Unable to create the disc of recovery on my Equium P300-19O

Similar Questions

• VDDK v1.2 is unable to create the disc on the other file system

  I work on one file system other than NTFS for Windows and should be able to create a virtual drive it.

  Using the new v1.2 VDDK, I try the following command:

  VMware-vdiskmanager - c - a free - 0 TS 70 GB
  .pdvfs\myserver\2\CarlData\CarlData.VMDK

  It fails with the error:

  Unable to create the disc: the file is too large for the filesystem (0xc00000015).

  With the help of the utility even 1.1 VDDK works very well.

  If I map the 'share' to a drive letter, the next command in the V1.2 works too well:

  VMware-vdiskmanager - c - a free - 0 TS 70 GB Q:\2\CarlData\CarlData.vmdk

  I know from painful experience last year that the error "the file is too big" is pretty generic, and generally means vixdisklib think that the target file system is not NTFS.  I changed my driver year last to convince vixdisklib v1.1 it was OK to create a large virtual drive here.  "I also remember that the library is the distinction between a target name starting by".
  "compared to the other with a drive letter.  "Is there something I can do to make the v1.2 to accept the"
  .pdvfs' form of file name?

  I see a sensitive case named streams, acl persistent search for support as defining NTFS for this audit. Can you confirm if you have these?

  Thank you

  Annick

• When I try to connect directly in multiplayer FSX without gamespy, every time I get an error message saying: unable to create the connection to the host.

  When I try to connect directly in multiplayer FSX without gamespy, every time I get an error message saying: unable to create the connection to the host.

  I need help
  Kind regards

  Thank you very much!

  To host successfully a FSX session what follows is the key enabling

  my client (s) to join my host FSX session!

  "Players Maximum (for a shared together plane 2) leave the locations reserved for friends to 0 set."

  6122 6112 UDP port translation FSX multiplayer traffic of my remote 2 wire gateway to my router Linksys Wireless N DMZ to access game FSX host...

  Only a single router in my configuration of the DMZ, the external network to the router,

  in this case, the 2 wires, had defined port forwarding.

  Am now enjoying Gamespy (R.I.P.) FSX free hosting for my MP FSX sessions via direct connection.

  5 high to the author!

• Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel. Got the unable to create the specified task

  Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel.
  Got the unable to create the specified task

  Hello

  What is the exact error message received when the problem occurs?

  Methood 1:

  Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps in the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833 

  Method 2:

  You can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  I suggest to put the computer in a clean boot state, and check if the problem persists, see the link:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: See step 7; Reset the computer to start as usual after troubleshooting is performed.

  Method 3:

  You can temporarily disable the security software and check if the problem occurs. Check out the following link to do the same thing:

  http://Windows.Microsoft.com/en-GB/Windows-Vista/disable-antivirus-software

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps! Let us know if you need more assistance.

• SyncToy 2.1 has stopped working, with the message "unable to create the folder pair. Unable to create the provider. Can I get help to fix it please

  After the last automatic update, I tried to back up my files (did this every week for at least one year). Message "unable to create the folder pair. Unable to create the provider"came. I tried again, same. The pair and tried to reset upward. Same message... anyone have an idea how to fix?

  Hi Steve,.

  The question you have posted is related to SyncToy and would be better suited in the SyncFX - SyncToy community. Please visit the link below to find a community that will provide the support you want.
  http://social.Microsoft.com/forums/en-us/SyncToy/threads

  Hope this information helps.

• "Unable to create the virtual SCSI device to the scsi: 0:0" import *. EGGS in ESXi 5.1u2

  Hi, I need to deploy a VM of *.ova in my cluster with 5.1 ESXi hosts u2 (1900470), but when I try to run it I get this error:

  Unable to start the virtual machine.

  Power DevicePowerOn module has failed.

  Unable to create the virtual SCSI device for scsi0:0, ' / vmfs/volumes/51e7fc6b-85806744-fb38-0021286bb22a/xxx.vmdk'

  Unable to create the virtual device. Stack 16 or 255 sectors per track is not supported.

  
  

  The same deployment works in another cluster with 5.1 ESXi hosts (700733) and on my vmware workstation 10.

  I have tryied compatibility material upgrade\downgrade with wmware workstation and download directly to my host but still do not

  I formatted the hard drive hard by ssh and readded to the inventory, I tried to convert vm to work cluster... nothing to see...

  Any suggestions? Thank you

  Solved! I don't know why but the import of virtual machines with 5.1u2 ESXi, heads, and sectors in *.vmdk file are reversed:

  BEFORE:

  ddb.geometry.biosHeads = "16".

  ddb.geometry.biosSectors = "255".

  DDB. Geometry.Heads = "16".

  DDB. Geometry.sectors = "255".

  AFTER:

  ddb.geometry.biosHeads = "255".

  ddb.geometry.biosSectors = "16".

  DDB. Geometry.Heads = "255".

  DDB. Geometry.sectors = "16".

  Connect to a host with SSH and editing *.vmdk file with VI will be the virtual machine starts without problems!

• Unable to create the virtual disk: fault. RestrictedVersion.summary

  Hello

  Im trying to create a virtual disk using the CLI on ESX4i.  The script is:

  vmkfstools.pl - Server 10.190.2.51 - c 20 g d eagerzeroedthick - a free /vmfs/volumes/Internal/test.vmdk

  When the script runs I get error: unable to create the virtual disk: fault. RestrictedVersion.summary

  Can someone tell me why please.  Im trying to create a disk of 20 GB with adapter free with eagerzeroedthick on my internal called storage, (no subdirectory).

  The file system is THAT VMFS 3.33 maximum file size is 256 GB.  The block size is 1 MB.  If it is the block size that is the problem how can I easily change?

  It's in a laboratory, not a production environment.  I need the flag eagerzeroedthick like Im trying to create a passive active cluster node MSCS 2 on a single physical node with 2 machines VMS.

  Thank you.

  Mike.

  If you use the free version of ESXi (U4 and later versions), access to tools like the VIMA API are read-only.

  -Matt

  VCP, vExpert, Unix Geek

• R12 rapidwiz error on node2 - AC-00002: error: unable to create the log file

  Over multiple node R12 on Enterprise Linux 4 installation fees. below error is encountered on node2
  
  AC-00002: error: unable to create the log file
  The installation was successful on the database node and the main node of the Application. On the primary Application node only ' lot
  
  Treatment services are enabled.
  
  However, when installing on the application additional node the rapidwiz is errors
  
  "AC-00002: error: unable to create the log file - $INST_TOP/$CONTEXT_NAME/logs/12202114.log.
  Exception in thread "AWT-EventQueue-0" java.lang.RuntimeException: AC-00002: unable to create the log file.
  $INST_TOP/$CONTEXT_NAME/logs/12202114.log
  
  I tried to install several times but every time it failed with the same message
  
  I think that the reason for the failure:
  
  I am writing on a mounted NFS on Node2. If I access a NFS mount from one server other than of its origin, the root of the application server user is considered person not the user.
  I checked this by pressing a file being logged in as root:
  
  -rw - r - r - 1 person person 0 20 Dec 10:59 abc
  
  I mounted node2 successfully using
  Mount-t nfs nas1: / erparch /erparch
  
  Rapidwiz version is 12.0.0.20
  
  What are the steps to take in order to proceed with the installation on the second node.

  user10126380 wrote:
  I think that the reason for the failure:

  I am writing on a mounted NFS on Node2. If I access a NFS mount from one server other than of its origin, the root of the application server user is considered person not the user.
  I checked this by pressing a file being logged in as root:

  -rw - r - r - 1 person person 0 20 Dec 10:59 abc

  I think you've correctly identified the source of your problem. By default, the NFS mounts are usually created with the 'root_squash' option, where the user root on a remote system creates its files as the anonymous user ('nobody' in most cases) on the exported NFS volume. It is usually a good practical security; However, in your case, you need to export the NFS volume with no_root_squash to allow the user root on Node2 to create files as expected when you run RapidWiz. Once installation is complete, you should be able to go back to using the default root_squash option, as the following files in the filesystem level of demand will be created by non-root users.

