I have the Adobe reader on my computer. Adobe has been on my computer at the time of purchase. I have now will not open
I have Adobe Reader XI on my computer. It's on when I bought computers. It worked well but have recently been making a "Fatal Error - Acrobat failed to load its core DLL. Now it does not open. Earlier I had received messages that Adobe did not download successfully with the updates I think
Hi lynnebeverlykaiser,
Please visit the Doc KB:http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html
Tags: Acrobat
Similar Questions
-
I installed the beta version of lightroom 5 when he was 1, it does not open, I installed the current version through creative cloud, it will not open either. I tried to delete the preferences.agprefs file, did not help. Lightroom 4 runs normally. I use Windows 8.1
They said that nothing happens when they begin to LR. It is a symptom that began with LR 5.5 or whatever the first version which was installed after that, where for me deletion of content but do not delete the folder SLCache, itself, is what worked for me:
Different things to try are listed here, where the Solution 4 is what worked for me:
https://helpx.Adobe.com/Lightroom/KB/unable-launch-Lightroom-55.html
-
The CD/DVD tray on my eMachinesT3616 will not open.
The CD/DVD tray on my eMachines T3616 will not open. Solution?
Hello
The drive is just stuck?
For the readers of the status bar:
Sometimes they get stuck. There is a small hole on the front of the CD drive that you can stick a
a paper clip that will release him and the reader to open.Create a trombone in car Opener
http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htmOpen a CD/DVD player with a paper clip.
http://www.josepino.com/?open_cd-dvd_paperclip=================================
For the readers of the slot:
Check with the manufacturer of system on how do to eject the disc.
Dell xps m1330 dvd drive will not eject cd inside<-- check="" these="">-->
http://www.FixYa.com/support/t2643828-dell_xps_m1330_dvd_drive_will_not_ejectBe careful as you may damage the player using the method below:
You may need to get the driver to work 1 However, this could still work.
http://www.tech-tweak.NET/2009/11/how-to-eject-STUK-DVD-from-slot-load.htmlThe method used on the Mac could work
http://www.YouTube.com/watch?v=wpWieIoBBrkHow to disassemble the laptop (Dell XPS M1330)<--- voids="" any="" warranty!="" this="" is="" an="">--->
http://ahwee.com/how-to-disassemble-laptop-Dell-XPS-M1330Also have heard double tape on a credit card or play can work.
===========================================================
If necessary:
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
After you install the new operating system of El Capitan for my macbook, Illustrator will not open and told me that I had to update my Java. When I followed the link provided with the message that popped up, it would not download on my computer for some reason any. After trying to solve the problem for hours, I finally uninstalled illustrator, but now I can't understand how to reinstall. I need help reinstalling the program and then fix the Java problem once it is reinstalled.
magroot,
For the Java download successfully, I think that you look here or here:
https://jdk8.Java.NET/Download.html
http://oliverdowling.com.au/2014/03/28/Java-SE-8-on-Mac-OS-x/
For reassembly, you can download version:
CC:
http://www.Adobe.com/downloads.html?promoid=JZEFS
Before CC:
http://helpx.Adobe.com/x-productkb/policy-pricing/CS6-product-downloads.html
http://helpx.Adobe.com/Creative-Suite/KB/CS5-5-product-downloads.html
http://helpx.Adobe.com/Creative-Suite/KB/CS5-product-downloads.html
http://helpx.Adobe.com/Creative-Suite/KB/CS4-product-downloads.html
http://helpx.Adobe.com/Creative-Suite/KB/CS3-product-downloads.html
l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm
Note: If you have the version CS2 Premium Suite, you need to download the standard and then download Acrobat and GoLive separately under their own serial numbers for replacement.
Be sure to update, as appropriate:
Before CC:
http://www.Adobe.com/support/downloads/product.jsp?product=27&platform=Windows
http://www.Adobe.com/support/downloads/product.jsp?product=27&platform=Macintosh
-
I down loaded the 5300 Kodak down load nd now the printer works well not. It is said, to use advanced point positioning mode select a paper size by a line and the paper tray
Hello Forrestar,
Thank you for your message. We will try to remove the software that you have installed, and then reinstall the latest version of the software for your device. Did this update also includes a new driver? If so, you could try to restore your driver to the previous version. Please let us know so that we can help you more to get this problem is resolved.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
Pavilion d4100y powers, but the monitor is blank and CD player will not open
When I turned on the desktop computer today, it seemed to turn on, but nothing came on the monitor. Normally, I can hear the disc turns, but it was pretty quiet. I couldn't open the trays of CD player, even though he was technically under tension. I tried to connect a different monitor with the same results. I also tried the reinstallation of the material inside the desktop computer to make sure that everything had a secure connection. No luck. I tried to reset the BIOS with the keyboard steps (such as listed on hp.com), but I'm not sure that the keyboard has been recognized.
I read a few other posts that mention replacing the power supply or the motherboard, but it wasn't a specific situation. I would like suggestions. Thank you.
If the power supply fan is grinding so it's time for a new power supply. Maybe it's time for the PC repair workshop local peek unless you want to try the repair yourself.
These "How-to" articles could be useful.
-
I guess I tried to get to the ICloud, and he has been churning for hours. How can I stop it? The Cancel button is grayed out. And I have ack
are unable to other options in system preferences. It just brings back me to the window to iCloud churning. Thank you.
What you're trying to do with iCloud, exactly? Have you tried pressing Command + Option + escape to force quit?
See you soon,.
GB
-
Why the Microsoft Expression Encoder 4 screen Capture will not open?
