Mac Pro (2013) will not wake up from sleep after that put 10.11.2 up-to-date

Similar Questions

• computer will not wake up from sleep or hybernation HP Dv9000

  Hi, I have a laptop HP Dv9000 which came into hybernation mode and I can't wake him up.  I tried restarting several times, with and without the battery installed, press the power button, try control alt del and other things without success.  Any ideas?  The laptop is also under Vista.

  Thank you.

  Hi jagarner,

  1. what happens when you restart the laptop?

  2. are you able to see the computer manufacturer's logo when you try to restart the laptop?

  I suggest that you do power off the laptop and check.

  (a) turn off the laptop and then remove the battery.

  (b) do not connect the main power, press and hold the power button for 20 seconds to discharge static electricity.

  (c) then reconnect the battery and start the laptop

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My Mac Pro 2013 will sleep is no longer

  A month or there is my Mac Pro 2013 is no longer sleeps, even if I try to sleep it manually. I have enabled and changed the setting of Sleep/Power Nap in energy-saving.

  I looked at the article Apple and that did not help. I have reset the SMC and booted without failure. I haven't changed any connected equipment or internal. The console log does not help me, but here's the most recent when I sleep manually it. I have bolded the line that started the sleep/low power mode and the line where it was released

  20/05/16 2:00:42.429 PM CommCenter [435]: CSI telling to go to low power.

  20/05/16 2:00:42.429 PM AirPlayUIAgent [588]: 2016-05-20 02:00:42.428658 PM [AirPlayUIAgent] BecomingInactive: NSWorkspaceWillSleepNotification

  20/05/16 com.apple.cts [430 2:00:42.431 PM]: com.apple.suggestions.harvest: scheduler_evaluate_activity told me to run this job. However, but the start is no time for 33136 seconds.  Ignorant.

  20/05/16 com.apple.cts [430 2:00:42.431 PM]: com.apple.icloud.fmfd.heartbeat: scheduler_evaluate_activity told me to run this job. However, but the start is no time for 468717 seconds.  Ignorant.

  20/05/16 2:00:42.435 PM sharingd [469]: 14:00:42.435: scan BTLE turned off

  20/05/16 2:00:42.435 PM sharingd [469]: 14:00:42.435: scan BTLE turned off

  20/05/16 2:00:42.567 PM identityservicesd [442]: IMMacNotificationCenterManager: 0x7ff29b548b80 >: Observer of notification: notification com.apple.iChat: __CFNotification 0x7ff29d120e10 {name = _NSDoNotDisturbEnabledNotification}

  20/05/16 2:00:42.567 PM image [497]: IMMacNotificationCenterManager: 0x7ff2339135f0 >: Observer of notification: notification com.apple.FaceTime: __CFNotification 0x7ff2327077c0 {name = _NSDoNotDisturbEnabledNotification}

  20/05/16 2:00:42.588 PM identityservicesd [442]: IMMacNotificationCenterManager: 0x7ff29b548b80 >: NC disabled: NO

  20/05/16 2:00:42.588 PM image [497]: IMMacNotificationCenterManager: 0x7ff2339135f0 >: NC disabled: NO

  20/05/16 2:00:42.588 PM sharingd [469]: 14:00:42.588: purged hashes contact

  20/05/16 2:00:42.589 PM sharingd [469]: 14:00:42.588: discoverable mode changed to Off

  20/05/16 2:00:42.589 PM sharingd [469]: 14:00:42.588: Scan stopped BTLE

  20/05/16 2:00:42.598 PM WindowServer [180]: device_generate_desktop_screenshot: authw 0x7ff54a014c00 (2000), shield 0x7ff54d055c00 (2001)

  20/05/16 2:00:42.598 PM WindowServer [180]: device_generate_lock_screen_screenshot: authw 0x7ff54a014c00 (2000) [0, 0, 0, 0] shield 0x7ff54d055c00 (2001), dev [1920,1080]

  20/05/16 2:00:42.598 PM WindowServer [180]: no sleep for WillPowerOffWithImages image

  20/05/16 2:00:42.599 PM WindowServer [180]: device_generate_desktop_screenshot: authw 0x7ff54a014c00 (2000), shield 0x7ff54d055c00 (2001)

  20/05/16 2:00:42.599 PM WindowServer [180]: no sleep for WillPowerOffWithImages image

