I have purchase create a professional customer $ 19 Plan experience, but in this section do not create widget option

Similar Questions

• I have House part for my iPhone and apple TV, but the iPhone libraries are not listed under computers on Apple TV.  I don't see libraries for my Mac.  I use the same ID across the three devices apple

  I have House part for my iPhone and apple TV, but the iPhone libraries are not listed under computers on Apple TV.  I don't see libraries for my Mac.  I use the same identifier apple through the three devices. I have an iPhone 6 more working 9.0. The devices are all on the same home network running.

  You can't share a library that is located on an iPhone, iPod or iPad with other devices. You can only share a library that is located on a Mac or a PC with other devices. On other devices, iPhone, iPod and iPad for example, you then activate home sharing to connect to the shared library.

• I have a search bar in the middle of my homepage of this work does not

  a bar of firefox in the middle of my home page search doesn't work.

  (Note that delete the file chromeappsstore.sqlite can give you one does not search on the topic bar: homepage)

  If there is a problem with the search through the default value: home page and then try to reset the search engine used on the subject: homepage.

  Reset the pref browser.startup.homepage_override.mstone through the context menu by default on the topic: config page and close and restart Firefox to restore the on: default home page.

  • http://KB.mozillazine.org/about:config
  1. Open the topic: config page through the address bar
  2. Type in the filter bar: mstone
  3. Right-click on the browser.startup.homepage_override.mstone line, and then select: Reset
  4. Close and restart Firefox

  If this did not help, then remove the button Delete the chromeappsstore.sqlite file in the Firefox profile folder and repeat the foregoing.

• have replaced my HARD original with an SSD drive, but now my laptop does not recognize HP support assistant?

  Dear Forum,

  I replaced my original HARD with a SSD drive, but now HP support assistant recognizes my phone? The program runs but updates always fail and when I look at general specifications the serial number, product name, number of product, microprocessors, system memory, motherboard, bios system, drive hard (s), and optical drive (s) are all empty. Interestingly, it recognizes the device to display (s) as being mobile intel (R) HD graphics and current resolution of 1366 x 768 and refresh rate 60.

  My laptop is an Australian model HP DV4 3029tx, which is an intel i5 14 "(2ème génération) with AMD graphics 6750" I replaced the original 640 GB hd with a 180 GB ocz vertex 2 using acronis to clone the drive.

  I would be grateful is anyone know how to get hp support assistant to recognize my computer.

  Thank you very much

  Hello
  Try this: http://h30434.www3.hp.com/t5/Desktop-Operating-Systems/HP-Support-Assistant-not-working-on-Win7/m-p/736511#M34734
  I think that cloning might be the question because the original configuration has been changed. Simple uninstall and reinstall again could possibly solve the problem as well...

• How to create widget in my account of sign of echo

  I can buy $ 19 Plan for create a professional customer experience but, in this plan do not provide create widget option..

  so please help me how can I provide this option...

  Hello

  The Widget is available for parcel business and Global.

  Thank you

  Jat

• On my iPod Nano 7th generation, there are some artists who are not listed, although their songs are on the iPod. For example, I have two Blue Oyster Cult songs on the iPod and they show, but Blue Oyster Cult is not listed under "artists".

  On my iPod nano, 7th generation, there are artists who are not in the list of "artists". For example, I have two Blue Oyster Cult songs appearing under "Songs", but Blue Oyster Cult is not indicated under "artists". Is it possible to have the COB and other artists who do not appear to show up under the "artists"?

  See Missing artist or Album not with others by the same artist.

