I HAVE COMPAQ MINI 110 HAVE A PROBLEM WITH THE PASSWORD OF PIOS. SYSTEM HAULT CODE IS; CNU9243TDY

Similar Questions

• I have a problem with the password being filled automatically.

  Original title: automatic password with filling points

  My Windows log in password auto fills points after clicking on a key shot. I closed and re-tried 3 times.  I emptied the usb ports and that did not help either.  I'm not sure that reset my password will help.  Any suggestions?

  If the keys are pressed (locked/stuck) or keyboard error may raise this issue.

  You can try the following:
  Go to the page of the BIOS Setup, create a password (for this process, see your system manual). Now, enter a text of your choice. If you find the same mistake, it's a problem with the keyboard.
  You can consult your PC manual contact the manufacturer of your PC of any troubleshooting this utility in your PC to test the keyboard.
  Response if the issue is not with the keyboard.

• I have a problem with the password is not eligible not on computer.

  Original title: password problem

  I have a toshiba laptop and when I put in place I used the same username and password on all so one day I went to get my desktop to defragment my computor and my password does not work but it always works for everything but don't know I can't do anything that you have to admid clearance for help me

  Hello

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  And this is the Information from Microsoft on the problems of passwords;

  You will need to borrow a Microsoft DVD from a friend, Recovery DVD a manufacturer without these special work options available.

  • http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  If none of the above applies to you or work for you, you need to reinstall the operating system.

  See you soon.

• I have a problem with the password on the virtual machine.

  Original title: passwords & Windows 7 virtual machines

  Hello

  I am running windows 7 pro 32 bit, with a windows XP virtual to develop existing software.

  The hosts & VM connect to a file on the network server. The file server is running windows XP, the network is a simple working group. I've manually created a limited user on the file server with the same name and password as my logon to windows 7.

  Today, I changed my password to connect to windows 7, which I am not as often as the security people recommend that I do. I changed the password on the file server to synchronize and also the password on the virtual computer.

  The virtual machine is maintaining however, somewhere the old password, which crashes, and I get the logon screen. If I enter the new password it connects then. I went into the settings of the VPC and delete the credentials saved, without effect. I removed "enable on startup" of integration features, also without effect.

  So I get the password in the VPC, but then I have to enter the password to access the network share. Or I can enter the password each time I start the virtual machine. The second is less painful, but still annoying.

  Any thoughts?

  Hello

  Thanks for posting in the Microsoft Community.

  According to the description, it looks like you are facing a problem with windows Virtual PC.

  The question you posted would be better suited in the TechNet Forums; We recommend that you post your question in the TechNet Forums to get help:

  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• I have a problem with the password admin on XP/SPe

  When the computer that I use now was bought a few years ago for my husband, he created an administrator with a password account. He did not have a password reset disk that I can find (he died a few years ago) and its index for the password means nothing to me. I know that I can reinstall the sys op but who loses a lot of put the info that I don't know and would not be able to restore.

  I guess I have two questions:

  1. is it possible, other than of the reinstall, to pass the admin password so that I can connect to the admin account?

  2. If I export my settings to transfer them to my new computer Win7, with the admin password transfer to the new system?

  Unfortunately, the only way to change the password for the admin on a computer is with specialized programs that are generally not available. If someone you know IT, they are able to help you.

  Are you using another user account and just have not tried the admin account in the last couple years?

• I have a problem with the password is not recognized on the computer.

  Original title: sign the windows 7
  • HP dV6 laptop model
  • Known password Windows is not recognized, that is when the laptop is started
    
  • No new programs have been downloaded
  • It's not windows Notepad 7 in question, I can't get in the windows 7 from do anything.
    
  • A program to "Find lost password", there are many, help because I am sure that the original password that worked until today has been typed correctly several times since the problem occurred?
  • I've never had a similar problem.
    
  Here you go:
  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your Windows 7 repair CD.
  3. Press a key when prompted to boot from the DVD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Configure Windows to a point when your password has always worked.
  8. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key. This will save you a lot of trouble.

• Disassemble Compaq mini 110-111... BIOS password

  Hello...

  I have Compaq mini 110-1111EV appeared to enter a password... after 3 attempts... Its appearance a Massege... CNU937B30J.. are arrested... Please someone can help remove this problem or this password...

  Thank you

  Try GLaDOS.

  e9lo3o7kpt

  3rd letter tiny L.

  4th and 6th letter lowercase o.

  Use this code to go into the BIOS.

  Disable all passwords that are enabled.

  If demand for CURRENT password using this code.

  Request NEW password just press ENTER.

  If asked to hit just to CHECK password to enter.

  Save and exit.

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• Sierra Siri, «I have some problems with the connection...» »

  Guys,

  I just installed Sierra on my MacBook Pro (retina, 13 inches, early 2015) version 10.12. I can't get Siri at work, the app tracks, he hears what I'm saying, but after awhile, he returns with two messages, both on the screen and verbally "I have some problems with the internet connection. Please try again in a moment. "&"Sorry, I'm having problems with the connection. Please try again in a moment. »

  Any ideas?

  Thank you

  N

  It's a network problem.

  Check the proxy settings that blocks maybe, or a firewall.

  System Preferences > network > Advanced (for your current connection) > Proxies

  Something there?

• I have a problem with the content of spam. Somewhere in the Fox appeared script that's choking me audio spam. Every 30 minutes he's playing an audio clip that is malicious.

  Hello.
  I have a problem with the content of spam. Somewhere in the Fox appeared script that's choking me audio spam. Every 30 minutes he's playing an audio clip that is malicious. I can't find the settings as it eliminated. Now, I don't have any plug-ins and Add-ons strange that were not initially in the Fox, but the problem is there.
  I use the Fox years. The problem, he had 1.5 months after Fox cleaning. If the problem can't win, I'll be forced to give up the browser, and I wouldn't.

