I'M HAVING A PROBLEM WITH MEDIA CENTER 05 GEL IT STARTED AFTER A SECURITY UPDATE, BUT I'M NOT SURE THAT WE

Similar Questions

• Having a problem with Windows Live Mail lock up shortly after the start.

  Having a problem with Windows Live Mail lock up shortly after the start. When I start the Task Manager to end the process, it sometimes freezes and the only way to solve the problem is to disconnect which forces the profile to close. Assuming a corrupted profile, I followed the instructions of Windows support to fix a corrupted profile and copied all the files except ntuser.*. When I try to paste them into the new user profile (all profiles are admins), I get the error message asking if I want to leave to proceed. When I click on continue, all THE files in the profile block "corrupt" to the new one, including ntuser.*, that I was not choosing. Why? If the files are rewritten empty? Tried 3 times, same result. Please notify.

  I think I found it! I went in the Windows Live Forum and found a thread that looked like my problem. He suggested going to msconfig and take off Live Mail list start. I couldn't find it on the list, but the top element was "" default EXE"something of an unknown manufacturer. I took it out of the startup list, and Live Mail works again! Thanks for your help!

• problem with media center and digital map cable ATI

  Installed a tuner with a media center W7 ATI digital cable.  Cable company (Cablevision) active the card and check the signal, all OK.  Several problems. First of all, on channels it tells me that I need to activate windows that has already been done.  In the second place, on channels not premium I only get standard definition not hi-def.  With my old card of clear QAM tuner, I had hi-def on non coded station.  Verify all the information cable card and everything is ok.

  Did you run the digital cable Advisor in Media Center Extras Gallery and
  enable digital cable support?
   
  If this has been done with success and you still have problems:
   
  Where did you get the ATI DCT and he points out what firmware? You can check
  This in the network window.
   
  Saturday, August 28, 2010, 02:33:01 + 0000, Bob 3100 wrote:
   
  > Installed a tuner with a media center W7 ATI digital cable.  Cable company (Cablevision) active the card and check the signal, all OK.  Several problems. First of all, on channels it tells me that I need to activate windows that has already been done.  In the second place, on channels not premium I only get standard definition not hi-def.  With my old card of clear QAM tuner, I had hi-def on non coded station.  Verify all the information cable card and everything is ok.
   

  Barb Bowman

  http://www.digitalmediaphile.com

• Problem with Media Center recorded TV shows DVD burning.

  I recorded a few TV using Media Center shows and when I try to burn on a DVD they start and then slow down and stop. I tried on two different computers Vista with Home Premium and the other with Ultra same on both. They identify to the about 23 to 32% complete before stopping and don't ever burn anything on disks. It is said that the engraving is underway.

  Hi Kb11,

  Have a. you tried to burn on a different DVD?

  B. do you use a third-party burning software on your computer for CD and DVD burning?

  C. Have burn you TV shows successfully earlier?

  D. do you have an error when burning?

  Burning a TV show on a DVD can take some time to complete, depending on three factors: the length of the speed of your burner DVD, added video files and resources of your computer system. Wait for a while and see if it ends.

  1. Click the Start button, click all programs, and then click Windows Media Center.
  2. If Media Center is not full screen mode, click the maximize button.
  3. Insert a blank recordable DVD into your DVD burner.
  4. Click on the notification, burn a CD or DVD which appears.

  If you do not see the notification, on the Windows Media Center start screen, navigate to tasks, and then click Burn CD/DVD.

  1. In the Select the disc Format page, click Vidéo DVD, and then click Next.
  2. Type a name for your DVD, and then click Next.
  3. On the Select media page, click recorded TV or video library, and then click Next.
  4. Select the items you want to burn (check marks appear on or next to the items that you select) and then click Next.
  5. To add more TV shows or video files on the disc, on the Review & Edit page, click add more.
  6. Repeat steps 5 through 7 until you have added all the shows recorded TV and videos you want to burn.
  7. On the page of review & edit , click Burn DVDs.
  8. In the opening of copy notification, click Yes.
  9. Once the disc is burned, in the notification filling burn , click done.

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Center

  Please let us know the result.

  Kind regards
  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• "Look at one or more conflicts tuned" message in Media Center - without a TV tuner after the Win Update

  My ATI TV Wonder tuner Digital Cable Ready with my desktop computer HP Pavilion Media Center (Vista 64), has worked and the TV Tuner received 135 channels of cable TV has recorded up to WHAT I've done an update optional Windows which included something for the ATI TV Wonder software. Maybe it's a coincidence, but ever since then, I get the message 'Display or listening to conflict' when I try to watch live TV. System Restore does not resolve the problem. So my problem is, I can't view or record live TV.  All the other features of Windows Media Center always seem to work as it is supposed to.

  If I have access to tasks > settings > TV > TV Signal and try setting the option of TV Signal or Digital Tuner Diagnostics options, I get a "no tuner hardware detected... Please ensure equipment is installed correctly...» »

  I can still play my previously recorded TV files very well. I can get the Media updates > News > MSNBC.com online all day and can watch the news clips daily including archives.

  I have the 1.19 firmware update. It has been downloaded and applied by the Device Manager. Yet, no TV. I also uninstalled and reinstalled the firmware according to the AMD instructions that suggest to reapply the firmware without the CableCard installed card and in a window of 2 to 10 minutes of turning on the device. This does not solve the problem either.

  I bought a new ATI TV Wonder unit exactly as the former, exchanged, but I still have the same problem. I also took the ATI TV Wonder unit and cables and hooked it up to my laptop HP Media Center, and the TV Tuner has received from live TV. So I know the receiver module within the ATI unit is not bad. I also replaced my graphics card, but that was not the problem.

  Thanks for taking a peek at my problem.

  After unsuccessfully trying everything I could find that had the potential to solve my problem, I finally solved the problem myself. It's actually a corrupted Windows file that allows my TV tuner, which caused all my problems. I reinstalled my Vista operating system to its original state, and now the ATI TV tuner works fine.

  A 'thank you' to everyone who pitched in to help.

  Mr. Fix It

• Problem with music player and from the Gallery after the ICS update

  Hello everyone, after I've updated my bow (lt15i) to ICS 4.0.4, i found a few bugs on the music player and the Gallery

  (1) if I add some photos on the SD card, it shows no not on Gallery (Gallery Xperia and ICS Gallery)

  (2) if I add music on SD card, also not shown on the music player, so I have to use Explorer to find and play, it's very annoying

  I tried to erase the music player data, but no results and I tried to use third party applications (Jetaudio or Google Play Music) but it is same

  Anyone have problem like me? What can I do to fix that?

  This could be resolved if you reformat the SD card

  Don't forget to mark the correct answers & useful answers

• After a security update says he can not validate my copy of XP, so Microsoft Security Essenils will expire in 30 days if I do not correct the problem

  I have Windows XP with SP3 and IE8.  15 Sep 2011, I got 7 security updates and after installation windows niche a message that Windows cannot reconcill my vallidation so my copy of Microsoft Security Essentials would stop working if I has not solved the problem.  I followed his instructions and ask the above question, and the answer has been updated for windows 7 and IE9.  Can someone tell me how to solve this problem without updating.  Please be very specify because sometimes I'm just slow othertimes very dense and awarkd, thank you.

  Chances are that you see the effects of an infection hijackware, one that was already present on your computer when you installed Microsoft Security Essentials!

  Additional references may include:

  Can I install Microsoft Security Essentials [or any other anti-virus/anti-spyware application] to clean my already infected computer?
  http://answers.Microsoft.com/thread/87058857-D181-4019-a723-efd9a49d9275

  You can start a free Support of MSE incident directly by opening your browser to https://support.microsoftsecurityessentials.com/. Select the appropriate option (for example, failure to update Virus and spyware definitions;) "I think that my computer is infected), then select the appropriate support available option for your region.

