I have a game called lego rock raiders that it installs but wont run with d3drm.dll. I tried to download this file, but the game still does not work

Similar Questions

• How do Dungeon Siege (game) still does not work?

  I found this discussion (link below), but as many people (including some noted it here), this solution DOES NOT WORK for me.  I get "Exception caught Gathering exception data [this can take several minutes]" as the error with a black screen.  And I could wait 3 hours and still nothing happen.  I receive as messages "this program is not compatible", which indicates that she has not been fixed or patched in any measure.  I use the "Xplosive" 3 CD pack published by guess who?  Microsoft.   It seems suspicious that many games Windows XP works fine, but those published by Microsoft does not work.  Isn't a little backwards?

  You can do all sorts of apologist excuses like "it is an old game and no one cares", but if nobody cares, so why people keep posting questions here and anywhere online?  I think you're all just try to shut us up.  And why... for what?  You may think that I'm just a cheapskate.  I'm not just be cheap, I enjoy this game and want to play again.  It's like a song.  If you insist that I ever listen to 'Sail Away' of Styx again just because it is old?  I bought it is game with a lot of money in good faith and I expect to work.  Really, it will cost you a whopping hours of your development time for a post patch.  I have no pity for you and Yes, you can bill me (better yet, when you come out with a new version of windows, just me to pay for a "maint game package" which covers your expenses, as I said, I'm not cheap, I like just the old games).

  If you decide to publish something, then you have a responsibility.  But giving someone something and then taking it are a sure way to frustrate and annoy your users and make people angry. That's why I have no shame to be really angry and frustrated, it's how I feel in this situation.  Only one unreasonable and illogical would be satisfied with this.

  That said, if someone has a different suggestion outside (because it does not work for me on Windows 7 and is not enough anyway because he keeps the messages "this game is not compatible")... Please respond and make the suggestion...

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-gaming/how-to-install-Dungeon-Siege-legends-of-Aranna/c0ac8fa0-6053-4622-882D-4862f75fd9a1

  As noted, the above link leads to a '' correction '' that does not work for me or another poster in this thread.  As well, "compatible" message did not go for anyone no matter what you do.  Actually, I have a Windows 95 laptop I keep for all of these emergencies.  It is ridiculous to have to use it for this purpose but it seems that Microsoft prefers I should do instead of using Windows 7 or something more modern.  Ok then.

  Hello

  Sorry for the late reply.

  You could try the Meghmala solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-gaming/Windows7-how-to-run-Dungeon-Siege-2-broken-world/7e31d310-3cb0-400e-b0fb-146d33c26cf0

  Dungeon Siege and Windows 7 x 64

  http://www.deathmarine.com/Dungeon-Siege-and-Windows-7-x64/

  How to play Dungeon Siege on Windows 7http://gaming.stackexchange.com/questions/7431/how-do-i-play-the-original-dungeon-siege-on-windows-7 original

• I am now on iOS 9.2 Game Center still does not work. When I open the app it freezes on a blank page. When I open the Game Center in the settings, it freezes and then crashes. Please Apple can solve this problem of Game Center iOS 9.2.

  I am on iOS 9.2 and Game Center still does not work. When I open the app it freezes on a blank page. When I open the Game Center in the Middle it hangs just. For this reason, I can't back up my data on my games. Please Apple can solve this problem of iOS 9.2.

  Hello Vaishnav,

  Thank you for using communities of Apple Support.

  I see that you are having problems with Game Center on your iPhone. I have a number of things for you to try.

  First force quit Game Center.

  1. Press the Home button twice quickly. You will see small glimpses of your applications recently used.
  2. Swipe to the left to find the Game Center app to close.
  3. Swipe up on the preview of the Game Center to close.

  Force an app to close the iOS

  If this does not work, then the next step would be a restoration. I recommend restore like new, without backup restore and everything first. If it works there, you can restore the backup.

  Use iTunes to restore your iPhone, iPad or iPod to factory settings

  Best regards.

