I'm the only user how to become administrator?
I have a HP Pavilion dv7 Windows 7 and do not seem to be the administrator?
Click on start, Control Panel configuration, click users and see if it says you are. You should be. Some programs do you want to run them as an administrator. You do a right click on the installer and click on run as administrator. If you have a shortcut on the screen for the program that you have problems with, do a right click on the shortcut on the desktop, and then click Properties, compatibility and tick run as administrator.
Tags: Notebooks
Similar Questions
-
Suddenly, I can longer open my pictures folder. I tried to move a picture to the folder to see what is happening and received an error message saying I was not allowed to display the contents of the folder and if I move the picture here, I won't be able to see. I ran disk utility and found no permissions error.
How this could have happened and how can I fix this problem? I'm the only user. No one else has ever physical access to my computer. However, I sign up for Skyhub a few weeks ago and copied the contents of my Macbook it. Since then, a "Remote disk" icon on my hard drive. This would be part of the problem?
Select it, choose get the information on the file menu, open the section sharing and permissions and give you access.
(141083)
-
As the ONLY USER of my VISTA PC how do I boot directly to my desktop?
I am the only user of my Vista Ultimate PC. What are the directions that allow me to direcfrly Boot on my desk is by avoiding the user screen.
NOTE: I found the directions of last year in a magaszine PC and used them - worked perfectly. However, since the loss of two 500 GB hard drives (RAID Config).) they have disappeared. Need HELP, please, HELP.
Stace-
Stacey M. Karliss
E-mail address is removed from the privacy *.
Here's how: http://www.howtogeek.com/howto/windows-vista/make-windows-vista-log-on-automatically/
-
I am logged as singular Vista user. I can't delete files... impossible to install programs, etc... He always says access denied and I need permission... I'm the only user with UAC disabled. What is the problem?
Hello
Just a few questions:
[1] which version of Vista you are running?
[2] which folder you are trying to delete?Click the button START/Pearl and in the LINE RUN type "cmd" (without the quotes) and press ENTER.
Once in DOS:
Type "winver" (without the quotes) and press ENTER.
This will give you the exact version of Windows you are using.Also, copy and paste everything between the lines in the BACK window.
Whereis the account you used.
-----------------------------------------------------------------
net localgroup administrators/ Add -----------------------------------------------------------------Then log in as you and try again.
If it does not go back in the DOS window
Click the button START/Pearl and in the LINE RUN type "cmd" (without the quotes) and press ENTER.Once in DOS mode copy and paste everything between the lines in the BACK window.
--------------------------------------------------------
NET user Admin Password1 / add
net localgroup administrators Admin / add
net localgroup users Admin/delete
--------------------------------------------------------This will create a user called "Admin" with the password "Password1" and will only get the user to an administrator.
Log in as user name and try again.If you can't always do what you want to do, let know us and we will continue to try to help.
~ Engineer Support Microsoft Scott answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
I try to install a MOM. Layout ŒUVRE /driver file that I downloaded from the microsoft site.
As stated above, I get the message that I ' am not allowed not so early because an administrator password is required.As I am the only user, I don't know what pasword is intended. I always use one to open a session.Thanks in advance for your help.Gerard P van der VlistHave you tried "right click" on the file and selecting "run as Administrator"? If not, give it a whirl and see what happens. It * may be looking for the password that you connect to the computer with.
I hope this helps.
-
Use switch option appears after 5 years on Vista, and I'm the only user
Last night when I tried to shut down my computer like I always do, the option "User Swithc" appeared in the drop down menu it wouldn't let me use Restart, Shut Down or one of the other options. I'm the only user. I'm logged into my account and and off then with the warning that the other user will lose any unsaved work. HE DIDN'T THERE WAS NO ONE ELSE. Nor was he ever.
How can I get rid of this option. Also... When I click on start and down the options, such as program files, settings, etc. the blue highlite is only shown for a fraction of a second. I made no changes to my computer.
[Moved from comments]
Hello
Please go through it,Disabling Fast User Switching in Windows Vista- Click Start, type gpedit.msc and press enter
- Navigate to the following location:
Local computer policy | Administrative templates | System | Opening of session
- The value hide the entry points for fast user change enabled
- Quit the Group Policy Editor.
By activating strategy, administrators hide the user switch in the logon user interface, the start menu and the Task Manager. Note that the Group Policy Editor does not exist in some editions of Windows Vista. Alternatively, you can configure the setting through the registry.
Edit the registry
- Click Start, type regedit.exe and press enter
- Navigate to the following branch:
HKEY_LOCAL_MACHINE-SOFTWARE-Microsoft-Windows-CurrentVersion------policies------System
- Create a DWORD (32-bit) value named HideFastUserSwitching
- Set the value for HideFastUserSwitching to 1 data
- Exit the registry editor.
-
When trying ti uninstall a program, it won't let me. My administrator has set policies to prevent this? I am the only user on this laptop? How can I remove this program... It was a change of my internet explore (Inbox is now my default page) I'm using windows Vista
Hello
You run the computer as an administrator or as a standard user?
When you say"it's a change of my internet explore (Inbox is now my default page), what happens exactly?
What is you receive the exact error message?
Please provide us with more details about the issue so that we can help you best.
Follow the steps below and check if that helps.
Click Start, click 'All programs', please find and open the folder "Accessories".
(B) Please, right-click on "Command Prompt" and select "Run as Administrator".
(C) enter the following command in the window line come.
· NET user administrator / Active: Yes
- NET user administrator /active: Yes
- Note: There is a space between "Administrator" and "/ active: yes".
- 4. close the session and log on to the administrator account and then try to install.
Also try to disable UAC:
- 1. click the Start button, type "User account control" and press ENTER.
- 2. when the user account control settings box appears, move the slider to never notify.