  TT2

• No recovery snapshots have been created

  I have a Seagate replica for backup drive and received the error message that is mentioned in the thread above topic. The help of seagate message said:

  ***************************************

  Error reply: no recovery snapshots have been created for 216 hours

  Previous

  Subscribe

  A possible reason for the warning indicating no recovery snapshots have been created for 216 hours is related to the Volume Shadow Service. This same service may be responsible for responding continuously copy files, may also slow down the computer. To determine if the Service is configured, follow these steps: Click on Start, then all programs. Select Accessories. Click command prompt. For Windows 7/Vista, right click on the item and select run as administrator. Type CD C:\Program Files\Seagate Replica\bin\ (for 32-bit Windows) cd C:\Program Files (x 86) \Seagate Replica\bin\ (for Windows 64-bit) and press ENTER. Type rbvss.exe C: and press ENTER. Allow the command to complete (30 seconds or more) - the last line should read instant creation made. If made snapshot creation does not appear and the error value is displayed, this indicates a problem with the Volume Shadow Service. The information below explains how you can follow to set up the service. The first resource located at This Microsoft web page. ****************************************** Run the rbvss.exe I get the message: Microsoft Windows [Version 6.0.6002] Copyright (c) 2006 Microsoft Corporation.  All rights reserved. C:\Users\Lee>CD C:\Program Files\Seagate Replica\bin\ (for 32-bit Windows) The system does not have the specified path. C:\Program Files\Seagate Replica\bin\ C:\Users\Lee>CD C:\Program Files\Seagate Replica\bin > rbvss.exe C: RBVSS.exe 3.0 (Option: create the shadow copy set) ERROR: COM 'CreateVssBackupComponents (& m_pVssObject)' call failed. -Returned HRESULT = 0 x 80070005 -Text error: access denied. -Please re-run VSHADOW. EXE with the /tracing option for more details C:\Program Files\Seagate Replica\bin > VSAHDOW. EXE/TRACING ' VSAHDOW. EXE' is not recognized as an internal or external, order operable program or batch file. C:\Program Files\Seagate Replica\bin > rvbss.exe 'rvbss.exe' is not recognized as an internal or external command operable program or batch file. C:\Program Files\Seagate Replica\bin > rbvss.exe RBVSS.exe 3.0 Use: rbvss [optional indicators] [commands] List of optional indicators: -?                 -Displays the screen to use -wi = {name of author} - check that a writer/component is included -wx = {name of author} - exclude a writer/component to create game or restoration -bc = {file.xml} - generates the backup components document during the creation of the shadow. -script = {file.cmd} - creating script SETVAR -exec = {command} - custom command executed after the creation of clichés termination - wait - Wait before program -check - Check to see if the VSS is working properly (returns 0 no failure) -Difficulty - trying to solve the VSS components (returns 0 no failure) -tracing - running VSHADOW. EXE with improved diagnostics List of commands: {volume list} - creates a shadow on these volumes -ws - list writer State

  -wm - list writer metadata summary

  detailed list of metadata - wm2 - writer

  -q--list of all shadow copies in the system

  -qx = {SnapSetID} - a list of all the shadow copies in this series

  s = {SnapID} - the cliché of the ID of the list

  -da - deletes all shadow copies in the system

  DX-= {SnapSetID} - deletes all shadow copies in this series

  -ds = {SnapID} - removes this cliché

  -r = {file.xml} - based restoration on a previously generated backup components

  doc

  -rs = {file.xml} - simulated restoration based on a backup previously generated

  Doc components

  -svcQuery = ServiceName - queries the State of the named service (e.g. - svcQuery = vs)

  s)

  -svcStop = ServiceName - tries to stop the named service (e.g. - svcStop = vss)

  -svcStart = ServiceName - tries to stop the named service (e.g. - svcStart = vss)

  -svcDelete = ServiceName - removes the named service (e.g. - svcDelete = vss)

  -svcCfgAutoStart = service - configures the service to AUTO_START

  -svcCfgBootStart = service - configures the service of BOOT_START

  -svcCfgOnDemandStart = service - configures the service of DEMAND_START

  -svcCfgDisabled = service - configures the service to people with REDUCED mobility

  -svcCfgSystemStart = service - configures the service of SYSTEM_START

  -regDll - register a DLL as a service

  -unregDll - unregister a DLL as a service

  C:\Program Files\Seagate Replica\bin >

  Hello

  I suggest you contact Seagate support for assistance:

  http://www.Seagate.com/support/contact-support/

• I have purchased the monthly pack of LR and PS for my iMac but appear always as "evaluation period". I have another LR and PS pack installed on my MacBook Air ajd it works ok. What should I do to unlock the "trial period" message, when I start LR o PS?

