I'm looking for (file error: HKCR\CLSID\ {1171A62F-05D2-11D1-83FC-00A0C9089C5A}- & DELETE THIS FILE?) Can someone please? Thank you

Similar Questions

• How can I find this file from Microsoft: HKCR\CLSID\ {1171A62F-05D2-11D1-83FC-00A0C9089C5A}-to REMOVE & CLEAR?

  Can someone HELP Please find this file and delete it? Thank you

  This isn't a file.  There is an entry in the system registry.
  HKCR is short for "HKEY_CLASSES_ROOT".
  To remove this key, you must use 'Regedit' (start-> Run-> 'regedit').
  Editing the registry can be dangerous.  Make sure that your registry database is backed up before making any changes.  For more information, see:

  "Information for advanced users Windows registry"
    <>http://support.Microsoft.com/kb/256986 >

  HTH,
  JW

• If I pay for an application and it does not work I would get my money back guarantee, please, thank you

  If I pay for an application and it does not work I would get my money back guarantee, please, thank you

  This is a user to user forum. You don't talk to Apple.

  You can report a problem with applications to http://reportaproblem.apple.com and request a refund as well.

• I just bought the DC Pro Acrobat full of desktop software only.  Have downloaded fine, but when I go to install the download, it is for me an "access violation at address 00000000. read of address 00000000 ". Can someone please?  Thank you!

  I just bought the DC Pro Acrobat full of desktop software only.  Have downloaded fine, but when I go to install the download, it is for me an "access violation at address 00000000. read of address 00000000 ". Can someone please?  Thank you!

  Hi Rob,

  What is happening in Mode safe? If you can install it in Mode safe mode then delete all entries in startup via msconfig as this could conflict with the program.

  If this does not work, saving all the data of your administrator account, you can delete the account and recreate it.

  Kind regards

  Rave

• I can't see changes in a folder unless I go up a level and then re-enter folder, for example, create new folder, rename the folder, rotate the image etc. Can someone please?

  I do not see changes within a folder, except if I go up a level and then again enter the folder, for example, create new folder, rename the folder, rotate the image, etc..

  By pressing the "F5" key would probably be to refresh the folder.

  See if this article helps you with this problem:

  "List of the files in the Windows Explorer folder is not refreshed after that you create, move, or delete files"
    <>http://support.Microsoft.com/kb/823291 >

  HTH,
  JW

• Looking for files cleaning software, any recommendations?

  Looking for files cleaning software, any recommendations?

  I use and like DiskMax by www.KoshyJohn.com, it works well and is well worth the donation.

• I'm looking for help to share best practices to upgrade the Site Recovery Manager (SRM), if someone can summarize the preparatory tasks?

  I'm looking for help to share best practices to upgrade the Site Recovery Manager (SRM), if someone can summarize the preparatory tasks?

  Hello

  Please check the content below, you may find useful.

  Please refer to the URL: Documentation VMware Site Recovery Manager for more detailed instructions.

  Important

  Check that there is no cleanup operation pending on recovery plans and there is no problem of configuration for the virtual machines that protects the Site Recovery Manager.

  1 all the recovery plans are in ready state.

  2 the protection status of all protection groups is OK.

  3 the status of the protection of all the individual virtual machines in the protection groups is OK.

  4 the recovery of all groups of protection status is ready.

  5. If you have configured the advanced settings in the existing installation, note settings you configured before the upgrade.

  6 the vCenter local and remote server instances must be running when you upgrade the Site Recovery Manager.

  7 upgrade all components Server vCenter Site Recovery Manager on a site until you upgrade vCenter Server and Site Recovery Manager on the other site.

  8 download the setup of Site Recovery Manager file in a folder on the machines to be upgraded the Site Recovery Manager.

  9 make sure no other facilities-\no updates windows restarts done shoud

  Procedure:

  1. connect to the machine on the protected site on which you have installed the Site Recovery Manager.

  2. backup the database of Site Recovery Manager by using the tools that offers the database software.

  3. (optional) If you upgrade of Site Recovery Manager 5.0.x, create a 64-bit DSN.

  4 upgrade the instance of vCenter Site Recovery Manager server that connects to vCenter Server 5.5.

