I'm unable to take backup of database MS SQL clustered, while it uses in the live production server.

Similar Questions

• BlackBerry Smartphones unable to take backup

  Hello

  I'm trying to backup data on my "BOLD" and in this case. It starts and produces normally until it reaches browser data Cache, then it gives an error "Error in backup of databases".

  Someone can help, as I'm trying to save so I can upgrade to the latest firmware.

  Your help and advice is much appreciated.

  Thanks guys,.

  a2zT

  Have you tried to clear the cache of the browser?

  Open the browser, Options > Cache operations > erase history and content, and the pushed content.

  Try the backup again, if nothing else, go back and delete cookies also.

• Is it possible to take backup of database of POS

  Is it possible to take a backup of POS data on disk or tape? Aims to save this database to a remote site so that if POS database gets corruput, VMs supported by VDP can be restored.

  Thank you

  Sanjeev

  Hello

  Welcome to the communities.

  Yes you can do it.

  http://www.VMware.com/in/products/vSphere-data-protection-advanced/features

• Take backup of database...

  Hi all
  First of all, I do not know whether this question is appropriate in this field so sorry for this post.
  
  I want to take a backup of my database periodically and automatically I say a week at 05:00 every Sunday, is it possible?
  I searched the internet for several tutorials; There are 1000 of them :)
  My question that you trust. A poster of the reliable and proven to explanations of the backup links can.
  Thank you
  
  Published by: USS October 2, 2009 12:06 AM

  You can use the following tutorial that should be easy to adapt to your needs: http://www.oracle.com/technology/pub/articles/havewala-rman-grid.html

• Unable to take backup, Error 80070002 in Windows 7

  Original title: backup error 0 x 80070002

  Hi, I checked on a large number of posts and can't find the answer. I tried the FIX, but it is NOT APPROPRIATE for my computer. I looked at the profile registry settings, and they are all ok. I turned off MS SECURITY ESSENTIALS and run the back-up and it always fails. I also did a scan (and check and fix errors) the disk backup and the C:\ drive. Out of options! Hand out and buy third-party software, is there another way to get this problem corrected?

  Thank you. I does no significant changes to the computer and have only been using it normally. The error message when I developed it was: THE SYSTEM cannot FIND THE SPECIFIED FILE. Error CODE: 0 x 8007002 with the time and location of the backup. I read the error log and it mentions a file that it could not find, but the file is there. Whenever I run the back-up and it failed, the error log under a different file name - but was there, every file on the computer.

  I tried method 1 and went for scenario 3, but he said that the program was not compatible with my machine. I ran the SCAN DISK via C:\ > PROPERTIES > TOOLS > ERROR CHECKING and it was very good. I tried to run the back-up every day with the same error message.

  However, yesterday (2 weeks after it stopped working) it was the day that the back-up functioning normally and it worked fine. So although I now have a back-up job I really did nothing to fix it, it just fixed itself.

• Unable to take backup on Windows 7 get error code 0 x 81000019 and message backup Windows found errors on the media during a backup on it and can't use it for additional backups.

  Original title: backup Windows found errors on the media during a backup.

  original title: backup errors

  Whenever I try to do my monthly backup I get the following messages

  Backup Windows found errors on the media during a backup on it and can not use it for additional backups.

  Pleas write the following label on a blank media and insert it into D: /.

  I did and then he asked me to get in shape, I say OK and I get the same message on the media errors and I put another disc and get the same problems again. I can't find out what the problem is, what can I do to fix this problem and get a new backup?

  I now have an error 0 x 81000019

  Hello

  You did changes to the computer before the show?

  Method 1: Check if the shadow copy volume is running
  (a) click Start.
  (b) in the search box, type Services.msc.
  shadow copy Volume c) right-click and go to properties.
  (d) select Auto (Delayed) in the start menu type in the menu drop-down.

  Method 2: Clean boot
  When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.microsoft.com/kb/929135.

  Note: Once you are done with the boot, follow step 7 of article to reset your computer to normal startup.

  Method 3:

  Check all your drives to NTFS.

  This problem may occur if the drive is not NTFS format.

  Please follow the steps mentioned below to convert the reader:

  Using the Convert command

  1. click on the "Start" button, click "all programs" and click on "Accessories".

  2. right click on "command prompt" and click "run as administrator".

  3. in the window "Administrator: command prompt", type the following command and press ENTER.

  CONVERT %Drive% letter: / FS: NTFS

  letter of %Drive% is the driver that you want to convert. For example, type the following command to convert drive F to NTFS:

  CONVERT F:/FS: NTFS

  4. when the following message appears in the command prompt window, type the volume label of the drive that you are converting, and then press ENTER:

  The type of the file system is FAT.

  Enter the name of the current volume of reader letter %Drive%:

  Type any string of characters for the Volume name. If you simply press ENTER, it will affect 'Local disk' as the default Volume name.

  5. when the conversion to NTFS is complete, the following line appears in the command prompt window:

  "Complete conversion".

  6. restart the computer and check the result.

  Hope this information is useful.

• Unable to activate Windows 7 Professional in spite of being a reinstall of the same product on the same computer

  Hello. I have a computer that was running Windows 7 Professional. The software has been installed on the computer and authentic and purchased several years ago. Due to problems, I had to reformat the HARD drive and reload Windows 7 Professional on the same computer using the same product key.

  Now it will not activate and comes up with an error 0xC004C020 code which States that "the activation server reported that the Multiple Activation key has exceeded its limit"

  I do not understand why this has happened. I bought the copy of Windows 7 Professional on ebay and I have the box, case and the two original disks of Windows 7 Professional, as well as the authentic product key sticker. He was recharged on the same computer that was originally activated copy (same product key)

  I have attached the report of diagnosis MGA below. Would like to find a solution for this. Thanking you in advance.

  Concerning

  aredmond3

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-*-*-*-WW948
  Windows product key hash: + F8x/Z13t6PUnC6SwLq0K0nNUv8 =
  Windows product ID: 55041-050-0514542-86485
  Windows product ID type: 6
  Windows license type: Volume MAK
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {88F218E7-37F3-4D56-A00A-CC6BA6619981} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.130828 - 1532
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program may Explorer\iexplore.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0 x 80070003]

  Other data-->
  Office details: {88F218E7-37F3-4D56-A00A-CC6BA6619981}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-BATH55041-050-0514542-864856S-1-5-21-2782086357-3459354306-4055444517Dell Inc.. Vostro 400 Dell Inc.. 1.0.13 20080321000000.000000 + 00027E03407018400FA0c 090409AUS Eastern Standard Time(GMT+10:00)03DELL FX09 109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, channel VOLUME_MAK
  Activation ID: 9abf5984-9c16-46f2-ad1e-7fe15931a8dd
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 55041-00172-050-051454-03-3081-7600.0000-1652016
  Installation ID: 018164699111361393048692667234003612777274626804435541
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: WW948
  License status: Notification
  Reason for the notification: 0xC004F009 (grace period expired).
  Remaining Windows rearm count: 4
  Time to trust: 2016/06/17 14:05:49

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: n/a
  Beyond: 0 x 0000000000000000
  Event time stamp: n/a
  ActiveX: Not registered - 0 x 80040154
  The admin service: not registered - 0 x 80040154
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: MgAAAAEABAABAAEAAAACAAAAAQABAAEA6GFYoNK/ZP6I/cAdEuLSCdA1GuyMlKAuzDE =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0x0
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC DELL-FX09
  FACP DELL-FX09
  HPET DELL-FX09
  MCFG DELL-FX09
  FX09 DELL SLIC
  DMY2 DELL FX09
  SSDT PmRef CpuPm

  Unfortunately a mass activation key is used by the company to activate several PC and not meant or sold for use by consumers.  Understanding the MAK Activation

  When you mention you bought on eBay that explains it pretty well because there are hundreds of early cases of consumers ripped off on eBay by Volume and TechNet keys sold illegally.

  If you don't have any other Windows 7, 8 or 8.1 license to use for the upgrade, what I would do is go ahead a buy Windows 10 and make the Clean 10 Windows Installer that has no complaints and if you stick with the steps in the link results in the best installation of the best OS who's going to stay that way as long as you do.