- 3. click on OK and then install the program.
Note: Please turn off the admin account by running net user administrator / active: No. and then turn on the UAC after troubleshooting.
-
Hello, you who knows:
My OS is Vista Home Premium SP2 and I am the only user and
administrator.
... But the other week, unable to access one of my files, I created
another administrator account, which appears as a different user on
my welcome window, but I couldn't do much with.Therefore, I decided that it would be a useless account for me to
have created.
... How can I remove this 'new' alternate administrator account?
For some strange reason, Vista Home Premium doesn't have
an option 'remove' or 'delete '.Can someone knowledgeable computer please tell me what I can do
to remove this other account?
I do not see it when my welcome window opens.Thank you for your attention to this.
marlem388Dear noomene K,
What a beauty to hear from you again and to see all of your great advice!
Your instructions to cancel/hide delinquency counts that I myself
created were certainly useful... Unfortunately, and despite everything, the problem remains.
I therefore scoured Internet for some other answer and found a
prompt command, I decided to try.
-Says the command prompt: net user administrator /active: Yes, I have
used for the account I wanted to keep and continue to use.-And then I went to the user account window that I wanted to cancel
and placed the command prompt: net user administrator / active: No..Who took care of my problem!
But you gave me a few instructions very well anyway, and I really appreciate
your help.Thank you.
marlem388 -
Why do I connect when I'm the only user?
I used to be able to start my win 7 OS and he would come to the top at the level of the office, but lately it comes up with my name and a small icon that I have to click to reach the top of the office. That's happened?
I am the only user other than the guest account which is never used and it is (and never had) a password. How to get back to the top on the desktop?
Thank you
If you are not happy change:
http://www.SevenForums.com/tutorials/377-log-automatically-startup.html
Windows 7: log on automatically at startup
-
Windows 7 says that I can't uninstall a program because I don't have the admin rights, but I am the only user on this computer and I am logged on as administrator.
Please ignore the lectures about how I'm not supposed to use the machine as admin all the time and help me solve the problem. :)Hi EnergyIntell,
-Uninstall on what program are you facing this problem?
I suggest you to run the fixit and check if it helps.
Solve problems with programs that cannot be installed or uninstalled
http://support.Microsoft.com/mats/program_install_and_uninstall/?WA=wsignin1.0
I suggest you check if you're facing the same question in an administrator account account / new user.
Create a new user account-
http://Windows.Microsoft.com/en-us/Windows7/create-a-user-accountIf you are not facing the same problem in a new user account, it is understood that the user account is damaged. You can check the link below and use the steps provided in difficulty a user account is damaged.
http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile -
Hi Experts,
In my process I use multitask user regarding my needs. Now, I need to create screens of the user interface to the user of the task. Is it possible to several user interface screens to manage in the only user interface project in oracle BPM... Please let me know if you have an idea
.
Thanks and greetings
Charm_Narra
http://youtu.be/bpVVpDJLE1o This video explains how to ensure that the UIS of multiple human tasks in a single project ADF.
Dan
-
must ' secondary log - we ' turn in my services? (I am the only user)
After reading the definition of "secondary log - we ', it sounds like leaving a door wide open! Any other service not depend on either.
Hello
Please see the link.
To start the secondary logon service
Secondary logon service necessarily does not make the non-secure computer.
However, you can use the Microsoft Security Essentials antivirus software to protect your computer against viruses and other malicious threats. Since you are the only user, it is not necessary to start this service.
Microsoft Security Essentials
http://Windows.Microsoft.com/en-us/Windows/products/security-essentials
-
The only files are in my own project Docs & settings. Win XP SP3 IE8
Hello
If you are the only user who uses the computer the files you are referring are those that would be needed for troubleshooting for any failure of the system. I recommend you do not remove all the files that are hidden or disk rot.
-
I am not recognized as the administrator. I am owner of the computer and the only user
If anyone has any suggestions, they will be greatly appreciated.
For as long as I had my HP G60-235DX notebook pc with windows vista. It won't recognize me as the administrator. I am the only user and the owner. I checked under the control panel in the user accounts, and he said im set as an administrator but when some programs want to run it says I must have administrator privileges and then stops the program. Any help would be good.
You do a right click on the program > run as admin.
See you soon. Mick Murphy - Microsoft partner
-
Task Manager
my task manager currently has two active users in the console session. I am the only user of the computer and when clicking on USERS it always shows only one user. What or OMGE could be the cause.
Hello
Open the Task Manager->, click on users-> right click on another user who isn't currently active and choose log off.
This can occur when the user account is not properly disconnected.
I hope this helps.
Maybe you are looking for
-
Qosmio G30 - GPU has stopped working
Hello I have Toshiba Qosmio G - 30 portable series.Same problem as all the others. The GPU has stopped working. Tried with external monitor too, same thing.This is the 3rd time what happens. Finally 2 times had to be repaired. The guys at Toshiba jus
-
How to transfer music from a computer to a new computer using windows media player?
Windows Media Player
-
Head of blackBerry Smartphones Black Berry curve earphone jack problem
I have a BB curve obtained 8520.I is as a gift from a close relative a year and a half from the United Kingdom Version of the OS v5.0.0.1036 (Platfrom 5.2.0.104) The problem I face is now that I used a helmet and that I am tired of the out the end of
-
I recently bought and downloaded Adobe elements 12 to my laptop. Now, I have another laptop and I would like to install on it instead. What do I have to uninstall on my old laptop first and then download it again and reinstall it on my latest acquisi
-
Where CC records the library assets?
HelloI know CC keeps a local copy of my files in my computer, but where he doesn't save the library assets? Things like logos, colors etc. I create small pieces for each project and save them under libraries/subcategory but it seems that they are not