Need some advice for storage of laboratory work station.

Similar Questions

• Satellite A200-1AH - need some advice for hard drive replacement

  Nice day

  I've been using a + A200-1AH + for three years. Unfortunately, I suffer from problem of free disk space. So, I decided to replace my drive with a new one.

  How can I know the HDD I buy will be suitable for my laptop?

  Can you please tell me what era the + key-points + I need to know when buying a new hard drive for my laptop?

  Post edited by: alicozgo

  I changed the subject, because it was so dumb. Why would I ask 'what hard drive buy' in a Toshiba forum :) what a forum administration...

  Hello

  Satellite A200 is a more recent series of laptops. This series of laptop use and support the SATA HDD controller and this means that you need a SATA HDD!

  The laptop runs the 2.5 hard drives. The speed of the HARD drive is not very important for compatibility so that you can choose 4200 RPM or other

  In addition the SATA controller has no limitation in size so THEORETICALLY, you should be able to use hard drives with 320 GB or more
  But in some cases rare BIOS would not be able to manage some HARD drive sizes, but this generally isn't the case

• I need some advice for the Satellite L630/03

  Hi all

  I just bought my first Toshiba L630/037 (http://www.mytoshiba.com.au/products/notebooks/satellite/l630/psk04a-037001/specifications#details) and I'm really excited that I'm waiting to load for hours first 2 or if, after perform you a unboxing conversion it!
  He looks bloody awesome and I can't wait to start using it!

  You have a few questions:
  1. when I received it, the sticker that keeps the top down was already torn (as in a person already open).
  The clerk said that everything is fine with it, so we opened it to check that the main seal for the laptop has not been broken and that the adapter and cable was there. Now that I'm home and I have everything out, I noticed that I have no CD.
  Is that suppose to be right? I'm a bit confused because the last laptop that I bought a few of the installation CD and the drivers that came with it. In addition, is there something else I should be aware of that should have been in the box?
  All I have is the power cord, power adapter, manual, portable with battery already in it.

  2. in the purchase, there are already standard warranty 1 year that comes with the laptop. I noticed on the Toshiba site, you can buy an extended warranty. Should I buy now? Or can I get, say 1 week before the end of year 1?

  If anyone has useful tips or advice that would be greatly appreciated!

  See you soon!

  > I took everything out, I noticed that I have no CD.
  Yes, that's right. No CD is delivered pre-installed Toshiba Software is on the HARD drive and you can create a clean recovery disk! Please see the operating manual!

  > Should I buy now? Or can I get, say 1 week before the end of year 1?
  Well, as far as I know you don t need to buy the extended warranty immediately after the laptop was purchased

  I found this info:
  > Q: When can I buy the extended warranty?
  > A: the extended warranty is eligible to purchase, during the period of warranty the laptop
  http://www.MyToshiba.com.au/support/warranty/extended/FAQ

• Need some advice for my little shoot in A.S. 2.0 script

  Dear wizzards Flash,
  After spending many hours on this script, because I'm not a wizzard (again :) I almost give up.)
  
  I created 3 objects.
  The target (you can move it up and down)
  The shooter (I flip that onEnterFrame in degrees of right to achieve the target);
  The balls (bullets) that hit the target in the middle.
  
  As you can see it almost works:
  my example
  
  The problems I have is:
  When you drag the target from top to down fast... the balls also go up and down and
  do not follow the path in a linear way.
  Whe the degree is zero... the ball speed is too fast... the speed of the ball must be constant.
  
  Now I have a lot of mathematical drawings on my paper and use my calculator a lot, but maybe
  someone has already done this before and would like to share the access to its source code. At least I have tried myself :)
  
  My source code is:
  
  
  
  
  
  

  1. the starting point depends on your point of alignment. your hoek reg TP must be where you want to ball start.