  I have purchased the monthly pack of LR and PS for my iMac but appear always as "evaluation period". I have another LR and PS pack installed on my MacBook Air ajd it works ok. What should I do to unlock the "trial period" message, when I start LR o PS?

  Hello

  Please see the links below:

  Connect and disconnect activate Cloud Creative applications

  Applications creative Cloud back in test mode after an update until 2015 for CC

  Enable and disable Adobe products

  Creating cloud connection errors

  Creating cloud app request serial number

  Let us know if that helps.

  Kind regards

  BANI

• How to place a photo of 'album' in a 'book' you have already created

  How to place a photo of 'album' in a 'book' you have already created

  show the sidebar (menu display == > display the sidebar) and open the album - dragging the photo of the album to the project window to the bottom of the sidebar

  LN

• Can I reorder the accounts once they have been created?

  I have created a number of accounts of e-mail, but unfortunately most important were created last. I would like to move this account to the top of the list, but I don't see any way to rearrange the display account once the accounts have been created.

  Is it possible to rearrange accounts once they have been created?

  Thank you

  Install this add on.

  https://addons.Mozilla.org/en-us/Thunderbird/addon/manually-sort-folders/?src=SS

• I have two accounts in Apple Mail. Mailed to some documents from one to the other. When I received the email, it had been sent to about 30 people from my Contacts. How could it happen? I have never create a distribution list.

  I have two accounts in Apple Mail. Mailed to some documents from one to the other. When I received the email, it had been sent to about 30 people from my Contacts. How could it happen? I have never create a distribution list. MBP OS 10.11.4

  Open the "sent" folder on the account that you mailed to and look at the message that you sent it to see.

  You have email of the accident to a group? You have a group created in the application of Contact with these names? Or maybe that you click on reply to all to create the message?

• Try to disconnect from the iCloud on my Macbook Air (El Capitan 10.11.2) but in system preferences, it says I have to create a new password for my Admin account - and then the new password I get says "password does not match"?

  I am trying to add my outlook email account to the Mail app, but because it's the same email for my iCloud, for some reason, they are linked, and I discovered that I need to disconnect from iCloud, and then add the outlook account.

  But when I try to disconnect from the iCloud in system preferences > accounts on the internet, it says I have to create a separate password - but when I get one it says "passwords do not match"? I tried to do different and same, nothings working: S

  The dialog box is like this:

  [Stop using iCloud?]

  Create separate password for (name of the admin account)

  -You will no longer be able to log in or unlock your screen with your icloud password, and you will need to remember two passwords separately.

  iCloud password: __________

  New password: __________

  Check: _

  Index of password: __________

  [Use the separate password?]

  Not sure why that is, that the password does not when it's supposed to be the new s password?

  Also, I would like to know what to put in the box check?

  Help much appreciated!

  Thank you

  Oh wow. I just realized I was leaving the case confirm the void and the message "password does not match" mentioned. I just need to retype my password. Hilarious that I have not worked this one earlier.

• This file does not have a program in association with it. Create an association in the folder option control panel

  I can not open the photos as attachments in my outlook express 6. I get the following. "This file does not have a program in association with it. Create an association in the Panel options forder. »

  I use xp sp3.

  When I save the image on my hard drive I have no problem opening it.

  I'm sorry I didn't read your response completely, will try what you suggested

  Thank you.

• I have purchase windows xp from a Web site and all I got is a product key and the link.

  Is there a way to know if the product key is genuine (not already belonged to someone else)?

  The key you have purchased is a counterfeit.

  XP is not available by such means and has never been.

• I have windows xp professional and I have a popup that says firewall protection is disabled, but when I click on it it shows that its turned on

  I have windows xp professional and I have a popup that says firewall protection is disabled, but when I click on it it shows that its turned on

  Hello

  
  1. were there any changes (hardware or software) to the computer before the show?
  2. is this a popup to third party software?
  
  Use the Microsoft Safety Scanner in full scan mode and remove all threats that is not detected by it and see if the problem persists.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection.
  
  Hope this information helps.