Right shift key does not work after update BIOS on the Satellite A200 - 28 p

Similar Questions

• T410 CTRL key does not work after update BIOS to 1.45 (German keyboard)

  Dear community,

  I updated the BIOS of my TP T410 (2522), German keyboard, to 1.45. After the update, both CTRL keys don't work anymore. Ditto for the AltGr key. When I switch to CTRL FN in the FN key BIOS - as supposed - works like the CTRL key. But when I turn off again the FN returns to his good funtion and CTRL does not work.

  When I connect an external keyboard via USB it works perfectly.

  Any suggestions how get the CTRL key works again?

  Best regards, Simon

  Hello

  turns out be a hardware fault. Swapped keyboard and it works again.

• Satellite P50-A-144 - FN + z key does not work after update Win8.1

  Hello
  a couple of months ago with windows 8, which became 8.1 with w. update, I bought PC toshiba laptop SATELLITE P50-A-144.
  Since then, fn + z key does not work, it says that light keyboard turns off whenver I press it.

  How could I solve this problem? It's my OCD tingle.

  Thanks for all the replies :D

  Strange. Something like that shouldn't happen. I updated my machine, but everything works fine.

  I don't know if this will help, but try to reinstall the driver of Toshiba system and function key utility Toshiba.

  You should find it on the download page of Toshiba - http://www.toshiba.eu/innovation/download_drivers_bios.jsp
  Check it out.

• Satellite U920T - function keys does not work after update to Win 10

  Hello, good morning / evening...

  I use (U920T satellite) and recently updated my Windows 10 Tablet
  but after that, the function keys, volume, brightness, key FN and even the backlight does not work anymore!

  I tried to restore the system and update the driver software but nothing has worked...

  I use these keyboard shortcuts all the time and now it's really hard without them!

  What is the problem? What should I do?

  The problem is that U920T satellite is not listed as Win 10 support unit and, therefore, drivers earn 10 Toshiba and software that controls the FN keys is not released.
  But as far as I know using the FN keys, system of Toshiba and the Support of Flash Card Utility driver must be installed.

  For all Toshiba units win 10 supported, the drivers can be downloaded from this page:
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

  Maybe you can try the drivers released for other models of portable Win 10 supported...
  I'm not sure if the software will be compatible with your model of U920T, but its certainly worth a try...

• Qosmio F50 - bright/Fucntion keys do not work after update BIOS buttons

  OK... I read a similar post and has FACT EXACTLY what IT SAID TO DO... He solved half of the problem or less... after the update to the new bios that I'd like speed or make my Qosmio energy gave me problem from the first day I installed it...

  The reason why I upgraded to was I thought he could solve my problem of flash memory card. They NEVER APPEAR AFTER REBOOTT... I ALWAYS HAVE RESTART THEM IN THE WINDOWS MENU... I thought that if I do a scheduled task. This would solve the problem. Guess what... It SCREWED my windows calendar place... a mistake self-protection
  This brings me to install the new bios... After you install... He has created ONE MORE PROBLEM, INTOTAL - TWO
  (1) KEYS INFORMED DON'T WORK
  (2) FLASH CARDS DO NOT WORK
  After following the instructions of a thread posted here... He told me to remove the VAP and reinstall... Guess what... it solve the key problem... but MY KEYYYYYY FUNCTION... I restored my pc... He said if your function key is disabled... GUESS WHAAT AGAIN... THE FIRST PROBLEM TO... ILLUMINATED KEYS DO NOT WORK... I later discovered that I can't have both things at the same time according to the instructions... Oh Yes... I forgot to mention;... CARD FLASH showing... shut up has never shown... restoration takes me to the original problem...

  I think down my BIOS version that might solve the problem but can't find it... I don t want to restore because I might install additional software like the game... Assassin s creed... BTW... It works AMAAAZZZINNNN... but the multimedia and function keys keep on bugging me
  I have a Qosmio F50-126 with Vista 32 bit...

  Try:

  Reset the BIOS to its default settings.
  VAP to uninstall and install the latest version from the Toshiba site.

