I have a mac pro I will be able to use my hearing aid resign through it as my phone i 6 more

Similar Questions

• I would like to replace my system disk.  Have a Mac Pro 2010, 4 drive bays

  My system disk is full and I can't put more on it 320.  It is a Mac Pro 2010, with 4-Bay.  I could put a larger capacity drive in one of the other berries, but I don't know how to transfer the info on the old drive to the new.  If I use Migration Asst, it will keep the permissions for music software, etc.?

  Also, I have a Mac Pro 2010 and moved my system from one disk to another. In my case, I moved from 10.7.5 on a drive of 1 GB to 1 Bay for a 512 GB SSD on a map of drive SATA PCIe 2.0 6-Gb/s.

  There are probably several ways to do what you think. However, as I have not used the Apple Migration Assistant personally, I don't think I can answer your question with absolute certainty if it will keep your permissions for music software and so will leave it to someone else who has experience with its use.

  But I can gives you two ways that may be useful: One is if you already want to back up your system using Apple Time Machine drive, you can restore the backup to a new larger drive. The other would be to buy a program to copy such as SuperDuper! ($28) ou Carbon Copy clone ($40) and they can clone your drive system on a new drive. I've built a number of backup copies (10.7.5, 10.8, 10.10) for different purposes (development, experimentation, downsizing to re - purpose a 1 or 2 GB drive for something else...) With a Mac Pro and 4 Bay, you have a lot of flexibility.

  Hope that helps.

• I have a mac pro 3.1. How can I transfer the system to a new and bigger drive?

  I have a mac pro 3.1. How can I transfer the system to a new and bigger drive? The old drive is much too small.

  I'm not familiar with your model computer, but there are several ways to do so.  If the computer can accommodate multiple disks, you can install the new drive next to the former.  If she does not accept another disk, you can in these external adapters for about $30, which allow you to attach a bare drive to a computer with USB.  Then, you clone the internal drive to the new. Cloning is a special form of the copy.  It copies all files including startup system files so that your new drive is essentially identical to the first.

  Double clone - http://www.bombich.com/software/ccc.html

  SuperDuper - http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html (shareware)

  IBackup - http://www.grapefruit.ch/iBackup/index.html (free)

  The restore function of disk utility included in directions of OS X. alarm - http://discussions.apple.com/message/8799711#8799711 (a former post but can still work).

  Clone the old drive to the new, then install a new one.

• I have a mac Pro 13 "model and its making funny nose and get hot around 11:00 area when she is facing you. sounds like wearing out but it happens only intermittently.

  I have a mac Pro 13 "model and its making funny nose and get hot around 11:00 area when she is facing you. sounds like wearing out but it happens only intermittently.

  The genius bar people are especially good to physical problems and power problems. MacBook Pro my son got in because he was behaving strangely, and I run diagnostic and written tests the error code.

  The genius powered on the MacBook, made a terrible face, picked up over his head and held the keyboard close to his ear. "You have bad fan!", he said. "And you have also run diagnostics and got an error code? What was this error code? »

  The error code has turned out to be basically "Bad fan".

  Your visit for assessment is free, guaranteed, or rear. If you decide to do the work, it's all fixed-price, no surprises.

• I will be able to use the pqservice partition after I have re-installed windows?

  Hello
  PC - Acer aod270.
  It had windows 7 installed starter.
  I reinstalled windows 7 Professional. I installed it on drive C. I left the pqservice partition and partition system (100 MB) only, has not formatted or anything.

  My pqservice partition will be usable, or should I reinstall windows professional still and everything to not have space unusable format?...

  Hi batusia

  If you leave the PQservice partition intact, then you will be able to use it if you want to restore Windows 7 Starter to your PC.

  If you erase the partition, then no, he will not be able to be used.

  If you need additional disk space, make sure you do recovery disks/USB key beforehand, so if you want, you can reinstall Windows 7 Starter.

• I always use Macromedia Dreamweaver 4 for my Web site. The new CC Dreamweaver will be able to use the old traced or will I have to start over?

  I always use Macromedia Dreamweaver 4 for my Web site. The new CC Dreamweaver will be able to use the old traced or will I have to start over?

  CC of Dreamweaver is capable of handling any HTML page, regardless of where it was created. However, you might find that your existing code is not valid (it depends on how good your understanding of HTML is).

  Download the demo version and see how you rate. However, you should be warned that Dreamweaver CC is very different from DW 4.

• The new MacBook with touch of force will be able to use the pencil to Apple?

  The new MacBook with Force Touch will be able to use the pencil to Apple?

  N ° of Apple pencil only works with iPad Pro (the iPad Pro is sold in two sizes).

  Use the pencil to Apple with iPad Pro - Apple Support

• My CST Studio 32-bit software will be able to use the 8 GB of RAM?

  I have 64 bit windows os and my CST Studio software is 32-bit.

  My s/w will be able to use 8 GB of RAM

  Original title: useage 64bits

  If she needs as much RAM, it will be able to use it.

  The question about the system RAM and 64-bit OS is the ability of the operating system to use more

  only 4 GB of RAM. A 64 bit OS has no direct impact on software use RAM.

  ,

• I changed my ISP from at & t to time warner cable, I will be able to use firefox in the same way?

  I will be able to use Firefox in the same way after I change my ISP from at & t to time warner cable?

  NoScript is essential. Windows 7 firewall is good. For antivirus, etc., I'm under maximum security from Trend Micro. The price is high, but it usually substantial discounts are available. Some ISPs now offer free versions of Norton or other software, but I don't know about Time Warner.

• I want to use the Google toolbar. I installed of FF7. I will be able to use the toolbar again if I go back to FF4? If so, how to do that.

  I want to use the Google toolbar. I installed of FF7. I will be able to use the toolbar again if I go back to FF4? If so, how to do that.

  If my post has solved your problem, please click the 'Solved It' button next to my first post.

• If I buy the iphone free sim 6s I will be able to use it with my simple mobile operator?

  If I buy the iphone free sim 6s I will be able to use it with my simple mobile operator?

  If you buy directly from Apple online or at an Apple store, it will work with any supported media. Just call the carrier and ask them if they support iPhones.

• Is it possible to update the first pro and still be able to use the projects of the old version

  Is it possible to update the first pro and still be able to use the projects of the old version

  You can open projects from versions with Premiere Pro, Yes. But I agree with Bob - make a copy of the project and open the copy. You won't be "up the Creek" if something goes wrong.

• Mac Pro (2013) will not wake up from sleep after that put 10.11.2 up-to-date

  Problem:

  After that Mac Pro goes to sleep, keyboard and mouse enter don't wake him. Disconnect and reconnect the monitor will not help either. Unplug the monitor wouldn't be helped either. Hotkeys to stop will not help either. (I use Mac since 1986, so I know more tricks). The only thing I can do to start to use my Mac is again holding down the button of physical power for five seconds and make a hard stop.

  Background:

  It is a problem that sometimes in the past. However, it is not reproducible and usually one of the steps above might work, such that unplug the monitor (a Dell 4 K 27 ") of the power supply and then plugging.

  I use physically connected (USB) keyboard and mouse.

  Current state:

  After the 10.11.2 system update last night, my Mac Pro shows this problem every time he sleeps.

  He has already hit a critical delivery photography and currently affects a submission of work for the city.

  This is urgent.

  Other users have reported the same problem after 10.11.2. I've not seen a solution

• Mac Pro 2009 will not start, no edge

  On Thursday, June 16, I sat to use my Mac Pro early 2009. I noticed that my Mac would not wake up by mouse click or the SPACEBAR on the keyboard. The led on my Mac, so I immediately thought that it was a problem with the graphics card.

  I force shut down the Mac by holding the power button. I waited 10 seconds and turned on my Mac back, everything was fine and I worked on my Mac for 3 hours.

  Last night 18 June I sat watching television when I heard the ringtone on my Mac Pro, I realized was a reboot. I went to the wire and connected and everything seemed fine. However later in the evening, I noticed a flashing LED on one of my two monitors. Once the Mac was on (fans spinning) but no signal to the monitor.

  I made another force off now the power button on Mac, but now when turn on the Mac there is no boot chime or control signal.

  I upgraded the graphics card to an AMD Radeon Sapphire HD 7950 in April 2013.

  Any advice would be much appreciated as I'm in the middle of a big project.

  Could also be a Mac Pro RAM chip inyour failure, sounds almost identical to a question I've had recently, I found the missing question when I removed the memory card.

  If one of the pair of cards, you will need to remove two cards.

  Try taking the memory OUT n test each module one at a time. Also check RAM editing maps, if none of the four lights on the two cards is turned on it idicates a defective module.

• My Mac Pro 2013 will sleep is no longer

  A month or there is my Mac Pro 2013 is no longer sleeps, even if I try to sleep it manually. I have enabled and changed the setting of Sleep/Power Nap in energy-saving.

