I have a xp system and my friend installed with a password, I can't reach him is there anyway I can get past this issue?

Similar Questions

• I have an SMU-5672 and capture the baseband on an oscilloscope. Can I do this?

  I have a generator of signals Vectoriels SMU-5672 and to capture the baseband with a reach to compare synchronization with my receiver (HAD).  I would like to connect a scope to the SMU-5442, but don't know if that problem.  Of course, I am particularly concerned by damaging the material.  This method would be the ideal way to check my timing of answer, but if you can't, I'm open to other suggestions.

  Yes, you can do it.  The device driver 5672 configures the 5442 for use is the direct path.  Direct tension max is 1 Vpp into 50 Ohm, 2 Vpp scope in high impedance, so make sure that your scope is put in place for this.

  Continue to use the 5672 as usual, but with your scope related to the CH 5442 0 output.  Assuming that the scope leads his entry (should not), there is no concern damaging the 5610 or 5442 by doing this.

  Unless split you the signal (not what I say), you won't get a signal off the 5610.  It is not clear how you planned to compare the signal for synchronization with your DUT.  No signal can be OK if you compare the time vs a trigger digital, may be exported from the 5442.  Be aware, however, that IF IN addition to RF Out 5610 is about 1.2 US.

  Also note that if you set NIRFSG_ATTR_COMPENSATE_FOR_FILTER_GROUP_DELAY to true, and a marker on sample output 0 event, event marker will be delayed to address delays in the processing of signal in the 5442 and delay analogue 5610, causing the marker event should be harmonized with the time "sample 0" appears on the RF Out 5610.  This attribute was added after the original version and the default values to false to preserve backward compatibility.

  If you are looking to compare calendar, setting the true Compensate for filter Group delay is actually what I would do rather than split the signal IF Out 5442.  You can check how much are aligned by tuning the 5672 at a fairly low frequency for your bezel measure.  5610 late is dominated by the IF filter, which is independent of the RF frequency.

• I have a XP system and games (solitaire, hearts, cell free and lonely spider) have been removed. Is there a way to reinstall them?

  I have a XP system and games (solitaire, hearts, cell free and lonely spider) have been removed. Is there a way to reinstall them or copy them from another computer?

  Thanks for the help.

  Hi braddavis118,

  ·         How did you remove the games?

  The following article should help recover them.

  How do I add or remove games in Windows XP

• I have formatted my system and windows reloaded. Then, I clicked on it somewhere (do not remember on which/wher) now the systym not to see any how removable storage or don't want even to open a CD I put in...

  I have formatted my system and windows reloaded. Then, I clicked on it somewhere (do not remember on which/wher) now the systym not to see any how removable storage or don't want even to open a CD I put in...

  As you reinstalled just Vistas, you would have a very limited number of Restore Points!

  Try the system restore.

  If this does not work, and you don't know what you were doing, reinstall it again.

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  Mick Murphy - Microsoft partner

• the kingdoms of amalur recnocking game, I installed on my pc windows 7, it won't open in my system and my friends

  the kingdoms of amalur recnocking game, I installed on my pc windows 7, it won't open in my system and my friends

  Hello

  1. what exactly happens when you try to open this game?

  2. you get any error message?

  Check if the game is compatible with Windows 7 from the following link:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/

  If the game is not compatible with Windows 7, then I suggest you to install the game on Windows 7 by choosing the level of compatibility:

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility

  Note: Also I suggest you to check the system requirements with the Publisher of the game.

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• I'm using Adobe Photoshop 5.5 Windows XP & have no. SL. with me. Recently, I changed my Windows 7 operating system and tried on several occasions in compatible mode software is not downloading, is there another medium like patch etc, please suggest me

  I'm using Adobe Photoshop 5.5 Windows XP & have no. SL. with me. Recently, I changed my Windows 7 operating system and tried on several occasions in compatible mode software is not downloading, is there another medium like patch etc, please suggest me to solve the problem.

  as I know he never was a 5.5 ps, but something more old ps cs2 (version 9) is not likely to work on any modern operating system.

  You can use your old computer with them or try and install using compatibility mode or consider an updated version of the ps ($ 10 / month for lr and ps is the plan more economic that includes ps), plans, pricing and membership creative cloud | Adobe Creative Cloud

• I have an iPhone and a MacBook Air 11 '' 6. iPhone 6 syncs and backup icloud. I can access iCloud via the net on MacBook.  The problem is that I can't get the MacBook to sync with iCloud.  How can I do this?  Help, please. Thank you.

