I just bought this computer and wonder if I can use it without using the wireless part.

Similar Questions

• I own a windows computer and now a mac can also install LR5 with the same serial number on both?

  I own a windows computer and now a mac can also install LR5 with the same serial number on two computers?

  I'm not sure but based on the selections of purchase stating you can buy for Mac and Windows for equal opportunities of purchase you are able to install and activate on two different platforms using the same serial number.  I know that this is the case with the purchases of items but Lightroom does not seem to come as often.

• If I bought apple product from amazon America I can use the warranty in europe?

  If I bought apple product from amazon America I can use the warranty in Europe?

  Is suspect is the answer, it depends. The warranty provided with the product or on the link referenced in the package.

  TT2

• I have 12 items, running on PC. You just bought a Mac mini, not DVD, how can I get elements on the Mac?

  I just upgraded from a Pc to a Mac mini, how do I get 12 items to the Mac?

  Try this link and after installing, you can confirm with your 24-digit serial number - click here to download PES

• Windows 7 stuck on the automatic update 2 of 5. JUST bought this computer... now what?

  I bought this new laptop yesterday, has a great for about 24 hours. I went to turn off today (Shut Down) and he said that I have updates to do, ok... no problem. He began to install the updates, updated, it took about 15 minutes. but its 2 of 5 for several hours now. What he says not turn it off or disconnect - then, what can I do?

  Someone please help!

  Hi coastemac,

  You can read the following article and try the steps and check if that helps:

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/949358

  You can also check out the following link and try the steps by Mickyo posted Wednesday , July 29, 2009 01:37 to rename pendig.xml

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/2f70b13c-9db4-4bf9-90EE-7ca63a809973

  Hope this information is useful.

  Boumediene. K.
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I bought this computer and there windowvista how to change password of ADM when I don't know the old one

  I bought this pc on ebay it has windows vista I dony are called admimistratorpasswor or user now, I have a pc I can not use and I don't know what to do about this

  Hello

  If you have a Windows Vista disk installation, see the following article.

  How to use system restore to log on Windows 7 or Windows Vista when you lose access to an account

  Unfortunately, beyond that we can not help you. Please review the following policies for these forums and Microsoft.

  Answers Support Forums password policy

  Keep secure passwords - Microsoft strategy on move the passwords

  Microsoft's official policy

  Microsoft's strategy concerning lost or forgotten passwords

  You can contact the resolution Ebay seller.

  Concerning

• I bought this computer and now all of a sudden it says that windows vista does not work and tells me to enter a product key number and I did it and he said that he does not work__

  I need help

  Please help me solve this problem, I don't think I should buy another program when it worked very well. very upsetting

  If Windows Vista application activation unexpectedly on rare occasions, you may be prompted to activate Windows Vista on a computer that did not previously require Windows Vista activation or has already been activated successfully. For example, this may occur on a computer on which Windows Vista was preinstalled by an OEM installation or Volume licensing and are major hardware changes occurred, such as upgrading the hard disk and memory at the same time.

  If you are prompted to reactivate Windows Vista, you can do this by using the Windows Activation Wizard to:

  1. Click Start
     

     and then click computer.

  2. Click System Properties on the toolbar, and then click click here to activate Windows now in the Windows activation area.
     

     If you are prompted for an administrator password or a confirmation, type the password, or click continue.

  3. Select the Windows Vista activation method that you want, and then follow the instructions.

  To avoid this problem in the future, obtain the latest service pack for your version of Windows Vista, either through automatic updates or direct download.

  To update to Windows Vista and prevent this activation problem does not happen:

  1. Click Start
     

     Click all programsand then click Windows Update.

  2. Click find updates.
  3. As soon as Windows Vista found the updates, click the install updates button.

  http://support.Microsoft.com/kb/940315

• I had my 7 reinstalled windows on my computer and I was able to activate it without writing the product key.

  Hello.

  I decided to reinstall my OS Window 7 64 bit earlier. I took my computer to a local computer store and they have reinstalled for me. After reinstalling, I was told that I need to activate my Windows 7 as soon as possible by dialing a number they gave me. When I got home, I opened Windows and he went to control panel / system where I found the part windows activation. Well, I clicked to activate Windows 7 and she did it without asking me for a product key or command me to use the phone activation! As part of the Windows activation, it reads now that my Windows is activated. Is this normal?

  My operating system to Windows 7 64 - bit is an OEM license that I got when I bought my computer a few years ago. When I took my computer to the store for reassembly, they do not have to remove or change no matter what hardware on my computer, they have just reinstalled the operating system. The store where they were doing the resettlement was NOT the same store where I orginally bought my computer. As I understand it, a Windows with OEM license is activated on one computer so I was quite surprised that I didn't have to call the activation number or enter the product key.

