I'm unable to create a page in HTML only, no CSS

We try to promote our company on Yelp, so I need to create a landing page to be inserted into our existing Web site. Our Web site has been created before my time and it's an online store, so they used OpenCart to create. Our it guy has created a page 'information' for me to use as landing page and OpenCart seems to have its own internal HTML code editor. I can't seem to find much help online OpenCart that solves these problems and because it is open source, I doubt they have a lot of support.

I was hoping I could save time using Muse or Dreamweaver, but OpenCart doesn't seem to like the extra code they have created. So I try to simplify the ordinary HTML Help. OpenCart does not seem to give me access to the header of the HTML page, so I don't know how to set up the internal CSS rules and I don't know if there is even a way to use an external CSS document.

So I try to do most with old-school HTML formatting only. But it still does not work. Most of the instructions I found online involve the use of internal or external CSS that is not an option. So I tried to copy my code HTML of OpenCart editor and paste into errors of the W3C checker, and he too said to use CSS. He also said the < center > element is deprecated, but it is one of the few things that seems to work in OpenCart.

What I have a problem with formats, sizes and colors of the h1, h2 and h3, but for some reason, it is inserted extra semicolons, equal signs and quotation marks, as well as spoiling disclaimers which follow. So I have to do something wrong, but the W3C is not telling me what formatting symbols I should use instead.

So I tried to paste my HTML code in a free code editor, I found called "Media" which seems to be an Adobe product, also, but I couldn't find a separate forum for this category. If there is a more appropriate forum category to post this in, I'm open to suggestions. I was hoping that he could give me more Visual cues as to what I'm doing wrong, but so far, no.

If anyone knows how I can format the following using only HTML and no CSS (including where and when I have to use colon or semicolon, equal signs and quotation marks, and if it is better to use pixels or ems for font size and RGB hexadecimal color codes or numbers):

I want a h1 which is bold (although the default value is "BOLD" is fine), 48px or 3 - 4th and RGB 228, 25, 50 or #e41932

I want the h2 which is "BOLD" (default is fine), 18px or 2 - 3em, default black color is fine.

The default size and color for the h3 is fine, but it seems to enlarge the next paragraph, even if I have the < h3 > < appropriate / h3 > < p > and < / p > tags (although I have a soft back between them, if that makes a difference).

In addition, no matter how I try to format the headers, they seem to break up the text of the following warning, which makes them bigger even if I use the appropriate heading and paragraph tags.

Once again, if there is a better forum to post this in, please let me know. Or, if there is a kind of another forum on the internet where I can ask for help about HTML, please let me know.

Thank you very much!

The age-old battle with it's your system.  It's very likely you locking to make style changes because it is all handled the external file system-wide.  You cannot download your own separate HTML page on your server and use it for your landing page of YELP?

Nancy O.

Tags: Dreamweaver

Similar Questions

  • Unable to create the new folder, allows only new Briefcase

    my request to create a new folder allows only a Briefcase.  I want to create a standard folder.

    How to remove and restore the default context Menu items 'New' in Windows 7 and Windows 8
    http://www.SevenForums.com/tutorials/28677-new-context-menu-remove-restore-default-menu-items.html
     
     

    Tip: When you save the text in Notepad, the default file format is .txt. Replace all files.
     
     

  • Why Firefox displays a few pages in html only and others partially in html? I reloaded firefox and java. I use XP OS and Firefox 10.0.2

    I'm not having this problem in Internet Explorer. I have whitelisted installed in addition to my Firefox browser. I tried to turn it off on You Tube pages, and that always display in html format only. Other that this information, there is no relevant details other than those who provide in my question. If there is some information that you need that I forgot, please contact me by email and I'll be happy to provide the necessary information problem.

    Thank you. The solution ' press Shift and click reload. "solved the problem. Thank you very much!

  • Unable to save the Page as that received the error "ga.js could not be saved, because the source file could not be read." Try again later or contact the server administrator.

    Unable to save the Page as that received the error "... ga.js could not be saved, because the impossible source file read try again later, or contact the server administrator.

    You have installed the Ghostery add-on or something similar?
    It can block Google analytic and .js file could not be read.

  • 5.5.3 pages does not open files created with pages 5.6.1

    Hello

    I have a problem, one of my computers I have Pages 5.6.1. I have many files created with the most recent version of the Pages 5.6.1.