  20/05/16 2:00:42.602 PM image [497]: IMMacNotificationCenterManager: 0x7ff2339135f0 >: DND enabled: YES

  20/05/16 2:00:42.602 PM identityservicesd [442]: IMMacNotificationCenterManager: 0x7ff29b548b80 >: DND enabled: YES

  20/05/16 2:00:42.602 PM image [497]: IMMacNotificationCenterManager: 0x7ff2339135f0 >: update enabled: No. (subjects: ())

  ))

  20/05/16 2:00:42.602 PM identityservicesd [442]: IMMacNotificationCenterManager: 0x7ff29b548b80 >: update enabled: No. (subjects: ())

  ))

  20/05/16 2:00:48.000 PM kernel [0]: IOUSBHostHIDDevice@00223000,0 074948.944989: IOUSBHostHIDDevice::interruptRetry: resetting the device due to failures of IO

  20/05/16 2:00:48.000 PM kernel [0]: USB device 0BDA030700640000 - fConsecutiveResetCount = 1.

  20/05/16 2:00:48.000 PM kernel [0]: USB device 0BDA030700640000 - PortLogging (Disable) = kIOReturnNotReady.

  20/05/16 2:00:49.000 PM kernel [0]: en2: BSSID changed to 48:f8:b3: this: e7:3 c

  20/05/16 2:00:49.000 PM kernel [0]: en2: channel changed to 161,80

  20/05/16 2:00:49.000 PM kernel [0]: IO80211AWDLPeerManager::setAwdlOperatingMode setting the AWDL SUSPENDED auto operating mode

  20/05/16 2:00:49.000 PM kernel [0]: IO80211AWDLPeerManager::setAwdlSuspendedMode() suspension AWDL, enterQuietMode (true)

  20/05/16 2:00:49.000 PM kernel [0]: Airport: RSN full on en2 handshake

  20/05/16 2:00:49.000 PM kernel [0]: IO80211AWDLPeerManager::setAwdlOperatingMode setting the AWDL of SUSPENSION auto operating mode

  20/05/16 2:00:49.000 PM kernel [0]: IO80211AWDLPeerManager::setAwdlAutoMode AWDL recovery

  20/05/16 2:00:49.000 PM kernel [0]: ARPT: 74949.082534: wl0: roamed or channel switching, #0, bssid 48:f8:b3 reason: this: e7:3 c, last RSSI-65

  20/05/16 2:00:49.000 PM kernel [0]: en2: BSSID changed to 48:f8:b3: this: e7:3 c

  20/05/16 2:00:49.000 PM kernel [0]: en2: channel changed to 161,80

  20/05/16 2:00:49.000 PM kernel [0]: changed en2::IO80211Interface:postMessage bssid

  20/05/16 2:00:49.000 PM kernel [0]: AppleUSB20Hub@00220000 074949.251405: AppleUSBHub::deviceRequest: reset because of persistent errors

  20/05/16 2:00:49.221 PM Google Chrome [443]: [14:00:49.221] < < < < AVCaptureHALDevice > > > >-[AVCaptureHALDevice _removePropertyListeners]: removing an observer living device < AVCaptureHALDevice: 0x7fc08348d880 [Yeti Stereo Microphone] [AppleUSBAudioEngine:Blue Microphones: Yeti stereo Microphone: 210000:2, 1] > has failed (560947818)

  20/05/16 2:00:49.221 PM Google Chrome [443]: [14:00:49.221] < < < < AVCaptureHALDevice > > > >-[AVCaptureHALDevice _removePropertyListeners]: removing observer device format < AVCaptureHALDevice: 0x7fc08348d880 [Yeti Stereo Microphone] [AppleUSBAudioEngine:Blue Microphones: Yeti stereo Microphone: 210000:2, 1] > has failed (560947818)

  20/05/16 2:00:49.221 PM Google Chrome [443]: [14:00:49.221] < < < < AVCaptureHALDevice > > > >-[AVCaptureHALDevice _removePropertyListeners]: remove observer data source for device < AVCaptureHALDevice: 0x7fc08348d880 [Yeti Stereo Microphone] [AppleUSBAudioEngine:Blue Microphones: Yeti stereo Microphone: 210000:2, 1] > has failed (560947818)

  20/05/16 2:00:49.221 PM Google Chrome [443]: [14:00:49.221] < < < < AVCaptureHALDevice > > > >-[AVCaptureHALDevice _removePropertyListeners]: removal of observer source of the device data < AVCaptureHALDevice: 0x7fc08348d880 [Yeti Stereo Microphone] [AppleUSBAudioEngine:Blue Microphones: Yeti stereo Microphone: 210000:2, 1] > has failed (560947818)

  20/05/16 2:00:52.429 PM loginwindow [102]: CoreAnimation: attention, removed the wire with CATransaction uncommitted; Set CA_DEBUG_TRANSACTIONS = 1 in the environment connect backtrace.

  20/05/16 2:00:52.479 PM loginwindow [102]: CoreAnimation: attention, removed the wire with CATransaction uncommitted; Set CA_DEBUG_TRANSACTIONS = 1 in the environment connect backtrace.

  20/05/16 2:01:10.304 PM CommCenter [435]: CSI by saying to the low power output.

  20/05/16 2:01:10.308 PM loginwindow [102]: ERROR | -[LWBuiltInScreenLockAuthLion closeAuthAndReset:] | Attempted to remove an observer by observing

  Hello..

  Sorry to hear that your Mac Pro is upward...

  If you have not yet tried, Reset NVRAM on your Mac.

• OfficeJet pro more than 8600 wake up from sleep problem

  My officejet Pro Plus 8600 not wake when looks like it went into mode 'sleep' (power LED flashes slowly). I'm unable to print, use the touch screen or off without unplugging it to reset. Then, he repeats the cycle. I use Windows 7 and network through a Verizon MiFi.

  I've deleted and reinstalled my printer and driver/software using the CD that came with it and I think that the "unable to wake" problem has been resolved. Hope it helps someone else.

• Mac Pro 2009 will not start, no edge

  On Thursday, June 16, I sat to use my Mac Pro early 2009. I noticed that my Mac would not wake up by mouse click or the SPACEBAR on the keyboard. The led on my Mac, so I immediately thought that it was a problem with the graphics card.

  I force shut down the Mac by holding the power button. I waited 10 seconds and turned on my Mac back, everything was fine and I worked on my Mac for 3 hours.

  Last night 18 June I sat watching television when I heard the ringtone on my Mac Pro, I realized was a reboot. I went to the wire and connected and everything seemed fine. However later in the evening, I noticed a flashing LED on one of my two monitors. Once the Mac was on (fans spinning) but no signal to the monitor.

  I made another force off now the power button on Mac, but now when turn on the Mac there is no boot chime or control signal.

  I upgraded the graphics card to an AMD Radeon Sapphire HD 7950 in April 2013.

  Any advice would be much appreciated as I'm in the middle of a big project.

  Could also be a Mac Pro RAM chip inyour failure, sounds almost identical to a question I've had recently, I found the missing question when I removed the memory card.

  If one of the pair of cards, you will need to remove two cards.

  Try taking the memory OUT n test each module one at a time. Also check RAM editing maps, if none of the four lights on the two cards is turned on it idicates a defective module.

• Mac Pro 2013 does not connect to the hard G technology drive

  Hello

  I recently bought a Mac Pro and I am trying to transfer files from my hard drive mini 1 TB of G technology itself. The files came from a backup who was recently transferred to my 2011 macbook pro. I tried using cord USB 3.0 for the Mac Pro doesn't have a firewire plugs, but it does not recognize my hard drive. The hard drive is not showing any signs of work because I don't hear the fans turn on the player. The hard drive connects perfectly to my macbook pro via firewire, so should I buy a bolt of lightning for this firewire adapter? I really hope that I don't need to buy a new external, but I'd love to hear a few options for this issue, it would be greatly appreciated.

  Best regards

  May be that the USB port does not provide enough power. Sabrina drve is provided with a plug that allows to connect a plug to an AC wall power supply.

  The manual

  http://www.g-technology.com/sites/default/files/fields/field_files_pdf/product/g-drive_mini_3.0_usermanual_r3_1015.PDF

  Neither the Web site

  ve http://www.g-Technology.com/Products/g-Drive-Mini-1-TB-External-Desktop-Hard-DRI

  give the voltage of power

  It works via the USB port on your MacBook? The USB part is maybe defective.

• After the migration to the new Mac Pro Dreamweaver will not launch, said missing menus.xml file. How to solve this?

  After migrating to a new Mac Pro Dreamweaver CS6 launch. It is said that missing menus.xml file. How to solve this?

