I have problems with updates

Similar Questions

• Running a server of Freelancer with Windows XP and have problems with updates

  I run a server for a game called freelancer who has been released by Microsoft in 2003. My problem is that, in recent years, when I tried to get the server working after doing a clean install of WinXP Pro and get the updates, the server hanging and not start working properly. After several installations with various combinations of what has been installed after the OS, I finally got the server works, but get this: the server runs only on Windows XP with NO updates. WHY?

  I have a theory that I can't prove it on WinXP... When Freelancer was released in 2003, XP was new and she has no security features there now, and I think that one or more of the mess of updates with the server of DirectPlay 8 which is integral to the operation of the server. Of you Eggheads Microsoft must know what I mean... I don't know enough on XP to do more to make a guess, and it's my guess...

  Thank you for allowing me to escape,
  Tanamir

  Hello

  DirectPlay has been moved to support engineering and is an obsolete API. This was done mainly because of security problems and the fact that most of the features of DirectPlay is no longer relevant. TCP/IP is the ubiquitous network protocol and support for the head-to-head modem, serial port,

  NetBIOS, IPX and other suppliers is no longer relevant. Native API for TCP/IP in Windows is WinSock, and the usefulness of the library is so limited.

  There are technologies in Windows XP SP 2 or later version that provide server under protocols of discovery to manage the features of lobbying (P2P and PNRP), and many third-party solutions exist for matching. Future Microsoft technologies for this will be based on WinSock and not of DirectPlay.

  Support in future versions of the operating system will be determined primarily by the problem of application compatibility and will continue to be available through the Platform SDK for those supporting legacy streaming of DirectPlay applications.

  For reference: error messages when you try to connect to the game multiplayer matchmaking: http://support.microsoft.com/kb/829151/en-us

• HP530: operating system reinstalled, still have problems with updates

  Reinstalled Vista32 OS, on the advice of tech, to 'cure' MS update problems. Use recovery discs. (Recovery partition could not be installed for unknown reason) After reinstall MS update still has problems. Any help would be appreciated.

  After the reinstallation, an update was successful, and then Update Agent failed to update. A number of updates failed (? 10?) and a number have succeeded. Then a small model, only 1.9 MB, Service Pack 1 installed, and then after that check Udates runs, it calls to reinstall Service Pack 1. Again and again and again.

  Thank you, volunteers.

  Hello:

  See if you install the SP1 and SP2 standalone files gets you going to...

  You must install SP1 before installing SP2.

  SP1:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30

  SP2:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=16468

• After re-installing my 9.0 first I have problems with updates

  I have re-installed elements 9.0 on 64-bit Windows 8.1 desktop.

  Everything went well.

  After awhile, the update service indicates that I have to install the following updates:

  • Photoshop Camera Raw 6.5 update
  • Premiere Elements 9.0.1 update
  • Adobe Photoshop elements 9.0.3 update

  The update starts downloading updates, and when it wants to install them for all 3, I get the following message is displayed:

  "Er is een doing opgetreden tijdens het downloaden van deze update. Voert download af in het opnieuw try later. »

  or translated

  "An error occurred during the download of the update.   Close the download and try later again".

  Can someone give me some advice?

  Frederik

  PS. I al an administrator user on my PC

  debroyerlecho

  First Elements 9 on 64-bit Windows 8.1

  There is no need to drop your first Elements 9 due to the downloading situation you have described. That is, unless you need video editing features that are not available in your version. Let me give you the way to the details...

  1. with 9 closed Elements first, download and install the 9.0.1 link update the following

  Adobe Premiere Elements: For Windows: Premiere Elements 9.0.1 update

  2. with Photoshop Elements 9 closed, download and install the 9.0.3 link update the following

  Adobe: Photoshop Elements for Windows: Adobe Photoshop Elements 9.0.3 update

  On this one, I would say that you DO NOT download and install. Since its release, has Barbara Brundage (expert)

  does not recommend any use of this update.

  Photoshop Elements 9.0.3 | Barbara tri-de-Tech blog

  3 camera Raw 6.5

  Adobe: Photoshop Elements for Windows: Camera Raw Elements 9 6.5 update

  You should not have more updates after the above mentioned. No other updates.

  If you need help with installation manual Camera Raw or other on this, please let me know... have been

  there and done all this before.

  We will review the results with impatience.

