I'm constantly a msg - malware has been detected, click here to protect your computer. Their icon in my toolbar is, when you bring the cursor, it says protection against spyware.

Similar Questions

• This operation has been cancelled due to restrictions on your computer. Please contact your system administrator.

  Title: original operation canceled
  When I start right click then properties, this happens "this operation has been cancelled due to restrictions on your computer. Please contact your system administrator. "Same thing happens when I click on the taskbar and Start Menu. Also, there are very few programs listed in the start menu. Can someone find it?

  If you see things like this:

  You do not have sufficient security privileges to restore your system.
  The System Restore tab is missing from the my computer properties.
  System Restore has been disabled by group policy.  To turn on system restore, contact your domain administrator.
  The System Restore tab is available, but the turn off System Restore (disabled by Group Policy) box is grayed out.
  The task manager has been disabled by your system administrator.
  The registry editor has been disabled by your system administrator.
  The task manager has been disabled by group policy.
  The registry editor has been disabled by group policy.
  The command prompt has been disabled by your administrator.  Press a key to continue...
  The operation has been cancelled due to restrictions in effect on this computer.  Please contact your system administrator.
  The "Run" option is missing from the start menu.
  The option "Log off."... ' is missing from the Start Menu.

  The usual advice are something in the sense of "something has been disabled in the group policy...". ", and it is probably true that something has been disabled, but you know what something is and what it takes to do about it.

  If you are using XP Home Edition, you will get away with advice to use the Group Policy Editor, since it has no Group Policy Editor in XP Home and only
  really does not tell you where to look in group policy, even if you run the Group Policy Editor.

  You need a complete solution that works for all versions of XP and requires no hunting around in the Group Policy Editor or registry to find where things are that have been disabled.

  Unless you have disabled these things on purpose, chances are good that your system has a malware infection.  The malware knows what tools you use to try to find and remove, for the malware disables the things you are more likely to consume and prevents them from running if you can't find the malware and remove it.

  If your system has this kind of affliction, all malicious software tools you currently use or have used failed to protect your system so that you can expand your horizons malware detection and prevention to prevent these kinds of afflictions in the first place.

  The malware will be happy you trick into thinking that you need to so something drastic to fix your system - as a facility repair, system restore point or a total reinstallation of XP.  This is what it would be like you, but these measures are not necessary.

  You must solve the immediate problem of the tools does not, then scan your system for malware when you are finished.

  No matter what kind of malware you've used analytical tools, they are unlikely to solve this problem, because they cannot tell if the changes made to your system have been on purpose (you or an administrator who makes them) or some malware changed them, so the analysis tools will let these things alone (it's usually a good thing).

  If your system is afflicted in this way, there are probably other things that also do not work - like the registry editor, System Restore and the command prompt, so fix them all at once even if you have not discovered they are broken again.

  These commands from registry removes the registry entries that are stop opening programs.  Although the registry entries do not exist, these commands are safe to run and will work for all versions of XP.

  Before making any changes to your registry, back up the registry with this free and popular tool:

  http://www.SnapFiles.com/get/ERUNT.html

  Open Notepad to create a new text file:

  Click Start, run and enter in the box:

  notebook

  Click OK to open a new Notepad file.

  Copy and paste the following lines of text into the new Notepad file.

  Windows Registry Editor Version 5.00

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableTaskMgr" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableRegistryTools" = -.
  [HKEY_CURRENT_USER\Software\Policies\Microsoft\Windows\System]
  "DisableCMD" = -.
  [HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem\\\]
  "DisableTaskMgr" = -.
  [HKEY_USERS\.default\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableTaskMgr" = -.
  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
  "DisableCAD" = DWORD: 00000000
  [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\SystemRestore]
  "DisableConfig" = -.
  [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\SystemRestore]
  "DisableSR" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoRun" = -.
  [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoRun" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoClose" = -.
  [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoClose" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoSetTaskbar" = -.

