I just installed two new dvd optical drives in vain the drivers for them are not on my pc as two previous albums. So, how completely relaoding Windows 7 ultimate aopart can do?
I have two optical drives fail on my pc which is a quad core, an run Windows7 Ultimate.I have installed two new sata drives, but they do not work. How can I get the drivers for these optical drives so I can use them. One of them is a blu ray player?
CD/DVD driver does not work after the upgrade.
1) press the Windows key + x , and then select the Command Prompt (Admin)
(2) then, at the command prompt, type the following (you can copy and paste) and press "enter":
Reg.exe add "HKLM\System\CurrentControlSet\Services\atapi\Controller0" / f/v EnumDevice1 /t REG_DWORD /d 0x00000001
(3) restart the computer.
Tags: Windows
Similar Questions
-
I have a new computer with windows 7 Home premium. just installed my Presentation adobe acrobat 6.0 standard, the installation as a warning code 20225 appeared? I also noticed that my residence PDF printer is missing? You can help me solve the problem. Bren
Versions of Windows beyond Windows XP are not entirely compatible with Acrobat 6. The first version of Acrobat that is supported by Windows 7 is Acrobat 8.1 (is no longer licensed by Adobe). The latest version of Acrobat: Acrobat Columbia, six versions more recent than Acrobat 6. You need to upgrade to get all the features of Acrobat.
-Dov
-
Hello
How can I install Windows XP Setup (F6) use an instead of a floppy drive usb flash drive to find the drivers for a disk sata hard.
Kind regards
ImaneHi Mike,.
You can not install it. This must be done using the floppy drive. This feature is available for Vista and Windows 7.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Dell Dimension 2400 with XP.
mjcandlec1,
Welcome to the forums. Firstly (and this is just my personal opinion) you can actually have a bit more large partition for the operating system. Just to receive the updates and service packs and other.This article will show you how to change the default location of My Documents. Also when you install programs then ensure you that you change the default installation directory, it will try to go on the C: drive.
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
When I try to launch Photoshop CS5, I get an error code 6. Is there a way to uninstall Adobe Suite from the old C: drive.
Remove your ssd drive you old c drive returns on your c drive.
then uninstall all over it. In addition, clean your adobe files use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6
install your ssd drive and install your applications.
-
I just install an update of CH CC and my images in RAW format are not read correctly
Do I return has an older version
Claude
Thank you pour your answer, I googled why I had a wrong result. Done en I had the setting of bit depth to 16 bits instead of 8.
I consider that the problem is solved
Sincerely Claude
-
I just installed a new hard drive. and reinstalled a clean copy of Windows 8.1. Windows 10 waiting to be installed. I have licensed copies of Photoshop CS6, Lightroom 5 and 12 elements with Acrobat Standard. The Adobe programs are now asking to be uninstalled and reinstalled I can understand. However, should I do before moving on to Windows 10?
Yes
-
HP pavilion G4-2201tu: Add a 2nd HARD drive using CD/DVD optical drive Bay
Hi ch, I, m going to add a 2nd HARD drive of my laptop bu using Bay, CD/DVD optical drive, so I don't know if the connection of optical drive supports SATA 2 or SATA3? And where I can buy a Bay for disk HARD 2 (good quality)? TKS a lot!
There is that some members have used and reported success with third party products. I can't recommend any particular HARD drive caddy product as I have no personal experience using one. I can provide you with a URL so you can decide for yourself. I will update with more sources as I find them.
http://hddcaddy.com/en/12-HP-HDD-Caddy
http://www.newmodeus.com/shop/?Main_Page=index&cPath=2_27
Your laptop uses a SATA interface for the HARD disk and the optical drive.
-
Hello
I just installed a new router and now my desktop running xp computer does not connect to the internet. I know that it is not the router because I plugged the cable into my laptop running 7 and it works fine. When I try to dhcp I get 169..., when I put manually the IP just get no access to the internet and can not ping to the router address. I tried to run the net work Assistant, emptied my dns, disabled all firewals, still nothing.Any suggestions?original title: connectivity LimetedThe zero configuration utility works very well. But it is a desktop computer and on cable. All other wired and wireless PC in the office is working well, then it's definitely this PC. He came out of nowhere, I install a network printer on the PC but that's all.
Your messages are a bit terse, but if I understand correctly
- You have a router connected to the Internet and multiple computers connected to the router, some Ethernet cable and others by wireless.
- All but one of these computers can reach successfully from the Internet via the router.
- A computer that can't browse the Internet is connected to the router via an Ethernet cable.
- You disconnected the cable between the router and the desktop problem and connected it to a Windows 7 laptop and the laptop connected to the Internet via the router.
- You haven't seen any error message (except, perhaps, a message on "Limited or no connectivity").
- You have installed Windows XP Service Pack 3 (or at least Service Pack 2)
Assuming that all the foregoing is an accurate summary of the situation, I suggest that you do the following:
Open a command prompt window (start > run > cmd > OK)
Type the following lines and press ENTER after each lineNetsh reset winsock catalog
netsh int ip reset c:\resetlog.txtClose the command prompt window and restart the computer.
