I need the complete installation rather than the stub installation file version. Several computer installs save internet bandwidth during the complete installation is downlo

Similar Questions

• Xp pro installation gets past the copied installation files and then restarts, rather than continue with install it starts from the beginning again.

  new installation of XP pro on a Dell Inspiron mini

  Xp pro installation went copied files Setup then restarts, rather than continue with an install it starts from the beginning again, laptop is configured to boot from the hd, but does not do that, I reset bios to default and hd settings has been reformatted, the cd for this laptop drive is usb because it has not built in 1... If I try and I remove the usb cd when reboots after copid setup files it told her there is no operating system...

  any help much appreciated...

  Hi, Leon,

  Always include computer make and model, please.  Thank you.

  Research in the Bios (reboot and press F1 or F2 depending on your system, check that all usb options are enabled (for example, USB legacy or support for USB 2.0 devices).)

  If there is a timeout parameter, set it to Max.

  Then, find the boot device priority section

  A USB flash drive, which is usually listed as USB - HDD, but may be listed as a removable device, will have a priority very low start.

  Rearrange the boot device priority so that the flash drive has a higher priority than the hard drive.

  Install Windows XP from USB key

  • Insert the USB key into the USB port on the computer.

  • Open the "I386" folder and find the file "Winnt.exe".

  Double-click on the "Winnt.exe" to launch a command prompt BACK to an installation of Windows XP.

  Type the path of the location of your "I386" folder in the DOS window. For example, if your USB is the letter "D" in your "My Computer" window, type "d:\i386" without the quotes and press the Enter"" key.

  Let the installation program copy the Windows XP installation files on your computer.

  Restart your computer to a command prompt. The Windows XP Setup will continue automatically.

  Follow the on-screen instructions to complete the installation. The program will ask you your Windows XP product key in this process.

  http://www.ehow.com/how_6912418_install-Windows-XP-USB-drive.html

  Make a bootable memory card or USB key using PEBuilder

  http://www.tech-recipes.com/Rx/2583/making_a_usb_drive_or_memory_card_bootable_using_pebuilder/

• Adobe Illustrator CS6 My trial expired, I need the serial number to complete the installation, but my account does not have the serial number

  Adobe Illustrator CS6 My trial expired, I need the serial number to complete the installation, but my account does not have the serial number

  Find the serial number of your Adobe product quickly

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat

  https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp

• I am trying to be moved from the first, but in the list of adobe programs to download, rather than see the installation option, there is only the opportunity to evaluate, and once the download is finished the program will not open. What should I do to dow

  I am trying to be moved from the first, but in the list of adobe programs to download, rather than see the installation option, there is only the opportunity to evaluate, and once the download is finished the program will not open. What should I do to download the first?

  If you have a first subscription (check here, Adobe ID) and you have a 64-bit computer, Troubleshooting FAQ: what should I do if I have a subscription, but my application acts as if I had a trial?

• have 5 LR and CC. The folders are different, some are missing in the CC. And some complete are not available in CC. I'm looking forward to use CC rather than LR5 so how can I make the folders and collections even on each?

  have 5 LR and CC. The folders are different, some are missing in the CC. And some Collections are not available in CC. I'm looking forward to use CC rather than LR5 so how can I make the folders and collections even on each?

  Hi cjohnm,

  You can use the 5 Lightroom Catalog and improve it in Lightroom 6, therefor all folders and collections will be identical in both version.

  Open the Lightroom all holding the key Alt/Opt and select only the 5 Lightroom Catalog and it will switch to it.

  Let us know if that helps.

  Kind regards

  Mohit

• Games purchased on the internet that have been downloaded, rather than a cd copy?

  Is it possible to copy a game I bought off the internet that I could use to reinstall the game with if my computer goes down? I went back to my computer it is 'out of the box state"twice and lost a lot of things. I am a member of an online gaming site, but won't continue to pay for it indefinitely and would like a return to the games I bought purely and simply from them but has been downloaded on the net rather from a cd. Any way to do it?

  Is it possible to copy a game I bought off the internet that I could use to reinstall the game with if my computer goes down? I went back to my computer it is 'out of the box state"twice and lost a lot of things. I am a member of an online gaming site, but won't continue to pay for it indefinitely and would like a return of the games I bought purely and simply on their part but has been downloaded on the net instead of a CD. Any way to do it?

  I think that the initial response missed the fundamental question of OPs here. Laughing out loud

  Yes you can do it. You have to find where it has been downloaded installation package, and then simply burn it to a CD/DVD or copy to a second external hard drive.

  Find that files can be tricky depending on the site on which you bought them since I used Steam and D2D EA. I find that D2D is the easiest to find, in full-on my default download folder. :) In fact some games when it is burned on a DVD becomes actually identical to a retail copy. EA has been a little hard to find, but I was able to locate them and save them. They seem to end up in a temporary folder that is nested in the EA downloader program folder. I have a Steam game only and did not bother to look, is installing the files, it was not very large, so another download won't kill me. For any other service, I can't say I'm afraid, but they shouldn't be too hard to find.

  Now as to when you don't have to reinstall a game, the first response was quite correct. Things will vary depending on the site that provided the file. Actually it is a website providing different editors, things vary even from game to game. For example, I bought the lions share of my download of D2D games, Gothic 3 necessary only the time of an audit the first that I installed it, with many patches community game, I did about 4 uninstall / reinstall and everything was perfect. However, I have 2 Ubisoft games, man needs to be reactivated almost every time I install new drivers video, as well my account for the game was only 5 reactivations until I emailed D2D. The other match, settlers, needs than the wake on a reinstall.

  So, my advice is to check with each provider, as to what happens if you use a back upward rather than download it again very carefully. If they try to tell you that you cannot save all files, you must explain to them it's your legal right to do back ups . That is, your just not allowed to circumvent any copy protection check / user in the process.

• When you move the cursor, rather than move, the police often changes a size big or too small to see.

  Original title: "when I try to move the cursor, instead of move, the font size often changes to a huge size or one size too small to see. In addition, it can jump to the top or the bottom of the page. »

  More I use Vista, more I hate it!

  It came pre-loaded on my Fujitsu Lifebook. I had heard talk were many complaints about Vista and I wanted to stay with XP or Windows 7.  Each manufacturer of the laptop has been unfortunately Vista preinstallation.

  • When I use the word processor Works Windows, sometimes without warning he automatically becomes italic police without any input from me.
  • If on Windows works WP or on any page of e-mail online, when I starts to move the cursor, a little 'target' - as the icon appears when the cursor was and, either changes in font size of microscopic or 500% or more.
  • On the Internet page of wole can shrink or get huge.
  • At other times, with one touch of the mouse or touchpad, rather than the font change, the cursor may disobey my entry and the end to the top at the bottom of a page where I won't be, or somewhere else. When I get back to the expected location, it can repeat the same action three or four consecutive times before to behave normally again.  This makes typing manuscripts or very frustrating messages sometimes, not to mention a lot of lost time.
  • When you try to type copy from a printed script, if I don't keep control of the screen I can finish with margins stange, italic where they belong or phrases that are moved where they belong.
  • Sometimes when I'm trying the high - lite a word or phrase so I can drag it to another location, it will refuse to high light, making necessary use rear brace to delete the words I want to drag and retype the words to the new desired location.
  • Another problem is that the will of cursor down stubornly and turn several times since the location of the Center to the extreme side so that the rest of the page is covered.  Vista seems to have a mind of your own.

  This set of problems seems to migrate from MS Word to MS Works, Web pages, and e-mail message composition.  I thought it was the new computer initially. I even returned it to Fry's electronics for maintenance two times.  I mean, they just excanged for another new Fujitsu Notebook.  When I got home, the replacement computer have behaved in the same way, which indicates that it's the software, not the hardware.