  If you upgrade a vCenter Server and Site Recovery Manager 4.1.x, you upgrade the instances of vCenter Server and Site Recovery Manager server in the correct sequence until you can upgrade to Site Recovery Manager 5.5.

  a upgrade vCenter Server 4.1.x to 5.0.x server.

  b Update Site Recovery Manager of 4.1.x to 5.0.x.

  c upgrade server vCenter Server 5.0.x to 5.5.

  Please let me know if it helped you or not.

  Thank you.

• I am looking for a WIA driver for a canoscan5200 f and use Windows 7 profesional. Can someone please advise?

  I am looking for a WIA driver for a canoscan5200 f and use Windows 7 profesional. Can someone please advise?

  Such a driver would be obtained on the Canon support site

  http://software.Canon-Europe.com/products/0010070.asp

  And if they do not it is not a

• Hi, I use Adobe Photoshop Lightroom output CC Camera Raw 9.5 2015.5. I am now with Nikon D4s shooting but the lightroom does not read the RAW format. Why? Is it possible to import the RAW files in lightroom? Thank you for your help

  Hi, I use Adobe Photoshop Lightroom output CC Camera Raw 9.5 2015.5. I am now with Nikon D4s shooting but the lightroom does not read the RAW format. Why? Is it possible to import the RAW files in lightroom? Thank you for your help

  I'm not an apple person.  I read on a few different forums that apple has changed what is called 'writing' in a recent update to apple.  You may need to find an Apple expert to show you how to make sure you are allowed to write to files or locations on your computer.

• Can someone please downsave a file for me please?

  Hello world

  Someone has created a menu for us in CS6 and I can open it in CS 5.5, but when I do all the text appears in separate lines, so it is difficult to change. Can someone please downsave to me, so I can see it as a normal file? I would be eternally grateful.

  Allie

  Hi grimmylina,

  I tried saving the file down, but there is no option for CS5.5.

  Saved the CS5 file. Hope you can open it very well as well.

  https://files.Acrobat.com/a/preview/00754e78-9AD3-4b94-b35d-bac4b11a0929

  I hope this helps.

  Kind regards

  Sumit Singh

• I am a novice with the games. I downloaded 4Shared Upwords, but do not know how to open the file. Can someone please tell me how?

  I am a novice with the games. I used to have Upwords on an old computer, but the CD does not work on my new laptop. It is used to open with Direct X, so I installed on my new computer. I downloaded 4Shared Upwords & unfortunately I do not know how to open it. Can someone please help?

  Hi JudeAustin,

  ·         What version of the operating system is installed on the computer?

  ·         What happens when you try to install the game?

  ·         You get the error message?

  ·         What is the format of the file that you downloaded?

  I suggest you to contact the game manufacturer for more help and information.

  For reference:

  Install a program

  http://Windows.Microsoft.com/en-us/Windows7/install-a-program

• I think that my system of basic windows files have been changed and currupted can someone please help!

  I get major errors that led me to think my windows files have been modified and currupted I just can't install microsoft updates they download, but I'm unable to install, I'm unable to use the Disk Defragmenter and disk scan as it said my system is already in use. I am also unable to use my acer factory restore settings because it loads but never finishes running can someone please help! I am not in a position to buy or pay for a new cd of windows so that I can make a new clean instalation as I can't afford it can someone please help!

  Download of updates of work but the installation of updates arnt working
  installation of games arnt working cd - I get errors
  disk defragment simply does not work I click top but nothing happnens - perhaps sumthing to do with priviliages admin, but I am the administrator.
  Scan disk does not work as it says system is already used but works if I put it to run at reboot
  MY acer DEFAULT factory restore setting does not work it loads but never short - that led me to believe I have no control over my privliages of basic windows system, but I am the adminsitror.

  I already had major problems when WIndows would break and stops working when you start up, I managed to solve this problem in safe mode and disabling some start up programs to check the malware was eventually attached to my system using windows scanner and malwarebytes defnder, I managed, but it seems that it is undetectable.

  I am unable to afford a new cd for a new clean instalation of windows, I think I need. can someone please

  Hello

  There is no Windows Vista downloads available from Microsoft.