  I looked at the article Apple and that did not help. I have reset the SMC and booted without failure. I haven't changed any connected equipment or internal. The console log does not help me, but here's the most recent when I sleep manually it. I have bolded the line that started the sleep/low power mode and the line where it was released

  20/05/16 2:00:42.429 PM CommCenter [435]: CSI telling to go to low power.

  20/05/16 2:00:42.429 PM AirPlayUIAgent [588]: 2016-05-20 02:00:42.428658 PM [AirPlayUIAgent] BecomingInactive: NSWorkspaceWillSleepNotification

  20/05/16 com.apple.cts [430 2:00:42.431 PM]: com.apple.suggestions.harvest: scheduler_evaluate_activity told me to run this job. However, but the start is no time for 33136 seconds.  Ignorant.

  20/05/16 com.apple.cts [430 2:00:42.431 PM]: com.apple.icloud.fmfd.heartbeat: scheduler_evaluate_activity told me to run this job. However, but the start is no time for 468717 seconds.  Ignorant.

  20/05/16 2:00:42.435 PM sharingd [469]: 14:00:42.435: scan BTLE turned off

  20/05/16 2:00:42.435 PM sharingd [469]: 14:00:42.435: scan BTLE turned off

  20/05/16 2:00:42.567 PM identityservicesd [442]: IMMacNotificationCenterManager: 0x7ff29b548b80 >: Observer of notification: notification com.apple.iChat: __CFNotification 0x7ff29d120e10 {name = _NSDoNotDisturbEnabledNotification}

  20/05/16 2:00:42.567 PM image [497]: IMMacNotificationCenterManager: 0x7ff2339135f0 >: Observer of notification: notification com.apple.FaceTime: __CFNotification 0x7ff2327077c0 {name = _NSDoNotDisturbEnabledNotification}

  20/05/16 2:00:42.588 PM identityservicesd [442]: IMMacNotificationCenterManager: 0x7ff29b548b80 >: NC disabled: NO

  20/05/16 2:00:42.588 PM image [497]: IMMacNotificationCenterManager: 0x7ff2339135f0 >: NC disabled: NO

  20/05/16 2:00:42.588 PM sharingd [469]: 14:00:42.588: purged hashes contact

  20/05/16 2:00:42.589 PM sharingd [469]: 14:00:42.588: discoverable mode changed to Off

  20/05/16 2:00:42.589 PM sharingd [469]: 14:00:42.588: Scan stopped BTLE

  20/05/16 2:00:42.598 PM WindowServer [180]: device_generate_desktop_screenshot: authw 0x7ff54a014c00 (2000), shield 0x7ff54d055c00 (2001)

  20/05/16 2:00:42.598 PM WindowServer [180]: device_generate_lock_screen_screenshot: authw 0x7ff54a014c00 (2000) [0, 0, 0, 0] shield 0x7ff54d055c00 (2001), dev [1920,1080]

  20/05/16 2:00:42.598 PM WindowServer [180]: no sleep for WillPowerOffWithImages image

  20/05/16 2:00:42.599 PM WindowServer [180]: device_generate_desktop_screenshot: authw 0x7ff54a014c00 (2000), shield 0x7ff54d055c00 (2001)

  20/05/16 2:00:42.599 PM WindowServer [180]: no sleep for WillPowerOffWithImages image

  20/05/16 2:00:42.602 PM image [497]: IMMacNotificationCenterManager: 0x7ff2339135f0 >: DND enabled: YES

  20/05/16 2:00:42.602 PM identityservicesd [442]: IMMacNotificationCenterManager: 0x7ff29b548b80 >: DND enabled: YES

  20/05/16 2:00:42.602 PM image [497]: IMMacNotificationCenterManager: 0x7ff2339135f0 >: update enabled: No. (subjects: ())

  ))

  20/05/16 2:00:42.602 PM identityservicesd [442]: IMMacNotificationCenterManager: 0x7ff29b548b80 >: update enabled: No. (subjects: ())

  ))

  20/05/16 2:00:48.000 PM kernel [0]: IOUSBHostHIDDevice@00223000,0 074948.944989: IOUSBHostHIDDevice::interruptRetry: resetting the device due to failures of IO

  20/05/16 2:00:48.000 PM kernel [0]: USB device 0BDA030700640000 - fConsecutiveResetCount = 1.

  20/05/16 2:00:48.000 PM kernel [0]: USB device 0BDA030700640000 - PortLogging (Disable) = kIOReturnNotReady.

