I need some advice for the Satellite L630/03

Similar Questions

• Need some drivers for my Satellite A210-10 WXP has (PSAEL)

  Help me please!

  I need drivers XP modem, video and audio for my laptop (Satellite A210-10 a (PSAEL))
  I found the download links for the video card, but I can't download driver! It is not available!

  I need this driver, because my work with WinXP, but I can not install all the drivers correctly.

  The fact is that XP can be installed on the A210 and XP will run.
  On the European driver Toshiba page, you will find some common XP drivers, but not all.
  If you miss some XP drivers graphic driver, audio driver, etc. use the XP drivers from the manufacturer of the chip or the Satellite series others which have been equipped with the same features and as A210!

  PS:
  Have you seen this thread?
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26818

  It s interesting and useful

• Need driver Nvidia for the Satellite A200 - 14 d

  I can't find drivers for Nvidia Geforce Go 7300 that supports my Satellite A200 - 14 d

  Model name: Satellite A200 - 14 d
  Model no. PSAECE - 004006g 3

  Help, please

  PS: I need the bluetooth drivers too

  Hey Buddy,

  where you are looking for? I can give you some links and you can search for all the sites for the drivers you need:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
  Toshiba Europe
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp
  ToshibaUSA download
  http://209.167.114.38/support/download/ln_byModel.asp
  Toshiba of Canada limited - drivers and downloads

  And ESPECIALLY for the drivers from nvidia, you can watch here:

  http://www.OmegaDrivers.NET/
  OmegaDrivers.net - home of the Omega Drivers for desktop/laptop ATI & NVIDIA cards. Very good site!

  Hope it will bring you further.

  Welcome them

• Need some advice on the best way to do specialized source distribution

  I need to give a customer a labview block, they can use our material in their own labview code that will read the (encrypted) data net senor off the coast and the flow of data in a form usable output.  I built a vi that can be used in a loop, a bit similar to the block of canned labview data acquisition that can be used to acquire data from products OR.

  There are many sophisticated (and secret) algorithms going on in the background which make sense data and translate them into a usable data table, but also configure the hardware itself. Accordingly the only final vi I prepared to distribute the client makes use of Subvi about 20. Almost none of these subvis could be ideally be reconverted in plain code in main vi, nor what I want to do this.

  The rules of the game is the following: I want to give him the block I created to use its own code, without him to see what's happening inside the vi.  I can deny him access to the block diagram/s, no problem, but I don't want to give him access to the subvis, to use, or even to know their names - preference they would be hidden or otherwise pre-compiled. Preferably I would just give him the main block only, perhaps with some support files that would be entirely opaque to him.

  Looking for advice on the best way to go. There is an elegant solution to this problem? For example, it would be better to compile the block as a .dll file, and then write a wrapper vi any?

  Have you thought of creating a packed library? You can also password protect your code. You can delete the distributed code block diagrams. You can use a combination of the above as well.

• Need some information on the Satellite A100-474 screen refresh rate

  Hello.
  Good time of day.

  I try install asp linux on my laptop. To configure X Windows I have to configure horizontal and vertical refresh of the screen (Toshiba TruBrite WXGA TFT).
  Any ideas how I can find these values?

  With respect and graditude, Raven.

  Hello

  Unfortunately, I found that the information the Satellite A100-474, which belongs to the PSAA9E series has been delivered with the 15.4 screen "and max. 1280 x 800 WXGA resolution.
  As far as I know it is developed by Samsung and it is a part number: LTN154X3-L06-H0A.

  Did you look in the user manual? I think that the manual provides some useful information under Schedule A; Technical characteristics.
  It should be for information about the video modes as the resolution of the CRT screen, color depth (bpp), and refresh rate (hz).

• Need some drivers for my Satellite C70D-B-10U

  Hello

  I see that not all the site provide download drivers. In the management of devices, I have yet 2 missing drivers
  PCI peripheral controller and unknown encryption/decryption.

  Can someone help me with it?
  Thank you

  All the drivers for the series of satellites C70D-B-10U (PSCLEE) can be found here:
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp?service=EU

• Need some advice on the new computer from HP.

  I bought a new HP computer and it shipped just yesterday and delivery date is Thursday (12th).  I am new to HP computers, my other 2 desktops are Dell and Toshiba laptop of my wife. Laptop is Win 7 and desktop computers are Win XP. The most recent Win XP is:

  Windows XP Professional SP3 32-bit
  Intel Core 2 CPU 6300 @ 1.86GHz
  4 GB of Ram.

  Don't laugh, my other Dell XP desktop computer is simple core!  Laughing out loud

  These 2 computers will retire after I receive and configure the HP computer:

  HP Pavilion HPE h8 desktop PC - 1360t
  Windows 7 Home Premium 64
  3rd generation Intel Core i7-3770 to processor quad-core [3.4 GHz, 8 MB of shared cache]
  10GB DDR3 1333 MHz SDRAM [3 DIMMS]
  SATA 1 TB hard drive 7200 RPM.

  Do you think I'll note and difference? (I'm kidding) Laughing out loud

  1. is there a procedure for the implementation of the new computer? I'll be the only one to use it.

  2. I also want to do a recovery disk. Can I do this after having my computer account?

  3. the computer come with Service Pack 1 installed?

  HP Pavilion HPE h8 desktop PC - 1360t
  Win 7 x 64 ~ ~ SP1, IE11 ~ ~ FF i7 3770 3.40 GHz ~ 10 GB Ram ~ NIS 2014

  Congratulations for the excellent choice.

  1. is there a procedure for the implementation of the new computer? I'll be the only one to use it.

  With your experience, you probably won't have a problem. I strongly support you haven't set a password on it.

  You can always add a password later.

  2. I also want to do a recovery disk. Can I do this after having my computer account?

  Configuration of the computer and do what is required to complete the user account. It is advisable to only use DVD + R media. You will probably need 3-4 DVD + R and the usual CD - R disc repair system.

  3. the computer come with Service Pack 1 installed? This date should be. There will be updates.

• Need some drivers for my Satellite A100 WXP

  Hello

  because the virus had to reinstall windows XP. found most of the readers on the site disappeared.

  However still not get wlan and lan to work. still not working shows in Device Manager: * Ethernet controller, mass storage controller, SM Bus controller.*, network controller

  I'm not more skilled with the PC, so in the hope of a few simple instructions: P

  I found the drivers LAN from here: [http://uk.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=UK | http://uk.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=UK] but if I redirect disk update file are preserved, does not recognize the above controllers (maybe they are not related to the LAN?)

  I just want to make it for the internet still works once it's my wifes laptop and after almost two weeks trying without success is not happier.

  Any help is appreciated.

  At has first of all tell us please what A100 you exactly (A100-xxx).

• Need some advice for storage of laboratory work station.

  Hello community,

  I was student and new to ESXi. I would like to build a cluster VM storage initially for HA and FT, but my SSD is maximum and would like to make my external storage using my other PC small box. No I have no room for another player.

  This is my configuration of lab.

  .

  A DS81 shuttle that has my Workstation11 Server 2008 running for the DNS, AD and two ESXI 6.0. on the third host, I would install vCenter 6.0 as one. EGGS only because its been hell Server installation.

  Second Shuttle DS81 (do not use) with the same characteristics. They all have two 100 SSD with 16 GB GB memory with 2 NICs with opassive not to switch between the two and using bridge vmNet0.

  What is your recommendation on the creation of storage using the extra white box? or I also a 16 GB in PC SD card I would use it as a storage device. Can I do it using my computer?

  Thanks in advance guys.

  Hello

  The extra PC for use as additional storage space will work fine.

  You can do this through software like freeNAS or just install linux and set up an NFS share.

  I do not recommend the use of the SD card which do not work very well, these cards are all way too slow.

  Even the fastest have too much latency and will drive you up a wall.

  An SD card allows you to start an operating system like vSphere, but you don't want to host VMs on them.

  --

  Wil

• Satellite A200-1AH - need some advice for hard drive replacement

  Nice day

  I've been using a + A200-1AH + for three years. Unfortunately, I suffer from problem of free disk space. So, I decided to replace my drive with a new one.

  How can I know the HDD I buy will be suitable for my laptop?

  Can you please tell me what era the + key-points + I need to know when buying a new hard drive for my laptop?

  Post edited by: alicozgo

  I changed the subject, because it was so dumb. Why would I ask 'what hard drive buy' in a Toshiba forum :) what a forum administration...

  Hello

  Satellite A200 is a more recent series of laptops. This series of laptop use and support the SATA HDD controller and this means that you need a SATA HDD!

  The laptop runs the 2.5 hard drives. The speed of the HARD drive is not very important for compatibility so that you can choose 4200 RPM or other

  In addition the SATA controller has no limitation in size so THEORETICALLY, you should be able to use hard drives with 320 GB or more
  But in some cases rare BIOS would not be able to manage some HARD drive sizes, but this generally isn't the case

• Need some drivers for my Satellite A100

  Dear all,

  Could someone help me?