  PS I think you can change the lighting in the BIOS, have you checked this setting?

• Shortcuts keyboard touchpad does not work after installing Wii XP on Satellite A200-1HV

  Synaptics touch after that installation of Windows XP does not work.
  http://i043.Radikal.ru/0805/C5/09a7324bc1d2.jpg

  On Vista I touch "Two arrows" touchpad lite to the top of blue color, but now it doesn't.
  I installed the driver for Win XP Toshiba web site.

  How about the hot keys on the touchpad?

  From Russia with love =)

  Can be I said isn't right, problem? I'll try to talk about my pain. In Windows Vista Home Basic, when I touch "2 arrows" (you can see it on the screen, Angel of the top-right), after that, touchpad started a blue fluorescence, and after I press 1 to 6 buttons on the touchpad (they were all in the red circle) and starts the application tha. But no, when I touch "2 arrows", nothing has changed. It's information helps solve the problem?
  P.S. I try phone support, but now in Russia, we have vacation =)

  Sincerely your JIABP.

• Safe mode - the F8 key does not work after update.

  Hello
  Key F8 used to work well before the updates, what should I do to get it back?
  I know how to use options in msconfig startup and other workarounds for SM, but all I want is key F8 works again.
  TKS.
  PS - Configuration of initial startup of PC always unchanged since the first outset.
  -I couldn't find an answer adapted on Google too.  itconcerned

  Hi Umesh,

  For better stability for Win7, please see: http://support.microsoft.com/kb/977074, please see below, thanks also to The Windows Club http://www.thewindowsclub.com/ where there is so much rich stuff like the one above.
   
  "" Issues that this update fixes
  This update improves the stability and reliability of Windows 7 and Windows Server 2008 R2 in various scenarios. This update addresses the following issues:

  • Or shortcuts keyboard function keys mute keyboard or calculator, can not work properly... » »

    Thank you for your patience.

    Best regards

    It itconcerned

• Satellite A100 - 192 (PSAA9E) FN + F8 key does not work after update driver BT

  I have just download the update of "blt-mon-20071009150856" Bluetooth driver and install the driver "BtMon2Inst_v212" on my A100 - 192 (PSAA9E). After installing the driver 'Toshiba Bluetooth 4' BT works very well.

  BUT I can't use wireless (FN + F8) key to switch between Bluetooth and the wireless device. I can disable/enable them from the control panel or the utility ConfigFree.

  No idea how to bring back the FN key?

  TNX.

  Hello

  I assume the ordinary models don t work properly.
  You must download this tool from Toshiba page and reinstall it on the XP operating system running.

  Please report if the common modules tool has solved this problem!

  Best regards

• Multitouch 511 Acer e5 does not work after update bio

  I've decided to update my BIOS on my laptop Acer E5 511 and afer that my touchpad lost the abilitiy to work on mutlitouch gestures.

  I can't scroll, zoom, or do the right-click by pressing with two fingers at the same time.

  I tried isntaling the touchpad on the official drivers, restarted my laptop a few times but nothing helped.

  If someone had the same problem and found the solution please share, I got to use for functions multitouch now I feel diseabled whenever I use the touchpad just for the cousor Thierry.

  Found the soltion targeting minutes after this announcement.

  You must go to your BIOS or UEFI py parameters pressing and holding you key F2 while the laptop is turned on.

  Here you find touchpad and select 'Advanced Mode', then simply save the changes, and after restarting the laptop the multitouch features will return.

• Compaq Presario V3118AU Internet does not work after update BIOS and Broadcom Wireless Driver!

  I posted here yesterday on my computer because I have updated the Bios program with the update of the BIOS of 2007 and after that my internet no longer works.   The advice I've gotten is update Broadcom driver wireless as well as I did yesterday but the same result.    I was told also that if all things go wrong can I downgarde my Bios program that imposible because the older version on my computer model page is actually installed now on my computer.  I have run out of idea already of what else could be done please help.    Sometimes wireless connection to connect to the router but often difficult and if I am connected I can't go to the internet and to connect to the Local network I just get limited connectivity.