  Funny thing - now that I complain on this topic in this forum and have written this much, it doesn't have behaved badly again!  The ghost of Vista must have been scared and went into hiding.  ;-)

  Yet once more I use Vista, more I hate it!  -especially since I was in the middle of writing a book for publication.  In light of the frustration and the loss of my precious time because of these persistent bugs in recent months, I wish MS would trade my copy of Vista for Windows 7.  MS seems to be getting a reputation for releasing Beta quality software and call it a finished product.  You would think that MS wakes up to the fact that consumers expect to have for their money.  Everyone has the same problems?

  Are there realistic solutions out there?    Hmm, no spell no checker on this page.  Sorry for the typos. :-)

  You can get in trouble with your mouse device drivers, firmware and/or software.  This may be due to a Microsoft Update or any number of things (and could have happened to these two machines, if you did the same thing in both cases).  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (and you should get for your mouse at the very least and I consider the keyboard as well and make sure they are compatible with your device, and your version of Vista) and all you have time to do - they can help way beyond simply solve this problem) leave the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows:http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  Also, your mouse may have the functionaality to change the font sizes and jump from one end of the screen to another by doing some things.  Read the user manual and/or research through start / Control Panel / mouse to see if this is the case and if so, it may be able to be disabled.  The problem with some of these "features are that if you don't know about them they can cause difficulties when they activate for apparently no cause when you actually not what caused the feature must be enabled." It took me a while to realize the CTRL-0 would change my IE screen at 100% size and I first thought there was something wrong until I discovered the problem by chance.  I say that, because the odds of two computers with the same exact defect are astronomical - it looks more like a problem as described above or a certain type of function you are unaware of (perhaps in combination with a keyboard input that is why I suggested that you update those as well).

  I hope this helps.  If not, I am sorry to say that your best option would be to go back again to see if they can reproduce the problem (you use your way computer in case it is something you do) and either repair or replace again (or change to another computer entirely).

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I close a tab that has locked up, rather than farm the whole browser to be insensitive?

  I have a bad habit of having several tabs open. If I click on a link that translates the whole browser becomes unresponsive, how do I close the tab offending rather than having to close the entire browser and losing all my tabs?

  It is not a bad habit, it's normal.

  Unfortunately, there is currently no way to 'kill' a single tab without picking up Firefox.

  A few times a week I get "not responding" when I exceed the amount of memory Firefox can use. Usually about 60-90 seconds, I can close Firefox by using the menu, either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit
  • These same keys in order:Alt f x

  Freezes caused by other reasons could not out, in which case you get stuck. Prevention is the best cure.

  This support article covers some common reasons for freezes: Firefox crashes or does not - how to fix.

  Since the Flash plugin can also cause this problem and it is used everywhere around the web, I suggest the following to minimize potential problems with Flash in your troubleshooting:

  (1) to avoid unnecessary pain on the sites where the Flash is not really essential, try to set the Flash on Click-to-Play (Ask 'activation'). This will delay the Flash start on a page, until you approve.

  To set 'Ask to activate', open the page modules using either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. Search 'Shockwave Flash' and always change 'enable' to 'ask to activate '.

  With this setting, when you visit a site that wants to use the Flash, you should see a notification icon in the address bar and usually (but not always) one of the following values: a link in a gray rectangle dark in the page or an information bar sliding between the toolbar and in the page area.

  The plugin notification in the address bar icon usually resembles a little Lego block, dark gray. (If it is red, Flash must update.)

  The delay in the activation of Flash can help distinguish between the problems caused on the initial page load, put in folds and script activation vs Flash/loading bar.

  If you see a good reason to use Flash, and the site looks trustworthy, you can go ahead and click on the notification icon in the address bar to allow Flash. You can trust the site for the time being or permanently.

  But some pages use Flash only for tracking or play ads, so if you do not see an immediate need for Flash, feel free to ignore the notification! He will just stand here in case you want to use it later.

  (2) a common cause of errors in script does not work in Windows Vista and later is the feature of mode of the Flash player plugin. This feature has the security benefits, but it seems to have serious compatibility problems on some systems. You can disable it using the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. On the right side, find 'Shockwave Flash' and click on the link for more. Then uncheck the box for "Enable Adobe Flash protected mode" and try it for a day to see if that helps you.