  Thank you.

  RTA

• Problem with update of Photoshop, Illustrator and Indesign CS6

  Hi all. I have problem with update of Photoshop, Illustrator and Indesign on OSx 10.8.4 CS6. Application are OK but update (bug fixies) does not work. Update failed. (U44M1P7)

  Hi El Gondo,

  The following could explain and help solve the problem...

  U44M1P7 - updates:

  http://helpx.Adobe.com/Creative-Suite/KB/error-u44m1p7-installing-upda tes-HYPERLINK

  U44M1P7, U44M2P7 - CC help / cannot apply the extensions 6.0.2 update manager | Mac OS:

  http://helpx.Adobe.com/Creative-Suite/KB/unable-apply-extension-manage r - update.html

  Thank you!

  Ankit

• Hello. I'm just a beginner and I downloaded the itunes 12.3.3 update and now when I right click on a work of art albums all disappear from the track of this album. I also have problems with my get info tab. All of my info from the album crashes.

  Hello. I'm just a beginner and I downloaded the itunes 12.3.3 update and now when I right click on a work of art albums all disappear from the track of this album. I also have problems with my get info tab. All of my info from the album crashes.

  This can help (from turingtest2):

  Fix iTunes for Windows security permissions

• Hi, I can't save all plunge on Icloud? This is the new update of softwer have problem with that?

  Hi, I can't save all plunge (6 IPhone / IPhone 5 / and my ipad on Icloud? is the new update of softwer have problem with that?)

  (1) disconnect from the iCloud and reconnect and try backup

  (2) backup on iTunes then restore the device to factory settings. Try the backup in iCloud. If it works, restore your device from the backup you made to iTubes

• I have problem with windows update

  I have problem with windows update

  and I can't find the Hebrew pack in windows update?

  I have windows 7 ultimate

  You use this procedure: http://support.microsoft.com/kb/972813 ?

  Hebrew should be available, see: http://windows.microsoft.com/en-GB/windows7/products/features/language-packs .

  All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

• I have problems with the installer of Windows and Windows Update, and the solutions that I found for the two each rely on the other broken system to fix the first.

  I use a laptop HP Pavilion dv4-1220us with Windows Vista Home Premium Service Pack 1, a 64-bit operating system, and I have problems with Windows Update and Windows Installer. When I try to install programs, I get the following, or substantially similar message without the error code:

  "Error 1719. The Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. »

  So I tried to download Windows Installer 4.5 and install it. When I try to start the installation, it always hangs on the first step, "Initializing Installation."

  After searching for a solution to this problem, I found that Windows Update may have a solution. So I downloaded the 64 bit version and got a file named 'file Windows6. 0-KB942288-v2 - x 64. I tried to run this file. He opened a box that said, in order "Prepare for Installation", "Full Preparation", and finally "Searching for Updates ', before you open a second box, which reads" click OK to install the following Windows software update: fix for Windows (KB942288). I clicked on OK in this box, which opened another box, which says at the top "updates are installed" and in a smaller section, "initializing for Installation................... »

  However, no matter how long it works, it never gets past "Setup initialization."... »

  So I tried to run Windows Update in Control Panel. He ran for a while, before giving a message saying "to check the updates, you must first install an update for Windows Update." I clicked on the button that says "install now". He has flashed, a moment, "download and installation of updates' before you go to the"check for Updates"and then he brought back the exact same upward ' to check updates, you must first install an update for Windows Update" message as before. I clicked install now once again, only to go into the exact same loop. After about four times in a loop, I gave up on it.

  So I tried to install Windows Installer 3.1v2, which took a while before saying "not enough memory is available to process this command." and the abandonment of the installation.

  So, I tried to download a program from 'Mr. Fix - it' of Microsoft. It downloaded fine and then failed on installation, because of the same Setup error I received initially.

  Finally, I tried to restart my computer and each solution is represented. Then I clean my computer and each solution is represented.

  In conclusion, the mistakes that I have in Windows Update and Windows Installer cordoned off each other, as the mistakes of each program are based on the other program to be repaired. I'm at my wit's end here. My computer works fine without one, except that I can't install new programs. I can access the internet fine, access files fine, all my scans have developed own... I don't really know what is happening. Can someone help me with this?

  Try the sfc scan:
  http://support.Microsoft.com/kb/936212

  If not, repair of Vista:
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• I have problems with the Windows Update feature!

