I need to adjust my bios so that my usb ports are active immediately.

Similar Questions

• You need to set the drive letter to the USB Ports front before any device has been inserted - that won't change when the device is connected. I have Windows XP Professional with Visual Studio 6 installed

  You need to set the drive letter to the USB Ports front before any device has been inserted - that won't change when the device is connected. I have Windows XP Professional with Visual Studio 6 installed. Thanks for your help

  diana73,

  First of all, make sure that you're connected Administrators account to do.

  How to change a drive letter to change an existing drive letter on a drive, on a partition, or a volume, follow these steps:

  1. Sign in as an administrator or as a member of the Administrators group.
  2. Click Start , click run and type compmgmt.msc .
  3. In the left pane, and then click disk management .
  4. Right click on the drive, the partition, the logical drive or volume that you want to assign a drive letter to and then click change drive letter and paths .
  5. Click change .
  6. Click assign the following drive letter if it is not already selected, click the drive letter that you want to use, and then click OK .
  7. Click Yes when you are prompted to confirm the drive letter change.

  The letter of the drive, partition, or volume that you specified is changed, and the new drive letter is displayed in the appropriate drive, partition, or volume in the disk management tool.

  Good luck! Please rate me upward if you find my post helpful. Thank you!

• The Device Manager on my Windows box lists a hub USB 3.0 as one of USB controllers. This means that one or more of the USB ports are capable of 3.0?

  I recently bought a backup disk says he would run faster is it my 3.0 instead of 2.0 USB ports.

  Just try to understand the computer itself, if one of the 8 USB ports on my desktop Dell (Windows 7, 64-bit box) is capable of USB 3.0.

  Hi John,.

  The message that Windows gives is Windows telling you put a USB 3.0 device in a USB 2.0 slot and the speeds will be Cap using USB 2.0 footrest.

  If you are looking for your system on the website of Glens, it should tell you if one of the USB ports are 3.0 or not.  I think that USB 3.0 is marked with the blue wire around the ports.

• help that my usb ports on the left side do not work

  I have a hp pavilion dv6-6117dx. the usb ports on the left side are stoped working. I need help please...

  A factory restore can't hurt, and it can fix it. First of all, I think I'll try re-installing the AMD graphics driver which usually includes the motherboard drivers.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-98292-1&cc=us&DLC=en&LC=en&OS=4063&product=5177781&sw_lang=

• Satellite A135-S2286 - USB ports does not work after BIOS update

  I recently had the dreaded BIOS password prompt problem. I checked online to the toshiba support site and took the laptop to a toshiba authorized service center and is fixed by getting the updated BIOS updated to 1.60, but after update BIOS, none of my USB ports work.

  When I connect a USB device, a warning from yellow pop up comes up unrecognized USB device. The same USB device works fine on other computers/laptops. I searched online for a solution and found on a lot of people have the same problem, but did not find any fix for this error.

  It will be useful, if someone has a solution for this error.

  Hey Buddy,

  Is there yellow exclamation marks in Device Manager next to USB ports or they appear correctly?

  If you notice a yellow exclamation you must remove the USB port and restart the computer. All USB ports are installed automatically, you do not need an additional driver.

  I hope that it helps :)

• My USB ports do not work after that I updated. I discovered that they were not working because my mouse no longer works

  My USB ports are not working after I upgraded to don't know what could have caused this and there is no fix auto feature that opens, I discovered that they were not working because my mouse no longer works HELP Please

  Original title: hardware device

  Hello Neale,

  Two things for you to try: http://support.microsoft.com/mats/Windows_USB_diagnostics and if that does not work, try this one: http://support.microsoft.com/mats/hardware_device_problems/ .

  Let me know if one of them might be your problem.

  Kind regards

  BearPup

• Satellite Pro A120: Need to update the BIOS after upgrade CPU

  Hello

  I have a Toshiba Satellite Pro A120 and I need to update the bios of a change in cpu cause.
  The laptop works very well, but for some reason any with the new processor fan runs always full.

  A lot, I searched but found nothing.
  The model number is PSAC1E-0QL04CG3 of ideas where I can find the bios?

  THX in advance,
  John

  Hello

  First of all: update BIOS doesn t help you.
  Why do you think that BIOS update should help reduce the activity of fan?

  I guess that your new processor is faster. Right?
  So it offers more performance and this leads to higher heat dissipation... so finally the CPU must be cooled and this can be done only if the cooling module would turn faster you agree with me?

  By the way: the update of the BIOS is on the page of the Toshiba UE driver. Since the satellite Pro A120 is very old series, you will need to search for drivers in area Archive (Type of product-> Archive)

• I need to recover the BIOS of Satellite A200 - 1 M 7

  Hello

  I need to recover the bios of my toshiba. can someone tell me how to do?
  I can do it with usb floopy?
  Should what program I?