  Could test you mode without failure of Firefox? It is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.

  Does not work if Firefox: Hold down the SHIFT key when you start Firefox.

  If Firefox is running: You can restart Firefox in Mode safe mode using either:

  • button "3-bar" menu > "?" button > restart with disabled modules
  • Help menu > restart with disabled modules

  and OK reboot.

  Two scenarios: A small dialog box should appear. Click on 'Start mode safe' (not update).

  Any improvement?

  If the problem persists in Mode without failure, could reinstall you Firefox in this way:

  Clean reinstall it

  We use this name, but it isn't about deleting your settings, this is to ensure that the program, files are clean (not incompatible, corrupt or exotic code files). As described below, this process does not disrupt your existing settings. Don't uninstall NOT Firefox, that does not need.

  (1) download a fresh Installer for Firefox 38.0.5 of https://www.mozilla.org/firefox/all/ in an ideal location. (Scroll down your preferred language).

  (2) close Firefox (if applicable).

  (3) to rename the program folder, either:

  (Windows 64-bit folder names)

  C:\Program Files (x86)\Mozilla Firefox
  

  TO

  C:\Program Files (x86)\OldFirefox
  

  (Windows 32-bit folder names)

  C:\Program Files\Mozilla Firefox
  

  TO

  C:\Program Files\OldFirefox
  

  (4) run the installer you downloaded in the #1. It should automatically connect to your existing settings.

  Any improvement?

  Note: Some plugins can only exist in this OldFirefox file. If it is missing something essential, present in these files:

  • \OldFirefox\Plugins
  • \OldFirefox\browser\plugins

• Hello! The new version of Firefox, I have a problem with the opening of the site VKontakte. The browser displays the following error message: "Firefox has determined that s.

  Hello!
  The new version of Firefox, I have a problem with the opening of the site VKontakte. The browser displays the following error message: "Firefox has determined that the server redirects the request for this address in a way that it will never end." How to solve this problem? Please excuse me for my English.
  Sincerely, Vsevolod.

  This can be caused by corrupted cookies or cookies that are not sent or otherwise blocked.

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  See also:

  • http://KB.mozillazine.org/The_page_is_not_redirecting_properly
  • http://KB.mozillazine.org/cookies

• I have a problem with the letter p

  Cuando presiono p be p escribe y followed sola escribe muchas barras diagonal invertida

  Google translate:

  I have a problem with the letter p

  When I press the p and p is written follow-up written itself that several inverted diagonal bars

  Try another keyboard.

  What specific model Mac? This is the Office Mac Pro forum

• I have a problem with the numbers. Help, please!

  I have a problem with the numbers. I am trying to create a formula that can add a cell only when another cell with a pop-up menu returns on a specific pop.  I can't ignore the cell if it is not on specific pop upward.

  assuming the cell with pop's cell A1

  and if the context menu contains items:

  YES

  NO.

  MAYBE

  and the value you want to add in cell A2

  You can add the value in cell A2 when the context menu is 'YES' like this

  = if(A1="YES", A2, "") +.

  where is the expression that adds other cells if you want

  could be another cell

  = If (A1 = "YES", A2, "") + B2

  or a range of cells

  = If (A1 = "YES", A2, "") + sum (B2, D2, G2:H5)

• How can you check if you have a problem with the ghost attack

  How can you check if you have a problem with the ghost attack.

  My ISP (Virgin) sent me a letter saying I could have an attack on my apps by the phantom virus.

  How is this true and what can do

  The XcodeGhost malware affects the apps, mainly Chinese, created using a red version of Xcode.  It is not a 'virus '.  (Look at the difference between computer viruses and malware).  Remove the Apple listed here and get updated with the latest versions of the App Store.

• I have a problem with the HP Deskjet2545 do not print on the computer.

  Printer does not print. Computer says "printer error". Convenience store said that the problem is resolved. The printer is 'ready' doesnot even impression. What is the solution?

  Original title: hpDeskjet2545.

  Hi Matt,

  Thanks for posting your query in the Microsoft Community.

  Printers to print documents, photos, cards and calendars. You have a problem with the printer doesn't work is not on the computer. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.

  Please answer these questions-

  (1) what is the exact error message?

  (2) have you tried the troubleshooting steps?

  (3) what is the version of Windows installed on the computer?

  (4) have you made changes on the computer before the show?

  I would like more information about the issue.

  Note: assuming that you are running Windows 7, I would like to suggest some troubleshooting steps.

  Method 1-

  I would have you look at the article-

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 2-

  I wish that you uninstall and reinstall the printer.

  See the article-

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Method 3-

  I would have you go through the troubleshooting proposed by HP guide.

  Check out the link-

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_task=solveCategory&LC=en&DLC=en&cc=us&product=3571292

  Let us know if you need assistance regarding the issue. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

  Thank you.

• I have a problem with the simulation in Matlab 6.5 and LabVIEW for PID controllers

  I have a problem with the simulation in Matlab 6.5 and LabVIEW. I have a few methods for granting regulators PID in MATLAB to go but not of LabVIEW. Degree of international teams of two transfer but when I passed to the fourth degree is no longer working. We have changed the formula to calculate the parameters for the fourth year and gave me some good values for assignment of Matlab, but when I put on LabVIEW are not resolved. the formulas are available in PDF format and are. Please help me and me someone if possible. Thank you
  Lim.4 generation in comparison methods and the MATLAB program settings are for the service of transfer to the second degree.

  Hello Lascarica,

  I noticed that you are using the screw of PID. Gains on these screws are based on TIME instead of GAIN. You should be able to build a PID regulator and vary the gains and then compare the results.