Both ethernet and Wi - Fi connection has stopped working. When wireless stopped working,

Similar Questions

• "Remote Desktop connection has stopped working" problem on Windows 7.

  When I try to connect to one of my Windows 2003 servers from my Windows 7 Ultimate pc, I get an error:
  "Remote Desktop connection has stopped working". It has something to do with the NLAapi.dll. If I rename this dll, TS works very well. I used the dll from another computer running Windows 7 RC and it works too, but in one of these two cases, while it corrects the TS connection, it causes other errors, maily with the network and sharing Center. Long story short, I think that there is a bug with nlaapi.dll. I can connect properly to my boxes of Windows XP SP3 servers. I ran all the updates on my 2 k 3 box, but still does not work.

  Here is the log of the event viewer:

  Name of the failing application: mstsc.exe, version: 6.1.7600.16385, time stamp: 0x4a5bce80
  Name of the failed module: NLAapi.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdfc9
  Exception code: 0xc0000005
  Offset: 0x000000000000c138
  ID of the process failed: 0xf90
  Start time of application vulnerabilities: 0x01ca55cc39bf05f0
  The failing application path: C:\Windows\system32\mstsc.exe
  Path of the failing module: C:\Windows\system32\NLAapi.dll
  Report ID: 7772b4f0-c1bf-11de-bfa2-001d60a28de8

  Hi dekopolis,
   
  Thanks for visiting the site of the community of Microsoft Windows 7. The question you have posted is related to the Server 2003 and would be better suited in the Community (Insert here). Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/categories/ Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Remote Desktop Connection has stopped working since 7 for 2008

  Hello

  Dears I have strange problem and I have read everything discussed here, but it's not helping

  I have asus laptop with Windows 7 Home x 64 N53SM

  everything beautiful, and up-to-date

  Remote Desktop works well also

  one problem I can't use desktop remotely from my laptop to any server that is running windows server 2008 exactly... .other version 2003 work ok

  When I try to access to any server ruin win 2008 Server and put the server ip and password user name years and hit enter I see the error message

  Remote Desktop Connection has stopped working and computer laptop freez second then back with this message

  (Remote Desktop Connection has stopped working)
  A problem caused program stop working correctly
  Windows will close the program and notify you if a solution is available

  This is the complete log of the event viewer

  Results for: Microsoft product: Windows operating system; Version: 6.1.7600.16385; Event ID: 1000. Event source: Application error;

  ===========

  Name of the failing application: mstsc.exe, version: 6.1.7601.17514, time stamp: 0x4ce7ab44
  The failed module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
  Exception code: 0xc0000374
  Offset: 0x00000000000c40f2
  ID of the process failed: 0 x 1418
  Start time of application vulnerabilities: 0x01cd48bcf13be48a
  The failing application path: C:\Windows\system32\mstsc.exe
  The failed module path: C:\Windows\SYSTEM32\ntdll.dll
  Report ID: 39102a22-b4b0-11e1-a89a-005056c00008

  ===========

  Please help me to solve this problem without need format :)

  Hello

  As you try to desktop connection remotely from Windows 7 to Windows Server 2008, it would be preferable to send the same in the Technet community for more help.

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

  Hope the information is useful.

• The scientific and Technical Subcommittee module has stopped working

  The scientific and Technical Subcommittee module has stopped working. I can't find a topic for this query.

  Hello

  You'll be maybe lucky...

  http://www.bing.com/search?q=STSC+Inc&form=IE8SRC&src=IE-searchbox

  CSES Inc. is a company that distributes and supports a small programming language (APL == a programming language)

  http://www.stscinc.biz/

• When I close my mail a few seconds later notice appears and says direct mail has stopped working, then another notice appears and tells live reboot & for this mail what is happening?

  When I close my mail a few seconds later notice appears and says direct mail has stopped working, then another notice appears and tells live reboot & for this mail what is happening?

  Hi RobertKlaas,

  For a more specialized on issue of Windows Live Mail help, post your query on the Windows Live Forum.
  Windows Live Forum - http://windowslivehelp.com/

• Microsoft Office Home and Student 2007 Setup has stopped working...

  I have a laptop Dell Inspiron E1505 with Windows Vista 32 bit Home Premium operating system on it.  I have all the updates/service Pack installed on it and I'm updating.  I use Microsoft Security Essentials for my anti-virus program, windows firewall for my firewall and windows defender as my software anti spy.  A few days ago I reinstalled Vista to do a clean install in order to restore my computer to its factory settings or the State.  I did this cause I wasn't able to get office 2007 installed or working properly, there are several problems I encountered.  So I reinstalled Vista and my computer works great now so I've updated everything that I could and then I tried to install Office 2007 on it with my installation CD and it comes up with the validation code and I type in and it works and it starts installing Office but at the beginning of the installation, it closes and a little window appears 'Microsoft Office Home and Student 2007 setup has stopped working' and It must be closed.  so I am not able to do anything with it at all.  is there something I can do?  would it be a bad CD? I don't understand.  I was able to get a new cd and just use my old product code to validate?  Help, please!

  I tried a few random things like get rid of AVG Free and adding to the security suite from microsoft, and by installing a high date, that I had to use the seven update analysis tool.  After I rebooted then am Office to install perfectly and all updates worked too.

• I use windows 7 and auto start program has stopped working and I can't find a way to recover.

  I use windows 7 and auto start program has stopped working and I can't find a way to recover. Also, I was not able to transfer files on disk or any other storage device, their there on the computer and it says that they work very well, but I can't transfer anything to them.  They will play a disc or view data on a disc that has already been done but don't transfer to the drive if I want to add new files or data to it. Drag and drop is going through the motions, but shows red circle icon.

