I need a version 3.0 - ish of Firefox which is used on a registration site the webmaster has not upgraded and debugged the site to be compatible with Firefox 4.

Similar Questions

• Is it possible to access a version of the Adobe Reader application compatible with iOS5.1.1?

  We use iPads to access the PDF prints in a manufacturing environment. We cannot now access a version of the application that is compatible with ourhardware. Is there an access point for legacy applications?

  Hello

  Yes!  The App Store can provide the latest compatible Adobe Reader for your iPad running iOS 5.1.1.

  Please take a look at the following forum post for the dialog box with the message "download an older version of this app?

  Re: The reader on the iPad 1

  I just tried it with my first Genesis iPad running iOS 5.1.1 and confirmed that Adobe Reader for iOS version 11.0.1 has been correctly downloaded and installed on my iPad.

  Please let us know if you need more assistance.  Thank you.

• How can I get the icon of a padlock on the bar at the bottom Add on? Since Firefox 4.0.1 Download this icon has not appeared and I need to check safety via the Tools menu.

  Now, I need to access information through the Tools tab page to make sure that the pages are safe to enter sensitive information.

  Sorry, had to use tools. In fact, the idea was that you would use the box to the left of the address (green, blue or plain) to check if the site is secure.

  The site identity button | How | Firefox help

  I read about an add-on that you can use if you prefer to see a lock:

  Firefox 4 where is the lower right corner of padlock | Firefox Support Forum | Firefox help

• Which version of the runtime DAQmx is compatible with DAQmx 8.8?

  I'm going to build an installer using Visual C++ and I wanted to include the DAQmx run-time, rather than the complete installation.  I built the application using DAQmx 8.8 but, I do not see a time of execution of this version.  I see that time for 8.9 and 8.7.1.  Time of execution is compatible with 8.8?

  Thank you

  Hey,.

  I just very well with the 8.9 DAQmx run-time. Here is the link to download.

  Thank you

  nAyer

• I thought that I turned in a document but it has not submitted and I removed it not knowing and I need to resubmit.

  I deleted a document that I had previously saved in word. I found it when I went to start and looked for the document, but now it's a shortcut and I can't open it because it says it will not work properly because I had renamed before. How can I get my paper to the way it was when I removed it? I really need this back.

  Hello

  Windows key + F - on click Advanced find on the right the down arrow " v ".
  Fixed location to the COMPUTER date you can so it limits the search
  (time of the last known good file available). Look for-> them the filename *. * that
  need to find all possible files with that name - could be a .bak or so away. If
  something looks good and you must rename it then do NOT attempt to use the
  filename.ext even as it was exactly (use the extension that you need but change
  the file name by adding a 2 or so away, so it is not inconsistent with any other
  copy).

  If necessary check box of the items not indexed search.

  The * is a wildcard, which means EVERYTHING.

  I hope this helps.

• I need a new computer for my flight training, which I use Micrsoft flight simulators, the most ancient and new.

  I learned that my current Microsoft flight simulators will not work. The oldest use Windows 98, and then Windows 7 and the FSX is on Windows XP. My old computer wouldn't half of them as I didn't have enough to run. I find that the new computers will not run these Sims. What am I looking for, wise computer which runs to them because that's all that I need the computer as well as the series Combat Flight Simulator. I'm looking at HP and Dell. But you need to know if they are compatible with the games. Thanks, Jerod

  Most new PC with a CPU series i will work, even with the embedded video. However, a discrete video card will help a lot with FSX, especially if you use an add ons or landscapes updates (which can make a much better Flight Simulator!).

  For Combat Flight Simulator, you may need to run in compatibility mode so that it can work.

• I installed the full version LavVIEW 8.6. I tried to upgrade to the professional version 8.6 by simply installing the new discs, and it has not upgraded. What do I need to uninstall, or is there a trick?

  I installed the full version LavVIEW 8.6.  I tried to upgrade to the professional version 8.6 by simply installing the new disks, and it didn't perform the upgrade.  First, I have to uninstall and reinstall, or is there a trick?

  Look in the License Manager in the National Instruments of your Start menu folder.  This is probably just a matter of activating LabVIEW 8.6 and maybe some other features with your new code license rather than your previous full version license code.

• Get the error message saying that I need a version update of iTunes to synchronize my phone.   But I am running the latest version of iTunes?

  I use the beta 7 for iOS 9.3 and I get this error message when I plug my 6Plus up to iTunes.  Another of my friends runs the same iOS on his phone and does not have this problem.  Ideas, I try to avoid uninstalling and reinstalling if possible so I wouldn't to sync all my music from my computer windows again.

  Problems with beta releases should try contacts provided during your registration or beta, not public forums.

• Media Center 2005 crashed I loaded Windows XP sp2. Installing XP cannot load explorer.exe and another dll file... Need help or information on how to request recovery of microsoft disk MC2005... Gateway has not.

