I need to add more memory on my c of the portion partitioned drive.

Similar Questions

• HP Envy 17 Notebook 3002ea - need to add more MEMORY...

  Hello

  I have a HP Envy 17 laptop 3002ea (number of product A2Q36EA #ABU) with the following characteristics:

  HP ENVY 17 Notebook PC model system
  System Type x 64-based PC
  Processor Intel Core i7-2670QM 2.20 GHz, 2201 Mhz, 4 Lossnay, 8 logical processors
  Hewlett-Packard Version / Date BIOS F.08, 11/07/2012
  SMBIOS Version 2.7
  Physical memory (RAM) installed 8.00 GB
  7.95 GB total physical memory
  4.66 GB available physical memory
  15.9 GB total virtual memory
  10.8 GB available virtual memory

  I want to add more RAM, preferably another 8 GB (I use the laptop for work in post production, animation, editing the videos etc.). Please could someone advise me:

  WHAT should I buy?

  WHERE I can buy it?

  HOW to add in my laptop / install it?

  I am a complete novice when it comes to laptops!

  Thanks x

  Hello

  Unfortunately, 8Gb is the maximum ram (IE 2 x 4 GB modules) which can be installed in the machine - I have used the same model exactly myself.

  This can also be confirmed on the following link.

  http://www.crucial.com/UK/store/listparts.aspx?model=envy%2017-3002ea & cat = RAM

  Best regards

  DP - K

• Add more memory esxi

  Hello

  I intend to add more memory to a server R910 esxi 4.1 production in a cluster. I intend to do following steps:

  DRS manual change

  VMotion all the vm off the host

  Put the host in maintenance mode

  Host of the judgment

  Add memory

  Start the host

  Check if additional memory

  DRS auto change

  We did the test memory on the server when it was put in the cluster.

  Is it necessary to do a memory test again, while adding additional memory?

  Thank you

  usr345 wrote:

  Hello

  I intend to add more memory to a server R910 esxi 4.1 production in a cluster. I intend to do following steps:

  DRS manual change

  VMotion all the vm off the host

  Put the host in maintenance mode

  Host of the judgment

  Add memory

  Start the host

  Check if additional memory

  DRS auto change

  We did the test memory on the server when it was put in the cluster.

  Is it necessary to do a memory test again, while adding additional memory?

  Thank you

  Nope.  You don't need to get out of DRS, just perform a manual migration of VM (put it in maintenance mode).  Now he died in maintenance mode. Then when you add memory and start it... This isn't on the cluster, giving you the chance to test the memory... (to see if it's visible).  At the start of the BIOS memory test just...

  When you see that the memory is fine, then you can exit maintenance mode...

• need to add virtual memory according to my computer, using XP, 32 bit, except 3 Pk

  My computer has been running really slow despite usin a system cleaning program. I went through and deleted a large number of * I didn't need this use to be my desktop computer which was connected to a file server. Now I use it at home as a stand alone PC. I've done everything I can and it is now telling me that I have to add virtual memory or more RAM. I have not studied the cost of more memory RAM, but money is a problem for me at the moment. How can I add virtual memory at this time? I have 19GB of available storage memory, that's not the problem. Sincerely, Joyce

  The amount of physical RAM you have (right click on my computer, then select properties)?

  What applications are running when you receive the warning "low virtual memory"?

  Check if Windows manages virtual memory (which should be) or if this parameter has been "twisted" to try to "tune up" your computer.  Right click on desktop, select Properties, and click the Advanced tab.  Click the settings button in the box of 'Performance '.  Click the Advanced tab, and then click Edit in the box of 'virtual memory '.  Make sure the system drive (generally c :)) is selected and then make sure that the option to "System managed size" button is selected.  If the box is unchecked, let and click Set and OK your way out.  If the managed system option button size is already selected, simply cancel your way.

  As a general rule, it is best to let Windows manage virtual memory, but you can read the material here to get some to understand what is going on:

  The article starts here: http://www.theeldergeek.com/paging_file.htm
  But do not forget to read this page: http://www.theeldergeek.com/sizing_the_page_file.htm

  If Windows manages virtual memory, and you have enough physical RAM, you should check your computer for malware.  Download, install, update and run each of these two free scanners:

  MalwareBytes AntiMalware
  SUPERAntiSpyware

• Add more memory to my iMac will accelerate it?