I don't really know where to put this so if this is in the wrong section, sorry.I installed this program several times (several versions) and whenever I click the link it does not open. Nothing happens. Microsoft Expression Encoder 4 (the editing program) works fine, but the screen capture program wont open. Why?It does not open with administrator either. I use Windows 7, btw.So after changing back to extended desktop, I could restart the program, so I thought about it, but it would have been nice if she had worked in eyefinity mode. Well.
-
When I go to the library and open my videos, I can see those I moved, and when I see them, WMP automatically goes to the part of the music from the player. I hear the sound but get no video.
I'm on Windows 8Your computer may lack the codec, download and install K-lite codec pack can solve the problem. K - lite codec pack is free and safe, and it includes almost all the video codec and audio codec. -
tried to open the Web site but couln t open now will not open home page
tried to open the link to the Web site and all I got was a framework and a blank page. Stop and now the homepage is now just a frame with a black page. have uninstalled and reinstalled but still.
Start Firefox in Safe Mode {web link}
While you are in safe mode;Type of topic: preferences< enter > in the address bar
Select Advanced > General.
Find and stop using hardware acceleration.Search web sites secure. Are there problems?
Then restart.
-
on the mac, when I go to albums will not open. then the computer freezes need to stop and start again, but same thing happens again can not use Organizer items 14 thank you
reset your preferences - https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm
-
Hello
I recently reinstalled my laptop (64-bit) Windows 7 Pro. It has all the necessary Windows updates.
I installed Photoshop CS6 (64 and 32-bit) and I've installed all the updates it needs.
It will not open any JPG or RAW, .tif, .jpg, .dng and .cr2 files. Before you reinstall Windows Photoshop worked well.
When I try to open an image file that Photoshop does not open, so the file type is associated with Photoshop, but that's all. The software is running, but it won't open the jpg or tif, and it does not open Camera Raw to display the RAW file.
If I double-click on a new image, then a new instance of Photoshop is open, in addition to the already open instance, but still no picture.
If I click file-open and navigate to the file it will then open in Photoshop and Camera Raw 9.1.1 and the picture shows successfully.
Strange!
The only thing I think currently, is that I have 2 partitions on the laptop, with C: and a D: readers, with the users folder, which is held on D. Photoshop is confused by there? Well it is exactly how the laptop has always been in place, and it was already defined in this way before Photoshop has been installed.
I tried to uninstall and reinstall. I tried to install just Photoshop 64 Bit, not 32 bit (I don't really know why I get the two offered, to be honest.)
I am now lost and would like to receive helpful suggestions!
I "solved" this problem!
It seems that Photoshop won't open these files from a Windows 7 'Library' that points to a redirected folder.
However, if I create a mapped drive with a drive letter local, the actual path of the files, (for example \\Server\FolderRedirections\Michael\Pictures), then it works OK.
It is a good work-round and it makes no difference to me if I use a mapped drive or library I put just one correct, in the section 'Favorites' from Windows Explorer.
Thanks for the suggestions guys, that helped me a lot. I hope this answer helps someone else, even if my situation may not be a common scenario.
-
CC will not open - hangs at the splash screen
Had a problem with my video card where he died so I went back to the use of the onboard video. First Pro CC will not open at all. I tried uninstalling and reinstalling several times. All my other CC Adobe software works without problem and the integrated video card has the last update directly from the manufacturer's Web site. When I try to open Premiere Pro the splash screen appears, starts to load, then a Windows error box pops up saying that the program has unexpectedly, he's looking for a solution, says that there is not and the only option is to close.
Thanks I actually just found the answer on my own - it worked for me: first cc pro trial hangs
-
In order to become a distributor of volume Adobe Reader, (my computers have no internet access), I need to fill out the Distribution of Volume License Agreement, but will not accept an answer I gave to the question: "Please indicate the product or service name and description.
This form must be completed and submitted online. Also the browser Javascript must be activated.
https://distribute.Adobe.com/mmForm/index.cfm?name=distribution_form&PV=RDR
-
Dear Sir/Madam, as my Mac Air proved to be malware. I had to reset my computer. My adobe has been deleted by the agent from the computer. Now I have to reinstall my computer, can I have a serial number again? Thank you. I received your response, I still don't know how to get the serial code. You could just please give me the original serial code? Thank you very much
Check your Adobe account online for the serial number (toquickly find your serial number). Otherwise, you will need to contact the Support from Adobe directly using chat to request serial number.
To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache. If it fails to connect, try to use another browser.Serial number and activation support (non - CC) chat
https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp
Maybe you are looking for
-
Re: Satellite A200-1FL: BIOS asking me a password that I don't know
Hello world Last week was a bad BIOS update and my laptop has not begun. I managed to fix it with the crisis recovery disk and the "BIOS update" of the toshiba support web http://support.toshiba-tro.de/tools/eula/info_eng2.asp for Toshiba Satellite A
-
Elitebook HP® (Elitebook 8440p)
I just buy an Elitebook 8440. It will come with 4 GB of ram, and I was told that the max ram is 8. I have 4 GB of ram of the dead laptop. Part number 621569-001. How can I make sure that what I have is good to use the new computer? I checked HP
-
Hinge replacement laptop computer key
I was wondering if a hinge replacement key would be covered by the warranty of the computer.
-
I get a message that the 6 updates are available and to try to install them, get an error message with the code 8007068, saying that the updates were not installed. Pls help
-
External DVD drive for W3-810-1600
W3-810-1600 will supply an external DVD drive? I want to reinstall Windows from my recovery disc. What is a decent DVD player to buy?