  You can contact Acer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  http://us-store.Acer.com/RCD/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It comes to the use of the partition Recovery of Acer to restore factory settings.

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  Note: During the process, all data stored on your computer will be overwritten. This means that all of your files, such as e-mail and photos, will be deleted. Therefore, we recommend making a backup of all data before starting the recovery process.

  To start the system recovery:

  1. Restart the computer.
  2. When the Acer logo appears on the screen, press the left Alt and F10 keys.
  3. If you are prompted with a Microsoft Windows splash screen, press the Enter key.
  4. After that the Acer eRecovery Management application is loaded, select your type of restore.
  5. Read the review and then click Next when you are ready.
  6. Click Next to start the restore process. It may take 10 minutes up to an hour fom anywhere to restore.
  7. Once the restore is complete, your computer will restart. After the reboot it will load Windows and start the installation of your software and drivers. Your computer will restart several times during this process. Once they are all completed, your computer will be like it was when you bought it first.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Some manufacturers have more available Vista recovery disks.

  If this happens or the recovery Partition is damaged, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• I closed my shot explorer.exe process in my task manager and now I can't load my computer, control panel and these files, can someone help me? When I try to open their message comes that no such interface supported.

  I closed my shot explorer.exe process in my task manager and now I can't load my computer, control panel and these files, can someone help me? When I try to open their message comes that: {26EE0668-A00A-44D7-9371-BEB064C98683} not this interface supported...

  Hi MAMARDA,

  Welcome to the Microsoft Vista answers Forum!

  I would like to ask you a few questions in order to get a better understanding of this issue so that we can better help you.

  (a) what version of Windows 7 use you?

  (b) what is the exact error message you are getting?

  Method 1: You can also try to perform a file system (scan SFC) verification tool. This tool will fix the system files are corrupted.

  Scan SFC enforcement procedure:

  1. click on the Start button

  2. on the Start Menu, click all programs followed by accessories

  3. in the menu accessories, right-click on command line option

  4. in the drop-down menu that appears, click the "Run as Administrator" option

  5. If you have the User Account Control (UAC) enabled, you will be asked permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  6. in the command prompt window, type: sfc/scannow then press enter

  7. a message is displayed to indicate that "the analysis of the system will start.

  8. be patient because the analysis may take some time

  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue

  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  11. once the scan is finished, close the command prompt window, restart the computer and check.

  Method 2: If this is a recent problem that has developed you can try to perform a system restore and check if it works very well.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose a different restore point and then click Next

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next

  4. click on finish

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  For more information, please follow the below given link:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212/

  Method 3: you can try to start safe mode and restore the system, if you are unable to do it in normal mode.

  For a safe boot, you can follow the below given steps:

  1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click the Start button, click the arrow next to the button lock and then click on restart.

  2. do one of the following:

  a. If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  b. If your computer has multiple operating systems, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  When you are in safe mode, follow the steps mentioned above to complete the restore of the system.

  Hope the helps of information.
  Please post back and we do know.

  Concerning
  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When you install the 2007 Microsoft Office Suite Service Pack 2 (SP2), I still received the error code 646... I tried to download the RegCure as advised, but the problem still exists... Please help me with this problem... Thank you

  Ideas:

  • When you install the 2007 Microsoft Office Suite Service Pack 2 (SP2), I still received the error code 646... I tried to download the RegCure as advised, but the problem still exists... Please help me with this problem... Thank you

  I tried to download the RegCure as advised, but the problem still exists...

  Who advised you to 'download... '. RegCure? Doing so could only worse issues! If you ever think that your registry database must be cleaned, repaired, boosted or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions.

  See http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/6e716883-7af4-4a9f-8665-2f4dd57eee8d ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I have an error message after an update, WindowsUpdate_0000737D""WindowsUpdate_dt000, can someone please help, my computer installs updates whenever I stop. "

  I have an error message after an update, WindowsUpdate_0000737D""WindowsUpdate_dt000, can someone please help, my computer installs updates whenever I stop. "

  @cinziac (who has not declared his complete version of Windows):

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft