I have a Hp touchsmart 600-1050 and I also have 3 other laptops running of the internet itself, but I get a message IP address conflict.
I have a Hp touchsmart 600-1050 and I also have 3 other laptops running of the internet itself, but I get a message IP address conflict, why? & How can I fix this problem, thanks Aldo Zapata
An IP address conflict occurs when two computers on a LAN (local area network) or the Internet were assigned to the same IP. IP conflicts between two computers normally make one or unusable both for network operations.
Try below methods
1. for networks where the addresses are fixed (statically assigned) IP, ensure that each local host is configured with a unique IP address.
2. If your computer has an address assigned dynamically, releasing and renew its IP address can bypass IP address conflicts.
Run the following commands in the command prompt:
ipconfig/release
ipconfig / renew
Tags: Windows
Similar Questions
-
original title: Geekkk Squad
I tried to talk with the team of geek on the internet. I keep getting a message that says disable popups blocker. I have it turned on and outside. Nothing... Any suggestions?I have've all took charge. Thank you very much.
-
RTM of Windows 8 installation Fail on Touchsmart 600-(1050)
Has anyone else had much luck RTM of Windows 8 on a Touchsmart 600 installation? My installation starts ok, but after the first reset it everything is there with the logo and the whirlpool circulating. The boot record, I checked and I have a suspicion that he doesn't get Windows to start after the reset.
Anyone else facing this?Just for everyone to know that I finally managed to fix it. It appeared that my question was a known Windows 8 Preview version that Microsoft has released a fix for (http://support.microsoft.com/kb/2727113). Apparently, there's a bug which can cause freezing symptoms I was see and by running the command
bcdedit/set disabledynamictick no
due to the gel to stop. It seems that the update has been released with RTM of Windows 8, so it does not seem to have worked at least the Touchsmart 600-1050. Many other people are reporting that it didn't work either, but as long as the above command will stop the gel I'm happy.
My installation is going well now, work all, all happy. The only thing I needed to update was the touch screen 2.6.9.0 to 2.6.10.0 pilot who has really improved stability. That and the driver for the buttons on the side of the case.
Happy days!
-
How to recover Windows 7 Home Prem OS, after original hard drive failures. I replaced it with a new HD, but can't boot OS and does it have any disk recovery Touchsmart 600 1050, it was purchased nine walmart 2009 by me, prior to this accident, the cd/dvd-rom failed and never returned.
The new hard drive should be of equal size or as to what you had and not the format of the AF.
You will have to order recovery disks, if you live in the USA/Canada, call HP at this number 1-800-334-5144 and see if you can still get a set of recovery disks. Otherwise the site worldwide: http://welcome.hp.com/country/w1/en/support.html
If HP does not have the discs, you can get them at the computer the surgeons who have them:
http://www.computersurgeons.com/p-18105-recovery-kit-gv405av-for-HP-model-number-600-1050.aspx
Needless to say that you cannot get them on USB key that you must repair your CD/DVD drive to use the recovery discs.
-
HP Touchsmart 600-1050 blue screen to install Windows 7
Hello.
I m having some one-time reinstall Windows 7 x 64 Home Premium on a Touchsmart 600-1050.
The system boot on my USB device and the installation program starts as usual. After installation is complete and the operating system starts, it falls to each time a blue screen when it tries to start the drivers. After the system restarts, I fall into the selection of start (start Windows normally or in Safe Mode,...) where I choose to start normally (when I try Safe Mode, it will not work because the installation even isn´t not finished yet). Then he says that there is an error with the Installation, and I have to restart the installation.
I m stuck here and need help please.
BERTL
After hours of troubleshooting, I decided to change the HARD disk. After that, it worked.
(Could that tried earlier...)
Anyway thanks for your reply!
May be closed due to the hardware failure.
-
I have the model of macbook air 2016 with i5 Professor and 8 GB ram... since it's the fastest ssd, but I have not seen all speeds up to now, I want to say is bcz I need to have usb 3.0 USB key or hard drive to see the speed of the ssd to usb 2.0 will work
What do you mean, your message is not clear.
-
I can't download IOS 9.3.1 the download starts but then an error message appears and it stops. I have enough storage, so don't know why this is happening?
Does anyone else have this problem?
It often happens when the screen times out and goes to the lock screen, when I connect to my phone that the error message is re-appeared?
I have the same problem!
-
I have an invalid jpeg file that appear on my screen. He got there when I moved the files to a new folder. I can't get rid of it and it remains visible even when I'm on the internet or have opened another application. It interferes with the applications and documents. I tried to click on (nothing happens). I have the version 10.9.5, processor speed 2.7 GHz Intel core 15, 8 GB 1600 MHz DDR3 memory.
Have you tried a re-boot?
-
Hello
I have an old laptop running XP. It has clogged up big time and need to wipe and reinstall XP. I have no XP disc, but have a license number on the details of the system window.
I can't find a recovery partitionand can not find anywhere to begin the creation of recovery disks.
I've defragged and cleaned files. I did a registry clean not long ago who did nothing.
