I have trouble to change the color of the text in the code.

Similar Questions

• I have trouble to install the printer HP laserjet P2055 on my Windows 7 HP pavilion

  I have trouble to install the printer HP laserjet P2055 on my windows 7 HP pavilion

  original title: installation problem

  Local printers

  To install a printer, the most common method is to connect directly to your computer. This is known as a local printer.

  If your printer is a universal serial (USB) bus model, Windows should automatically detect and install it when you plug it in.

  If it is an older model that connects using the serial or parallel, you may need to install manually.

  To install the printer (add) a local

  1. Click to open devices and printers.

  2. Click Add a printer.

  3. In the Add Printer Wizard, click Add a local printer.

  4. Choose a printer port page, make sure you use a button existing port and the recommended printer port are selected and then click Next.

  5. On the installation of the printer driver page, select the model and manufacturer of the printer, and then click Next.

     • If your printer is not listed, click Windows Update, and then wait while Windows searches for drivers additional.

     • If none is available and you have the installation CD, click disk, and then navigate to the folder where the printer driver. (For additional guidance, see the printer manual.)

  6. Perform the steps in the wizard and then click Finish.

     Tips

     • You can print a test page to make sure that the printer is working correctly. See print a test page.

     • If you have installed the printer, but it does not work, check the Web site of the manufacturer for troubleshooting driver or updated information.

  My printer does not print.

  It is a difficult problem to diagnose because there are many printers on the market and many reasons why it could not work.

  First of all, make sure that your printer is turned on and connected to your Windows computer according to the manufacturer's instructions.

  Then, try the printer troubleshooter, which will attempt to diagnose and solve your problem automatically.

  Open the printer Troubleshooter

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Printer problems:

  http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx

  Run the printer difficulty of:

  http://support.Microsoft.com/GP/printing_problems?EntryPoint=WHHT

  You can see the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer

  Then, try to update the printer driver on your computer. Sometimes printer problems come from out-of-date driver software, and can be solved by installing or reinstalling, the latest driver.

  To find the latest driver for your printer, first check Windows Update, which is designed to detect the hardware connected to your computer and automatically notify you when new drivers are available:

  1. Click to open Windows Update.

  2. In the left pane, click search for updates, and then wait while Windows searches the latest updates for your computer.

  3. If updates are found, click install updates. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  If you do not see a listed updated printer driver, it is always possible that there are: your printer manufacturer might not have provided to Microsoft yet.

  Most printer manufacturers offer updated drivers on the sections of the support of their Web sites. Drivers are typically organized by edition and Windows printing model. When you have found the right driver, install it according to the instructions of the manufacturer. For more information, see update a hardware driver that is not working properly.

  If your printer still does not work, see the support section of the website of the manufacturer of your printer for model-specific troubleshooting tips.

• I don't have permission to change the itunes media folder or a folder that it contains

  I can't 'consolidate' the files trying to organize my library in iTunes.  I get a message that I don't have permission to change the iTunes media folder or a folder it contains.  I don't see anything wrong, but maybe I'm not good things.  I am running the latest version of iTunes for Windows 64 bit with Windows 10.

  Try to repair the security permissions for iTunes for Windows.

  TT2

• Recently, I installed Microsoft Works 9, and now I have trouble to download the Windows Update update of security for Microsoft Works 9 (KB967044). I am getting error 646. What is a network problem? ___

  Recently, I installed Microsoft Works 9, and now I have trouble to download the Windows Update update of security for Microsoft Works 9 (KB967044). I am getting error 646. What is a network problem?
  I have also recently set up a wireless network.

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps and happy holidays!

  Rob - bicycle - Mark Twain said it is good.

• Help to change the Code to display a table of 7 columns

  Hello
  
  Is that someone can help me to change the code I have a table of column 7 and as many line because it's results?
  
  Right now, all my results are in a table of column 1 and and 1 row.
  
  Thank you
  
  Roseline
  
  

  DECLARE
    vtemp  varchar2(4000) DEFAULT ' ';
   
  BEGIN
    htp.p('<HTML>');
    htp.p('<HEAD>');
    htp.p('<TITLE>DISQUES C</TITLE>');
    htp.p('</HEAD>');
    htp.p('<BODY>');
   
  FOR idx IN
      (
      SELECT DVD_ID, NomFichier,
             row_number() over(partition BY DVD_ID ORDER BY NomFichier  ASC) AS rna,
             row_number() over(partition BY DVD_ID ORDER BY NomFichier DESC) AS rnd
        FROM elements
       WHERE PROJET_ID = 1
    ORDER BY DVD_ID ASC, rna ASC
      )
        loop
        
          IF idx.rna = 1
          then
            htp.p('<TABLE>');
            htp.p('<TR>');
            htp.p('<TD>' || idx.DVD_ID ||' </TD> ');
            htp.p('</TR>');
            htp.p('<TR>');
          end IF;
   
          vtemp := vtemp || '<TD>' || idx.NomFichier || ' </TD>';
   
          IF mod(idx.rna, 7) = 0 OR idx.rnd = 1
          then
            htp.p(vtemp);
            vtemp := ' ';
          end IF;
   
          IF idx.rnd = 1
          then
            htp.p('</TR>');
            htp.p('</TABLE>');
          end IF;
        
        end loop;
   
  htp.p('</BODY>');
  htp.p('</HTML>');
   
  end;

  In fact I've complicated way there:

  DECLARE
      NOT_FIRST_DVD_ID BOOLEAN := FALSE;
      INCOMPLETE_ROW BOOLEAN;
      COLUMNS_PER_ROW NUMBER := 7;
  BEGIN
      htp.p('');
      htp.p('');
      htp.p('');
      htp.p('');
      htp.p('');
      FOR idx IN (
                  SELECT  DVD_ID,
                          NomFichier,
                          ROW_NUMBER() over(partition BY DVD_ID ORDER BY NomFichier  ASC) RNUM
                    FROM  elements
                    WHERE PROJET_ID = 1
                    ORDER BY DVD_ID,
                             RNUM
                 ) LOOP
        IF idx.RNUM = 1
          THEN
            IF NOT_FIRST_DVD_ID
              THEN
                IF INCOMPLETE_ROW
                  THEN
                    htp.p('');
                END IF;
                htp.p('');
            END IF;
            NOT_FIRST_DVD_ID := TRUE;
            htp.p('');
            htp.p('');
            htp.p('');
            htp.p('');
        END IF;
        IF MOD(idx.RNUM,COLUMNS_PER_ROW) = 1
          THEN
            htp.p('');
            INCOMPLETE_ROW := TRUE;
        END IF;
        htp.p('');
        IF MOD(idx.RNUM,COLUMNS_PER_ROW) = 0
          THEN
            htp.p('');
            INCOMPLETE_ROW := FALSE;
        END IF;
      END LOOP;
      IF INCOMPLETE_ROW
        THEN
          htp.p('');
      END IF;
      htp.p('
  ' || idx.DVD_ID ||' 
  ' || idx.NomFichier ||' 
  ');
      htp.p('');
      htp.p('');
  END;
  / 
  

  SY.

• I can't change the code of DVD region back to the original setting. Help...

  I changed the code of DVD region in the USA (region 4) and cannot be changed back to Australia (region 2).

  I watched a movie bought in the States and had to change the code. Now you want to find Australian with code and can not.

  It has only changed once. Can someone help me? THX.

  Hi AUSSIE NSW,.

  Thanks for posting in Microsoft Communities. The problem description, I understand that you want to change the DVD region code. I suggest you look for any third-party application using your favorite search engine.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  For more information, please see this article.

  Change region DVD support in Windows (Windows)

  Thank you.

• Hello! Can I change the code page of the site? How?

  Hello! Can I change the code page of the site? How?

  No, this is not a feature of the Muse. Muse is a home page layout application, not an application of coding.

  You can change the Muse code in Dreamweaver. But the export of next Muse will overwrite the changes.

• Can I change the code in the css files

  When I learned HTML, back in 1999, I learned to make my website in Notepad. After that, I bought Dreamweaver and using since ending with the very old Dreamweaver 4.1 is I think or something like that. No CSS at all. Using this ancient DW, could change the code anywhere right in the code view or by using Notepad.

  With this new DW, can I change the CSS of this part by typing my code here and the code of the edit page?

  Deb

  With the help of a model can be a good starting point because it gives you ideas that you can adapt. The problem with using a model is that the CSS may be complicated or badly written.

  A solution that many people find useful is to obtain a model of project seven (PVII). They are not cheap, but they are of very high quality. I did use a PVII model for many years, but they used to come with detailed instructions on how they work and what to change. I imagine that they always do.

  On the other hand, if you want to learn to do yourself, the best approach is to experiment. A very good free resource for learning CSS is CSS-tricks. If you find lessons learned useful videos, CSS course by James Williamson on lynda.com are excellent. You need a subscription to watch courses on lynda.com, but you can get a free 10 day trial which gives you access to all the courses (I think there are about 4 000 in total). Disclosure: I'm an author of lynda.com, so my vision of the quality may not be impartial.

  Regardless of the approach you take, be prepared to make regular efforts. I started to develop websites more than 20 years, in the early days of the web. It is still a young technology and is developing at a rapid pace. I'm still learning, and I realize that I only started to scratch the surface. When I started first of all, it was common to do everything yourself. Nowadays, many people specialize in one area because it became impossible to know everything.

• Do anyone know how to change the code in CS6, so I can display the SWF in Dreamweaver?

  Someone in a discussion earlier said to change the code but I can't find where to change it in Dreamweaver CS6.  They said to make this change to version 15: < param name = "swfversion" value = "10.0.0.0" / >

  Search the code of your page. Look for a similar line. Change there.

• I get a message saying that I don't have privileges to change the time system.

  I use Windows XP Professional as an administrator. The message is that I have enough privileges to change the time system?

  original title: time system

  As you probably understand, setting is translucent because your IT Department at work has controlled this configuration in the field (which is why I have inserted the caveat "unless the domain policy changed that").  When you exit your laptop from work to home, the domain policies remain in place.  If you do not have the administrative rights on the computer, you should always be able to change the policy by using KB266280 of my previous post... but as soon as plug you it into the network of your domain to work, the policy will return.