  In these forums, you will find some support for Microsoft Security Essentials (MSE): http://answers.microsoft.com/en-us/protect/forum

• problems with media center repair

  Message: To run this application, you must install one of the following versions of the .NET FRAMEWORK v1.1.4322. I installed sp2 v2.0, v3.5 sp1, sp2 v3.0, worm 4 Client Profile and extended v4

  Hello

  1. have you made changes on the computer recently?
  2 sews give us the full error message?

  See method 2 in the article below and the repair of the .NET Framework.
  http://support.Microsoft.com/kb/KB976982

  I hope this helps.

• I'm having a problem with Windows XP, because the icons are so big on my computer I can not disconnect the firewall - there is no sidebar... I was told to change the pixels and more, but will not slide - clues someone? PLEEEEEEEASE help!

  I tried to move the sliding bar - no chance vickipeterson2

  Hi vickipeterson2

  You must start your Windows in VGA MODE and reinstall the graphics driver.

  To do this, you must then:

  Turn on your machine (Copmputer), during the mother cards Logo screen,

  Press F8 repeatedly until the menu black screen apears

  Pentecost arrows select ENABLE VGA MODE

  Click workstation whit right mouse button, select Properties, hit on the hardware, device menager

  In the tree hitting adapter display or display of Pentecost right mouse button and choose uninstall.

  Restart your Windows and reinstall the graphics driver from your.

  This will solved your problem

• What video capture cards work with Media Center?

  I use Windows 7 Media Center and I content HD through DirecTV, my system has STB (2) with outputs HDMI (outputs of the component also), I want to know who (2) video capture cards work with Media Center as would make a key pair?

  It seems that MCE works with the capture card (1), but not two...

  Help, please...

  Saturday, December 20, 2014 08:46:27 + 0000, RonaldPeterson wrote:
   
  > I use Windows 7 Media Center and I content HD through DirecTV, my system has STB (2) with outputs HDMI (outputs of the component also), I want to know who (2) video capture cards work with Media Center as would make a key pair?
  >>
  >>
  >>
  > It seems that MCE works with the capture card (1), but not two...
   
  Try posting this question at the http://thegreenbutton.tv - Media Center has been
  designed to work with the tuners for television recording, but the people he could have
  a few ideas.
   
   
   
  __________________________________________________________________________________________________
  Barb
  MVP Windows Entertainment and connected home
  My Blog - http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   

• I'm having a problem with my Windows Media Player and its automatic scoring system.

  I'm having a problem with my Windows media player and its rating system. Usually in Windows Media Player the blue side star system only rate once internet-based critical car. Then after playing constant song change the blue stars. However, on my Windows Media Player ratings only to have automatically scored only once and every time I play the song the side remains the same.

  Whenever I play a song in Windows Media Player 11 it rates the song but when I play the song again the rating remains the same. It auto-taux only the song once. How can I fix it?

  chk this link

  How are ratings used in Windows Media Player?

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-are-ratings-used-in-Windows-Media-Player

• Windows 8.1 update problem (I want to improve my Windows 8 Pro with media center pack)

  Hi, this is Rafi K, I recently installed win 8 64-bit on my computer dell laptop XT3, so activated my product key with MEDIA CENTER PACK, so now I want to improve it to WIN Pro 8.1. But I keep if you search windows 8.1 update, but it says "sorry this update is not available for your PC or you can run an edition of windows that does not support the update of the store", is if there's someone who can help me to update my windows 8.1 pro. Thank you! am waiting for your valuable response.

  Hello Rafi K,.

  Welcome to the Microsoft community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem.

  According to the deciphering of the question, you can not upgrade your computer Windows 8 to 8.1 of Windows. So, I suggest to try the steps by Vivian Samartha responded on April 12, 2014 in the following thread and see if it works for you.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-windows_install/kb2919355-Windows-81-update-fails-800f0092-and/4d4d23a3-695a-4bd4-B340-d2ce9c75919d

  If the problem persists after trying the above steps, I'll ask to follow the steps given by David Williams Dixon in the Blog below.

  Something happened and the 8.1 Windows installation may not be completed. (And now you are bored)

  We know if the steps help you in upgrading the computer to Windows 8.1.

  Kind regards

• Windows 8 pro with media center - Nvidia Geforce 8400 M G card and driver video problem or something else?

  Hi I have a problem with my Windows 8 pro with media center, my laptop has a Nvidia Geforce 8400 M G graphics card and driver crashes all the time also popups and windows menu has a black background, the only solution is a reboot, can you tell me what is a problem? Thank you

  Hi MAXUSVAN DERT.

  Glad to know that you have posted on the community of Windows 8.

  From your description, I can understand that you are unable to connect to Windows 8 pro with media center and you have a problem with installing the drivers.

  To install the drivers for Nvidia Geforce 8400 M G please follow the link below and check if the problem is resolved.
  http://www.nvidia.com/Download/index.aspx?lang=en-us.

  If the problem is not resolved, then try to install the drivers in compatibility mode.

  Follow the steps to install in compatibility mode:

  a. do the driver installation file right click and select properties and then tap or click on the Compatibility tab.
  b. check the run this program in compatibility mode for: box.
  c. press or click the menu drop down and select a previous operating system, and then tap or click OK.
  d. try to install the driver and verify.

  See also this link for compatibility mode.

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Also try Nvidia Support - check with the support that she might be a known issue.

  http://www.nvidia.com/page/support.html.

  Hope the above information helps. If the problem is not resolved, please get back to us and we will be happy to help you.

• Refresh Windows 8.1 Pro with Media Center

  Dear all,

  I know that this issue is outdated, but I'm stuck and could not find relevant suggestions to solve the problem. I had a Windows 7 preinstalled on my laptop and when windows 8 pro upgrade offer was announced I was among the first who was immediately upgraded to windows 8 pro and then as a special offer that also gave me the windows media center to activate. I would like to confirm that I have not the mail where in the product key for windows 8.1 Pro 64-bit and windows media center. After the upgrade, except a few hiccups, there is no problem at all. Then when windows 8.1 pro was available on the windows store I've even once upgraded to windows 8.1 pro. After the installation of my new configuration was Windows Pro 8.1 with Media Center.

  But immediately after the upgrade, I realized that the discount into account and recovery option did not work. He always encouraged me that some files are missing and I need to insert the media. But never, I downloaded an image ISO of Windows 8 Pro and don't have I not a windows media 8.1 pro because of the way I had been upgraded to windows 8.1 Pro with Media Center. in any case, I just forgot the question and never bored on this subject seriously.

  But Offlate I realize that my computer has slowed down considerably. I tried the option to delete the Temp, Prefetch compensation files, scan /sfc, defrag etc etc. But nothing seems to work. Suddenly I realize also that when booting I get a blue screen with the message this process is critical error blue screen death. Sometimes, I just get a prompt Commander with press TP message press Ctrl Alt Del and then some message about a problem in external media connected failure... I never took a snapshot of the same thing.

  Now someone can tell me how to do: -.

  b how to refresh windows 8.1 Pro with Media Center without any media. I have only windows 8 Pro and Media Center Key separately.

  (b) If there is no way to update windows 8.1 Pro without media then

  (I) Comment to download media Windows Pro real 8.1 with the key of Windows 8 Pro on the Microsoft site.

  (ii) what happens if I download windows 8 Pro Media and then try to update windows 8.1 Pro? Will it work?