  Save the new text file with extension .reg on your desktop or somewhere you can remember with a name you can remember, something like:

  enableit.reg

  After you save the file, close Notepad.

  Locate the file enableit.reg on your desktop and double-click it.

  Alternatively, you can right-click on the enableit.reg file, choose open with... and select the registry editor.

  Answer in the affirmative to the question... Are you sure you want to add the information in the registry?

  You should then see a message that information has been registered in the register.

  Reboot your system and test.

  You can delete the enableit.reg file when you are finished.

  If the registry editor has also been disabled, we first fix (not a problem).

• malware has been detected: partially removed, how to remove the rest of it - operate: Java/CVE-2010-0840. EX

  Exploit: Java/CVE-2010-0840. EX

  The above malware was detected on my computer; has been partially removed, how

  remove the rest?

  Hello
  Try the sequence of steps 1 and 2 in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide
  It contains instructions which will remove the malware more. If you have any questions, just ask me. I hope this helps you.
  Brian

• Satellite T210 - error has been detected by the cooling system

  I hope someone can help out me, I had a my laptop for almost a year, it's a T210 and occasionally it comes up with the following pop upward:

  WARNING: A problem with the cooling system has been detected. Please turn off your computer immediately and return it for service.

  If I click ok it does not go far but its obviously not resolved as long as he keeps breed. Any ideas what the problem is and if it is an easy fix or am I'm going to have to send it back to Toshiba?

  Thank you

  Hello

  Yes I know this error message that some people here in the forum reported the same error message and it seems to be a software bug
  The cooling modules are ok.

  As far as I know the new recovery system would solve this
  However, you should not be afraid that something is wrong with the cooling module system

• VirTool:Win32/obfuscator.AFX / Obfuscator.XZ and that it has been detected but not deleted... How can I get rid of him?

  I ran security Microsoft SCANNER and it says there: VirTool:Win32/obfuscator.AFX / Obfuscator.XZ and that it has been detected but not deleted... How can I get rid of him? I ran malwarebites and it sees nothing

  Hi winfrey,.

  ·         Which antivirus program is installed on the computer?

  I suggest that you download and install Microsoft Security Essentials to see if it helps.

  Anti-Malware, viruses, Spyware Protection | Microsoft Security Essentials

• iPod has been detected but cannot be identified correctly-HELP

  So, less than a month ago I bought an iPod nano 7th generation and when I bought it, it was fine and I downloaded all my music on it. Tonight I went to add the music more and I get the following error message - "an iPod has been detected but could not be identified properly. Please disconnect and reconnect the iPod and then try again. »

  I tried the following:

  -Plug the machine again and I tried all the USB ports.

  -Restart of my PC

  -Uninstall and reinstall every product Apple on my PC

  -Go to the Device Manager and of the driver updates

  -Go to C: / > Program Files > common files > Apple > Mobile Device Support > drivers > usbaapl64 > install

  All in vain-_-

  I am running Windows 64-bit 10.

  Any help is really appreciated, thanks in advance

  Uninstalling and reinstalling each Apple on my PC product

  Try to do this again, the procedure described in this document of Apple.  It lists all the components of an installation of iTunes and the precise order to uninstall, and measures to confirm everything was deleted

  Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components

  Then, download and reinstall the latest version of iTunes

  https://www.Apple.com/iTunes/

• Win XP (32-bit) with iTunes 12.1.3.6: iPod Nano A1320 16 GB error: an iPod has been detected, but it could not be identified properly.

  I have the following environment:

  Win XP SP3 (32 bit)

  iTunes 12.1.3.6

  iPod Nano A1320 16 GB (5th generation)

  I get an error when I try to connect my iPod Nano A1320 16 GB (5th generation):

  An iPod has been detected, but it could not be identified properly.

  Please disconnect and reconnect the iPod and try again.

  If the problem persists, uninstall iTunes and then reinstall iTunes.