  Help, please

  Hello

  I'm afraid I n t m know what you want to do?
  You want to update the BIOS?
  Could you please send more details?

  The BIOS is focused on victory. This means that the BIOS can be updated only running Windows OS.

• Need to backup the BIOS for G480 model No. 20149 (old version of the BIOS)

  Hi, those who do not model G480 Lenovo: 20149, I really need your collaboration to provide me with your backup BIOS of OLDER version (the latest version is V9.01). My BIOS information 5ECN96WW after updating to the latest version. IM asking this because of performance problems I encountered after updating the bios with the latest version (laptop seems to start more slowly). Please help me. I need to restore my BIOS to the old version that so I need the file BIOS.rom.

  You can use 2.0(google it) BIOS universal Toolkit Backup to back up your BIOS. Click play then wait so he could read, and then click Backup after that. Save the backup file and upload it on the Internet and give me the download link.

  I used this program to save my bios and it worked fine. Thank you for your help.

  I just did some research and I found that my older version of BIOS is 5ECN33WW (V2.03). Please help me if you have this BIOS version.

  (UPDATED) I discovered that it is impossible to restore my older BIOS due to the unique backup BIOS of each cell.

• Pavilion series 6, P6 - 2220t: HP Pavilion P6 - 2220t. All security USB connections are turned off in the BIOS. Need to turn it on.

  I was told that all security USB connections is disabled in the BIOS. The only controls for this PC is USB ports for mouse and keyboard control ect.  How can I get into the bios without keyboard and mouse in operation? There is no other way to control this model computer. The only connections on this PC is only the USB connections. Again, if I can get somehow get into the BIOS I can enable security USB connections as it should.

  UPDATE,

  Fixed a problem.

  I have install a market after card bipassing USB bios usb connections.  I went in the BIOS and turned on USB connections. I figured out the EASY DIFFICULTY and solved the problem myself. No other technology needed in this case.

  Very EASY SOLUTION!

  Thank you

• one of my pc has placed on the bios supervisor password. now I need to use the bios settings to make some changes

  original title: supervisor password

  one of my pc has placed on the bios supervisor password. now I need to use the bios settings to make some changes, and I don't remember the password. What can I do to fix this?

  any practical advice will be much appreciated.

  Hello

  Check with support from the manufacturer of your system (manufacturer of motherboard for customized systems)
  or a real computer store (that makes its own domestic service).

  The Microsoft Community cannot help with password lost or forgotten by Microsoft Policy.

  Keep secure passwords - Microsoft strategy on move the passwords
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Crash computer after installing Netgear N600 Wireless Dual band Router WNDR3400. My detail of error says I may need to update my BIOS to 8400 has 09 but I can't seem to download the desktop to install.

  My computer crashes after I installed the Netgear N600 Wireless Dual band Router WNDR3400.   I uninstalled and then reinstalled, but my home computer still crashed.  My detail of error says I may need to update my BIOS to 8400 has 09 but I can't seem to download the desktop to install.  Any suggestion?

  Hi JudyWinn,

  If you need assistance for updating BIOS (Basic Input Output System), I recommend you contact the manufacturer of your computer to update the BIOS (Basic Input Output System) & check if the problem persists.

  Note: Changing the BIOS / chipset can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/chipset can be solved. Changes to settings are at your own risk.

  Hope the helps of information.
  Please post back and we do know.

• Need help with the bios password

  Hello! I need assistance with a bios password for my hp mini computer 1000. S/n is {content removed}

  Thank you! "

  Try the JAB.

  e9lof71ibz

  Third letter lowercase l.

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• Windows media player-Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings.

  I bougth Windows 7 starter, after the installation, I am unable to read the CD/DVD with media player. These messages continue to flow whenever I have CD/DVD slot...

  "Windows Media Player cannot play DVD video. You may need to adjust your Windows display settings. Open display in Control Panel settings, then trylower your screen resolution and color quality settings"I've adjusted manually, no solution, I had use microsolt auto FIX no way." Please help.

  Windows 7 Starter Edition or Basic... does not include a DVD decoder.

  As you can see in the following article... MS recommends
  upgrade to Windows 7 Home Premium, Ultimate or business.
  More features for you... more money for them...

  Info about DVD decoders: Plug-ins for Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

  It is possible that one of the following freeware
  media players would play your DVD:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.videolan.org/

  GOM Media Player
  http://download.CNET.com/GOM-media-player/3000-13632_4-10551786.HTML?tag=mncol;2

  Good luck...

• Windows media player cannot play the dvd video.might need to adjust the windows display settings

  Windows media player cannot play the dvd video.might need to adjust the windows display settings

  Hello

  1. Have you made changes on the computer before this problem?
  2. You get the error message?

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Open the troubleshooter in the Windows Media Player settings:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2:

  Install the latest version of codecs:
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Method 3:

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly