The CD/DVD tray on my eMachinesT3616 will not open.
The CD/DVD tray on my eMachines T3616 will not open. Solution?
Hello
The drive is just stuck?
For the readers of the status bar:
Sometimes they get stuck. There is a small hole on the front of the CD drive that you can stick a
a paper clip that will release him and the reader to open.
Create a trombone in car Opener
http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm
Open a CD/DVD player with a paper clip.
http://www.josepino.com/?open_cd-dvd_paperclip
=================================
For the readers of the slot:
Check with the manufacturer of system on how do to eject the disc.
Dell xps m1330 dvd drive will not eject cd inside<-- check="" these="">-->
http://www.FixYa.com/support/t2643828-dell_xps_m1330_dvd_drive_will_not_eject
Be careful as you may damage the player using the method below:
You may need to get the driver to work 1 However, this could still work.
http://www.tech-tweak.NET/2009/11/how-to-eject-STUK-DVD-from-slot-load.html
The method used on the Mac could work
http://www.YouTube.com/watch?v=wpWieIoBBrk
How to disassemble the laptop (Dell XPS M1330)<--- voids="" any="" warranty!="" this="" is="" an="">--->
http://ahwee.com/how-to-disassemble-laptop-Dell-XPS-M1330
Also have heard double tape on a credit card or play can work.
===========================================================
If necessary:
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.
Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit
Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml
Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116
The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461
When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052
Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems
CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/
Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems
Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.
Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.
===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.
Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.
Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.
Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.
Forums - a lot of expert real help
http://Club.myce.com/
CD/DVD units
http://www.myce.com/storage/
Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.
DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
Tags: Windows
Similar Questions
-
I installed the beta version of lightroom 5 when he was 1, it does not open, I installed the current version through creative cloud, it will not open either. I tried to delete the preferences.agprefs file, did not help. Lightroom 4 runs normally. I use Windows 8.1
They said that nothing happens when they begin to LR. It is a symptom that began with LR 5.5 or whatever the first version which was installed after that, where for me deletion of content but do not delete the folder SLCache, itself, is what worked for me:
Different things to try are listed here, where the Solution 4 is what worked for me:
https://helpx.Adobe.com/Lightroom/KB/unable-launch-Lightroom-55.html
-
After you install the new operating system of El Capitan for my macbook, Illustrator will not open and told me that I had to update my Java. When I followed the link provided with the message that popped up, it would not download on my computer for some reason any. After trying to solve the problem for hours, I finally uninstalled illustrator, but now I can't understand how to reinstall. I need help reinstalling the program and then fix the Java problem once it is reinstalled.
magroot,
For the Java download successfully, I think that you look here or here:
https://jdk8.Java.NET/Download.html
http://oliverdowling.com.au/2014/03/28/Java-SE-8-on-Mac-OS-x/
For reassembly, you can download version:
CC:
http://www.Adobe.com/downloads.html?promoid=JZEFS
Before CC:
http://helpx.Adobe.com/x-productkb/policy-pricing/CS6-product-downloads.html
http://helpx.Adobe.com/Creative-Suite/KB/CS5-5-product-downloads.html
http://helpx.Adobe.com/Creative-Suite/KB/CS5-product-downloads.html
http://helpx.Adobe.com/Creative-Suite/KB/CS4-product-downloads.html
http://helpx.Adobe.com/Creative-Suite/KB/CS3-product-downloads.html
l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm
Note: If you have the version CS2 Premium Suite, you need to download the standard and then download Acrobat and GoLive separately under their own serial numbers for replacement.
Be sure to update, as appropriate:
Before CC:
http://www.Adobe.com/support/downloads/product.jsp?product=27&platform=Windows
http://www.Adobe.com/support/downloads/product.jsp?product=27&platform=Macintosh
-
Why the Microsoft Expression Encoder 4 screen Capture will not open?
I don't really know where to put this so if this is in the wrong section, sorry.I installed this program several times (several versions) and whenever I click the link it does not open. Nothing happens. Microsoft Expression Encoder 4 (the editing program) works fine, but the screen capture program wont open. Why?It does not open with administrator either. I use Windows 7, btw.So after changing back to extended desktop, I could restart the program, so I thought about it, but it would have been nice if she had worked in eyefinity mode. Well.
-
Pavilion d4100y powers, but the monitor is blank and CD player will not open
When I turned on the desktop computer today, it seemed to turn on, but nothing came on the monitor. Normally, I can hear the disc turns, but it was pretty quiet. I couldn't open the trays of CD player, even though he was technically under tension. I tried to connect a different monitor with the same results. I also tried the reinstallation of the material inside the desktop computer to make sure that everything had a secure connection. No luck. I tried to reset the BIOS with the keyboard steps (such as listed on hp.com), but I'm not sure that the keyboard has been recognized.
I read a few other posts that mention replacing the power supply or the motherboard, but it wasn't a specific situation. I would like suggestions. Thank you.
If the power supply fan is grinding so it's time for a new power supply. Maybe it's time for the PC repair workshop local peek unless you want to try the repair yourself.
These "How-to" articles could be useful.
-
I have a Mac and downloaded the latest version of Adobe Acrobat to open PDFs on a website that I use. They have changed something recently and informed everyone stand up to this day, that I did, but nothing helped. I get a message "pending." I used the menu "develop" Safari to simulate the Internet Explorer, but without success.
Any suggestions?
OK, that means that Safari does not Adobe Reader, even if you have a. It is a novelty with the last Safari.
Just save the PDF file to your computer and open it from there in Adobe Reader or Adobe Acrobat (whichever one you have).
-
Hello
I recently reinstalled my laptop (64-bit) Windows 7 Pro. It has all the necessary Windows updates.
I installed Photoshop CS6 (64 and 32-bit) and I've installed all the updates it needs.
It will not open any JPG or RAW, .tif, .jpg, .dng and .cr2 files. Before you reinstall Windows Photoshop worked well.
When I try to open an image file that Photoshop does not open, so the file type is associated with Photoshop, but that's all. The software is running, but it won't open the jpg or tif, and it does not open Camera Raw to display the RAW file.
If I double-click on a new image, then a new instance of Photoshop is open, in addition to the already open instance, but still no picture.
If I click file-open and navigate to the file it will then open in Photoshop and Camera Raw 9.1.1 and the picture shows successfully.
Strange!
The only thing I think currently, is that I have 2 partitions on the laptop, with C: and a D: readers, with the users folder, which is held on D. Photoshop is confused by there? Well it is exactly how the laptop has always been in place, and it was already defined in this way before Photoshop has been installed.
I tried to uninstall and reinstall. I tried to install just Photoshop 64 Bit, not 32 bit (I don't really know why I get the two offered, to be honest.)
I am now lost and would like to receive helpful suggestions!
I "solved" this problem!
It seems that Photoshop won't open these files from a Windows 7 'Library' that points to a redirected folder.
However, if I create a mapped drive with a drive letter local, the actual path of the files, (for example \\Server\FolderRedirections\Michael\Pictures), then it works OK.
It is a good work-round and it makes no difference to me if I use a mapped drive or library I put just one correct, in the section 'Favorites' from Windows Explorer.
Thanks for the suggestions guys, that helped me a lot. I hope this answer helps someone else, even if my situation may not be a common scenario.
-
on the mac, when I go to albums will not open. then the computer freezes need to stop and start again, but same thing happens again can not use Organizer items 14 thank you
reset your preferences - https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm
-
When I click on the desktop of creative cloud he will not open even if I am a Member
When I click on the adobe creative cloud desktop icon it will not open. I am a member. Also I can't reinstall Office
uninstall any cc that is installed, run the cleaner by use of the Adobe Creative Cloud cleaning tool to solve installation problems, restart your computer and then install the application of cc from here, download Adobe Creative Cloud apps desktop | CC free trial Adobe
-
CC will not open - hangs at the splash screen
Had a problem with my video card where he died so I went back to the use of the onboard video. First Pro CC will not open at all. I tried uninstalling and reinstalling several times. All my other CC Adobe software works without problem and the integrated video card has the last update directly from the manufacturer's Web site. When I try to open Premiere Pro the splash screen appears, starts to load, then a Windows error box pops up saying that the program has unexpectedly, he's looking for a solution, says that there is not and the only option is to close.