  2. who should be:

  MC = balA [i];
  balA.splice (i, 1);
  mc.removeMovieClip ();

• Need some clarification for upgrade

  Experts in the morning,

  I need some references for the process to upgrade between 10 and 11 g.

  I always use DBUA to update our database.

  
  

  For most administrators recommend NOT following options. I am confused.

  Experts, please guide me to travel in the right direction.
  

  > > Is this really necessary until the upgrade process, which is the real benefit?

  SQL > exec DBMS_STATS. GATHER_DICTIONARY_STATS;

  
  

  > > To activate my database in NOARCHIVELOG MODE, it provides massive difference during the upgrade process?

  SQL > alter the noarchive base newspaper;

  
  

  > > TRUNCATE table audit SYS. AUD$

  SQL > truncate table SYS. Storage of AUD$ drop;

  
  

  > > Depends on length process,.

  Size of the database

  Number of synonyms

  Number of data files

  Size of the recovery logs

  Number of installed components

  For the types of data and not the XDB user objects.

  > > Deletion of FILES NETWORK completely from 10 g $ORACLE_HOME, creating newfiles in 11 g $ORACLE_HOME

  
  

  $ rm - rf tnsnames.ora

  $ rm - rf listener.ora

  
  

  Thanks in advance.

  Hello

  > Is this really necessary until the upgrade process, which is the real benefit?

  SQL > exec DBMS_STATS. GATHER_DICTIONARY_STATS;

  1 prior to advantage, was causing problem - degrade the performance of your database? What its not beneficial?

  Logically, if you see the dictionary is on your information about your database - default provided with products and items of custom applications. Now during the upgrade - given that the term refers to a new addition of things monofores or gout or new table segmetns is getting added to your existing dictionary. Now, if I don't keep his stats up to date on my dictionary itself then update itself is the process of taking time. It will hit my sqls himself upgrade performance

  Thus, in order to reduce this impact - prior to your downtime in pre-upgrade task you can collect stats on your dictionary. While during upgrade if you run / run research in its stats its would take very little time to collect minor statistics and it will not affect the order of execution of ddl or dml SQL out that focus on changes in your dictionary.

  > To activate my database in NOARCHIVELOG MODE, it provides massive difference during the upgrade process?

  SQL > alter the noarchive base newspaper;

  2. I don't know who s/n, suggested the above step to achieve. Not a good, better I would have fired the DBA immediately. Despite that I have perform the update level or no, keep you the database in log mode archive.

  To upgrade, its gives no performance improvement for your upgrade process. What is your intention on the upgrade?

  You want to run through the upgrade in 15 minutes? Listen you dictionary database or application objects develop the direcrtly would increase the upgrade. Is not all synonyms - maybe a few times - up to what the table - dictionary of data updated in upgrade tis - for example bitand 12 c on synonyms function table is changed, so his punches performance - it is not a must and was cause depends on the base of the environment for the environment. Reason for this how you store your environment that will reduce the burden of upgrading

  > TRUNCATE table audit SYS. AUD$

  3. I hope I answered this question is another thread

  > Length upgrade depends on.

  Size of the database

  Number of synonyms

  Number of data files

  Size of the recovery logs

  Number of installed components

  For the types of data and not the XDB user objects.

  It is partially dependent on the data dictionary and how clean it is, whatever. Clean - number sense of invalids and statistics.

  Number of components installed in a concern - it might be a minimum until we reached and deliver the bad SQL with performance.

  Size of database and data file and restore logs is out of reach... If my database is to have 10 k datafles, my upgrade script will go and touch all the header files of data blocks, is indicated in MOS linsks or docs. No, he will not be at level of offers to work on something of dictionary and Oracle database metadata.

  > Deleting FILES of network completely from 10 g $ORACLE_HOME, creating newfiles in 11 g $ORACLE_HOME

  You have any load 2 mins to copy files during upgrade spending. Fact the DBA is so busy that he can afford 2 mins tasks.

  It is out of reach, you have to manage.