  (iii) if I download Windows 8 Pro and then reinstall on my laptop running windows, Pro 8.1 will he do a clean install? What happens to the Sony Vaio Care which is preinstalled on my PC? It's the Bios that has been updated on my PC? I checked out the site of Sony Vaio and found that it has not released and drivers for Windows Pro 8 or 8.1 of Windows Pro. Sony has released updates for Windows Pro 8 and 8.1 of Windows Pro only. So after a clean installation from which will be drivers for Bios, graphics, Ethernet, Bluetooth drivers driver, Wireless LAN Driver, SATA driver, card reader memory, Vaio Care pilot, Vaio Control Center, Data Rescue, Notebook Utilities, Vaio Update, Vaio Gate, fast Internet access, Vaio Smart Network, pilot ME, etc etc...

  (c) how to fix the blue screen issue?

  (d) what to do if I get the Message to press Ctrl Alt Del again and it won't start... Return to the menu even again and again...

  I'd appreciate if tech assistants would care to guide me to solve the problem. Any attempt to answer in very technical terms without guides step by step is likely to confuse me further... If a request to all the counterparts to stay simple.

  But a simple thought crossed my mind - why Microsoft did complicate the question so... Why couldn't they keep the key product of Windows 8 and windows 8.1 even for anyone to directly download the windows pro 8.1 and refresh the PC.

  anyway thanks in advance... regards

  Hi Isabelle,.

  I understand that you are looking for ways to refresh your computer.

  IF you get a message missing files when executing update, it is recommended to create a bootable disk for Windows 8.1 and launch then refresh.

  Please follow the link below that will guide you to create the installation media for Windows 8.1:

  http://Windows.Microsoft.com/en-in/Windows-8/create-reset-refresh-media

  You have not an ISO for Windows 8.1 with media center, it's Windows 8.1/Windows pro 8.1.

  Once you launch a clean install of Windows, you must reinstall the application on the computer manufacturer website. and to learn more about the availability of drivers, contact the manufacturer of your computer for help.

  Blue screen problem can be caused for multiple reasons such as drivers, hardware...

  See the bottom of the article that will help you with the blue screen on the PC problems:

  http://Windows.Microsoft.com/en-us/Windows-8/resolve-Windows-blue-screen-errors

  Message from press Ctrl Alt Del appears mainly due to an external device, try to remove the external devices connected to the computer and then restart it.

  Please contact the telephone support, suggest so that all difficulties can be addressed, see the link below:

  https://support.Microsoft.com/en-us

  Hope this information helps, for assistance please answer.

• System hangs after upgrade to 'Windows 8 preview version' to 'Of Windows 8 preview with media center version' when connected to the Internet

  I use "Windows 8 preview version" for the last 4 months.

  I recently updated the system 'Windows 8 preview with media center version', but my system hangs after each start and restarts.
  It works only when I disconnect from an Internet connection. Once I connect to the internet, the system shows new blue screen. Now, I don't even have a system restore to go back to the previous configuration.
  I want to use internet on a system without the system get crashed, please help me solve this problem.
  I am using Dell Inspiron 15R

  The minidump files display a stop error message DPC_WATCHDOG_VIOLATION (133) referencing the netio.sys:

  BUCKET_ID: 0x133_DPC_NETIO! StreamInjectRequestsToStack

  The netio.sys is a Windows driver that is involved in the "networking."

  The process that crashes regularly is avgnsa.exe which is a process of AVG.

  I would say to uninstall AVG and see if the accidents to solve.

  He also seems to be a remnant of a previous installation of Trend Micro (tmtdi.sys) driver.

  If you had previously installed Trend Micro plan to run the following Trend Micro removal tool:

  http://esupport.trendmicro.com/pages/How-do-I-Remove-Old-or-New-versions-of-Trend-Micro-Products-in-My-COMP.aspx#.

  If you're running Windows 8 pre-release version of the software consider using just the built-in Windows and antivirus software firewall rather than any third-party antivirus or firewall software.