I have windows 7(64bit) and my hp Advisor has stopped working

Similar Questions

• Windows Media Player and Microsoft Office PowerPoint has stopped working.

  My laptop came with Vista installed. 2 weeks ago Windows media player has stopped playing video files that I receive by email. I tried to save the file to my desktop and play from there, but the same thing happens. He will play the first few seconds and then stops. In addition, Viewer PowerPoint from Microsoft office has stopped working. The error that says my anti-virus program may be the cause. I am currently using Norton Antivirus 2009.  I uninstalled Norton, but I still don't have the same error. All this happened after I downloaded and installed all the recommended Vista updates about 2 weeks ago.

  Hi anicho,
   
  Welcome to Microsoft answers community forum!

  I would like to ask a question to better understand:
   
  (a) what was the update has been installed?
  check the update to install and remove the most recent and check. Here is the link: http://www.microsoft.com/windows/downloads/windowsupdate/learn/windowsvista.mspx

  (b) what video format you are able to play on Media Player?

  You may need to do the following if you have not created a restore point

  Clean boot:
   
  This article describes how to start your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
      
  To perform a clean boot on a computer that is running Windows Vista, follow these steps.
   
  1. click on start, type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.
   
  If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.
  http://support.microsoft.com/kb/331796 . In addition, refer to the section on how to restore your computer to a Normal startup mode

  Try these steps after the clean boot and see if it works:
   
  Type command prompt in the start search box, right-click on command prompt and select run as administrator
  Type regsvr32 wmp.dll
  Press ENTER.
  There are also a few Fix it automate solutions on the Microsoft Fix It site, you might want to try:
  http://support.Microsoft.com/FixIt#tab6
   
  Alternatively, you can uninstall the Service Pack 2 (if you meant SP2 for updates) and check to see if it works
  Here is the link to uninstall: http://support.microsoft.com/kb/948537

  To download the stand-alone version of Service Pack 2 for vista follow this link: http://www.microsoft.com/downloads/details.aspx?FamilyID=a4dd31d5-f907-4406-9012-a5c3199ea2b3&displaylang=en
   
  Follow this link for more information about playing music and everything: http://www.microsoft.com/windows/windowsmedia/player/faq/playing_files.mspx
   
  And for Microsoft Office and the question from the Point of power, th e problem you posted is related to Microsoft Office and would be better suited to the Office Discussion groups. Please visit the link below to find a community that will provide the support you request.
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  I hope that this information is help!
  Let me know if it did

  Thank you, and in what concerns:
  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Display driver hangs on the computer and the error message "display driver NVIDIA Windows Kernel Mode Driver Version 306.97 has stopped working and recovered."

  Original title: NVIDIA Windows Kernel Mode Driver Version 306.97 display driver has stopped working and recovered.

  Hiya,

  I have recently installed Windows 8 Pro, installed all of my usual applications etc..
  The problem I've encountered is maintaining display driver crashing. Or have waiting periods. The exact error message reads;
  "Display driver NVIDIA Windows Kernel Mode Driver Version 306.97 has stopped working and recovered."
  Until now it expires randomly even when the computer is idle, and more frequently when I watch videos online. Also, watch a clip full screen on some sites like YouTube is ok, but on others, it is very laggy (updated maybe once per second the image) and the sound is out of sync.
  I can't find a way to properly uninstall the graphics driver.

  At least yours is working semi... I have the GTS 450 (uses the same drivers) and the mine does not at all... Stuck with the regular game pilot integrated ATM and can not all games... Microsoft told me to wait a few weeks and for the reminder and Nvida said 10 ways to uninstall and reinstall the drivers for same. Hope someone with to get a fix for this soon.

  Hi guys,.
  Looks like this isn't just me.
  Just an update, that I can not confirm it as a solution, but I have not encountered any problem (a little screenlag aside) since the installation of the drivers beta. For me, the beta version of the driver is 310.33, R130. The only other change to my system updates Adobe Flash version packaged with Google Chrome to 11.4.31X to 11.4.402 to eliminate serious problems when you watch the video in full screen.
  Information system;
  Operating system: Windows 8 Build Pro with Media Center 64-bit, 9200
  CPU: AMD FX-8150 eight physical cores
  GPU: ASUS NVIDIA GeForce GTX 560 TI
  Main hard drive: OCZ Vertex 3 120 GB
  It may be useful
  Edit: Still not falling down, 11/02/12, 4 days
  
  
  New edition;
  
  
  If you still receive the error message, try the following steps;
  Has. try to perform a clean installation of the driver.
  Download the latest drivers for your graphics card. Run the downloaded file, and select "Custom Installation". In the next screen, you will see a checkbox or similar labeled "Clean Install".
       
  
  You can do so by visiting nVidia Driver Downloads (www.nvidia.com/Drivers). Automatically detect the right driver or download using the form. The best way in my opinion is to use the GeForce experience, who will do anything for you in two clicks and a reboot.
  B. close all other programs
  It is possible that the error was caused by too many programs that need to use the resources provided by the graphics card/chip. It is also possible that a certain program caused a conflict that pilots crashed.
  You can try closing some currently open programs one by one and see if the error persists, or restart your system with disabled startup programs and allow them one by one to find the culprit. If the error is too persistent to do the above, it would be easier to start in safe mode option.
  More information can be found below
  http://support.Microsoft.com/kb/2665946/en-us

• Whenever I tried to run the Windows Media Center it says that it has stopped working and he's looking for solutions.