  -Pavan Kumar N

• Need some advice on a motion graphics/editing PC build.

  Here's the deal. I was builing custom PC of for more than 20 years, but not a system anything close to that I intend to build then and need expert advice and information about a person to her. I'm looking to build a system designed for video editing, creating motion graphics and 3D modeling, and some argue more questions about which components would be best for my needs (mainly on the graphics card and hard drives).

  
  

  The first is the card video (s). And I say 'maps' because I don't know if I need more a card for what I am trying to accomplish. I have create many long 3D animations and complex using Blender and After Effects, in addition to changing a variety of projects in creation and you want the best bang for my money. My budget for this system is quite high ($5 k and 10 k $) and I know I can get amazing at this price performance if I get the right equipment. Thus, on the cards. From what I have gathered, briefly, Google search, is that I want a card with CUDA Nvidia for video editing. My main question in this area is, would be to dual graphic cards or using SLI quad be good in what I'm doing or is SLI mainly intended for improved game performance? From what I understand, I think that (at least the video, not sure about 3D animation) is done mainly using the CPU and GPU not; Although the help of CUDA. Basically, I need to know how useful it is. If I bought two or four GTX 980 see a significant improvement in After Effects, Blender or creation? I plan to get one of the top (if not the top) i7 CPU I can find, so it won't be a bottleneck of my CPU performance, so please does anyone suggest to put the money into the CPU rather than the GPU because I already put the maximum amount here.

  
  

  My other main question is regarding hard disks (or solid state). I'm doing a bit of editing and modeling 3D on a laptop and it's getting really well for projects bit, that I have worked so far, but as I started to work on projects that have strict deadlines, I'll need a system that can make it basically as fast as possible. My main question in this area is, should I use any sort of RAID array. I looked at several forums, but none of them specifically answered the question for my unique situation. Most other forums says ' well, if you will only use it for editing and not animation "etc but I'm going to do a 3D animation as well, so I need to know what the answer is in this case instead... I also know that the other messages regarding the change of systems, to recommend the use as three discs for things like "scratch disks". I have a feeling that I'll get a few recommendations here saying I need like seven discs for what I'm trying to make, which are the answers that I really can't wait to hear about. I mainly looked at RAID 5, 6, & 10 but do not fully understand them, and have in fact never implemented in any system I've built so far. From what little I understand, I think that RAID 10 would work better for my needs, which offers a great read & write speeds which is important and also provides redundancy, which IMO is even more important. I can't have the system down for an hour, or worse a week because one of my drives breaks down. My other question in this area is a table of the SSD would greatly improve performance in a RAID 10 array? Would it be profitable? I read in a post recently that drives hard actually handle more large files better than SSDs and worried to SSD in the test bench because they would not be able to handle larger video files and I'll use it frequently as well as hard drives would be. I guess I'll be shooting and editing many 4K projects soon and need a system that will handle this resolution well. If I have to use 4 hard drives in an array of RAID 10 for my OS (the RAID for speed and redundancy), drive a small SSD for a scratch disk and a large SSD or HARD drive for a player video output, please list the exact readers/configuration that you would suggest that I use and why. I am very interested in a bit of a discussion here to get the best possible configuration for the money and will respond to all sincere responses as quickly as possible.
  

  I know I already asked several complicated issues here but am hoping someone with a little more experience that I have in building editing systems can provide some advanced tips and help me and someone else who can try to build a similar system in the future. I know also that this issue is not specifically intended for the AE, but it has to do with this and because EI is editor and motion graphic, I'm find the best advice for a system that will edit video and create animations. Thank you 1 million (in advance) to anyone who provides a contribution instructed in answer to the questions that I have!
  

  simply 2xssd raid 1 (mirror) for the OS/applications.

  1 ssd for zero/previews

  second raid 6 or 10 with the hdd or ssd for the media.   (if you don't get a lot of drives to get the speed, you will want to use ssd.)

