I have a hp mini laptop model 210-1000, it says there is no hard drive.

Similar Questions

• I have a Sony vaio laptop, model # VPCEA36FA, I know the HOME STATION support for this model

  I have a Sony vaio laptop, model # VPCEA36FA, I know the HOME STATION support for this model

  Hello

  Targus USB 2.0 Docking Station model # ACP51USZ is compatible for the computers of the series E I have provided general information.

  For more information about how to contact a Sony centre in another country, please visit the following site:

  https://www.Sony-Asia.com/section/contactus

  If my post answered your question, please mark it as an "accepted Solution".

• I'm moving from Vista to Windows 7. I get a question that tells me that I need a BIOS upgrade. I have an Inspiron 1720 laptop model. Is there a way to find the update is necessary?

  I'm moving from Vista to Windows 7. I get a question that tells me that I need a BIOS upgrade. I have an Inspiron 1720 laptop model. Is there a way to find the update is necessary?

  original title: bios update

  Hello

  you have a problem here as Dell does not have Windows 7 drivers available for your model of laptop etc, etc.

  Unfortunately, you need these Windows 7 drivers, etc. to upgrade to Windows 7

  read the information on your laptop on the link below

  http://support.Dell.com/support/downloads/DriversList.aspx?c=us&l=en&s=Gen&OS=WLH&OSL=en&SystemID=INS_PNT_PM_1720&CATID=-1&impid=-1

  For more information contact Dell about this

  Dell support:

  http://support.Dell.com/

  Dell support at the link above.

  http://en.community.Dell.com/support-forums/default.aspx

  Dell's Support Forums at the link above.

• HP ENVY laptop laptop 15-as032nr: buy 512 GB SSD laptop. You want to add additional 1 to hard drive. Can it be done?

  Hello

  I bought the HP ENVY 15-as032nr with only 512 GB SSD laptop. I want to add additional 1 to hard drive. Can it be done?

  Yes, you have the 512 m2 NVME PCI - e (lucky) drive gig and that goes into a slot and then there is also a slot open for a standard hard disk 2.5 thumbs or SATA SSD. See pages 30-33 of the manual here:

  Repair manuals

  It is likely that your laptop does not contain the HDD mounting kit and cable as shown on page 30 and 31 and this note is in the Manual:

  The disk spare parts kit hard does not include the rubber hard drive support or cable hard drive. The hard disk rubber support is available using the spare part number 857797-001. The hard drive cable is available by using the spare part number 857806-001

  https://parts.HP.com/hpparts/Search_Results.aspx?mscssid=F5105F025E184DADB5A6F058D84F0A48&SearchIn=PartNumber&SearchPN=857797-001

  https://parts.HP.com/hpparts/Search_Results.aspx?mscssid=F5105F025E184DADB5A6F058D84F0A48&SearchIn=PartNumber&SearchPN=857806-001

  An extra $ 66 for the housing and the cable seems a bit strong, but I couldn't find their sale anywhere other than HP Store.

  This isn't a simple upgrade; If you need assistance.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Installation of XP operating system in model of lab manager... No hard drive detected?

  I am currently trying to obtain a model of machine configuration virtual xp in lab management. I have deploy the model, mount the .iso image file, start the installation, but then installing XP spits a message that there is no hard drive detected on the computer. I checked the properties on the machine, there is obviously a hard drive I put in place. It is in the format of BusLogic SCSI parallel. Is there a specific reason for this installation isn't or doesn't see is not the virtual disk? I have not really found something in the help or documentation which speaks of a specific operating system installation issue. Everything is useful, thanks in advance.

  -va

  To install Windows XP, you must have a driver for the disk controller VMware disc. You can consult this article for download one-

  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=1000863&sliceId=1&docTypeID=DT_KB_1_1&dialogID=32908933&StateID=0%200%2029476991

  If that one doesn't work, then, you must submit a request for support and ask management to send you the right driver

• Hi ya'll! I'm still learning how to navigate my way with Lightroom. (Last time I wrote, I got a few responses that work.) Thank!) Now, I have another question. When I try to copy photos to my external hard drive to a CD/DVD, no matter if the make

  Hi ya'll! I'm still learning how to navigate my way with Lightroom. (Last time I wrote, I got a few responses that work.) Thank!) Now, I have another question. When I try to copy photos to my external hard drive to a CD/DVD, no matter if do leave LR or my car, I get the message; "Disc burning is not supported by LR on this computer." I've tried everything I can think of, so, I thought I'd see if anyone can find out if there is something I can do. Or could it be that my computer just can't handle it? Help! So frustrating!  I have a Lenovo PC, I don't know if that makes a difference. Any ideas? Thanks a lot for your help!