  Hello

  I installed Windows 7 this weekend with the offer of the student. Whenever I tried to run the Windows Media Center it says that it has stopped working and he's looking for solutions. Is it possible that I can download a fix or download the WMC for Windows 7?

  My computer (laptop) is a gateway T-6836 64-bit.

  original title: WIndows 7 media center has stopped working

  I upgraded to Win7 upgrade thestudent and my WMC keeps stopping whenever I try to open it. Is there a way to fix this or if I do a clean install of the operating system?

  This is the error I get:

  Description
  Stopped working
  Path of the Application of vulnerabilities: C:\Windows\ehome\ehshell.exe

  Signature of the problem
  Problem event name: CLR20r3
  Signature of the problem 01: ehshell.exe
  Signature of the problem 02: 6.1.7600.16385
  Signature of the problem 03: 4a5bd053
  Signature of the problem 04: mcstore
  Signature of the problem 05: 6.1.0.0
  Signature of the 06 problem: 4a5bda1e
  Signature problem 07: 1 a 1
  Signature of the 08:146 problem
  Signature of the problem 09: System.InvalidOperationException
  OS version: 6.1.7600.2.0.0.768.3
  Locale ID: 1033

  Additional information about the problem
  Bucket ID: 655435415

  When you see failing requests like this, even if you get it to work, you never know what's going to arise later.  I suggest to use the feature of easy to backup transfer all your data and do a clean install.

• I use windows 7 and auto start program has stopped working and I can't find a way to recover.

  I use windows 7 and auto start program has stopped working and I can't find a way to recover. Also, I was not able to transfer files on disk or any other storage device, their there on the computer and it says that they work very well, but I can't transfer anything to them.  They will play a disc or view data on a disc that has already been done but don't transfer to the drive if I want to add new files or data to it. Drag and drop is going through the motions, but shows red circle icon.

  [Moved from comments]

  Probably tell you autoplay?

  Control Panel > programs > default Prorams > Change AutoPlay settings

  Or

  In the search programs and files, enter, AutoPlay

• Microsoft Office Home and Student 2007 Setup has stopped working...

  I have a laptop Dell Inspiron E1505 with Windows Vista 32 bit Home Premium operating system on it.  I have all the updates/service Pack installed on it and I'm updating.  I use Microsoft Security Essentials for my anti-virus program, windows firewall for my firewall and windows defender as my software anti spy.  A few days ago I reinstalled Vista to do a clean install in order to restore my computer to its factory settings or the State.  I did this cause I wasn't able to get office 2007 installed or working properly, there are several problems I encountered.  So I reinstalled Vista and my computer works great now so I've updated everything that I could and then I tried to install Office 2007 on it with my installation CD and it comes up with the validation code and I type in and it works and it starts installing Office but at the beginning of the installation, it closes and a little window appears 'Microsoft Office Home and Student 2007 setup has stopped working' and It must be closed.  so I am not able to do anything with it at all.  is there something I can do?  would it be a bad CD? I don't understand.  I was able to get a new cd and just use my old product code to validate?  Help, please!

  I tried a few random things like get rid of AVG Free and adding to the security suite from microsoft, and by installing a high date, that I had to use the seven update analysis tool.  After I rebooted then am Office to install perfectly and all updates worked too.

• Reviews of Microsoft Windows that said that Dell Support Center has stopped working

  I get a microsoft windows notice that says: Dell Support Center has stopped working! Just guard arise each swconds little and will rise up to 70 or 80, if I don't keep delete them!  The clues how to solve this problem? He did this for at least a week now!

  Hello

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  _________________________________________________________

  or contact Dell technical support

  http://support.Dell.com/

  or Dell Support Forums

  http://en.community.Dell.com/support-forums/default.aspx

• When I close my mail a few seconds later notice appears and says direct mail has stopped working, then another notice appears and tells live reboot & for this mail what is happening?

  When I close my mail a few seconds later notice appears and says direct mail has stopped working, then another notice appears and tells live reboot & for this mail what is happening?

  Hi RobertKlaas,

  For a more specialized on issue of Windows Live Mail help, post your query on the Windows Live Forum.
  Windows Live Forum - http://windowslivehelp.com/

• Both ethernet and Wi - Fi connection has stopped working. When wireless stopped working,

  Both ethernet and Wi - Fi connection has stopped working.  When has stopped working wireless, disabled the wireless card and connected the laptop to the network with the Ethernet port.  Same problem, cannot access network. Market Diagnostics I get the message that indicates that the test has been able to network ping, but received no response.  When I try to ping the router I have 100% failure.  Other computers on the network are still working and able to connect to the internet.  The currency displays Manager Ethernet card and WiFi card works properly.

  Don't know what I had, but it was pretty nasty.  Did a restore of the system for a few weeks back, and when it restarted everything worked.