  No raid for backups. can use several disks hard, but in combination with off-site, such as cloud backup.

  Optional could be another ssd for cache/export. If the ssd scratch fails, it would be able to support.

  can take a look at the guides of storage here for more information.  Tweakers Page

• RV180 need some advice/Suggestion regarding the rules of access and Services

  Hi, I expected to get some advice or suggestion with a RV180 question.  I have a cable modem connection that connects to my port WAN RV180 and we have a single static IP address on the WAN port and everything works great.  We have an internal Exchange Server, so we have a few inbound rules access allowing for ports 443 and 25.  It all works.

  This is the question that I encounter.  We have now another service internal now needs outside inside access on port 443 (https), but I already have this configuration on the router for Exchange and when I have both sense, of course, it won't work correctly because the router just takes the first rules of access and use the one that works very well for traffic Exchange , but not my other service.

  Is there another way to get this job where I can have two internal services on port 443 and the router can forward traffic appropriate to each of them since my first IP? (it doesn't really matter if I had two IP addresses because it always hits the same access list for internal services)

  All advice or suggestion would be great

  Hi, yours is a general networking, not specific to RV180 problem.

  As you have only one IP public (on the WAN port), you only have a single port 443, you can support two services outside-to-inside.

  The cheapest solution is one of the services to another port, if the service permits.

  The most expensive solution is to have public IP addresses.

• Need some advice FC...

  .. .wondering if someone can give me some advice on fiber channel.

  We are running two without: a former EMC NS20 and a new HDS. Both have CF, but only to systems meeting some, Lun most are iSCSI. We have two switches Cisco MDS 9148 for HA. We currently have a c7000 using iSCSI to one of our SAN systems, all the blades in this system are running ESX 4. I would add this c7000 CF, but I am interested in refurbed 4 Gb CF because we are more expansion of this system (we have an another c7000 using FlexFabric for newer blades).

  I've been searching online trying to figure out what that HBA and interconnection modules would be appropriate. I ran in the QLogic QMH2462 HBAs, Emulex LPe 1105 and I wonder who works more own with ESX 4 and would play well with our switches. I also met a few IC modules options: the "HP 4 GB Virtual Connect Fibre Channel Module" and the "Blade switch Cisco MDS 9124e.

  So I wonder if anyone has any advice what may work better in my configuration. And what experiences anyone could have a similar setup.

  Thank you

  -Mike

  ... QLogic QMH2462 and Emulex LPe 1105 HBA...

  IMO, you can use one of the HBA without problems. I've never had problems with QLogic or Emulex no matter if used in servers in rack or blades.

  ... the "HP 4 GB Virtual Connect Module Fibre Channel" and the "Blade switch Cisco MDS 9124e '...

  The Virtual Connect module is only an option for a C7000 with Virtual connect Ethernet IC modules. I did not work with Virtual Connect from this so far (with the exception of the HP ASE training). I mainly use the Brocade or Cisco IC. In your case, I'd probably go with the Cicso (from the perspective of management), since you already have the switches DMS 9148 in place. However, as you may know, HP and Cisco are not best friends more

  André

• Need some drivers for my Satellite A100 WXP

  Hello

  because the virus had to reinstall windows XP. found most of the readers on the site disappeared.

  However still not get wlan and lan to work. still not working shows in Device Manager: * Ethernet controller, mass storage controller, SM Bus controller.*, network controller

  I'm not more skilled with the PC, so in the hope of a few simple instructions: P

  I found the drivers LAN from here: [http://uk.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=UK | http://uk.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=UK] but if I redirect disk update file are preserved, does not recognize the above controllers (maybe they are not related to the LAN?)

  I just want to make it for the internet still works once it's my wifes laptop and after almost two weeks trying without success is not happier.

  Any help is appreciated.

  At has first of all tell us please what A100 you exactly (A100-xxx).