    The problem is that I can not open files created with Pages 5.6.1 use another computer with Pages 5.6.1.

    These files are not compatible? I get an error or anything like that, they simply do not open (nothing happens).

    Thank you

    This is a known issue. Update both machines to v5.6.1 Pages (providing you have Yosemite 10.10.4 or later). Unfortunately, v5.6.1 Pages can also forget open documents of his own creation.

  • Unable to create the disc of recovery on my Equium P300-19O

    I am unable to create a recovery disk. I get an error code: 020150-20-00000000 and the F:106557xsp4.swm file missing message. When you create the disc 1. Two disk does not work either.

    I think it's important to do these recovery disks, but I have already lost 5 discs already. Is there any help that anyone can give.

    Thank you

    The hidden restore partition has been deleted or changed?

    Perhaps the hidden partition was damaged because of a loss of power or something.

    You should test the memory and the disk using Memtest: www.memtest.org and DFT: http://www.hitachigst.com/hdd/support/download.htm

  • Screen flickers on Satellite L300 and I am unable to create a recovery disk

    Hi all

    I just bought a model L300 PSLB0C 08R08C number.
    I was unable to create a recovery disk, I was getting an error message saying it cannot create disk because it is scratched or has dirt on it, I lost 5 nine DVD.

    I am went to the store and replaced by another unit, but had the same problem (I have not tried a different brand of DVD well)

    Second issue with this device, the screen flashes once whenever it is in a shutdown state.
    Number 3, the wireless card disappears from the Device Manager, until I restart.
    Laptop made in China ;-)

    Any suggestions are much apprecaited

    Hello

    It is indeed strange that you were unable to create a recovery disk, and that the problem has resurfaced, even after permutation of the laptop with another unit of the store. However, if you have not tried a different brand of DVD so I suggest that if the laptop asks the disc is scratched or has dirt on it. I'm not sure if toshiba factory in fact blank DVDs, but if they do, it would be a starting point, as one would expect hardware toshiba would happily work with their own brand DVD media. However, if you can't find toshiba dvd then use another trust mark, for example, Imation and TDK. with my experience, I have tried many brands of DVD and have found very reliable TDK.

    regarding the second question, this may be related to the graphics card in the system, or could be due to the performance of the computer laptop itself. Check that you have the latest driver for your graphics card and all the settings on the computer are optimized / hard drives are defragmented and deleted unnecessary files. with your third question, this question could also be related to driver problems, check your regional drivers toshiba site for the latest drivers again. failing this, I would back up your data and then restore to a factory condition, then install the drivers immediately. I hope this info can help you somehow.

    Welcome to the forums and please leave helpful points or correct answer for any useful advice that has been given in response to your problems (e.g. to read the forum rules)

    concerning

  • When I try to connect directly in multiplayer FSX without gamespy, every time I get an error message saying: unable to create the connection to the host.

    When I try to connect directly in multiplayer FSX without gamespy, every time I get an error message saying: unable to create the connection to the host.

    I need help
    Kind regards

    Thank you very much!

    To host successfully a FSX session what follows is the key enabling

    my client (s) to join my host FSX session!

    "Players Maximum (for a shared together plane 2) leave the locations reserved for friends to 0 set."

    6122 6112 UDP port translation FSX multiplayer traffic of my remote 2 wire gateway to my router Linksys Wireless N DMZ to access game FSX host...

    Only a single router in my configuration of the DMZ, the external network to the router,

    in this case, the 2 wires, had defined port forwarding.

    Am now enjoying Gamespy (R.I.P.) FSX free hosting for my MP FSX sessions via direct connection.

    5 high to the author!

  • Unable to create DirectX device

    I used to play 'FREECELL' until I finished the game I left for a few hours and when I came back to my computer, there was an error that says error: unable to create DirectX device. I closed the error box and everything seems to work OK.

    Hello

    I had the same problem until I uninstalled a program to screen saver

    Hope this works

  • I can't install Windows 7. It is said that "the installation program was unable to create a new partition system or locate an existing partition of the system", when I chose I have hard drive and my C: / drive is not there!

    I have 3 drives hard, but windows 7 install only 2 (im of a facility in xp) see of them. The strange thing is that it can not see my HDD with xp on?

    I tried to install it on others, but it says "Setup could not create a new partition system or locate an existing partition of the system" and hard drives are: 1 is logical, 2nd is system, 3rd is primary. WHAT SHALL I DO PLZ! I really need help!

    Hello

    I suggest you to see link below and check if it helps.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/Setup-was-unable-to-create-a-new-system-partition/92c682dc-A759-49b9-A235-e84d13db6a96

    http://social.technet.Microsoft.com/forums/en/w7itproinstall/thread/9e18e169-f77e-4026-B22F-f602e670d55c

    Hope this information is useful.

  • Error "Unable to create cache. The file or directory is corrupted or unreadable. »

    Original title: cannot create the ReadyBoost Cache

    Win7-64 bit-8gbRam use Flash drive for ReadyBoost cache HP16gb now receive the message: "unable to create the cache. The file or directory is corrupted or unreadable. "Should I delete the old cache file and try again, or is there another solution? Thanks for any comments.

    Well Ok,

    Run a check disk on the USB and see if it detects any errors.

    Refer to the article below for assistance.

    Check your hard drive for errors
    http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • HP 630: unable to create hotspot wifi in hp630

    I tried to create wifi hotspot in my laptop HP 630. I also tried software called mHotspot , but I'm unable to create hotspot. Also called HP Wireless Assistant software HP is not working properly for some time. When I try to open it, it displays the error message and closes saying enougn nt information. Please help with this!

    Hello Mohit, not all wifi cards support Wi - Fi hotspot if you could specify your card wifi series or model number, it would be a great help.  The hp wireless assistant is not mandatory but is recommended for your pc and have you tried to update the program to the latest version?

    -Hpestell

  • Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel. Got the unable to create the specified task

    Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel.
    Got the unable to create the specified task

    Hello

    What is the exact error message received when the problem occurs?

    Methood 1:

    Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps in the following link:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833 

    Method 2:

    You can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    I suggest to put the computer in a clean boot state, and check if the problem persists, see the link:
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: See step 7; Reset the computer to start as usual after troubleshooting is performed.

    Method 3:

    You can temporarily disable the security software and check if the problem occurs. Check out the following link to do the same thing:

    http://Windows.Microsoft.com/en-GB/Windows-Vista/disable-antivirus-software

    Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    I hope this helps! Let us know if you need more assistance.

  • After I 'google' a web site address, I am unable to access the page directly by clicking on the link in the address; the page hangs and does not respond.

    After I 'google' a web site address, I am unable to access the page directly by clicking on the link in the address; the page hangs and does not respond.

    What antivirus you have installed before? Is the virus/malware-free system? If you have a current antivirus installed and you went through at least some of the malware removal steps I list in the link I have given if you are sure that the system is clean, uninstall McAfee and see if that solves your problem. If you connect to the Internet behind a router, you can be sure for this quick test. If you are connected directly to a cable/dsl modem, then firstly download Avast or even Microsoft Security Essentials (both free). Then, disconnect from the Internet and uninstall McAfee. Install the antivirus of your choice and test. If all goes well, your problems have been caused by McAfee. This is not surprising since McAfee is perhaps the worst choice for safety, we could do.

    If you had any antivirus installed before McAfee, then you must go through all stages of thorough removal of malware listed in the my link before anything else. MS - MVP - Elephant Boy computers - don't panic!

  • WordPad - "unable to create new document.

    I icon shortcuts for wordpad on my desktop, when I click on it, I get this msg to completely useless error: "unable to create new document. I've been tracking the file real worpad.exe and clicked on it. same result. I thought it might have something to do with permissions one / or privileges, but these topica information is written in some techno-charabia eccentric who resembles no known human language.

    Any suggestions? I am running win7 Home premium.

    I icon shortcuts for wordpad on my desktop, when I click on it, I get this msg to completely useless error: "unable to create new document. I've been tracking the file real worpad.exe and clicked on it. same result. I thought it might have something to do with permissions one / or privileges, but these topica information is written in some techno-charabia eccentric who resembles no known human language.

    Any suggestions? I am running win7 Home premium.

    "I found a file named ' write.exe" it's just wordpad under another name. I created an icon of office for that file and it works. No stupid useless error message.

Maybe you are looking for