  Hi rustyg12,

  Go to/Applications/Adobe Dreamweaver CS6/Configuration/Menus/menus.bak

  You will see a menus.xml file here - it is a backup copy of the actual menus.xml file that uses DW.

  Copy it from this folder, paste 1 level above (in the file menu).

  Launch DW. See if it works.

• Presario CQ56-115DX: cq56-115dx windows 10 not wake up from sleep mode

  My CQ56-115DX upgrade Windows 10 fine and for ovaer a week is fine.  And then after a few updates wonderful Microsofts that he wakes up mode not sleep.  Tried to remove the battery, F8, repeated restarts, insert in WIN 7 recovery disk and even the original hard drive hoping that it would get better.  He did not.

  I'm afraid that the BIOS is damaged.  How can I change the BIOS when the machine will do nothing other than the without wire lights up red, cap lock flashes blue and the cd drive growls but does not start the disk in it?    I've used up all my tricks and need for a new approach.

  Does anyone have any ideas?

  I had once with a different system and it is solved with a hard reset.   First, remove the battery and unplug the power plug.  Press and hold the power button for 30 seconds. Reconnect to the electrical network (leave the battery for the time) and press the power button.   Windows should now start normally...

• Windows does not wake up from sleep/hibernate implementation using the mouse button, doesn't work by using the Start button

  Windows used to wake from sleep with the return key or the mouse, now needs to press the Start button on the desktop every time.  I have not changed anything.

  that's happened?   can anyone help?

  Please click the Start button, type security in the search field and then click on "check the status of security" in the list.

  What do you see? make a screenshot of it + post here.

  For example, I have Microsoft Security Essentials and I see:

  

  What do you see when you click on "View installed antispyware programs? Make a screenshot + post.

  For example, I see:

  

  How to include a screenshot, see: http://answers.microsoft.com/en-us/windows/wiki/windows_other-windows_programs/how-to-include-a-screenshot-in-your-post/2594b08e-32a3-476a-85a6-b021181be7e4

  What is the exact name of your Bullguard product?

  Please try to be as specific as possible in your answers, right? :-)

• Windows 8 will not wake up mode 'sleep'

  I have a Dell desktop with Windows 8 and he will wake up sleep mode, if it isn't being used for awhile but if left for a long time he goes to sleep and won't wake up. I tried to turn it back on

  • touch mouse
  • touch the power button / stop
  • using the windows key + C
  • no result except if I make a strong power down

  Now, he has started to download windows updates without installing

  The best that I have saved for the end... It will not cut down, it will only in power saving mode

  very frustrating... suggestions please?

  Was given this same problem and I fixed it.  Check to make sure that she is not actually wake up!  In my case was wake the computer itself, but the graphics card was not.  I could hear the processor fan back, hard disks turn upward, but nothing on my screen.  In my BIOS, there is an option to do not allow the built-in graphics adapter sleep.  It was called "RC6 make Standby" and I turned it off - fixed!

• Why MSN Messenger will not charge my e-mail after that I upgraded to 13.0

  I'm used to be able to use MSN Messenger from my Inbox very well until firefox put to 13.0 update I have no why, but now it will not load. It works very well on Internet Explorer, but not firefox after I upgraded and I don't want to use internet explore so if someone can help I would appreciate it a lot, any help is welcome. Thank you.

  There is a bug with MSN Messenger, caused by the use of globalStorage longer supported in Firefox 13 +.
  Hotmail support has been notified on this issue and is working on a fix.

  • bug 762170 - Windows Messenger does not load in hotmail.com

  (Please, don't comment in bug reports)

• Lenovo L420 wakes up from sleep after upgraded to Windows 8

  I have a Lenovo Thinkpad L420, which I have recently upgraded to Windows 8 (it was purchased with Windows 7 installed).  Now, the computer will be no wake mode 'sleep', I need to restart everytime I try to wake up from its sleep.

  Hi all, thought I'd post an update. As MadsDad said, Yes, there is a new BIOS that resolves this problem. I finally got a blockage of an engineer at Lenovo and we worked together to build the new BIOS. This update solves also sporadic freezing problems than some models also known. Its here
  http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS013626

• iMac 27 "mid-2011 does not start after that put 10.11.3 up-to-date.