  I bought my laptop (Satellite A100, PSAA9) with XP 2007 April.
  Yet I have installed the Microsoft Windows Vista Ultimate 32-bit OS (with SP1)

  Vista has found a lot of drivers for my laptop, but someone is missing.
  For example: virtual sound driver.

  I found only for XP.
  I've not found for Vista.

  Could someone give me a good link where can I find working drivers for Vista?

  Thank you!

  Gergely Fehr
  Hungary

  What you mean with the drivers work? Nave that you have installed drivers 'non-functional '? Which one?

  The fact is that the list of tools and utilities for Windows XP Home and Vista edition are not the same because some of them no longer exist. That's all.

  All WORKS WELL drivers, tools and utilities that you can find on Toshiba page under http://eu.computers.toshiba-europe.com for assistance

• Need some drivers for my Satellite C660

  Hello

  I tried these last days download drivers sound card for my laptop and the display. I filtered to find the most appropriate for my laptop, downloaded, extracts, he wonder then confirm that I am happy for changes at this time, nothing happens. I tried with several different downloads and none of them seem to be installing.

  Can anyone help?

  I don't know who don't C660 you exactly and what operating system you use, but all the drivers, tools and utilities for your model mobile, you can find on the download page of Toshiba - http://www.toshiba.eu/innovation/download_drivers_bios.jsp

  Just choose your model of laptop, operating system, and you'll find all the.
  By the way: is there a problem with your machine or you simply want to update some drivers?

• Need to display for the Satellite L755-M1KT driver

  I have a laptop Toshiba Satellite L755-M1KT. I've recently installed a new windows. So I had to install all the drivers but I couldn t find display driver.

  One that I found in the s Toshiba site is broken file!
  Any help would be appreciated

  Hello

  According to specification for laptop, your laptop came with Windows 7 Home Premium 64 - bit pre-installed. When you install this recovery to original image (Windows version) all drivers are included.

  Question is: what version of Windows you have now? Win7 64 bit again?

• Need some drivers for my Satellite L755 - 16Q (PSK2YE)

  Could you tell me please, where can I find drivers, I need this laptop?

  SM controller
  PCI\VEN_8086 & DEV_1C22 & SUBSYS_FC501179 & REV_04

  USB controller
  PCI\VEN_1033 & DEV_0194 & SUBSYS_FC501179 & REV_04

  Unknown device
  ACPI\TOS6205

  Network controller
  PCI\VEN_168C & DEV_002B & SUBSYS_661311AD & REV_01

  This laptop was conducted in Germany, but I can't install the drivers of the German section of the site.

  Drivers for all supported operating systems, you can download it from http://www.toshiba.eu/innovation/download_drivers_bios.jsp

  What operating system do you use?

• I want to convert my logic large table - multiply in a library called the faster, need some advice on the code of C.

  Hello everyone,

  In my VI, I have a code that looks like this-

  

  Each table is 2D size 512 by 640.  The time it takes to run this whole chain is approximately 28miliseconds. Seems fast, but I need to cut it to about 10ms.  I tried to make the tables 1 d, but saves only about 2 ms.  I even tried to cut the table 1 d in half and duplicate the code and then combine them at the end (a half-hearted attempt at optimizing multi-core) and who showed zero improvement...

  I guess my last option (please let me know if there are other options) is to compile a DLL that will do this for me.

  I'm a bit confused on how I'm supposed to implement table multiplies in C, however.

  What I do run for(;;) a loop and multiply each item one by one?  It seems that that would be much slower than anything done LabView in-house to do this multiplication of cross-checking.

  Thank you!!

  MK

  If you don't know how you would in C, I don't know why you think that move it to a DLL will make it faster. In C, you will need to either make operations sequentially in a loop for, as you mentioned, or find a library for parallelization of this operation. There is no built-in c function to multiply the tables.

  One thing you might try in your LabVIEW code is to multiply it in a loop for, where you make an addition to each iteration and store the result in a shift register. Also remember the current power of the original array into a shift register. Which should reduce the number of copies of the table you need, which can speed up to turn the code. So, you initialize it the 'sum' with the first table shift register and the shift register current electric table with the result of the subtraction (or, Alternatively, with a table of the same size, filled with 1, according to the order in which you want to do things). Multiply this table by the first multiplier, add it to the sum, and multiply the power of the original (subtraction) table, storing to the power shift register. Repeat until you are finished.