• Can we take a backup of database pending?

  Hello

  Can we take backup of database pending when the don't use no DataGuard? If Yes, can I restore that backup of my primary database?

  Oracle 11.2.0.3 Standard

  Kind regards

  Melo.

  Rafael Melo says:

  Jhon,

  Thank you for your quick response. I just did not understand clearly what that means "not being able to depend on RMAN to follow...» ». Please, can you explain that?

  OBS.: the first time that you intend to use on the eve of the database.

  Kind regards

  Melo - Br

  Think of the RMAN Repository. How one will distinguish between files that are part of the primary and which are part of the manual standby? In a Data Guard environment, he can, because you can save all db_unique_names. You do not have this feature with an old manual.

• BlackBerry Smartphones unable to take picture Bold 9780... kindly help!

  Impossible to take the picture. Through the BlackBerry. Expert s/w came to know that a file is missing, named "javax.microedition.media" and show msg "javax.microedition.media.MediaException: Unable to take picture.
  Kindly help!

  Hello and welcome to the community!

  A missing file is difficult to come back in and of itself. On the contrary, a clean reload of the OS is a much better method to retrieve it. The easiest way is, on a PC (you can not do on MAC):

  (1) make sure that you have a current backup and your BB complete... you can find the instructions at the link in my auto-sig below.

  2) uninstall all the BB OS packages from your PC,

  (3) make sure you have the BB Desktop Software already installed

  • http://us.BlackBerry.com/software/desktop.html

  (4) download and install on your computer, the BB OS package you want:

  • http://us.BlackBerry.com/support/downloads/download_sites.jsp
  • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

  5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

  6 (a) to change your level of BB OS installed (at level or lower), you can run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC.

  6 (b) or, for recharging your BB OS level installed as well to change, work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/how-to-reload-your-operating-syste...
  • Note Although written to "recharge" and the storm, it can be used to upgrade, downgrade or recharge any BB device model - depends on the operating system package you download and install on your PC.

  If, during the process of 6a or 6 b, your BB has an error '507', simply unplug the USB of the BB cord and reinsert it. do nothing else... This should allow the installation to continue.

  If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

  • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

  Good luck and let us know!

• How to take backup of workbooks more Scout command line?

  Hello
  I have created folders in Discovrer more and I'm not able to view them in Discoverer Desktop. Now, I want to take backup of these binders. I can do this from the command prompt. If so, how?
  
  ThanQ,
  BB1

  Arun,

  You can find some examples in this link.

  Script to export the repository of discoverer discoverer workbook
  http://www.dbaexpert.com/blog/2007/08/script-to-export-discoverer-workbook-from-the-discoverer-repository/

  Thank you
  Hussein

• "Backup of database error" message blackBerry Smartphones

  Hello

  I have the version "BOLD" 4.6.0.162 and Desktop Manager version 4.7 working with XP SP3.  In the past, I got my phone from backup.  Until several weeks ago, I am unable to back up my phone and received the message "backup of databases error."  It happens at different stages during the progress of the transfer.

  I followed the suggestions posted by françoys, http://supportforums.blackberry.com/rim/board/message?board.id=Bold&message.id=3676&query.id=57237#M3676, but still no go.

  My questions are:

  1 has any who found the solution yet?

  2. can I still perform the update (System, critical applications software, etc. via Desktop Manager) without losing files data base and music and picture my contact?

  3. is the advanced option in the backup and recovery solution?

  Thank you.

  Ok.  I solved the problem.

  I have 'forward' option of backup and moved the point by point.  There were a few elements indicated errors then I "cleaned" them.  Once all items have been moved, I did regularly back up again.  It worked fine now.

  Hope this might help other who is facing a similar problem.

• Is make Journal required for backup of database hot and cold water?

  Hi Experts,

  Please explain--again it takes to backup of database hot and cold water?

  Thank you

  Did you backup managed user or RMAN backup. In RMAN backup, you only need logs archived. But in the cold backup managed user, you don't need the redolog also if the PB was properly arrested. Jut copy the DBF and controlfile and put it there to the target server and during the recovery of redolog files will be created automatically.

