I'm unable to locate the tool capture on my computer.

Similar Questions

• "Unable to locate the document capture recognition service. Your installation is perhaps corrupt '-Adobe Acrobat 2015 (2015.008.20082) someone had the same number on this version in a .pdf conversion/export to MS Word 2010?

  Hi all

  I saw this same error appear around the web, but none that relate to Adobe Acrobat Pro DC (2015) and MS Word 2010. Has anyone encountered this same flaw/message when you try to convert/export a pdf file to MS Word 2010?

  After clicking OK several times (through the above message), the export moves in any case, is there a way to maybe get rid of the messages coming, just to make the conversion to operate?

  As an accompaniment, this isn't a problem with the help of MS Word 2013 with Adobe Acrobat Pro DC (2015), but I would like to know if anyone has found a fix work for this export/conversion to Word 2010 (I may be among the masses here with this, but just in case where anyone knows of a fix for this).

  Thank you for your time and any advice greatly received.

  -Pete

  Hi Psymon,

  There will be no change in the application, updates are just to fix some reported bugs. This will improve the user experience.

  Kind regards
  Nicos

• Error 'nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll is not found"when you connect to the computer.

  Original title:

  Problem: I use DeLL Desktop.When I connect, these messages appear on my screen: nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll not found. Re-installing the application may fix the problem. Pls help. Thank you.

  Hello
  1. what version of Windows is installed on the computer?
  2. are you aware of any changes made to the computer, before the show?
  Assuming you have Windows Vista or Windows 7, follow the steps mentioned below.

  Method 1:
  

  Step 1: Perform a boot minimum troubleshooting and check which application reports this error
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: once you have determined the problem by using a clean boot procedure, follow step 7 in the article to restore your computer to normal startup.

  Step 2: reinstall the application.
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Method 2:
  Run an analysis of auditor of system files on your computer and check for the issue.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  I hope this helps.

• Viva Piñata was unable to locate the DVD - ROM drive

  Hello!

  I installed the game Viva Pinata on Windows XP Pro in English when I try turn on the game there is a message like: unable to locate the DVD - ROM drive.

  On the other computer (Windows 7) it works very well!

  What does not help?

  -Instalation of safedisc.exe.

  Help me please!

  Hi MarcinKowal,

  ·         Did you do changes on the computer before the show?

  ·         The installation of the game Viva Piñata was successful?

  You can read the following article and check if the problem still persists.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  Let us know if that helps.

• I've recently upgraded to Windows7, now I'm unable to locate the Toolbox of printer (ink cartridge levels).

  I've recently updated to Windows7, now I'm unable to locate the Toolbox of printer (ink cartridge levels)

  original title: the printer toolbar

  Download the right driver Windows 7 from here:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=3192753

• at the beginning until you get a message-"Unable to locate the DLL:\language\english.dll language" - How can I get rid of this?

  at the beginning until you get a message-"Unable to locate the DLL:\language\english.dll language" - How can I get rid of this?

  at the beginning until you get a message-"Unable to locate the DLL:\language\english.dll language" - How can I get rid of this?

  Have you Spy Sweeper and uninstalled the software. It seems that other software can also use this driver.

  You can delete the entry start and the error using Autoruns.

  To identify what loads when you start using Autoruns (freeware from Microsoft).
  http://www.Microsoft.com/technet/sysinternals/ProcessesAndThreads/Autoruns.mspx

  With Autoruns, you can deselect an item which disables startup, or you can click with the right button on an item, then remove it. If you clear the check box that you can check back for re - activate the element. It is an approach much safer than editing the registry and better than using msconfig.

  Another useful feature of the program is that you can click with the right button on an item and select search online to get information about the selected item.

• I'm unable to locate the WORKSTATION. Where should I look?

  I'm unable to locate the WORKSTATION.  When I had windows 98 that was on my desktop but on my new computer, it is not and I don't know how to locate it.  I'm not computer savvy, so I would appreciate if possible very simple instructions.  Thank you kindly.

  In Vista, 'My Computer' is called 'computer '.  'My computer' no longer exists except as a junction file for backwards compatibility--a folder you will never need access to and shouldn't try again. Click Start (the ORB round to the left of the toolbar at the bottom) and look at the buttons on the right next to the screen.  We'll tell the computer.  Click on that no matter what you are in Windows Explorer at a very high level.  You can also click on your user name to go directly to your user profile, or you can click on Documents to go to your user documents.  You can check all the links on avialble at your leisure.