• When I press the Apple and R keys at the start of my old iMac just boots to the old system rather than start to install new sound system. Help

  When I press the Apple and R keys at the start of my old iMac just boots to the old system rather than start to install new sound system. Help

  Command-r does not work on a 10.6.8 system, you would need 10.7 Lion or better to do. If you try to install a new system and that you have already downloaded, then go to your Applications folder and double-click "install OS X...". »

• I need the simple installation mode of firefox 5.0 on my eeepc 900 (default Xandros Linux) - I used to install 3.0, but is now obsolete

  the ed-meister has provided an excellent simple mode for the installation of version 3.0 of firefox and I did it correctly, but then when I looked at the edits, he said that I need to upgrade to firefox 5.0 and I need the simple mode for linux and I don't know what to type in the terminal/console

  Thanks for your help if necessary

  Check with the EeeUser forum to see what they have to say.
  
  http://Forum.EeeUser.com/

  I don't see Installing a browser 2011 in a 2007 operating system. I replaced Xandros with Easy Peasy 1.6 some time ago, 3.0 and 3.5 were too darn slow on Xandros even with the GTK update. A 900MHx processor will never be a speed demon, but you I have to give him a chance with a better than Xandros OS.
  Personally, I stay with 3.6.x until the end of the support. I don't see the need to upgrade to the latest version of Firefox now, especially on Linux.
  
  http://www.geteasypeasy.com/

• I forgot the answer to my security question rather than I sent to apple to get back the answer. but Apple did not answer me pleas help me >?  iPhone 6 9.2ios

  I forgot the answer to my security question rather than I sent to apple to get back the answer. but Apple did not answer me pleas help me >?

  iPhone IOS 6 9.2

  You will need to talk with the security of the accounts to AppleCare. Be sure to have your ID ready PW and Apple because you need sigun in Id.apple.com to generate a temp support PIN, then be able to provide one more piece of the verification of identity, they can reset your questions for you.

• How can I get a formula refer to the text in the cell rather than the data?

  I've formatted some cells to show 0 if the calculation is a negative number, but how do I get another formula using the value 0 (rather than the negative number that is in the data) when calculating?

  This one is stumping me!

  HI WS8,.

  Formulas will use the value in the cell. A 'format' only controls what is displayed and does not change the actual value contained in the cell.

  If you want a formula for use 0 in which case the actual value in the cell is negative, you will need to do one of the following:

  1. Revising the formula to create the value in the source cell to return a zero if the calculated value is less than zero:
     = MAX (0,formula)

     OR

  2. Revise the formula that returns the value in this cell (B2 in the example below) to convert values less than zero to zero.
     Current formula: = B2 * 1 k
     Revised formula: = (MAX (0, B2) * k)

  Kind regards

  Barry

• HP Pavilion 11-n010sn x 360: rather than the special keys function keys

  Pourrait function keys that are rather than special purpose keys function keys. And I need to be exactly the function keys that access you without using the fn key.

  shmoogar wrote:

  Pourrait function keys that are rather than special purpose keys function keys. And I need to be exactly the function keys that access you without using the fn key.

  Turn the key to the Action from the BIOS

• Is it possible to make Internet connection sharing by the command line rather than the GUI on Windows Server 2008?

  Hello world!

  I need program/reset sharing Internet connection by the command line rather than GUI tools under Windows 2008 Server (could be a .cmd to run startup script or the programmer). Is this possible? Or there is some registry keys I need to set/restore and restart some services?

  Thank you very much.

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Server on TechNet. Please post your question in the TechNet forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Can you assign the time of windows logon minutes rather than hours?

  Can you assign the time of windows logon minutes rather than hours?

  If you are referring to the TIME parameter net user, which is limited to increments of one hour.

  If you want to control (and the ability to force logoff as well), you will need to use a third party software.  Access Boss a 15 minute granularity.  I'm sure like many other applications, probably some of free.

  If you only want to restrict Internet access (rather than access to the computer itself), your router may be able to restrict access with granularity to minutes.  "Parental control" software, such as NetNanny, also restrict Internet access, although that usually not at the minute.