Thanks I actually just found the answer on my own - it worked for me: first cc pro trial hangs
-
phtosmart C5240 all-in-one will not use the cd/dvd tray to print
OK, so I use essential 3.5 photo to print directly on printable CD. Whenever I try to print, the printer tells me to close the CD/DVD tray, but when I do that, it starts printing the status bar with plain paper. Any suggestions?
Also connected to the pc via usb and runing win7
Nevermind found the problem, I myself do not select the type of media correct sorry.
-
With HP8600 I put the Option for tray 2, but it will pull only from the Tray1
Envelopes of printer with HP8600 I put the Option for tray 2, but it will pull only from the Tray1.
Hello finfannc,
Welcome to the HP Forums.
I see that you are having problems with printing envelopes from tray #2.
Just to let you know, the printer will only print envelopes of Lac #1. Here is the link to the User Guide that will show you what all is supported and what bins what to do. For envelope printing, go to page #165-167 media support and sizes of envelope.
Thanks for your time.
See you soon,.
-
I have installed the latest updates for my Compaq desktop computer and the DVD/CD drive bay door will not work. I can get the led light will stop flashing when I open the door all the way, the machine detects the drive but do not read or close on its own, how can I get this disc surgery? Downloading updates, I installed a software disc, when I ejected the disc, the drive comes of is stopped. The computer still sees the drive, but will not read or even close on its own. I also had been using my computer in mode mute until I tried to increase the volume and now the computer tells me no playback device installed. Device Manager acknowledges the Harmon/Kardon soundsticks connected to it, but nothing does, how it works? The Control Panel also sees the soundsticks, but still when I try to move the volume the computer says there is no playback device installed.
Hello
1. do you get any error code or error message?
2. what day you installed recently?
It seems to be a problem with the hardware. I suggest you try to uninstall and reinstall the CD/DVD driver and check if it helps.
Follow the steps to uninstall and re-install the drivers.
a. click on start toreduce this includes this im and then click Control Panel.
b. click system and Maintenance, click Systemand then click on Device Manager.
Note If Control Panel is in Classic view, double-click System, and then click Device Manager.Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type the password, or click allow.
c. in the Manager device, expand CD-ROM/DVD-ROM drives, right click on CD and DVD devices and then click Uninstall.
d. When you are prompted to confirm that you want to remove the device, click OK.
e. restart the computer.
If the methods mentioned above did not help, then it would be best to contact the manufacturer of the computer/CD/DVD player.
Hope the information is useful.
-
Hello. I need to know why my computer or the CD/DVD door will not open, or it appears in my computer. Help me please.
Hello. I need to know why my computer or the CD/DVD door will not open, or it appears in my computer. Help me please.
Look for tiny pinhole under insertion of trombone-door right door should open.
go to Device Manager and check there - cd/dvd rom-for device and driver to date, or a web site, cd/dvd for same.
-
CD/DVD drive will not open a picture disc
My CD/DVD drive will not open a photo record, any ideas? It used to work and now will not, it is not an old computer
Hello
Here's what you can try to solve the problem: http://support.microsoft.com/kb/330135
Maybe you are looking for
-
Ok... I want to see where were the other people on my computer.
-
enable/disable, enable or disable the tabs
Hello Im trying to enable or disable certain tabs in a tab based on a toggle switch control. When I put everything in a while loop and create the control as a false conditional Terminal, then my program works fine and I can toggle tabs on and outside
-
Photosmart HP 5510 is not printing black
After I changed my black cartridge with a new one (original HP 364 XL), it does not print any black. I did all the steps I found here on the forum, apparently this problem is pretty common with the 5510 after he reached the age of one year... but non
-
Update t area MS started with 0xC800042D - FixIt using I get there as the problem but no sugestion to fix?
-
I am able to use the photo gallery for up to load photos on e - bay? I tried, without being able to deal with. I have a file of photo, I moved from my old computer which allows me to use photos to e - bay.