  20/05/16 2:00:49.000 PM kernel [0]: en2: BSSID changed to 48:f8:b3: this: e7:3 c

  20/05/16 2:00:49.000 PM kernel [0]: en2: channel changed to 161,80

  20/05/16 2:00:49.000 PM kernel [0]: IO80211AWDLPeerManager::setAwdlOperatingMode setting the AWDL SUSPENDED auto operating mode

  20/05/16 2:00:49.000 PM kernel [0]: IO80211AWDLPeerManager::setAwdlSuspendedMode() suspension AWDL, enterQuietMode (true)

  20/05/16 2:00:49.000 PM kernel [0]: Airport: RSN full on en2 handshake

  20/05/16 2:00:49.000 PM kernel [0]: IO80211AWDLPeerManager::setAwdlOperatingMode setting the AWDL of SUSPENSION auto operating mode

  20/05/16 2:00:49.000 PM kernel [0]: IO80211AWDLPeerManager::setAwdlAutoMode AWDL recovery

  20/05/16 2:00:49.000 PM kernel [0]: ARPT: 74949.082534: wl0: roamed or channel switching, #0, bssid 48:f8:b3 reason: this: e7:3 c, last RSSI-65

  20/05/16 2:00:49.000 PM kernel [0]: en2: BSSID changed to 48:f8:b3: this: e7:3 c

  20/05/16 2:00:49.000 PM kernel [0]: en2: channel changed to 161,80

  20/05/16 2:00:49.000 PM kernel [0]: changed en2::IO80211Interface:postMessage bssid

  20/05/16 2:00:49.000 PM kernel [0]: AppleUSB20Hub@00220000 074949.251405: AppleUSBHub::deviceRequest: reset because of persistent errors

  20/05/16 2:00:49.221 PM Google Chrome [443]: [14:00:49.221] < < < < AVCaptureHALDevice > > > >-[AVCaptureHALDevice _removePropertyListeners]: removing an observer living device < AVCaptureHALDevice: 0x7fc08348d880 [Yeti Stereo Microphone] [AppleUSBAudioEngine:Blue Microphones: Yeti stereo Microphone: 210000:2, 1] > has failed (560947818)

  20/05/16 2:00:49.221 PM Google Chrome [443]: [14:00:49.221] < < < < AVCaptureHALDevice > > > >-[AVCaptureHALDevice _removePropertyListeners]: removing observer device format < AVCaptureHALDevice: 0x7fc08348d880 [Yeti Stereo Microphone] [AppleUSBAudioEngine:Blue Microphones: Yeti stereo Microphone: 210000:2, 1] > has failed (560947818)

  20/05/16 2:00:49.221 PM Google Chrome [443]: [14:00:49.221] < < < < AVCaptureHALDevice > > > >-[AVCaptureHALDevice _removePropertyListeners]: remove observer data source for device < AVCaptureHALDevice: 0x7fc08348d880 [Yeti Stereo Microphone] [AppleUSBAudioEngine:Blue Microphones: Yeti stereo Microphone: 210000:2, 1] > has failed (560947818)

  20/05/16 2:00:49.221 PM Google Chrome [443]: [14:00:49.221] < < < < AVCaptureHALDevice > > > >-[AVCaptureHALDevice _removePropertyListeners]: removal of observer source of the device data < AVCaptureHALDevice: 0x7fc08348d880 [Yeti Stereo Microphone] [AppleUSBAudioEngine:Blue Microphones: Yeti stereo Microphone: 210000:2, 1] > has failed (560947818)

  20/05/16 2:00:52.429 PM loginwindow [102]: CoreAnimation: attention, removed the wire with CATransaction uncommitted; Set CA_DEBUG_TRANSACTIONS = 1 in the environment connect backtrace.

  20/05/16 2:00:52.479 PM loginwindow [102]: CoreAnimation: attention, removed the wire with CATransaction uncommitted; Set CA_DEBUG_TRANSACTIONS = 1 in the environment connect backtrace.

  20/05/16 2:01:10.304 PM CommCenter [435]: CSI by saying to the low power output.

  20/05/16 2:01:10.308 PM loginwindow [102]: ERROR | -[LWBuiltInScreenLockAuthLion closeAuthAndReset:] | Attempted to remove an observer by observing

  Hello..

  Sorry to hear that your Mac Pro is upward...

  If you have not yet tried, Reset NVRAM on your Mac.