  You burned discs with other programs using this computer? Are you sure that you have a drive that will burn the disks?

• Mini laptop of HP 1000: mini windows laptop computer does not start

  My mini laptop from HP is saying windows has not start because the following file is missing or damaged:
  \windows\system32\config\system
  You can try to repay this file by starting windows setup installation CD using the original.

  Hi there @kgoen81

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you receive a message from a missing file, and that your system does not start. I'm happy to help you.

  First, I recommend that make you an external backup of data on the hard drive. There are several ways you can try to do that, but here is a page with a few possibilities:

  How to recover data from the hard drive to a laptop dead - eHow.com

  Also, please post the complete product and the operating system running on your laptop. Check out the following, if you need assistance with this information.
  How can I find my model number or product number?
  Is the Version of Windows on my computer 32-bit or 64-bit?

  For now I'll assume you have windows 8.

  Computer won't start (Windows 8)

  You can also visit this page, and in particular you want to go with the automatic repair options. I would try before using a full system recovery to an original image, on the previous page I linked.

  System - Boot of Windows 8 recovery options - eightforums.com

  I hope this helps.

• I have a laptop Dell Latitude 0800 older with a 60 GB hard drive. Can I put Vista on it?

  I have an older Dell laptop, Latitude D800. The hard drive is 60 gig. Can I put Vista on it? How much space does Vista take?

  Hello Ralph St. Clair.

  # You can not put Vista on it and there is nothing to do with the size of the hard drive, which is acceptable according to the minimum standards of Microsoft.

  http://Windows.Microsoft.com/en-us/Windows-Vista/products/system-requirements

  And Microsoft sells more than Vista.

  I'm sorry but never written/provided by Dell Vista or Windows 7 Hardware Drivers for this Latitude D800 laptop model.

  They only has written/provided pilots until and including the XP operating system

  You need the drivers to make it work properly...

  Read the information on the link of Dell; Click the drop-down operating system:

  http://support.Dell.com/support/downloads/DriversList.aspx?c=us&l=en&s=Gen&OS=WLH&OSL=en&SystemID=LAT_PNT_PNT_D800&CATID=-1&impid=-1

• My laptop does not recognize that there is a hard drive and so I can't eject one who is stuck in it. What should I do?

  I inserted a disc in the drive and it does not recognize the drive and the disc, so I tried to eject, but I can't. So far nothing online seems to have helped. What should I do?

  Hello

  For the readers of the status bar:

  Sometimes they get stuck. There is a small hole on the front of the CD drive that you can stick a
  a paper clip that will release him and the reader to open.

  Create a trombone in car Opener
  http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

  Open a CD/DVD player with a paper clip.
  http://www.josepino.com/?open_cd-dvd_paperclip

  =================================

  For the readers of the slot:

  Check with the manufacturer of system on how do to eject the disc.

  Dell xps m1330 dvd drive will not eject cd inside<-- check="" these="">
  http://www.FixYa.com/support/t2643828-dell_xps_m1330_dvd_drive_will_not_eject

  Be careful as you may damage the player using the method below:
  
  You may need to get the driver to work 1 However, this could still work.
  http://www.tech-tweak.NET/2009/11/how-to-eject-STUK-DVD-from-slot-load.html

  The method used on the Mac could work
  http://www.YouTube.com/watch?v=wpWieIoBBrk

  How to disassemble the laptop (Dell XPS M1330)<--- voids="" any="" warranty!="" this="" is="" an="">
  http://ahwee.com/how-to-disassemble-laptop-Dell-XPS-M1330

  Also have heard double tape on a credit card or play can work.

  =======================================================

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• models of 5 and moving animation on external hard drive

  I have a video project created at the FCC. I used a movement 5 for a text within the FCP model. I need to move on an external hard drive for a customer. I consolidated and moved the PCF files to the external drive, but the model came not during. Just the red screen with exclamation point. I guess it's a problem of linking somehow, but have been pulling my hair out trying to figure how to recover the text. Any thoughts? Thank you.

  Animation models are separated from the material FCPX, effects and patterns. Look in your user/films/Motion models folder. You can copy it to the external hard drive, but it will need added to the model Motion record the new hosts. You will also need the fonts used.