  Can someone please tell me what to do to solve this problem.

  Thank you very much!

  You are welcome. Let us know how it goes.

• Touchpad does not work after update BIOS 1.08

  I have an Acer Aspire ES1-711 with 10 windows and when I updated the BIOS to 1.08 the touchpad has become upresponsive after the restart. They keyboard work suddenly quit that I wrote this, I tired to disable and re-enable the touchpad and that caused the keyboard to stop working. This computer might as well be a desktop computer now because you have to use a wireless keyboard and mouse for use... Why must Acer always have a faulty BIOS updates?

  Solved it by installing the IO series Drivers, driver Intel CITY and sideband fabric device driver.

• Audio Jack does not work after update bios

  I'm not able to use my my helmet after I've updated my BIOS and driver audio audio codec IDT high definition.

  I have a probook 4440 with windows 7 (64 bit) OS. Help about my problem?

  Hello:

  The only suggestion I can offer is to perform a hard reset of the laptop.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=376999&prodTypeId=321957&prodSeriesId=376999&ObjectID=c01684768

  Paul

• ENVY 15 t-ae000: (F2 and F3) brightness control keys do not work after update bios and Windows 10 update

  After that I upgraded to the latest version of the BIOS and upgraded to Windows 10, brightness controls no londer work.

  Would appreciate any help.  Thank you

  Hello

  If your laptop uses Nvidia Optimus (Intel + Nvidia GPU), try to download and reinstall the Intel HD graphics driver on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp74501-75000/sp74569.exe

  When reinstalling, restart the laptop.

  Kind regards

  DP - K

• right shift key does not

  HP ENVY 15 t-j100 Select Edition CTO Notebook PC (ENERGY STAR)

  my right shift key does not work

  my laptop is new, it just

  the shift to the right have shift and break, perhaps that is the reason?

  Hi Ahmad89,

  Thank you for visiting the Forums HP's Support and welcome. Please contact our technical support at the 800-474-6836. If you call in North America, the number is 1-800-474-6836 and for all other regions click here.
  They will help you with the keyboard problems.

  Thank you.

• 11-n001tu x 360 PC Pavilion: 11-n001tu x 360 HP Pavilion touchscreen does not work after updating drivers

  Touch screen of my laptop does not work after update my drivers to date. I opened Tablet PC setting, he said: "there is no pen or touch input available for this view. (I used the shortcut to open the parameter because the Tablet PC set disappeared into the control panel as well as the features of the touch screen). I tried to make a recovery, but it has failed to bring to the touch.

  In addition, the HID-Compliant touch screen driver is missing.

  Please help me solve this problem, thank you.

  Hi there @BryanHech,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that your touch screen has stopped working after update the drivers on your laptop PC HP Pavilion 11 - n001tu x 360 .

  How you did update the drivers?

  You use Windows Update?

  Have you checked to see if the driver has been disabled?

  Have you tried to run the Troubleshooter in Windows?

  Have you tried to do a hard reset?

  Have you tried a update the BIOS and graphics driver?

  Have you tried to perform a screen touch diagnosis the HP Hardware Diagnostic tests?

  Have you tried to Configure the display key?

  Have you tried to activate the driver in touch screen device manager?

  Please follow these steps to see if you can activate the touch screen:

  • Open the Device Manager
  • Find "Human Interface Devices"
  • Expand "Human Interface Devices"
  • Right-click on "touch screen HD compliant."
  • Click 'Activate' (if available)
  • Restart your laptop.

  If losing your touch screen happened after you had made a set of Windows updates, use the system restore feature and choose a date that was before the problems began.

  To use the system restore in Windows:

  • Go to the Search
  • Type of Control Panel
  • Click on Control Panel
  • Click System
  • Click on the System Protection
  • Click the System Protection tab
  • Click on System Restore
  • Click Next
  • Choose a restore point
  • Click Next
  • A box that says "once started, the system restore cannot be interrupted. Do you want to continue? ' displays
  • Click Yes to confirm

  When the system restore is complete, you'll be up a pop that says that it has been completed.

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

  Thank you!