  Your system administrators may not be happy with the idea of an export of no_root_squash, and I wouldn't blame them. :-) If there is dispute, make sure that they understand that it is only for the duration of the installation of the EBS, and she can (and should) be powered once the installation is complete and verified to work.

  These two articles offer a brief explanation of the purpose and value of the NFS mount root_squash/no_root_squash export options.

  Kind regards

  John P.
  http://only4left.jpiwowar.com

  Published by: jpiwowar on December 21, 2009 21:38

• import problem ORA-01658: unable to create the STARTING point for the segment in your

  I created the above tablespace
  
  create tablespace SAMPLEDATA
  DataFile ' / u01/app/oracle/oradata/sample/sampledata01.dbf' size 50 M autoextend on next 10 M maxsize unlimited
  logging
  Local extended management
  segment space management auto
  Flashback on;
  
  create SAMPLE user identified by usrmringnew
  SAMPLEDATA default tablespace
  tablespace temporary temp;
  
  
  Import from 9 to 10r2
  
  IMP fromuser = touser = sample indexfile=/home/oracle/import/production/export/import_productionddl_20081007.log file=/home/oracle/import/production/export/production_export_20081007.dmp log=/home/oracle/import/production/export/production_import_20081007.log production system
  
  Unfortunately, it gives the error
  
  ORA-01658: unable to create the measure INITIAL segment in tablespace
  
  could someone kindly help me on this?
  
  Thank you very much!

  Hello

  As you can see, your data file specifications need to increase of 10 M, but your file system has only 3.7 M of available, that is why the server is unable to increase the size and you get this error message.

  Solution - you can use one of following:

  1. move the data file to a point of editing with sufficient space.
  2 - Add a new data file for the tablespace and host this data on a new mount point file with sufficient space.

  Published by: sanjayIndia on October 8, 2008 09:02

• Unable to create the 3rd recovery disk

  Hello
  I am
  get an error when you try
  to create the 3rd DVD+ R.when it check 2% who say the message "that we live."
  Recovery media errors
  creation. Please try again. »

  Pavilion dv6-6113tx
  number-LZ765PA
  Core i5 W7 home premium
  pls help
  Sohag

  Hello

  Here's another suggestion that may help.

  Start Notepad and let Windows load completely.  Hold down the Windows key and press R.  For the run box, type msconfig and press ENTER.  In the System Configuration window, click the Startup tab, uncheck the box next to each startup item and then click on apply to apply the change.  Restart the computer and see if you can now get 3 disc to burn and check - as I suggested earlier, if it creates all the other disks before starting the window System Configuration and re - allows objects of start - stop and try again.

  Kind regards

  DP - K

• Re: Unable to create the recovery DVD

  Hello

  Here I once again m.

  The seller told us to create a recovery DVD (CD).

  I go to Toshiba-files and click on create the recovery CD and the programm "told" to insert 1 of 2 DVDs.
  I did.

  But after awhile the laptop end / cut in writing.
  He can't write E:\Boot\fonts\chs-boot.ttf second message, I try a front message, I don't remember, but something like the second)

  So now I can't create the recovery DVDs

  What to do now?

  Thanks for the replies

  Toshiba satellite L550D 13V P * SE (* = I remember - you can see exactly to my other question about catalyst)

  Hello

  The seller tells you good advice. You should do it. I recommend you try a dvd - r blank of high quality like Verbatim or Tdk. You see, creator DVD doesn't accept poor quality, media.

  Read this thread, please:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=55751&TSTART=0

• Unable to create the virtual placeholder on recovery site

  Hi, I need urgent help to set up RS. When creating a protection group and choosing the position expressed the message (not replicated) LUN

  'Could not create the VM space reserved on the recovering site' is generated for each virtual computer.

  SRM has administrator permissions on both sites - why the placeholder VMs not get born - is it a permission problem, and how this is over?

  Thank you

  and also create alarm to moniter the use of resources of the site the site recovery both.

• Questions about the discs of recovery and partitioning Satellite A200-QH0

  I bought a model of Satellite A200-QH0 in Australia and due to the lack of forums in our country, I would like to ask a few questions here if that's ok.

  The book contains 3 partitions - partition "EISA Configuration" of 1.6 GB, the great partition of the BONE and the recovery partition. So I did the recovery DVD? s using the Recovery Disc Creator tool, as we are not provided with a real disk. But I would like to know what will make these records? My questions:

  1. they really will return that disc hard back to the _exactly_ how he was including the partition layout and software pre-installed?
  2 will be the recovery DVD works even if the disk has been repartioned? I would like to divide the system partition to give space for the files of data etc. But this extra partition will stop the recovery procedure works correctly?

  Please understand that I'm not interested in reformatting the entire disk. I want to just split the partition from the OS. But in case I need to replace the disk in the future or something, I would like to know how to close to 'original', these disks will make me, no matter what I do on the disc?

  Thank you
  Dave

  Hello

  I m not 100% sure how recovery works on the Australian laptops computers Toshiba, but I presume that the restore CD contains the image of Toshiba with the operating system Windows, drivers, tools and utilities.
  I think that if you want to use the recovery CD then the whole HARD drive will be formatted and all partitions will be erased.

  I think that the recovery partition is not created using the recovery CD because the CD of restoration has already been created for the recovery partition is no longer necessary

  Concerning

• Problem creating the disk hard recovery Satellite A200 + touch pad

  So I lent my laptop to my daughter until she could get enough to buy a PC.
  Well, I got it back that only she has installed a bunch of stuff to the point where it is blowing on vista even after than my attempts to clean I decided to start the laptop using the creation of recovery disk came with the laptop.

  But now, I used about 8 dvd discs, trying to create a good drive but I restart fr. with the disc in... nothing happens. I'm trying to spend directly in vista... and he says can not read the disc. I've recreated the disc several times and the same result and well, it was the only type of restore disc that came with the laptop]

  Also as I've gotten at the time when I use the touchpad my cursor is jumping around, is that fixable?

  Thanks in advance.

  Hello

  Sorry, but something must be wrong in your post. As far as I know Satellite A200 comes with original Toshiba Recovery DVD. You should not create anything. New laptops like A300 do NOT come with DVD recovery and each laptop user, it should only create, but not with Toshiba Disc Creator. For this Toshiba application offers another tool. The name is Toshiba Recovery Disc Creator. It is not the same tool. So you have probably original Toshiba drive.

  So if you have it please use this recovery DVD as described in this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=37706

• Pavilion 17 TS PC notebook: How can I create another disc of recovery?

  My laptop came with Windows 8, but I have recently installed windows 10. I made a disc of recovery originally but now I think I need to make another as operationg system has changed. How can I do that. I get the message that I am only allowed to create a recovery after disk and it has already been done.

  Hello:

  A new set of recovery W10 media cannot be achieved in the conventional way.

  W10 will install on the C:\drive with no changes made to the recovery partition.

  What you can do after the installation of the W10 is to create an image of the installation process again once you have everything set up as desired.

  There is an image option (windows 7) to create a system in the control panel.

  Get a portable hard drive to save the system image on.  You can replace the image when you want with a newer version.

  Then, go to the Microsoft site and create a media installation/repair Windows 10 from the link below.

  https://www.Microsoft.com/en-us/software-download/ windows10

  To access the system image that you created, you start W10 (Flash DRIVE or DVD) media, you have created.

  On the lower left side to install it right now the window is a repair option.  You select the repair to access the system image that you created.

  Or with the media that you create from the link above, you can reinstall W10.