  It runs very slowly - has only 4 GB of memory installed.

  It seems relatively easy and inexpensive to install more memory, but how do you know if lack of memory causes the slowness?

  When I go about this Mac, there is tons of storage space. I guess that the Intel Core 2 Duo processor is pretty run down...

  Hi Karena13,

  SHORT ANSWER: Yes, it will probably accelerate.

  Storage and memory (RAM live) are two different things. Let's say your computer is a library. Storage is the box with all the books on the shelves, while your RAM is the table that you are using.

  If you take more than 95% percent of your storage space, it's as if you stored books on the floor between the shelves: you will get work more slowly.

  If you have a smaller table, you will also lose efficiency, because you will not be able to everything you need to put on the table.

  Both are important, but they are different.

  You can check your use of memory (RAM) using the activity monitor (you can find it in the Utilities folder in your Applications folder). Use the monitor activity on your Mac - Apple Support

• Model: P7-1414: add more memory

  Hello

  Currently, my office is running with 2 x 4 = 8 GB ram (memory in the slot 1 and 3).  I want to add more in the location 2 and 4 to 16 GB.  Is this serious for 4 GB in slot 1 and 8 GB to 3?  or should the 2 x 8 in slot 1 and 3 and 4 GB in slot 2 and 4 GB in 4?

  Please let me know.

  Thank you

  WND

  WND

  Hello

  To qualify for the dual channel, please install same features same RAM on the same locations of color. (blue goes with the blue wire and...).

  Kind regards.

• How can I add more memory card video graphics integrated on Satellite L30

  I want to allocate more memory to my chart.

  How can I do this?

  I use Vista Home OS.

  Thank you very much.

  It will be interesting to know what model of laptop you have.
  Either you have a defined memory or with shared memory graphics card.
  The shared memory card also uses RAM for video operations.

  You can upgrade RAM to the maximum level and then your graphics card can use more RAM for clean operations.

• Add more memory

  I am currently using a Pavilion DV6000. Currently, it has 512 MB of memory and have considered really upgrade to more memory because its quite slow to load things. After you open Itunes and use the internet at the same time are quite difficult for her as well. Upgrade to 2 GB of memory will be a great help? My hardrive is also very complete. A full hard drive slowing down the computer as well right?

  Ok thank you. So, just to make sure I get the memory, here's my laptops card:

  http://support.HP.com/us-en/document/c00770899

  and the memory that I find appropriate for my computer:

  http://www.shopping.HP.com/store/product/product_detail/FQ858AA/1?JumpID=in_r329_personalization/browse1/landing_PDP

  is it good?

• Add more memory for hp nc4200 - stupid question

  I know it's probably a stupid question, but I'm trying to insert more memory into my old laptop for my son. The vehicle currently has 1 GB of memory that I see when I take off the lid, but there apparently also 512 MB that I can't see. I thought of taking the 512 MB and replace it with a stick of 1 GB giving my son of 2GB, but I'm sitting here, after removing the cover and although I can see where is the 1 GB, I see no sign of the 512. Are the memory sticks in two places, not one, and if it's a how to insert the 1 GB when there is not enough space?

  Hello

  bbsmallkid wrote:

  I know it's probably a stupid question, but I'm trying to insert more memory into my old laptop for my son. The vehicle currently has 1 GB of memory that I see when I take off the lid, but there apparently also 512 MB that I can't see. I thought of taking the 512 MB and replace it with a stick of 1 GB giving my son of 2GB, but I'm sitting here, after removing the cover and although I can see where is the 1 GB, I see no sign of the 512. Are the memory sticks in two places, not one, and if it's a how to insert the 1 GB when there is not enough space?

  DDR II SDRAM, 400 or 533 MHz, two locations SODIMM, 256/512/1024 MB expandable to 2048 MB maximum

  Here is a link to the welcome and maintenance guide.

  It is an internal memory and an external memory module. Replace the external module is quite simple. Access to the internal memory card requires a dismantling. See page 6-28 in the manual.

  Best regards
  ERICO

• I need an add-on for close tabs automatically when the link is redirected in mozilla firefox

  Hello...

  respected sir
  i need an add on or any software to close tabs automatically...
  when the link is redirected in Mozilla Firefox
  

  pls help me out here...
  If it's them I'm going to pay for it
  I need immediately...
  Thank you

  How is this different to open this link in the same tab?