  I tried my other iPod Nano A1320 16 GB (5th generation), and it gives the same error.

  I looked at other similar positions with this error message and tried their solutions, but none of them does not seem to work.

  However, my iPod Nano A1285 8 GB (4th generation) is recognized by iTunes 12.1.3.6.

  Any suggestions? Thanks in advance for your help.

  Since it's Windows XP, it's maybe the old problem of the "drive letter".  Being a Mac user, I don't know the exact procedure, but try changing the drive letter of the iPod.  Maybe that's how

  Change the drive letter for iPod

• Satellite C660P - 11 p and WXP - problem has been detected

  I tried to install OS XP Professional SP1 + SP2 on my Toshiba Satellite C660P - 11 p, but after aprox. 1 minute from starting installation of Windows, the following message was displayed:
  "A problem has been detected and Windows has shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again follow these steps:
  Remove any newly installed hard drives or hard drive controllers. Check your hard drive to ensure that it is properly configured and completed. Run CHKDSK/F to check for hard drive corruption, and try again.

  I tried to install OS again, and the same message appeared.
  I don't know what I can do to solve the problem.
  How can I remove the installed hard drives or hard drive controllers?

  Thank for your help anticipate

  And during the original installation of Windows 7 everything becomes OK?

  I put t know what you mean with SP1 + SP2, but when you want to install WXP Windows XP edition family SP2 or WXP including SP3.
  You have loaded driver SATA?
  You use the compatibility mode for the SATA option in BIOS?

• Satellite P500-12D - a problem with the cooling system has been detected.

  Hi there everyone,

  I bought a Satellite P500-12D, which was a return of retail. When I start it up it runs a few minutes and then it appears on the screen:
  WARNING: A problem with the cooling system has been detected. Please, turn off computer immediately and return it for service.

  Follow the health of toshiba CPU is less than 50% temp and if it goes much higher that the cooling fan turns on and it lowers down and the fan stops again, I noticed that only the fan works r/h to cool the cpu, both should come together? What is a software problem?

  TThe unit is new without even the plastic off the surround screen or webcam. Any help or even point me in the right direction would be much appreciated, gary

  Hello

  Which program gives you this error message about the cooling system?

  Before contacting a service partner, as you can read in the error message, you must clean the cooling system using a jet of compressed air. Maybe dust blocking the fan or something else. Of more to clean up it of not necessary to disassemble.
  Here is an article on this topic: [how to clean a Toshiba laptop cooling system? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=40]

  If it doesn't help, contact the nearest service partner.

• Satellite U500 - problem with the cooling system has been detected

  I have a Toshiba Satellite U 500 series, and I just got a message saying "a problem with the cooling system has been detected. Please turn off the power immediately and return it to service.
  Before that, I would like to know if anyone has had this problem and if there is a software solution?
  HIERARCHICAL

  Check HERE to see if anyone else had this problem in the past.

• How can I know if an external drive has been used for Time Machine and what computer it came with too?

  How can I know if an external drive has been used for Time Machine and what computer it came with too?

  I have several laptops and iMacs. I spent the relocation of the year and only used the MacBook Pro.

  Now I'm trying to figure out which drive goes with which computer

  I connected just a disk seagate 1.5 t and the first thing he did was to ask if I wanted to use it as a Time Machine drive.

  (1) if it is the TM disk accompanying this computer don't would not it have just started upward automatically?

  (2) what happens if I would have said yes?

  (3) I don't even know if it's been activated for TM. Is there a way to tell? It may hold just for iMovie files and other programs associated with a computer from my past.

  All readers of backup Time Machine contains a folder named: Backups.backupdb. If you open this folder, you'll find another folder with the name of the computer that has been saved. If several computers have been saved on the same disk, you will have several folders.

• Qosmio G20 error message: problem with the cooling system has been detected

  I'm trying to fix a Qosmio G20 (which is about 3 years old, it is no longer in warranty).