  [Moved from comments]

  Probably tell you autoplay?

  Control Panel > programs > default Prorams > Change AutoPlay settings

  Or

  In the search programs and files, enter, AutoPlay

• Audio and video files that has already worked on my computer no longer works.

  Audio and video files that has already worked on my computer no longer works and I get one of the three messages which are as follows:

  (1) the file can be used (but it is not used by another program, and then media player that I use to try to read the audio/video file)

  (2) you may not have access to the location of the file (and yet I am the administrator of the computer, I am the only user with access to the computer and I installed the files myself and they have worked fine up until now.)

  (3) your proxy setting may be incorrect (I use automatically detect my proxy settings that is the same settings I use for my network and the Internet.)

  All of the files in question worked previously but now continue to show these problems. If anyone can give me any information as to how I can get these files restored to their values of work please feel free to respond below or send a personal email with your solutions to * address email is removed from the privacy *

  Yours,

  Brent

  Hi Brent,

  You can try to uninstall last updates window who installed or do a system restore to a point before the updates have been installed and then install updates one by one to see which update is causing the problem.

  Method 1:

  You can read the following article to remove an update.

  Remove an update

  Method 2:

  If you cannot uninstall the updates, then you can try to perform a restore of the system to a prior restore point you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  System Restore: frequently asked questions

  Method 3:

  Try to install updates one at a time to see the update is causing the problem.

  Install Windows updates

  Hope this information is useful.

• I XI Acrobat pro, under comment > markup drawing the cloud, the polygon, gum and the line connect do not work. Eraser is visible, the rest are hidden a bit. all solutions?

  I XI Acrobat pro, under comment > markup drawing the cloud, the polygon, gum and the line connect do not work. Eraser is visible, the rest are hidden a bit. all solutions?

  You must disable the Touch Mode, with the toolbar button or the preference of the user: Edit > preferences > General > Mode Touch > never

• ArcSoft Connect has stopped working properly

  What should I do to fix my arcsoft promble

  'stopped working' or 'stopped working '?
  Was there an error message?
  What happened that pushed you to conclude that "it has stopped working properly?

  Check to see if it works at all the...
  Assuming you are using Vista:

  Start > in the search box, type services > press the Enter key > scroll to ArcSoft Connect..., click on it >
  topic status, it must be said... Has begun
  under Startup Type, it must be said... Automatic
  If it does not say that, right click on ArcSoft Connect... > properties >
  in Startup Type, click on the pointer to the right and change it to automatic
  to the service status, click Start
  Click OK for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• System hangs and displays that Windows has stopped working with a dialog 'extended attributes are incompatible. "

  original title: Mr

  Since the installation of Spyware Doctor, I've known crashes & Windows problem report has stopped working.

  and a dialog box "extended attributes are incompatible."

  I can't access features, etc., programs and support, help window. Y at - it an easy fix or should I

  request Spyware Doctor? Also cannot access the microsoft games.

  Robarm

  Hello

  try a system restore before the installation of spyware doctor

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  also run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

• I have windows 7(64bit) and my hp Advisor has stopped working

  Hello

  I have windows7 (64-bit) .my hp Advisor and my hp support assistant has stopped working.

  I have hp pavilion dv6t-2100 CTO

  Thank you

  have you updated or check updates from your support page and product drivers?...

• Windows Explorer (NOT IE) freezes and say that Windows has stopped working.

  I'm constantly Windows Explorer has stopped working error whenever I try to use it.  I can open the Windows Explorer, but I can't click on search of files or a file or folder without this error and I have to use the task of the Manager close.  The same thing happens when I use MyComputer and try to access the files in this way.  I have XP Home Edition.  I have no way to access my files now that the command prompt window.  I ran my anti-virus (Norton) and he did not find anything.
  Any suggestions?

  The first Question of troubleshooting: If the problem is new, what has changed between the time things worked and the time they do not have?

  The second issue of Windows troubleshooting: what is the status of virus/malware of the machine? If you think it's clean, what programs (and versions) allows you to determine this?

  Make sure that the computer is clean (Norton alone is not enough):
  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  If the computer is clean, try the boot minimum troubleshooting to see if something works in the background is the culprit.
  Clean boot in Windows XP - http://support.microsoft.com/kb/310353
  Boot minimum troubleshooting Windows XP - Advanced http://support.microsoft.com/kb/316434
  MS - MVP - Elephant Boy computers - don't panic!

• Module of persistence and Windows Media Player has stopped working Vista

  I get a message when I reboot the persistence module has stopped working. Windows Media Player has also stopped working.

  Hi Greg,.

  Since when are you facing this problem?

  Method 1: Run the fixit available in the article below

  When I try to use Windows Media Player 11, the program does not start, or some UI elements are blank
  http://support.Microsoft.com/kb/925704

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

   

  Method 3:  Select the boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Your double post, I see you have a codec problem

  Method 4:  Download and install the codec, see the link below to do this:

  Codecs - frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

• Windows live component software plug-in, connect has stopped working

  Original title: boring

  Hi keep get a small box appears with "Windows live sign-in, add-in has stopped working". What is it you

  Hi WendySmyth,

  (1) when exactly you get this error message?

  (2) what is the complete error message you receive?

  (3) since when are you facing this problem?

  Method 1:  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

   

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  If the problem persists, you can post your query on the Forum Windows Live

  Windows Live Forum - http://windowslivehelp.com/

  Kind regards

  Ajay K