-
I just installed a new SSD and I want to spend my Lightroon 6.3 on it. Do I have to re - download and re-install and if yes how can I do?
Hi David,
Just to add to what Rachel suggested, you will help to uninstall and reinstall the application.
You can follow the article: Uninstall or remove Adobe Creative Cloud applications and download and install Adobe Creative Cloud applications that will help you to uninstall and reinstall the application.
Let us know if it works or not.
-
HP 15r-250tu: cannot install the drivers for the new laptop
Hi expert, I bought a new laptop from hp 15r-250tu. I installed windows 7 ultimate (64-bit) service Pack 1. Cannot install the drivers for my laptop.i IAM downloaded all the drivers available on the site of hp for this model laptop.i tried to install them in the order as the mentioned error messages, but get that my phone does not support these drivers. Please answer me with links of driver and sequence to install. Thank you.
Hello:
Use the W7 x 64 drivers for the HP 250 G2 on your model except file BIOS, firmware, wireless and bluetooth.
http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5449369&swLangOid=8&swEnvOid=4059
Wireless:
Bluetooth:
http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_149791_1
-
DVD ROM drive missing from the Explorer
I installed nero burning rom on vista and then the dvd rom drive disappeared from the Explorer. When I went into the Device Manager and checked my dvd rom for the solution properties, it says that the driver could not load and that Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19). How can I recover from this issue now? I don't want to reinstall vista or uninstall nero. But I want that this CD-ROM drive back in the Solution Explorer. What can I do or how I should do? I need a step by step procedure that can solve this problem.
Try running the Fixit:
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116You can also follow the instructions under "fix it myself", Windows 7 from Windows Vista.
Important: The instructions, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows
http://support.Microsoft.com/kb/322756 -
PowerDVD dx says no disc in the dvd rw drive even if the drive is present
Cannot use dvd rw drive will not play movies on dvd or CD
Have you tried using a cleaning kit to clean the optical drive? Lasers get dirty and cannot read the disc.
Open the Device Manager and try to update the drivers for DVD
Right-click on my computer and select Manage
Select Device Manager
Click + next to CD-ROM/DVD-Rom readers
Right click on the menu item drop-down and select put to update driver
Close Device Manager
Try again DVD
If the update does not work, right-click on the drive and select uninstall
Close the Device Manager and restart the computer
Try this fixit
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
..... Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052
Good luck.
-
In Device Manager, my CD-ROM/DVD-ROM drive has a yellow triangle with an exclamation mark inside. I tried to use the online solution to correct, but it does not find a solution. I also tried to update the software, but no luck there. Help, please.
Thank you
iSavageFirst thought: try reading the Windows Installation DVD. If it works, then your player works properly, at least a little.
Next: You tried to update the drivers for the CD/DVD in Device Manager? Generally, Windows is plug and play for this type of devices. This means that if you install, Windows will load the proper drivers and they will work.
So-
If you have restarted?
Did you test the drive?
Try to uninstall the driver in the device and restart Manager.
Have you looked in the BIOS to see if the CD-ROM drive is activated?It is generally true that a yellow triangle mean a driver problem.
That it should be fixed by uninstalling the driver and restarting.If you still have problems, post ack with more details and we'll see what we can do for you.
See you soon!
-
Just bought a new Apple computer. What is the best way to transfer the CS6 and Lightroom
Just bought a new Apple computer. What is the best way to transer CS6 and Lightroom? Both applications have been updated. Should I reinstall it on the Adobe site?
first of all, if you're going to retire this old computer or, at least, no longer use your adobe on this old computer programs, open and click Help > deactivate.
then install your files to your new computer and activate. If you already have an installation cd, you don't need to download. If you don't have the installation files, download the trial and activate it with your order number.
Maybe you are looking for
-
When I use keywords in the address bar, I am directed to a page instead of results.
I always use (its set to Google) keyword search bar, but sometimes, instead of search results, I am sent to directly to a page based on what is most like my keywords. Is there a way to stop this, so I get a list of search results?
-
Pair of M30 - 604 with installing identical software - Modem gets Error 633
Hello I have a pair of Satellite M30 604 s running Microsoft Windows XP SP2, the same Office 2003 Enterprise, Norton SystemWorks 2005 software. All was well at least the last 6 months. I recently installed Norton GoBack part of SystemWorks, this may
-
HP 15-g009ax: shortcut keys work not
respected Sir/Madam, I encountered a problem with my funtion shortened as fn + f3 and fn + f8 etc... they are does not not and does not and I installed windows a return of the day. I can't increase or decrease my volume and shine with these keys. I u
-
Generate 2 Trains of pulses with different frequencies and Heavy duty with a PCI-MIO-16XE-10
Hello I use a Board PEAK-MIO-16XE-10 DAQmx with LabView 8.6 to run a door for a piece of equipment controller. I need to create 2 separate, all pulse trains both trigger simultaneously, each with their own cycle frequency and duty. So far, I can crea
-
can't turn off computer, unless I push off button Manual.
by clicking on start > by clicking on Disable button > I get the pop up. clicking on turn off, nothing happens. Pushing the button power off it will turn off.