  Please note that the database must be correctly stopped before cold backup is taken.

• How to take backup for VCSC, VCSE, MCU and TMS. I'm new in the world of video. A brief step by step would be appreciated

  How to take backup for VCSC, VCSE, MCU and TMS. I'm new in the world of video. A brief step by step would be appreciated.

  You can back up each server by following these steps:

  For VCS, see "Backup and recovery of data from VCS" section in the Cisco VCS Administrator Guide X8.5, page 340.

  For MCU, see "upgrade and save the MCU" section in the Cisco Telepresence MCU series online help 4.5, page 212.

  For MSDS, see back up and restore SQL Server databases you will back up the database of TMS 'tmsng' of the SQL Server itself.  It could either be hosted locally on the TMS server if you have installed TMS with the default settings, or an external user provided SQL server.

• Difference between the backup of database to copy and backup of database

  Hi all

  Kindly differentiate between backup database copy and backup of database.

  Thanks in advance.

  Hello

  With image backups, you have the option of two things:

  1. use these as rman backup and ask to restore them to the desired location (the same that we do in restoration of backupsets).

  2. tell the database to use these files.  This is possible by ' switch database copy. This is useful when the recovery will take a long time.  This allows you to move the users directly to the backup that you restore to the original location.  In other words, your database remains open with the users who access the copy.

  in both cases, you would:

  1 restore a controlfile

  2. the backup catalog

  RMAN > catalogue start with noprompt "/ backup location, in this case copy data files."

  3A. If you want to restore the database, so you might as same as usual:

  run

  {

  Set up until...

  newname Set...

  restore the database...

  recover the database...

  }

  ALTER database open resetlogs;

  3B. If you want to "switch" to the backup, you must run:

  switch database to copy;

  recover the database up to the...

  ALTER database open resetlogs;

  NOTE: before open resetlogs, remember that your online log file location is valid for the server on which you are restoring.  See:

  Select Member from v$ logfile;

  Thank you

  Renu

• Unable to take snapshots

  Hi all

  I really appreciate that you take the time to read my post.  I'm relatively new to vmware and I need assistance.

  One of my virtual machines is no longer shots. I first noticed the problem when our data backup appliance, unitrends, began to report errors when you try to back up the virtual machine.
  Their support was eventually locate the problem of unable to take a snapshot. I confirmed this by trying to take a snapshot directly with Vsphere.

  The exact error I get when trying to take a snapshot is as follows:

  *********************

  An error occurred when taking a snapshot: msg.fileio.generic.

  An error occurred saving the snapshot: msg.fileio.generic.

  *********************

  I am running 5.5 ESXi and Vsphere Client 5.5.0.  I already tried many things...

  
  -Restarted the VM

  -Uninstalled and reinstalled vmtools.

  -Tried to install vmtools without VSS (volume shadow copy)

  -J' have tried different combinations of services are turned on and off. (Instant VMware virtual disk, VSS provider)

  -Follow the following three items:

  (1) KB VMware: cannot create an instant downturn because the snapshot operation exceeded the deadline for...
  (2) http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1031298
  (3) VMware KB: suspended creating snapshot fails with the error: an error occurred during the recording of the snapshot: msg.snapsho...

  -Also tried freeing up space inside the virtual machine itself and that does not work either.

  
  I am at wits end and have unfortunately not support with VM...

  Help, please!

  Summary:
  Snapshots do not work.

  Data backup appliance: Unitrends
  Windows Server 2008 R2 virtual machine

  Home - ESXi 5.5
  VSphere - 5.5.0

  Error:

  An error occurred when taking a snapshot: msg.fileio.generic.

  An error occurred saving the snapshot: msg.fileio.generic.

  Thanks again for your help!

  Hey everybody,

  Just thought I should update.  I ended up migrating the virtual machine in another data store, because I could not remove old clichés about the original data store.

  Then, I realized that VM virtual disks had all be thick placed in service. While they took place when there was no real data on them.

  Finish by removing one of the vdisk and that solved the problem! Back ups are busy.

  Thanks to you all!