  Error message: Warning: a problem with the cooling system has been detected.

  I managed to remove the outer case and observe the operation of the machine, and basically one of the fans does not at all. The fan which is closest to the power connector seems to work very well (he seems to be turning a lot, do not know if this is normal), but the other fan who does not seem to move at all.

  When I put in place the case and on the machine, I noticed after a few minutes the vent of the fan working heat sink had warm enough, while led the non-working fan remained cool.

  I cleaned the fan from dust and have also changed the BIOS battery mode mode high performance, but the problem still exists.

  I would be grateful if someone could give advice if the problem is the fan or something else.

  If the fan is the problem, where I can buy a: i live in the United Kingdom?

  Hello

  I think there might be something wrong with the cooling module and the replacement would be necessary.
  Usually, this should be done by an authorized provider (ASP) in your country.

  Technicians could replace it with a new part and also could renew the thermal grease which is placed between the module and the CPU cooling.

  So contact the ASP in your country and ask for later handling.

  By the way; also, you can buy the cooling of the ASP module!

  Good luck

• Satellite A40 - attention: problem with the cooling system has been detected.

  Hello guys,.

  From time to time, I get the following message is displayed:

  WARNING: a problem with the cooling system has been detected Toshiba
  Please turn off computer immediately and return it for service.

  I have Windows XP on it.
  I opened the cooling fan and clean it. Of course, I found it dirty rally.
  But still, I get this message!
  What should I do?
  I live in Northern Germany.

  Any advice is welcome and thanks in advance.

  Ibrahim

  Hello

  The message says it all!
  In this case you should contact the service provider authorized in your country!

  > I opened the cooling fan and clean it. Of course, I found it dirty rally.
  Eventually, the cooling modules don t like needs and that is why the message again!

  Nothing to my friend... you need help laptop technician

• Satellite C660D - a problem with the cooling system has been detected

  My laptop is a * Toshiba Satellite C660D-11th * and I have a message that keeps coming up every once in a while 'alert system' head and reads as follows: "WARNING: a problem with the cooling system has been detected." (Next line) Please, turn off computer immediately and return it for service. »

  I had this warning for the coming weeks and it tolerated, but it worsened and annoyed me for the last time. I can hear the fan and the computer is not over heating (the CPUCool freeware tool detects a 51º CPU temprature C). No further questions arise as the computer slows down, it is right in the path of what I do, like typing right now.

  I tried to solve the problem by changing the "Power Options" in the control panel of Windows 7 'High Performance', and then selected under the 'battery' both 'Sector' columns, 'Never' for the parameter "put the computer to sleep. It seems to work, and no error message has occurred since then. However, this is not a solution...

  Please help quickly, this prevents me from working and even other things now.

  Thank you

  Hello

  Usually, this message would appear if something is not wrong with the cooling system. But I read here in the forum that maybe it's a bug of software and after new system recovery this message should no longer appear.

  But if you notice some upper temperature or abnormal noises, then I recommend to check this with a service technician

• Pro NAS ix4-200r "failure has been detected" but what kind of failure?

  I have a NAS Pro StorCentre ix4-200r that reports "data is available, but a failure has been detected." However the event log no is not actually tell me what type of failure has been detected.

  In the settings, the discs show normal. I went through the manual and each control panel and there is no reference to what the error is referring to.

  How can I identify the real fault? The message means that the data corruption has been detected? A disk is a failure? This Smart triggerred a function call? It checks external drives? Is there a way to get the logging level and the coup an integrity check / diagnosis?

  Go ahead I either need to disconnect and check each one individually using something like Seatools (which won't help if it's simply the corruption of data), drive or format the SIN and start over (which will not help if there is a failing drive). Any ideas?

  It is strange that the sdb and SDC are out of use, but SDS 3 must be the HDD in slot 1.

  If you really want to test this situation, you can remove the disc and then re-run the log dump and check with the same process.