  Is it normal for a sub - OEM license of Windows 7?  My WIndows 7 it is operated properly or I do something?

  Thank you for your help.

  Partial product key: D4TRY
  License status: licensed

  
  
  your windows is activated but not yet posted
  Please go here and validate. When she passes will be offered microsoft security essentials and IE9. you don't have to take them.

  http://www.Microsoft.com/genuine/validate/

• I just bought a 6 d. is it possible to use the grid in other than the auto mode?

  I just buy a 6 d.  Is it possible to use the grid in other than the auto mode?  Also, is there a way to use the self-timer in other than the auto mode?

  Thank you very much. I look forward to your comments.

  I have to assume that your camera came with a manual you need to rely on. In my manual for my 7 d Mark 2 the index near the end of the manual lists the applicapable pages for whatever this is relating to the use or other people. Grid is under G, Self Timer is under S and called "self-timer."

  If you use a computer based pdf to see the info it will probably be several pages listed, but you can click on a page number to get to it rather than scroll to it.

• I just bought this product and when I click on file PDF EDIT I just opened in Adobe Reader MS it jumps back to buy... ZUP?  I saw an ad in a week without response

  any way to talk to in person support?

  Your problem is that you have subscribed to a new, different from the app (Acrobat Pro), but still use the old free app (Acrobat Reader).

  You must

  1. download Acrobat Pro.

  2. installation of Acrobat Pro.

  3. make sure that you are using Acrobat Pro.

• I bought another computer and install adobe CC can´t

  I bought a 3 surface and set up a Surface Pro 3 after installing Adobe CC and now I can´t photoshop open Surface Pro 3 because apear it's instaled in 2 machines, what can I do now? Is it possible to cancel the lhe another installation?

  In the same window pop up, look for the option "disconnect all computers.

  Select the option and to proceed with the activation process.

  This does not alter the CC of the computer apps, it will be a few signs on the activation of the previous computers.

  It by resetting the Activation count to 0, so that you can activate apps new CC on any of the 2 computers of your choice.

• I'm upgrading from my memory and wonder what I can use...

  Setup: HP Pavilion p7 - 1370 t.

  Windows 7

  Motherboard of Carmel (single channel architecture)

  I want to upgrade to 8 GB but cannot pick up a good set of 2 x 4 GB and edge... at the same time I was wondering the performance of memory dual channel single channel iron starters:

  http://www.Newegg.com/product/product.aspx?item=N82E16820231428

  It will work, and it will operate a maximum capacity?

  Thanks in advance...

  Hello

  The memory that you have selected

  "G.SKILL Ripjaws X Series 8 GB (2 x 4 GB) 240 - Pin DDR3 SDRAM DDR3 1600 (PC3 12800) desktop memory model F3-12800CL9D-8GBXL.

  works perfectly according to the configuration of the memory of your PC.

  Memory Must select one of the following options:

  • 4 GB (2 x 2 GB) DDR3 PC3-12800 (turns the PC3-10600 with Sandy Bridge CPUs)

• Do I just update iphoto 8.1.2 so I can use the cloud?

  I don't know if it is possible to simply update the photo program so that I can access the cloud or if I need to update the entire operating system.

  Photos is not a separate application, but is integrated into the operating system and you can install it only as part of the operating system - Yosemite and most recent - current version is El Captain OS X 10.11.6 and Photos 1.5

  LN

• How to use the middle part of the audio that I imported instead of having it starts to run and play?

  I tried to start making animations and I want to only use the middle part of the audio, but when I add the audio in the chassis he makes me do the beginning of the part of the audio rather than take a specific part of the audio and put it in, so my question is how can I use only a specific part of the audio without the start of the game?

  You can use actionscript (check the class sound - in particular the method of reading) to start your sound anywhere you want:

  s var:Sound=YourSoundsClass();

  s.Play (specificpartinseconds);

• I am a registered owner of Lightroom 6 but my old computer (PC) is dead and is seemingly irreparable... I just bought a MacPro and would like to know if it is possible to download the Mac version 6 on it without having to pay for another license.

  I am a registered owner of Lightroom 6 but my old computer (PC) is dead and is seemingly irreparable... I just bought a MacPro and would like to know if it is possible to download the Mac version 6 on it without having to pay for another license.

  Hi Charlay,

  Yes, you can download Lightroom on your Mac computer from this link: Install Photoshop Lightroom

  And you can then activate Adobe programs on two machines, you will be able to activate it without having to buy it again.

  Kind regards

  Claes