  I have an iPhone and a MacBook Air 11 '' 6. iPhone 6 syncs and backup icloud. I can access iCloud via the net on MacBook.  The problem is, I can't get the MacBook to sync with iCloud.  How can I do this?  Help, please. Thank you.

  What, in particular, looking to sync with the Mac iCloud? If you mean things like Contacts, calendars, Notes, etc., then you want to go in under the  system preferences, click the iCloud and connect to iCloud there with your iCloud ID. Then select which items you want to sync'd via iCloud.

  What - what are you trying to do?

  See you soon,.

  GB

• I currently have CS5 on my mac pro book. I just bought an i mac 21 "and you want to download my CS5 on my new imac, and then update the % of CS. How can I do this? Thank you

  I currently have CS5 on my mac pro book. I just bought an i mac 21 "and you want to download my CS5 on my new imac, and then update the % of CS. How can I do this? Thank you

  Hi Robing12544083,

  Please visit: https://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html

  Compatibility: Adobe - Creative Suite 5 Master Collection: System requirements

  I hope this helps.

  Concerning

  Megha Rawat

• I have Adobe Creative Suite 6 Production Premium installed on my desktop. Can I install and activate the same product/serial number on a computer laptop aditional?

  I have Adobe Creative Suite 6 Production Premium installed on my desktop. Can I install and activate the same product/serial number on a computer laptop aditional?

  Yes, as long as the machine meets the system requirements for the software.  Your license allows two active facilities.

• I have an iphone 5s and I would like to know if I can transfer photos to an sd card or a direct external hard drive without mydirect without my computer?

  I have an iPhone 5s and I would like to know if I can transfer photos to an sd card or an external hard drive with the help of my computer

  Try a USB port like this:

  https://www.SanDisk.com/home/mobile-device-storage/ixpand

• I have an iPhone 6 and use Verizon as my server. How can I increase the number of rings until it goes to voicemail?

  I have an iPhone 6 and use Verizon as my server. How can I increase the number of rings until it go to voicemail?

  You can not. There is no adjustment to make on a phone. In fact, it is not based on the number of rings, it is a problem of synchronization based on the parameters of the call. You can contact Verizon to see if they can increase at that time here, but even if they can, it won't be much, only a few seconds if they do at all.

• I have a new laptop and I am a newbie on the laptop. I inserted a cd but now how to get out? Of course it is obvious on the desktop what do, but not on laptop.

  I have a new laptop and I am a newbie on the laptop. I inserted a cd but now how to get out? Of course it is obvious on the desktop what do, but not on laptop.

  Well, no, actually, I talked to someone at Microsoft and he discovered for me. The answer is the keyboard on the top right of my keyboard and the third button on the end. Worked like magic.     Thanks again!

• I am also having the same problem with the same updates. I have Windows XP SP3 and it's updates with the problem.

  I am also having the same problem with the same updates. I have Windows XP SP3 and it's updates with the problem.

  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2572073)
  A security update for .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB2518864)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2633880)

  They all install properly but switches back to windows update to install. It's some kind of loop.

  Hi billy73,

  In addition, if you still have questions, please take a look at the thread similar here with a solution as possible.

  I hope this helps!

• I have Vista 32 bit and I recently installed AVG free antivirus, 2013

  I have Vista 32 bit and I recently installed AVG free antivirus, 2013

  each file or app I try to download I am failed - Virus detected... I have removed the 2013 AVG, but still get the msg for each download (file or app)

  You have access to another machine? If you do, download it to this machine and then copy the .exe downloaded on the computer problem. You will probably want to get this as well.
   
   
  Download the free version of this tool. First check the updates and then run a full scan.
   
  Malwarebytes Anti-Malware
  http://www.Malwarebytes.org/products/malwarebytes_free 
   
   
   
  
   
   

• I have an installed program 'click to call Skype"and he refused to be uninstalled. How can I remove this program from my laptop

  I have an installed program 'click to call Skype"and he refused to be uninstalled. How can I remove this program from my laptop

  Hello

  ·         What web browser do you use?

  ·         You get the error message

  Follow these steps:

  Step 1:

  To disable this, the simplest method is to remove or uninstall the plugin Click-to-Call with Skype , through the Control Panel Add/Remove or uninstall function.

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Step 2:

  Click and call can also be disabled by disabling or removing the plugin through your

  browsers manage add-ons/plugin options (actual procedure varies depending on the browser).

  Step 3:

  There is a 'Rapid Product Removal Tool' from Microsoft which can be used to remove the programs that we are not able to remove it by using the functionality of the program.

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  See also:

  Skype Support site: https://support.Skype.com
  Skype support network: http://community.Skype.com/