  Hello
  

  
  

  Problem:

  After you have decided my iMac demanded a critical software update, I've updated from El Capitan 10.11 to 10.11.3 today. From restarting after the update has been downloaded, computer crashes just after the start progress bar appears and begins to charge to the top.

  He took a VERY long time to start correctly. And when I say a long time, I mean ALL DAY. Literally more than 8 hours. The progress bar is completed later, and after I expected the Mac starts in the login screen, it simply not and just sitting there, with a full load until the progress bar and the Apple logo.

  Nothing happened.

  What I've tried so far:

  • Reset the PRAM
  • Start in disk utility to perform first aid. Saying that the hard drive is fine and functional results.
  • Reset SMC
  • Impossible for some reason in Mode safe start?

  What I am NOT prepared to do:

  • Reinstall a fresh OS X
  • Pay for it (I don't see how it's my fault, or that I should pay for it be repaired)
  • Extremely sensitive data loss

  I'm absolutely about to lose my mind with this problem. How an update can destroy just a machine?

  Someone has ideas on how else to go about fixing this?

  I have been updated! This is pure madness!

  Yours in disappointment,

  W

  • Reinstall a fresh OS X - is perhaps not necessary.
  • Pay for it (I don't see how it's my fault, or that I should pay for it be repaired), it's your fault in a way, but you don't have to pay to fix.
  • Extremely sensitive data - loss if you kept backups that would not be a concern.

  Try this:

  Start the computer in Safe Mode, and then restart normally. It will be slower than a normal startup.

  MacIntel: Reset of the controller (SMC) system management

  Reset the PRAM and NVRAM on your Mac.

  Repair the hard drive and permissions - El Capitan

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears.

  Repair

  When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left.  Click the first aid tab in the toolbar... If disk utility reports any errors that have been corrected, then re-run first aid until no errors are reported. Wait until the operation is complete, then quit disk utility and return to the main menu. Select restart from the Apple menu.

  Now, download and reinstall OS X El Capitan 10.11.3 Combo Update.

• Qosmio F20 with Vista: display is not wake up from sleep/standby

  I hope someone can stop pulling my hair out - please!
  I have a Qosmio f20-136 that I upgraded to 2 GB of RAM. I managed to install Ultimate Visa on what actually works very well. I get a score of 3.4 Visa which means Aero works very well. The lowest score of void is actually the CPU (the 1.6 GHz Pentium M) with following 3D graphics to 3.9 with the Geforce Go 6600.

  However, I have an annoying problem.
  Hibernate works very well - he hibernates and returned very well. I have the power button set for the Hibernate now and also in the start menu power button.
  If I close the lid it goes to sleep and when I opened the lid it picks up perfectly. There is the sound of a device connection / disconnection when I open and close the lid.

  However, here's the problem. I would like to use the power button to sleep rather than hibernation and I don't want to wear and tear on the hinges of the screen by keep opening and closing the lid. So, I tried to set the power button to sleep and also tried selecting sleep in the start menu options. In both cases, the machine goes to sleep but then a problem when I try to resume.

  The powers of the machine upward but the screen is black. Everything is alive, but I don't see anything.
  If I unplug the power cable and plug again (which changes the brightness of the screen), then it comes to life. If I close and re - open the lid, it comes to life. Nothing else he raises.

  Some would say that I'm picky because I'm almost there with vista, but I dearly would solve this issue. Can anyone help please.

  Currently using the video driver 97.52. I installed the added G30 package (without the energy control) that works. FN buttons not working (although the multimedia keys - if anyone has a solution for that I wouldn't be thrilled!.) I tried support button for the G30 but does not work).

  Please help if you can.
  Concerning
  Jules

  Hello

  Try to install Nvidia Driver 156.72

  from there: -.

  http://www.laptopvideo2go.com/forum/index.php?showtopic=15580

  Good luck

• Satellite Pro L10 will not start - green turns off after 3 seconds

  Hello

  Having a L10 (PSL15E-01J018EN) and when you press the button, the led ON / STANDBY on the front lights up green for about 3 seconds and then past off the coast. It accomplishes this task for the sector or on battery and there is no other life. Anyone know what may be the problem?

  Thank you

  Melv

  Hello Melv

  Remove the battery, connect your laptop to the power adapter only and try to turn on the L10. If this lets wait a few minutes and put the battery in place and watch if the laptop works as usual.

  Please let us know exactly what is happening.