• Re: Need some drivers for Satellite C50-A-1JV

  Hello guys,.

  I have a problem with drivers for the laptop model TOSHIBA Satellite C50-A-1JV, I have used and installed all the drivers I could find on toshiba research pilot app but with no use, I need the drivers for the video card, WiFi, sound...
  Please give me a hand with this...

  Hello

  I ve checked section download Toshiba for your machine and all the drivers, tools and utilities for your laptop model are ready for download.

  To be honest I don t understand what do you mean with none of them worked for me.
  Can you please explain to us what exactly is happening?

  I mean if the operating system is installed properly all you need to do is download stuff offered one by one from chipset, screen, sound, LAN, WLAN and all other drivers. Then start to install the utilities and tools specific to Toshiba.

• HP 15-r045sr: need some drivers for HP 15-r045sr

  Hello.

  Please, help me, I need some drivers.

  Network controller

  PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C & REV_00
  PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C
  PCI\VEN_1814 & DEV_3290 & CC_028000
  PCI\VEN_1814 & DEV_3290 & CC_0280

  SM Bus controller

  PCI\VEN_8086 & DEV_0F12 & SUBSYS_2213103C & REV_0E
  PCI\VEN_8086 & DEV_0F12 & SUBSYS_2213103C
  PCI\VEN_8086 & DEV_0F12 & CC_0C0500
  PCI\VEN_8086 & DEV_0F12 & CC_0C05

  PCI device

  PCI\VEN_10EC & DEV_5229 & SUBSYS_2213103C & REV_01
  PCI\VEN_10EC & DEV_5229 & SUBSYS_2213103C
  PCI\VEN_10EC & DEV_5229 & CC_FF0000
  PCI\VEN_10EC & DEV_5229 & CC_FF00

  PCI encryption/decryption controller

  PCI\VEN_8086 & DEV_0F18 & SUBSYS_2213103C & REV_0E
  PCI\VEN_8086 & DEV_0F18 & SUBSYS_2213103C
  PCI\VEN_8086 & DEV_0F18 & CC_108000
  PCI\VEN_8086 & DEV_0F18 & CC_1080

  HP Truevision HD

  USB\VID_04F2 & PID_B40E & REV_6934 & MI_00
  USB\VID_04F2 & PID_B40E & MI_00

  AND (looks like it's my mouse)

  REV_0010 & USB\VID_13EE & PID_0001
  USB\VID_13EE & PID_0001

  You are the very welcome.

  So, I just owe you the pilot of the universal camera... back to the site, here it is...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827&swItemId=ob_141708_1&swEnvOid=4058

  You will also need the cyberlink youcam software...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827&swItemId=ob_133024_1&swEnvOid=4058

  You can try to uninstall the device mouse, reboot and see if it is properly installed.

• Flash newbie needs some advice on a project

  Hey guys,.

  Thought I'd ask you guys to a general approach on a project I'm starting.  I have a background in computer science, so I lose patience with some of the beginner step by step tutorials that are out there online / in books.  What I lack, it is for you guys to let me know what will be important for me to learn what I want to do and what are the aspects of the Flash I can go without.

  I'm a grad student in Psych clinical and I want to build an interactive processing application.  Which basically translates to is that he will have a series of screens with text, sound, and video clickable icons that will show small films, I developed that my views on the principles of different treatment.  Anyway, I just wanted to know if you guys could give me advice on the best way to do it.  I can animate text and it's kind of basic, but I feel like I kind of sense in the dark right now and do not want to waste too much time on dead ends.  If you guys can give me an idea about the basic components of Flash, I'm going to need a solid understanding of creating a project like this, I would really appreciate it.  I'm sorry if it is vague, just trying to reduce the amount of time I spend of experimentation and if you guys could tell me precisely these modules/tools in the application that I have to use to do this I can take it from there.

  Thank you!