• How can I add more than 2 audio tracks on the same blade?

  Well, I'm just trying to include more than 2 audio tracks on the timeline. The audio tracks to be included in the project are around 10, but whenever I simply drag and drop a new track on this specific slide, which already has 2 (1 said track 1 (music video) and the other just track 3) I get a message asking me if I want to change the audio for this slide. Help!

  Hello

  Any individual slide can have only one "track". This is normally where will the audio narration. But if you want more than one audio clip to play, you can get there by inserting an object such as a box to highlight, configure it as basically invisible by setting alpha good value and cerebrovascular accident. Then by adding audio to the highlight box.

  Add a second box to highlight if you want a third clip to play. Repeat if necessary.

  See you soon... Rick

• Add more memory RAM

  How to add memory to the PC all-in-one HP 100 b?

  I bought this as a bundle to the Tiger Direct site. The memory module that was included was a Kingston KVR1222D3S9 / 4G... I see no way to get into the unit without any disassemble... Hummm

  Thanks in advance

  John Allen

  I had the same beam.  Yes, you don't have to disassemble.  It's really like a laptop big.

  Remove the 5 screws around the outer edge (at the back of the computer).  Then look at the bottom edge of the computer.  There are about half a dozen slots, who ran a flat screwdriver will fit in.  From one side, insert a screwdriver in each unit and the twist.  You may think that you're going to break, but each lock will jump.  You probably tooth / warp the plastic at the point of the slots, but you'd see only that when you look at the bottom of the computer, so no real problem.  Pop all the locks, and it opens like a clam shell.  Looking at the back of the computer, you will see a large metal plate.  Near the upper left corner is a small (2 "x 3" or more ") Panel with one screw holding it in.  Remove the screws and the memory.  At this point, it's pretty simple.

  You will see 6 GB of memory installed but only 2.5 available.

  To use all 6 Gig...  The machine is supplied with Windows 7 Professional 32 bit.  You can do what I did, call HP, ask them to send you the disk for Windows 7 Professional 64-bit, and they will ship one to you, free of charge.  Recharge it with the 64-bit version, and you should be able to use all the memory.

  Memory installed last night, called HP tonight.  You can do the online chat.  It took almost 2 hours to spend on their phone support.  Surprisingly, the guy I talked to seemed knowledgeable enough and very reasonable.

  Good luck!

• norton360 installed V5 old om computer gateway w / 512 k mememory always tells me to add more memory.

  I can put the hard drive in a new gateway Pent IV w 4 memory locations and can take 4 gig of memory has a bad hard drive and will be given to me. my hard drive of 320 GB of my Pent III bridge works without problem has XP installed Prof. I don't want to not have a licensed copy on the hard drive that works.

  Yes and no.  Yes, your hard drive of 320 GB should work just fine in the newer computer.  However, if you think to move the HD from your old computer, directly on the new computer, as it is with the operating system and all programs and data intact, the answer is no.

  You will need to reformat the HD and reinstalling the system operating and all drivers appropriate for the new components of the system.  In addition, if Windows XP Professional you currently have is OEM version of a computer manufacturer, then you will not be able to move from the old computer P3 to the newer P4 computer.

• Add more memory to m9600t

  I have HP Pavilion Elite m9600t PC.

  My motherboard is

  Manufacturer PEGATRON CORPORATION
  Model of TRUCKEE
  Intel chipset provider
  Model X 58 chipset
  Chipset revision 12
  Southbridge Intel supplier
  Southbridge model 82801IR (ICH10R)
  Southbridge revision 00

  On the HP Page, it says:

  Memory

  Must select one of the following options:

  How ' end it since it is a match more closely to what you already have in your pc: it is only $1.00 more. PC3-10600

  http://www.Newegg.com/product/product.aspx?item=N82E16820148247

• Can I add more memory?

  
  

  Hello cindyann,.

  NetBook Acer D-1606, I guess that's a Aspire One D270 (AOD270).

  In this case, your laptop have only one memory slot and the maximum is 2 GB.

  You can change the memory stick 1 GB with a 2 GB.

  You will find the memory part number with these search tools:

  Corsair Memory Finder

  Essential Advisor tool