It was originally my husbands laptop and sat on the shelf unused for 3 years. We now use for recording and playing music only and don't want no other programs about this other than the music software and a pack of office (which we have). I don't even think it should be connected to the internet, because I'm afraid that the updates could corrupt the old programs that we will get on it once sorted.
I can give Microsoft license number so that they can send me XP?
Does anyone know if I need to rethink the connection through the web?
Any other advice?
Thanx
Glenys
Contact the manufacturer of the computer. As the OEM licensed dealer, they had to provide you with a way to restore the computer to its default settings. You may need to pay for it now.
General cleaning of the registry nothing if you try to fix something specific, then you usually just fixed this specific thing. ;-)
What edition of Windows XP? Home, professional or Media Center?
If you have a generic _ Windows XP edition CD corresponding to the product key on the machine sticker (there should be a given, it's a laptop) you may be able to use this generic CD with this product key (or * perhaps *- but not certainly) product key, you can remove the machine using something like Belarc Advisor.
Best bet - call in the manufacturer. I doubt that it is out of business, but if they are: How to replace software or hardware, packs Microsoft service to order and replace product manuals
-
I just purchased Adobe Acrobat Pro Student and Teacher Edition CD and tried to install it but I get a message that my sweet! wear is not up to date, I have OSX 10.7.5 and need 10.9 or higher. I tried to update the software, but I get a message that it is up-to-date.
Have you tried to upgrade the operating system? If so, then is there an error message you get when installing? Please share.
You can check: https://helpx.adobe.com/acrobat/system-requirements.html
Error message: it is so far: Adobe Creative Cloud desktop application uninstalled Adobe apps as up-to-date lists
Concerning
Stéphane
-
That I need to activate my membership creative cloud on my second computer but I get a message telling me that I have already installed on 2 computers, which I did not, and the only option it gives me is to uninstall all of my computers, I am reluctant to do because it works on my main computer (MacBook Pro) and I don't want to ruin that. How to install on my desktop (iMac) counter without uninstalling on my another computer first? My subscription tell me I can have it installed on 2 computers!
that option is not to uninstall, it is disconnected.
Click Yes and disconnect all others. then you can connect on the one you want.
and when you start a program adobe on your other program will give you the option to connect.
end of the number.
-
I try to install CS6 on my new MacBook, but I get a message that I have to close SafariCloudHisto and SafariNotificati. I have nothing open safari form then what is?
Hello
Please see the Installation of Adobe Acrobat asked to close "SafariNotificati"
Hope that helps!
Kind regards
Sheena
-
I have 15.0 FF. When I open FF I always get next message: Norton Confidential does not support FF 1.5, as if I had 1.5. How can I fix it. Have I not a secure site?
This is probably because Firefox 15 is in beta, so norton has not yet added full support for it. I would except them to update their software in the next 3 weeks (15 Firefox gets released in about a week and a half).
-
Can help you, I get access denied you do not have enough words to activate power
I am trying to install a software, but I get this message in Admin: access denied! You don't have enough power words to activate this function.
The message continues to appear over and over again and finally goes and does to install the software. It is on a PC HP mini.
LMV,
I hope that you do not have too much of your own data personal on the computer yet, because if you used I would suggest that you reinstall the operating system to solve these problems.
Go to http://partsurfer.hp.com and enter your name/product number in the search field. The results that arise should include a restore CD that you can order to perform the reinstallation. Yet once, please make sure to save any personal data that you have put on the computer before attempting this.
-Alex
-
Dongle doesn't work, get errors certificate on the screen
Hi I have a pc, and when I try to get on the internet with my new dongle, a message repeat myself that I have security certificate errors, so I can't get on the net to fix and I don't know how to resolve this, the pc was origanally used for a modem by my sister. Does anyone know how to solve this problem.
Hello
1. What is the brand and model of the dongle?
2. have you installed the drivers from the dongle?
If this is not the case, the same install from the manufacturer's Web site.
I suggest you to contact or visit the site of the factory to install drivers and check if that helps.
I hope this helps.
Maybe you are looking for
-
How can I configure sbRIO sync time SNTP in MAX
Hi all I try to sync my sbRIO-9612 to the SNTP server. I use LV 2011 SP1 (Please note: there is a similar topic on the forum EITHER but it does not allow me the question of setting). I downloaded NOR-Mercurihectopascalometer 1.2 and I followed the in
-
XNET - activation of the RPC Server - error
Hello I am trying to load XNet database on my RT goal and now I get the error using the Xnet API. Running multiple remote database manager XNet vi doesn't help not either as it is still stuck with the error and no waiting period. I can connect to my
-
Which sound cards are supported for HP Pavilion p6-2002uk Windows 7 64 bit
-
I have a Dell Inspiron 531 in the House. It's Windows Vista Ultimate 32 bit without service pack. Can I download wallpaper cat Calico of Windows (r) and set it as background? Sincerely,. Numbuh3wearsabutterflycoutume PS I went on the site of Microsof
-
CD/DVD-Rom will not read the CD
I just upgraded from vista to windows 7 Home premium database on my laptop and now my CD-DVD-Rom will not read any CD I put in the drive. He reads that DVD very well so I'm up for a loop now. My drivers are all far better that I can find. I know it's