• The scientific and Technical Subcommittee module has stopped working

  The scientific and Technical Subcommittee module has stopped working. I can't find a topic for this query.

  Hello

  You'll be maybe lucky...

  http://www.bing.com/search?q=STSC+Inc&form=IE8SRC&src=IE-searchbox

  CSES Inc. is a company that distributes and supports a small programming language (APL == a programming language)

  http://www.stscinc.biz/

• I get the message: HP Advisor has stopped working. I have Vista 32 bit service pack 2

  I get the message: HP Advisor has stopped working. I have Vista 32 bit service pack 2

  Hello

  Contact HP support because it is their software problem

  http://welcome.HP.com/country/us/en/contact_us.html

  or ask in the Forums of HP Support

  http://h30434.www3.HP.com/

• Windows live component software plug-in, connect has stopped working

  Original title: boring

  Hi keep get a small box appears with "Windows live sign-in, add-in has stopped working". What is it you

  Hi WendySmyth,

  (1) when exactly you get this error message?

  (2) what is the complete error message you receive?

  (3) since when are you facing this problem?

  Method 1:  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

   

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  If the problem persists, you can post your query on the Forum Windows Live

  Windows Live Forum - http://windowslivehelp.com/

  Kind regards

  Ajay K

• "Cannot run the troubleshooter in windows' native hosts of diagnostics by script has stopped working".

  Original title: Troubleshooting work do not
  I can't run any programs of solving problems of the control panel. When l happens with diagnostics by native script host has stopped working. It offers the ability to debug and when you do, it says that there is no registered JIT debugger. How do l fix

  Hello

  Welcome to the community Microsoft and thanks for posting the question.

  By the description, it looks like you are unable to run any windows build-in the convenience store, he would be grateful if you can answer this question in order to help you further.

  Have you made changes on the computer before this problem?

  The issue could be due to the file system sdiagnhost.exe file is missing, sdiagnhost.exe is damaged or Corruption in the registry.

  I suggest you perform a sfc scan and check if this can help, the system (SFC.exe) File Checker tool searches for missing or damaged system files and repairs.

  Steps to perform a scan SFC:

  un) Click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow

  (b) type the following command and press ENTER:

  sfc/scannow

  [The command sfc /scannow. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions.]

  Once the scan is finished, close the command prompt window, restart the computer and check.

  Reference: http://support.microsoft.com/kb/929833

  Try to create a new user account and check if the problem is limited with the particular user profile.

  Create a new user account: http://windows.microsoft.com/en-US/windows7/Create-a-user-account

  If the new user account works, see steps on how to copy files to the new user profile in Microsoft article provided: http://windows.microsoft.com/en-US/windows7/fix-a-corrupted-user-profile

  If you have any other questions or you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Microsoft Windows error message: "Dell DataSafe 2.0 has stopped working".

  On my new laptop purchased recently, I get an error message from Microsoft Windows: "Dell DataSafe 2.0 has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available. "I then select the" close program"button to close the message.  But, no info additional re: a solution is always provided and within a few seconds the error message recurs, repeatedly.  It's maddening, it goes without saying.  My DataSafe account is current and operational.  I can't find any info on the site of Dell re support: this error, probably because it's a message of Windows...?

  But it's a Dell software!
  You look at not only their website, contact you them directly.

  Contact Dell: http://support.dell.com/

  See you soon. Mick Murphy - Microsoft partner

• How can I fix windows 7 Catalyst control center host application has stopped working

  I received the error: Catalyst Control Centre: host application has stopped working. I uninstalled the Device Manager Catalyst Control Center and restarted - after uninstall and reboot I got the same message saying: Catalyst Control Center: the host application has stopped working - I also checked for driver updates in the Device Manager and the device manager says my driver updates are up-to-date.

  I just received a response from AMD for a known issue with Catalyst Control Center and Windows 7.  You can go there.  It worked for me the first time after a lot of troubleshooting.

  How to solve the CCC is not loading/opening at initialization.

  Scenario: the user tries to open/load the CCC through different methods, but it does not load. The problem may occur without any changes to the system or a Catalyst driver update or reinstall. This is issue mainly affects Windows 7 machines.

  Cause: possible corruption of the Windows Global Assembly Cache (GAC). Usually, this requires the user to format and reinstall Windows.

  Resolution: this solution has been tested - reproduced and resolved.

  Remove all the ATI through programs and features in Control Panel using the Manager to install Catalyst (GPC). Restart the system in safe mode and follow these steps:

  -Remove all ATI C:\programs files files and the C:\programs files (x 86)

  -Go to the C:\Windows\assembly and sort by "public key token. Locate the following key token public "90ba9c70f846762e" which is

  -associated with ATI. Usually only 2 entries. Remove 2 entries. Note: entries should be deleted (right click and select uninstall) since regular safe mode

  -mode may cause a permissions error. 2 entries appear only in the systems concerned by this issue. This means that you want the 2 inputs on systems where the CCC charges, the entries do not exist.

  -Close and restart normally.

  -Reinstall the ATI Catalyst package.

  I hope that you will get in working order!