• Save the game version does not work

  Save the game version does not work. I have recently converted item 6 to 8 items. The conversion went well without any problems. The organizer and the editor work very well. However, when I try to save a file modified in the editor, I have an impossible to save the defined version (impossible to check the box). I have tried to fix my catalog and I reset the preferences of the Publisher without success. Does anyone have any suggestions?

  I have included the news system and a path:

  Organizer of items 8.0.0.0
  Basic version: 8.0 (20090905.r.605812)
  Language version: 8.0 (20090905.r.605812)

  Current catalog:
  Catalog name: elements
  Location of the catalog: K:/elements
  Size of the catalog: 206.8 MB
  Catalog Cache size: 1.6 GB

  System:
  Name of the operating system: XP
  Version of the operating system: 5.1 Service Pack 2
  System architecture: AMD CPU Family: 15 12: model step by step: 0 with MMX, SSE whole, SSE FP
  Built-in memory: 2 GB
  Free memory: 1.2 GB

  Important factors / plugins / libraries:
  Microsoft DirectX Version: 9.0
  Apple QuickTime Version: 7.10
  Adobe Reader Version: 9.1
  Adobe Acrobat version: Not installed

  CD and DVD players:
  C: (BUS PIONEER DVD - RW: 1 ID: 1 Firmware: DVR-108)

  File:

  K:\Elements\Elements\2009 10 11\

  Move all files and records except those containing photos, which I think are:

  Items (folder)

  More photos (folder)

• When I enter a Web site in the url of the Enter key does not work. I have to click on the arrow at the end of the line. Is this a configuration problem?

  The Enter key does not work in the line of the URL. If I go says:
  www.Bing.com
  and then press the Enter key, nothing happens.
  I have to click the arrow at the end of the field in order to activate the link.
  If I am anywhere else on any page the Enter key works as it should.

  Please click the button of resolved next to the answer that solved your problem of Firefox support, when you are connected.

• Game Center does not work after update to ios9.2 also the games who need freezing when loading so I can't play you can solve this problem, so I can play games on my ipadmini2 again?

  Game Center does not work after ios9.2

  problem known, search the Forum, many details.

• I have a Toshiba satellite L455D laptop and the touch pad does not work

  If I plug my usb wireless mouse that works, but when I unplug it the touch pad does not work

  Have you checked to see if your laptop model has a physical button around the mouse pad that allows & turns off?  If it does not, many cell phones often have a software switch that can toggle the on & off power mouse pad.  It is usually triggered by a combination of function keys (key Fn + one of the F1 to F12 keys).

  Take a close look at the row of the top of your keyboard and see if you can find a key that has a small symbol that looks like a mouse pad.  If you find one, try pressing it in combination with your Fn key to see if your mouse pad features returns.

• I have a Hp and the micro build does not work how to fix this?

  Can someone help me please? I have a HP T5800 and the micro build does not work how can I solve this problem?

  Hello

  Check with HP, their drivers support and documentation online and ask in the forums about known issues.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ========

  It's probably the pilots who are responsible and who may not really be later or they need to be
  re-installed anyway. The best way is to manually review using the methods below.

  References to Vista also apply to Windows 7.
  
  Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek High
  Audio definition (this is an example and you can have an other name/maker).

  Write the description and the model double click on it - tab drivers - write down
  Version. Now click on update drivers who cannot do anything as MS is far behind certifying
  drivers. Then CLICK RIGHT on it and UNINSTALL - REBOOT - this will rebuild the driver
  stack.

  You can have the default windows or a former certified pilot and it's all or part of the
  issue.

  Now, go to the site of the manufacturer of the system and get the latest Audio/Sound drivers - download - SAVE - go to
  where you put - right-click on Reboot - RUN AS ADMIN-

  Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
  and then install the latest version. Restart and check after each test, not
  rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
  installed shows upward on the tab of the driver.
  