  If computer (or other default Windows desktop icons are missing, here is an article on how to recover: http://www.howtogeek.com/howto/windows-vista/restore-missing-desktop-icons-in-windows-vista/.)

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Unable to locate the output interface...

  Hello

  I configured a VPN of Lan Lan 2 and it works fine.

  VPN use IKEv2 authentication and certificate.

  

  Computer 1 can reach 2 computer without problem.

  Computer 1, I tried to access the intellectual property inside 2 (ping, AMPS...) but I get this error: unable to locate the output interface

  I do not understand why I can access computer IP 2 but not intellectual property inside 2 people 2 IPs are on the same network and packets go through the same features...

  How can I solve this problem?

  Thanks for your help,

  Patrick

  Hello

  I imagine that the two devices we're talking about are firewalls Cisco? I mean the VPN devices.

  Firewalls Cisco do not allow ICMP behind an interface to another interface on the same device. The only exception is when traffic is coming through VPN and enter a configuration command specific to the device that you're trying to ICMP behind a VPN connection.

  So if 1 computer needs ICMP inside 2 then the firewall with 2 inside interface must be configured with the command

  access to the administration

  Same configuration is required on the other firewall if 2 computer needs ICMP inside 1

  It can also be NAT associated configurations that may require changes, but it depends on the level of your firewall software which we don't know.

  -Jouni

• How to start the tool captures

  Windows 7. How to start running the tool captures? Cannot be found in the start menu. How about a keyboard shortcut?

  What version of Win7? Starter and I think that basic home edition does not include the capture tool.
   
  Type cutting tool in the start menu. Search box. If you find, create a shortcut on the desktop.

• When I opened my project and it is unable to locate the files. I find the files that are 'missing' and open the project.

  Hi im quite new for first pro and I'm having a problem when I opened my project and it is unable to locate the files. I find the files that are 'missing' and open the project. Everytime I open the project everything I see is all that media have these red, pink, blue, green, yellow lines, where pictures should be. And there is also the title of my pictures in the upper left corner. No one knows what it is and how I could fix this?

  [title published by mod]

  [Please do not double post, deleted the other]

  Right-click on the images in the project window: recharge or replace it.

• FRm-40741: unable to locate the plug on block 11

  Hi all
  
  I use this custom property defined when press the button Search "FRm-40741: unable to locate the plug on block 11" error getting.
  
  If: XXEAM_SHUTDOWN_DETAILS. WF_STATUS = "Not sent yet!" then
  Set_Custom_Property('XXEAM_SHUTDOWN_DETAILS.) WORK_ORDER_NO',: SYSTEM. TRIGGER_RECORD, "ENABLED", TRUE);
  Set_Custom_Property('XXEAM_SHUTDOWN_DETAILS.) ESTIMATED_START_DATE',: SYSTEM. TRIGGER_RECORD, "ENABLED", TRUE);
  end if;
  
  
  Please give me any other property for record wise work instead of Set_Custom_Property.
  
  Kind regards
  Maha

  Finally, I had a few minutes to play with my sample form and found out that Andreas is correct when he said:

  SET_CUSTOM_PROPERTY does not have the number of the logical record as a parameter, but 'the physical line number' in the layout.

  In my example of form, as I scrolled items folders "Enabled" has not changed with the records.

  *@Maha,* my apologies. In order to apply the desired effect, you will have to imitate the enabled property for each record by using a combination of the Set_Item_Instance_Property() WATERWAY integrated, INSERT_ALLOWED, UPDATE_ALLOWED and VISUAL_ATTRIBUTE (optional) properties. Because you change many properties, I so wrap it in a procedure called ENABLE_ITEM and past the point, the file number and activate settings. For example:

  /* This procedure assumes you have a VISUAL_ATTRIBUTE                 */
  /* created called 'ENABLED' and 'DISABLED'.  In my example,           */
  /* I created the DISABLED visual attribute with following properties: */
  /*  Foreground Color = DarkGray                                       */
  /*  Background Color = gray12                                         */
  /* The ENABLED visual attribute does not specify any properties so it */
  /* sets the above properties back to                     */
  PROCEDURE enable_item (inItem VARCHAR2, inRecord NUMBER, inEnabled BOOLEAN )IS
       paramCount     NUMBER := 0;
  BEGIN
       IF ( inEnabled ) THEN
            Set_Item_Instance_Property(inItem, inRecord, INSERT_ALLOWED, PROPERTY_TRUE);
            Set_Item_Instance_Property(inItem, inRecord, UPDATE_ALLOWED, PROPERTY_TRUE);
            Set_Item_Instance_Property(inItem, inRecord, NAVIGABLE, PROPERTY_TRUE);
            Set_Item_Instance_Property(inItem, inRecord, VISUAL_ATTRIBUTE, 'ENABLED');
       ELSE
             Set_Item_Instance_Property(inItem, inRecord, INSERT_ALLOWED, PROPERTY_FALSE);
            Set_Item_Instance_Property(inItem, inRecord, UPDATE_ALLOWED, PROPERTY_FALSE);
            Set_Item_Instance_Property(inItem, inRecord, NAVIGABLE, PROPERTY_FALSE);
            Set_Item_Instance_Property(inItem, inRecord, VISUAL_ATTRIBUTE, 'DISABLED');
    END IF;
  END enable_item;
  

  You then call the ENABLE_ITEM procedure in your code, passing the name, registration number and activate (true or false) disable your element. For example:

  If :XXEAM_SHUTDOWN_DETAILS.WF_STATUS = 'Not Submited Yet!' then
     enable_item('XXEAM_SHUTDOWN_DETAILS.WORK_ORDER_NO', :SYSTEM.TRIGGER_RECORD, TRUE);
     enable_item('XXEAM_SHUTDOWN_DETAILS.ESTIMATED_START_DATE',:SYSTEM.TRIGGER_RECORD, TRUE);
  end if;
  

  Options François and Steve mentioned are also good ways to do this as well.

  Sorry if I confused the issue earlier.

  For those who suggested to use SET_ITEM_PROPERTY('BLOCK_NAME.) Nom_element', ACTIVE, PROPERTY_FALSE), do not forget the cascade effect of assigning false to the ENABLED property of an element. When you ACTIVATE your story later, you must also set the properties MODIFIABLES NAVIGABLE, UPDATE_NULL, true.

  Craig...

  Published by: Silvere on 16 January 2013 14:15

• Message "Unable to locate the hard drive" after using XP Pro recovery disk

  I used my reinstall windows Home drive to recover a file system corrupted on a windows operating system pro. I hit the 'R' to repair key when he asked but now when I rebooted... I get a message "unable to locate the hard drive. Does anyone have an idea what went wrong? And I order a Windows OEM Pro installation disc and just do a clean install?

  
  

• Outlook Express could not be started. The application was unable to initialize the store directory. Your computer may be out of memory or your disk is full. Error code: 0 x 80007114

  Operating system Windows XP, at startup, I get the message: "Outlook Express could not be started. The application was unable to initialize the store directory. Your computer may be out of memory or your disk is full"and displays the error code: 0 x 80007114.  (I have a new drive hard with enough space) Outlook Express always open well and functioning normally.  The message mentions and how to fix the problem?  Thank you, Rick

  Jump here (nothing Bruce suggested is false), I did a search and found this old article (http://support.microsoft.com/kb/245419), which indicates that there is a bad entry under the identity key in the registry (see www.oehelp.com/backup.aspx for background).  So if it's a big problem, you can do the steps suggested in this article and that will fix it.  Or if you have just one account, then backup your settings and the identity key and then delete the identity key and then start OE and it will establish a new, and you can then set up your account again, and then import the messages from the older directory.  But it does not indicate the major corruption, so you can just ignore it.

  Steve

• I am unable to do the windows updates. My computer States tries to install 1 of 25, but no progress.

  I am unable to do the windows updates. My computer trying to install updates, but is blocked to install 1 of 25 updates.

  What should I do now?

  Thank you very much. I solved the problem using Fixit after a suggestion of TaurArian.

  Also, he told me how to not to receive other suggestions.

  Thank you for your help.

  Susan J.

• I am unable to do the windows updates. My computer States trying to update 1 of 25, but no progress.

  I am unable to do the windows updates. My computer States trying to update 1 of 25, but no progress.  I tried several times without success.

  Suggestions:

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  Diagnose and automatically fix common problems with Windows Update
  http://support.Microsoft.com/mats/windows_update/

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997