere.

  Concerning

• I have 4 GB of RAM, but only 3.75 GB are usable/available: why?

  I bought a desktop computer Dell Inspiron 400 in 2010.

  It has a processor AMD Athlon 2650c installed with a captivity of memory RAM of 4 GB but only 3.75 GB is usable or available, why? Where's the other Go.25?

  There are a few possibilities.  If you use a 32-bit operating system, there is not enough bits of address (to use) more than this amount of memory, so the rest (le.25) is literally inaccessible to the system.

  If you have a 64 bit OS and it still shows, it is because your system is reserving some of them to be used for low level such as video memory system functions.

• I have installed 2 GB RAM but memory in drive c is 78 GB how to develop

  information: I install windows vista (Home premium) in acer veriton s661 in the information system, the RAM is 1.00 GB (c drive Go 76.3) pass to 2,00 GB but c drive not extend the same memory in GB 76.3 How unzip?

  To add to the response of Rey, if you want to significantly increase your hard drive space (76.3 GB you have now) you need to add a new larger hard drive - you can get this done professional if you are not competent to do it yourself. You may be able to regain some disk space on your hard disk existing with the disk cleanup tool:

  http://windows.microsoft.com/en-US/windows-vista/Delete-files-using-Disk-Cleanup .

• I have 512 MB of RAM, but the system is grateful that 448 MB. How can I fix? Thank you.

  I have AMD Athlonrocessor with 512 MB of RAM. Information on the system says that I have only 448 MB of RAM and the pc works really slow. This may be the cause and how can I solve this problem?  Thank you.

  Annica

  The other 64 serves as video ram and it's perfectly normal.  This isn't the reason why the computer is slow.  You have an old operating system, with very little ram, and I'm sure that you use a lot of app.

• have 8 GB of ram, but seems like all cached then run IE9 makes so slowly. Is there a way to clear the cache

  have hp computer with 8 GB of RAM running on vista 64-bit and see lately all put physical memory cached in the Manager of tasks with almost no free left.

  is there a way to clear the cache?

  Thanks in advance

  The value specified in the 'Cache' in the Task Manager includes more than the real system file cache. In particular, it includes the pending list. There are programs and files that have been previously referenced and the Windows file previously read. The waiting list pages can be reused immediately if an application requires more memory. There is an article with the definitions of the terms used and an introduction to the management of memory here:

  http://blogs.msdn.com/b/ntdebugging/archive/2007/10/10/the-memory-shell-game.aspx

  To see your use of memory more in detail, download and run Process Explorer from here:

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653

  Go to view > system information. (or Ctrl + i). Select the memory tab and view the information in the left column under Commit Charge and physical memory.

  To better answer your question, please provide the following details.

  • Describe in more detail what you mean by Internet Explorer is slow.
  • Being of other applications of runs slowly or only Internet Explorer?
  • How many tabs you have open and how many other applications is running when Internet Explorer is running slowly?
  • You are running Internet Explorer 32-bit or 64-bit? See this article to know that if you do not know: http://blogs.msdn.com/b/ieinternals/archive/2009/05/29/q-a-64-bit-internet-explorer.aspx
  • In tools > Internet Options > advanced, which is the scene of "use the software instead of rendering GPU rendering?

• ProBook 4720 s Windows 7: I have 4 GB of RAM but only 2.99 GB is usable

  Specifications for the ProBook s 4720 said memory maximum support is 8 GB, so of course material and the BIOS can support more than 4 GB.

  I just added 2 GB to the original 2 GB.  The computer properties is reported now only 2.99 GB usable.  I can understand if the chipset and BIOS has a limit of 4 GB.  Why is - what happens on my ProBook?

  I couldn't find anything in the BIOS, set up that could change that.

  Is all the same to recover the missing 1 GB?  Thank you.

  its because your shared video memory use. the embedded video processor uses a certain amount of memory in the computer for video output...

• I have 8 GB of RAM, but computer shows only 2 GB as usable. How can I get the computer to see the other 6 GB?

  Installed 8gbs of windows 7 on a dell xps700, usable 2gbs RAM. How can I get the computer to see the other 6gbts.

  Original title: usable ram

  More than 2 GB says:
  http://support.Dell.com/support/eDOCS/systems/XPS700/en/SM_en/specs.htm#wp1057323

• In Windows 7 has 4 GB of ram but only 2.75 gb usable

  I have
  Win7 32 bit os.
  AMD phenom II x 2 550 processor
  4 GB of ram

  but it shows only 2.75 GB usable.

  Why so much?

  A 32-bit operating system is not able to use more than 2.75 GB of RAM (maximum addressable memory is 2 * 32, which is about 2.75 gig). In order to use full 4 GB of RAM, you need a 64-bit operating system.

• 6 GB of RAM but only 2.4 GB usable

  Hi all

  I've recently updated my laptop Dv6-3121TX with 6 GB of RAM and works with win7 ulimate(X86), but it shows only 2.4 GB usable, so please if my RAM is not working or there a limit for win7 ultimate

  Please help me with this situation

  Thakurs wrote:

  ... with 6 GB of RAM and works with win7 ulimate (X 86), but it shows only 2.4 GB usable, so please if my RAM is not working or there a limit for win7 ultimate

  Hello

  X 86 Windows will not be able to see more than 4 GB, so it will not work. Now, JUST try to 4 GB to see (and normally its usable is around 3.25 to 3.75 GB).  If you want to use more than 4 GB, you need 64-bit operating system.

  Kind regards.

• Have 4 GB of RAM on Satellite U400 but says OS only have 2 GB

  Have recently downgraded notebook Toshiba Satellite U400 (model PSU44A-00J00C) of original Windows Vista business to Windows XP Pro (pack 3 update service) assistance of the system recovery discs. Have 4 GB of RAM installed on the laptop with 32-bit system and was reading that this amount with Windows Vista, but now the figure has decreased!

  I got the digits in the information system:

  Total physical memory: 4 GB
  Available physical memory: 2 GB
  Total virtual memory: 2Gb
  Available virtual memory: 1.96 GB

  My available physical memory should not read at least 3 GB? BIOS is reading at 4 GB. Have updated the bios and chipset without change.

  Want to tighten a little more memory to the computer, since I installed it - is the best I can get 2 GB?

  Thanks for your interest, look forward to your response.

  Hello

  Start the DirectX using the dxdiag command.
  You will find a few details and the info about the system.
  The news of RAM should be available as well check what it says DirectX.

  PS: Win 32-bit must be present about 3.2 GB of RAM. It's max and limited by the 32 bit OS.