  -Ricky

  If you are looking for shortcuts, you're not likely to find.  The essential elements you need to know to start with the basics and expand from there.

  One essential thing you should learn is how to find and solve things by yourself using the Flash help documentation and a good search engine like Google.  Almost all the objects/classes have 3 basic elements (properties, methods, events) you need to understand how use/manipulate, and they are all identified in the help documentation.

  If you want to work with videos, start digging to learn the different ways that you can integrate... using a FLVPlayback component or the NetStream class.  If you want to learn how to work with audio, then dig learn how to use the Sound class.

• Need some drivers for my Satellite A210-10 WXP has (PSAEL)

  Help me please!

  I need drivers XP modem, video and audio for my laptop (Satellite A210-10 a (PSAEL))
  I found the download links for the video card, but I can't download driver! It is not available!

  I need this driver, because my work with WinXP, but I can not install all the drivers correctly.

  The fact is that XP can be installed on the A210 and XP will run.
  On the European driver Toshiba page, you will find some common XP drivers, but not all.
  If you miss some XP drivers graphic driver, audio driver, etc. use the XP drivers from the manufacturer of the chip or the Satellite series others which have been equipped with the same features and as A210!

  PS:
  Have you seen this thread?
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26818

  It s interesting and useful

• Need some advice on the best way to do specialized source distribution

  I need to give a customer a labview block, they can use our material in their own labview code that will read the (encrypted) data net senor off the coast and the flow of data in a form usable output.  I built a vi that can be used in a loop, a bit similar to the block of canned labview data acquisition that can be used to acquire data from products OR.

  There are many sophisticated (and secret) algorithms going on in the background which make sense data and translate them into a usable data table, but also configure the hardware itself. Accordingly the only final vi I prepared to distribute the client makes use of Subvi about 20. Almost none of these subvis could be ideally be reconverted in plain code in main vi, nor what I want to do this.

  The rules of the game is the following: I want to give him the block I created to use its own code, without him to see what's happening inside the vi.  I can deny him access to the block diagram/s, no problem, but I don't want to give him access to the subvis, to use, or even to know their names - preference they would be hidden or otherwise pre-compiled. Preferably I would just give him the main block only, perhaps with some support files that would be entirely opaque to him.

  Looking for advice on the best way to go. There is an elegant solution to this problem? For example, it would be better to compile the block as a .dll file, and then write a wrapper vi any?

  Have you thought of creating a packed library? You can also password protect your code. You can delete the distributed code block diagrams. You can use a combination of the above as well.

• SF200 48P... Need some advice

  Hello and thank you for reading my post.

  I currently have a small network that looks like this... SMC cable modem (with static IP) > RVO16 > connected to some computers and printers > 4 port linksys switch > connect multiple PCs and POS.

  What A location.

  I have another place that looks like this... Cable modem (dynamic IP) > RVO82 > connected to computers, printers and the POS.

  What location B.

  The locations are connected by a tunnel that is used daily and intensively.

  Here are the changes that will happen at A location, I have purchased ip phones and we'll be adding several new computers, printers. all to be connected to the new SF200 48P I bought. It was mainly for ip phones and the POE ports, but looks like it should work well for the whole of the network.

  Should I be setting up small VLANs to say each office which will consist of one IP address and telephone, computer and printer..., there will be about 8-10 like this.

  I want to keep offices and connected places and maintain security at a good level. I need quality of Service for ip phones.

  Not really sure if I should use the RVO16.

  Also wondered if maybe the RV180W-A-K9-NA would be a good choice instead of the RVO16 because it also has VPN.

  I intend to update location B with a new switch, IP phones, computers and printers as well. (next year as cost is the factor of this year)

  Any thoughts would be appreciated.

  Thank you

  Steve

  Hi Steve, the RV016 supports multiple subnets and VLANS based left only.

  The RV180 much better address this traffic because it supports the 802. 1 q VLAN.

  -Tom
  Please evaluate the useful messages