  Go to the site of the manufacturer of the device, and then search for the even more recent drivers and install repeat
  operating mode. Download - SAVE - go to where you put them - click on - RUN AS
  ADMIN - Reboot

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (updated drivers manually using the methods above is)
  to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check see the
  Disconnected devices and show disabled devices - check your micro - highlight
  then on lower right properties. Make sure that the appropriate injector is selected and check
  other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  The volume of the audio recorded by sound recorder in Windows Vista or in Windows 7 is less than
  in Windows XP (or Vista)
  http://support.Microsoft.com/kb/973446

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Microsoft Pinball Arcade, everything works except the right flipper does not work when you run the game. __Keyboard is very good

  Microsoft Pinball Arcade, everything works except the right flipper does not work when you run the game.
  Keyboard is fine.  Is this a compatibility issue?

  ---------------

• j ' have an asus x93s it does not read my dell AIO 926 photo printer all-in-one. I HAVE BEAUTIFUL DOWNLOAD THE DRIVER.CA DOES NOT WORK!

  j ' have an asus x93s it does not read my dell AIO 926 photo printer all-in-one. I HAVE BEAUTIFUL DOWNLOAD THE DRIVER.CA DOES NOT WORK!

  Microsoft answers site provides support in English. The following Uniform Resource Locator (URL) will be low - you receive information appropriate for your set up support. Open the link and get your region from the drop-down list, and then click the arrow to continue.

  http://answers.Microsoft.com/fr-FR

• How I download/install adobe first cc on the D drive because I don't have enough on the C: drive? Ive gone to settings on creative cloud and location of the file changed already but it still does not work.

  How I download/install adobe first cc on the D drive because I don't have enough on the C: drive? Ive gone to settings on creative cloud and location of the file changed already but it still does not work.

  Hi brandong13,

  Here are the steps that you can follow.

  1 change the location of installation using Creative Cloud Desktop App, go to preference > creative cloud > Apps and change the installation location.

  2. delete the folder '%Temp%' and restart the process.

  NOTE: Application is downloaded to the default location, we can only customize the installation location using creative cloud app in this case.

• I'm on the last update of lightroom 5 and captive capture still does not work with el Capitan. are there plans to upgrade or do I have to buy the new lightroom 6?

  I'm on the last update of lightroom 5 and captive capture still does not work with el Capitan. are there plans to upgrade or do I have to buy the new lightroom 6?

  Hi Yanni,

  Tethered shooting works fine with Lightroom 6.4 on El Capitan.

  You can then go ahead and buy Lightroom and perform the tethered shooting.

  Kind regards

  Tanuj

• I have Adobe Lightroom installed on 2 computers. One works perfectly. On the other machine, the adjustment brush does not work.

  I have Adobe Lightroom installed on 2 computers. 1 works perfectly. On the other machine, the adjustment brush does not work. You can hear the fans in the Gallery of the computer up as if he is trying to work. All the other features do not work. I uninstalled and reinstalled Lightroom cc, but this does not solve the problem. Both computers are running windows 7 Professional 64-bit

  Hi Marc,

  Suggest you to reset preferences in Lightroom and then check out.

  Refer to this article: to zero (or "Screw up") the preferences of Lightroom - Lightroom Forums file

  Kind regards

  Claes

• HI - bought a kit of the student.    And for a while creative cloud consulted well.   But now - my access does not work, and he goes to the members section (which I already have).  Also - although I'm going to download bridge and illustrator, I could

  HI - bought a kit of the student.    And for a while creative cloud consulted well.   But now - my access does not work, and he goes to the members section (which I already have).  Also - although I'm going to download bridge and illustrator, I could never get to download Photoshop.

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  .

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• Trying to convert a trial to paid membership, but the payment gateway is showing the location in India and in Indian currency. I am based in the United States have changed in the account setting too but the gateway payment does not seem to be change

  Trying to convert a trial to paid membership, but the payment gateway is showing the location in India and in Indian currency. I am based in the United States have changed in the account setting too but the gateway payment does not seem to change.

  Hi Khushboo,

  On the bottom of the page of Adobe, you will see an option to change the region, make sure that you have the United States he and on the purchase page to change your currency to the U.S. dollar as well.

  Let me know if it helps.

  Concerning

  Sarika