  I have problems with the function of update windows for KB2596598, KB2596744, KB2687310, KB2596786 with an error code of 80070641.  They keep for lack of update!  My current windows is Vista Home Premium! Do you have a solution for this?

  If System Mechanic is or has been installed, it is your troublemaker & you have lots of company!

  See my colleague Maurice RESPONSE message in this thread: http://answers.microsoft.com/thread/d6fedf33-dc1b-451f-9aab-97429f916180

  If still no joy, contact System Mechanic (iolo.com) supported for assistance-, they are well aware of the problem application has caused!

  TIP: If you think that more never your registry database needs to be cleaned, repaired, boosted, to the point, healed, twisted, fixed, magnified, "swept" or optimized (and even more to convince that it is not), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions. See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

• I have problems with windows update

  Hello

  I have problems with the updates of the window.  I read install my window.  and start the update.  I update well until it installs the update for service pack 2. Once it restarts is said to check the updates, you must first install an update for the update of the window...

  When I click on install update of the stop and keep it on the research.  I have don

  ' t even use all the data.

  I already tried the Microsoft fix it and some troubleshooting aspiration which I met on the Microsoft site.
  (error trouble shoots)

  Windows update error 0x80072efd - not fixed

  recent update - no fixed installation issue.

  Can anyone help me please with her.

  Thank you

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode. If the report is in one language other than English, please indicate the language.

  Please download and share with everybody fresh copies of your System log and journal of the Application (two files) of your event viewer on your disc one and post a link here. You can delete any previous copies of your OneDrive records.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

  General remarks on event viewer
  http://www.gerryscomputertips.co.UK/syserrors5.htm

• After the last updates of windows have problems with start up and now drivers

  Hello

  After the last updates of windows have problems with start up and now drivers. I get an error code 21 when I try to install the drivers AMD apparently missing.

  May 14, last night I had several (automatically) downloaded windows update

  Today, I was unable to boot my computer with Windows - tried the disk check, start checks etc, and eventually had to use System Restore (for help before the critical update to restore).

  Perfection, everything works, but knowing that windows will attempt to redo an automatic update, tried to check online - no one seemed to have a problem and (naivly) thinking I could always do another restore of the system, I rebooted again.

  Same thing worse. Could not do a sys restore either just before restarting or last night. Chose a date earlier (last week) but then lost the USB drivers and pilots display. Downloaded updated but refuses to let my AMD driver install Windows I have a very unpleasant screen... and I must now stop the installation of this update "critical."

  Would appreciate advice how do my installed display driver or whether anyone else has problems following this update

  Thank you

  Hi Jane,

  You have a disk to install Windows 7 with you?

  I suggest you to check the event viewer for error details report.

  Open event viewer.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

• Anyone else have problems with the unethical choice to use the word "updated"?

  Does anyone else have problems with choosing the unethical to use the word "update" when what is going on is an UPGRADE that requires of new licences and payment?

  "updates" don't involve payment, make "improvements".  Given that you posted in the forum of creative cloud, if you have a subscription paid and that you are asked to pay more than the cost of the subscription it is more likely a problem with your installation/account.

• I work with a third-party provider that adds agricultural markets that will update every 10 minutes on my site of muse. I'm a designer by trade, and they are the html code. They have problems with my original design elements being pushed around when they

  I work with a third-party provider that adds agricultural markets that will update every 10 minutes on my site of muse. I'm a designer by trade, and they are the html code. They have problems with my original design elements being pushed around when they add the js include. They recommend at this time that I use another program like Wordpress, but I won't do that, because a large part of the site is designed and just add the markets. Here is the link to the site. At this point, the home page is the question. I can also provide a screen shot of how markets are supposed to look like

  This part does not seem too difficult.

  I bet they are now trying to "knit" their share of data right in your Muse- generated page, and they tell you that your code is terrible (and their smells like daisies). The usual clash...

  But it might be easier for you (and many others) if they offer their content as a separate page of small, so you can incorporate it as an iframe tag in an HTML object in Muse. No matter what code for permission to host the iframe, could be inserted as a simple script in Panel of Options of Page of Muse.

• I have problems with my games after update my iPad 2 to 9.3.2,and can anyone help?

  IS that what someone has problem with updated their 9.3.2 at ipad2?

  Yes.