  HTH,
  JW

• I have trouble to correct the configuration of the testing server in Dreamweaver CS4.

  Http error codes are 404 (open DW) and 12150 (URL test failed).

  Please see my responses below:

  Moore6931 wrote:

  Thank you for your help, but I don't understand.

  1A right now, I have change the web site locally.  When changes are complete, I copy the files to the remote server (Go Daddy), with FTP.

  Perfect. In this case, I won't even try to change you to use FTP in Dreamweaver under construction that will probably confuse you at this stage. In this case, go to "Remote Info" and make "None" - remove all credentials from here - we don't need configured in Dreamweaver if we do not use to it.

  2. because my changes are local, test files is local.  In fact, I normally disable the network connection, when I don't need open.

  Go to "Test Server" and make 'None' and delete all credentials - make it too empty. Given that you do not use the 'dynamic' services, we don't need to set up a. Your previews may occur through your browser to your "records the.

  3 go Daddy uses PHP on Linux servers for hosting.

  Well, Go Daddy also offers a variety of other options - but I guess you bought a configuration hosting Linux with PHP running on it. Let's not worry PHP here because you are using PHP for developing your site.

  4. because I'm not a fan of computer terminology, computers and computer configurations, I try to leave the default settings.

  The only thing you need to keep "like what" is your "local Info". Other than that, delete configurations of both 'Testing' and 'Remote '. You should go there without delay.

  5. I'm not sure of the requirement of test server.  A "dynamic" page descriptions are unclear to me.  My website uses,

  a. html,

  (b) a page of XML data to sort my photos.

  c. spry tables cascading,

  d. scrolling of the photo thumbnails.

  e. links to pdf files and

  f. contact email.

  A regular HTML site is usually "static" - as all the content you have in it is "hard coded" or "manuscript" in there. A PHP / ASP / JSP / CFM code is usually 'dynamic' - which means only the main template is usually done with the code. The content is retrieved from a database or from an external source. And this (to extract data from a database), such code must run on a server environment. This is the primary difference between 'static' and 'dynamic' Web pages. Do not enter into the details of what I'm not sure if this will confuse you more!

  If this is not clear, please see me website.

  http://envisioningmoore.com

• Help to change the code on the Admin, when you don't have the code.

  MY WIFE LEFT FOR ANOTHER MAN, OUR ONLY PC THAT I BOUGHT AND HAVE STILL IT WAS PUT AS AN ADMINISTRATOR AND IT DON'T ME NOT GIVE THE CODE, I CAN'T USE IT FOR MORE THAN THE BASIC FUNCTIONS. CHILDREN AND I WOULD LIKE TO USE WISELY IS THERE WAY ROUND THIS? YES SHE LEFT THE KIDS WITH ME ALSO... WISH ME GOOD LUCK

  All caps?  If you yell all the time, I can see how that might be weird.

  Code is equal to windows password?

  Because of the policies on these forums, we are not able to help you recover a password.

  Answers Support Forums password policy
  Keep secure passwords - Microsoft strategy on move the passwords

  Microsoft's official policy
  Microsoft's strategy concerning lost or forgotten passwords

  Given that only one resource useful that can be used for several scenarios can be found here.

  Also - you'd be surprised what googling "lost windows 7 administrative password" might turn up (without the quotes).

• Accidentally, I installed Windows 7 on my E drive. What are the issues I have if I change the drive letter c?

  Windows installed on the wrong drive

  When I installed Windows 7 I accidentally chose the wrong hard drive for installation: i.e. by car "E". "."  Since I am not accomsted to this hard drive I would rename it to 'C' drive, however, when I'm in disk management I get a message that if I change the name of some programs may not work properly.  Should I still change it and take a chance?

  You would be probably better to simply remake it. Rename the drive won't change anything that is mapped within programs that require objects in specific locations.

  I hope this helps.

• How change the code of the IDN in the browser?

  Q: how to change or ask to change IDN code in an area that uses special characters?

  It is not clear what you are trying to accomplish.  Y at - it a Web page url that doesn't work for you?  If so, what is it?  Or you host a site yourself with such a domain name and you have a problem with the way it appears in the browsers?

• This change should change the code which is locked by a model of translator.

  Hello

  I see a lot of the same questions.

  In my case however I do not use templates, or translators in my folder.

  I use several files included, but they have inside their head or body tags.

  The message popped up when I tried to convert this file:

  The international book of lymphedema: adaptation

  in Dreamweaver HTML strict xhtml 1 transitional.

  What can be the problem?

  Thanks in advance,

  Yvon

  I made the change without no problem, as you can see here.

  However, when I make the change, have a look at the errors that are created.

  When I change to HTML5 instead, have a look at the errors.

  Today the standard is HTML5, so I would stick to that.

  Apparently, there's a huge fest in Elburg, the days of kick. Was there two years before and well appreciated.