  Help please... I have a gateway gt4024 designed with Media Center 2005. Recently, the system was not "acting accordingly so I tried to reload the OS." I realized that I didn't have the recovery disc, then I decided to load XP Professional I had on it. The law on the computer is as it has been installed correctly and then I get a message saying explorer.exe could not be loaded properly or the drive perhaps is corupted and the same message to another .dll file. Once completed, I can reboot and use the computer, but then the windows installer will not work and the drivers are still present on the hard drive. Now, I loaded the new operating system before and I know that pilots are not supposed to be always present on the system. I then put a new hardrive has had the same problem. So, I then took the hardrive and placed in another computer that was be a dell and load xp fine without error. Can someone point me in the right direction. I contacted gateway to another Media Center recoverydisk, but they said because the computer was no longer under warranty, that they did not have the specified disc and to contact Microsoft. A link would be useful.

  BizzyBidnez,
  Thanks for posting on the Microsoft answers Forum.  Here is a link to the replacement of media information: http://support.microsoft.com/kb/326246
  However, since the entrance to the bridge of your system, the product key may not work with a replacement non - OEM drive.  I'm surprised that the bridge was not able to provide a replacement drive.

  I hope this helps. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Comcast tells me this: we have detected that your computer needs a version update of Adobe Flash Player to properly view this video.

  Comcast tells me this:

  We have detected that your computer needs a version update of Adobe Flash Player to properly view this video.

  The minimum required is version of Flash for this video 15.0.0.152. Your current version is 11.8.800.133.

  But Adobe told me that, when I click on the link:

  Flash Player is built into Internet Explorer in Windows 8.

  You don't need to install Flash Player.

  Ive done all other troubleshooting on your page. What the hell I do so I can watch the game of Thrones?

  Hello

  On Windows 8, Flash Player is updated by Microsoft through its windows update. Kindly update your windows to get the latest version of flash player for your browser Internet Explorer.

  Varun-

• My version of e250v2 3.01.16F make it compatible with the 4 gb SD card.

  Hi, I bought this unit: Sansa e250v2 version 3.01.16F

  and I bought this 4 GB SD card. Unfortunately, the PC and the drive didn't display that I have 2 GB of space outside. My dealer told me to update with the firmware update. And I did, he updated successfully. Yet, he has not changed and it will give only 2 GB of space.

  What should I do?

  Thank you.

  Yes, aparrently is not the player or the computer problem.

  The seller has gotten a bunch of bad SD 4 GB chips. We tried another type and it worked as if by magic.

  Thank you.

• Need help to stop my Zoom to change when you use the integrated mouse

  I would like to know if anyone has a solution to my zoom change randomly when I use the built-in mouse. Is it possible to block the zoom so it does not change.

  Control the Touchpad settings in Control Panel.  My ASUS Netbook has a 'two fingers' feature that performs the zoom in things like IE and Word and it's pretty easy to operate inadvertently (another feature is two-finger scrolling, which I use frequently).  If your touchpad driver has such a feature, you may need off "awareness", it or turn it off.  Most modern/current notebook computer touchpad drivers have these characteristics, and many are turned on in different, often easy to do unintentionally, average.

  HAL
  --
  HAL Hostetler, TCE
  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
  www.kvoa.com - KVOA television, Tucson, AZ.
  Live Hot Licks - www.badnewsbluesband.com

• Need a (free) compatible with Windows 7 driver for Lexmark Z13

  Need a (free) compatible with Windows 7 driver for Lexmark Z13

  Hi nikua,

  According to the Windows 7 Compatibility Center https://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=Lexmark%20Z13%20Inkjet%20Printer&v=Lexmark&uid=16000&pf=3&pi=0&c=Printers%20%26%20Scanners&sc=Ink-Jet%20Printers&os=32-bit the Lexmark Z13 is 'compatible' with Windows 7 therefore the default drivers should be sufficient.

  Of course this model is no longer available for Lexmark won't provide drivers for Windows 7. If you can't get your printer to work then maybe it's time to think about buying a new. John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ;

• How to make the old brushes compatible with my current version of Photoshop

  Hello I'm new here, I've looked everywhere for a solution to my problem with no luck, so I ask for help. My problem is that I downloaded free brushes for Photoshop when I tried to use appears an error message saying these brushes are not compatible with my version of Photoshop. I wonder if there is a way for me to convert them or that they are compatible with my version of Photoshop? I use Adobe Photoshop Version: 2015.1.2 20160113.r.355 2016/01 / 13:23:59:59 CL 1059143 x 64

  I would be very grateful for any help that I can thank you.

  All the old brushes are compatible with versions of Photoshop.

  My guess is that you have a corrupted file downloaded, or have the wrong position on the file.

• My iPhone-ish syncs with macbook pro when it comes to iTunes. Message reads "iPhone need latest version of iTunes. I can't understand how to upgrade iTunes on the iPhone, unless it comes to update the operating system. I guess I have the latest OS, 9.3

  My iPhone-ish syncs with macbook pro when it comes to iTunes. Message reads "iPhone need latest version of iTunes. I can't understand how to upgrade iTunes on the iPhone, unless it comes to update the operating system. I guess I have the latest OS, 9.3.2 on my iPhone. Any help for this problem?

  • Sync with iTunes on a Mac or a PC requires:

    • Mac OS X v10.8.5 or later
    • PC: Windows 7 or later
    • iTunes 12.3 or later (free download from www.itunes.com/download)

  iTunes too old and too old osx to support necessary to have iTunes, you will need to update osx to update iTunes to work