• # 500-164 HP model: backed up my files in 2 external hard drives, and then made recovery, came back and recovery error

  I saved my files to two external hard drives and then did a recovery.  After the end of the recovery, it says error recovery and no change to the computer.    I left that screen and booted up, but the computer does not go to the lock screen.  Circle of HP logo lights up and goes, but nothing happens.

  How can I get to the lock screen?   I have tried F11 and Esc.

  BreBruce-Tampa

  Your post shows your PC than the execution of win10, but it comes preinstalled with Win8x.  This means that at some point, you've done setting at Win10 level, and unfortunately, that corrupts the information of HP recovery: HP Recovery Manager blocked after Windows 10 Upgrade - HP Support Forum's - 5170752

  Once you do this upgrade, the ONLY way to perform a recovery after that use HP recovery media.

  Ordinarily, I advise to use HP recovery media to restore your PC to its original state. That would erase the entire disk, format the drive and install the operating system, drivers and utilities HP.
  
  Unfortunately, there is no support of HP recovery related to HP for your PC Product Page. This could be an oversight by HP, or it could also mean that HP stock is no longer the recovery media for your PC.
  
  You can try to contact the HP customer directly, using the links below, to see if you can order them if:

  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!

  ---------------------------------------
  However, HP customer care is generally not available on weekends, so you will have to wait until Monday to contact them.
  ---------------------------------------

  If HP no longer provides a recovery media for your model, a few other sites, you should check are: http://www.computersurgeons.com/ and http://www.restoredisks.com/

  Good luck

• laptop does not start after you install a new hard drive

  HP G60-630us laptop... .replaced hard drive... .installed 3 boot disks... After you remove the last drive, when you click on continue it is supposed to start... .it reads no boot device... . If put you the first disc to start, you end up back where you started... I changed the boot order and put the hard drive first... even starts

  Hello

  That sound great for the hard drive.

  With regard to the problem you have with Windows activation, it's because your laptop is listed as originally came with Windows 7 Home Premium - as I mentioned in my guide for the creation of a sale installation disc at retail, the image that you use needs to be also be Home Premium - IE you cannot move to professional or ultimate edition as the key on your COA label will not work for a different version of Home Premium and there is no way around that.

  The image that should be used is on the following link.

  Windows 7 Home Premium 64-bit.

  You will need to create another disc of installation using the above Image and then use it to reinstall Windows 7 - the activation methods I described previously, then will work fine.

  Kind regards

  DP - K

• Want TS 17 J140us: Laptop computer only supplies not on after adding 2nd HARD drive

  This laptop has an option for a 2nd HARD drive.

  I installed 2nd HARD drive and the laptop does not light.

  When I remove the 2nd HARD drive it is normal again.

  I'm guesing that a special BIOS change is needed to allow the reader to 2nd.

  Anyone know what is the solution?

  Thanks in advance for your help.

  dgtech

  Success!

  I think it was just plugging in the cable needed to be reinstalled.

  I confirmed that the drve was good with an external cable.

  I made the stop while holding down the SHIFT key.

  Once it did not work.

  Then I took out the cable and put it back making sure to he went in the port exactly how is HDD - 1.

  This time, he appeared in the windows Device Manager. I already made the partition, format, assign the drive letter.

  Everything is good to go now. I'm glad, that I have a lot of storage space on my laptop.

  Thanks for the suggestions, have a nice day.

  dgtech

• Laptop HP 255 G3: cannot retrieve... Hard drive test failed

  Crashed hard drive test failure ID: product QAPX62-7977R2-XD7V7F-605F03 ID: G4V03UA #ABA the hard disk capacity: 500 GB Hard Drive 1 Do I need a new hard drive? ... or just the recovery disk?

  A failure of the hardware ID normally means that the hard drive has failed. I have

  Is your laptop still under warranty?

  Check the status of your warranty here.

  Replacing the hard drive is under warranty without cost to you.

  You did a recovery from USB?

• Laptop HP Pavilion TS 15: QUESTION IMPORTANT HERE-new HARD drive and recovery on HP Pavilion Notebook TS

  Is it true that once you replace a new hard drive for your laptop, the recovery media will never work because of a chip in the motherboard?  I got a wonderful help here, but I just read on another post, that once you replace the disk, your screwed because of a chip in the motherboard and only HP can fix it.  Did I just waste my time and my money? Please, please, someone help. Now I'm all confused, thank you very much.

  2nd recovery disc was defective. Receipt again. Everything is great. Nothing to do with the motherboard. Thanks to all supporters HP volunteers, your the BEST!