I need to implement Drag N Drop between two tables that saves the two records

Similar Questions

• Drag and Drop between 2 DataGrids

  I need to drag-and - drop between a series of data grids. However, when I drag from one to the other, he must not remove from the original, just make a copy. This may seem like an easy question, but I am a n00b and need help. Thank you!

  Visit this link, it's a very similar example: (with the list component and removes the element of the old list)
  http://livedocs.Adobe.com/Flex/3/HTML/Help.HTML?content=dragdrop_7.html

  check the destination component dragOver event. You can reject the trail and add a copy to your list or accept the drag and attach a copy of the source list.

• Cannot drag-and - drop between host and guest

  12 workstation

  Host = 10 Pro x 64 Windows

  Comments = 10 Pro x 64 Windows

  Everything is entirely up to date, etc. on a Z87 PC chipset.

  I can copy and paste. I can drag-and - drop comments to the host.

  I can't drag-and - drop between host and guest! lol I just get that bar circle icon.

  I'm totally stumped! I tried a myriad of common things...uninstalled/reinstalled VMWARE, then Tools, then even tried to create new guests. I do not have eccentric tweaks or customizations. It is a desktop PC that I use for a laboratory test and my business. I have no other problems in addition to this. Yet, on my other system, essentially a nearly identical configuration, I don't have this problem.

  Any suggestions?

  SOLUTION FOUND!

  The problem boils down to a matter of RUN AS ADMIN. On the HOST problem, it has been set to RUN as administrator. I've not done this! He has just installed that way automatically. Once I stopped that and it ran normally, all was well again. Read below for more details.

  I have two virtual HOST machine configurations almost identical - we'll we'll call HOST 1 and HOST 2. HOST 2 works perfectly without a problem. Drag and drop, to navigate to drives mapped to access NAS stored VMs, etc...

  I began to compare what was similar vs. different between the two. On HOST 1 (problem child even as I could slide properly - drop on), I noticed that I could not navigate to my NAS location where some virtual machines are stored. In the left navigation panel, the mapped drives would appear as drive letters with question marks next to them as you can see in the image below.

  

  I deleted the mapped drives then mapped them still fresh, did an other CLEAN uninstall VMWARE WS PRO 12. I combed the registry, records and checked for devices hidden in Device Manager. Clean as a whistle! I reinstalled 12 Workstation and returned the problem! I could yet drag-and - drop properly or navigate to mapped drives. Then I noticed the HOST 2 that he was not being RUN as administrator. Really? So, I removed this parameter and TA DA! Everything started to work properly. I don't know if it's a bug, or knowledge common to others but for me it was new. I don't know why, by default, when installing 1 HOST went down VMWARE to run as administrator, but it was.

  Bottom line - do not run VMWARE as an administrator.

• Drag and drop between screws

  I don't have much by using the drag and drop experience. I think using a tree control that appears in a sub VI with a list of channel names. I want to drag the name of the channel on an indicator on my main façade. There will be little code concerned after that to get the data of this channel in the indicator, which was chosen, but I don't know how to start the process of moving between the screws the Subvi with the tree control must have a structure of the event? Do I need a FG of operation between the two screws?

  Hi deskpilot,.

  Order the attached example. This should help you. Run the screw and try to drag in the drop-down list and drop into the VISA control

  Kind regards
  Amine31

  (Bravo to give good answers, mark it as a Solution If your problem is resolved)

• Need help with drag and drop

  IM really new to this program as a

  day new hehe and I need help. im making a game quiz and your supposed

  ED to score in the hoop with a circle.  I have the

  codes for the drag and drop for the circle, but I need help with the collision between the Hoop and the ball, I want to go to the image next or gotoandPlay when the ball touches the ring. HELP PLEASE

  You should not attach code to objects.  and you can be able to happen by using a loop.

  Start by removing all the code the suggested by maqro (i.e. as3) and by removing all the code attached to objects.

  use:

  {yourobject.onPress = function ()}

  this.startDrag ();

  }

  {yourobject.onRelease = yourobject.onReleaseOutside = function ()}

  this.stopDrag ();

  {if (this.) HitTest (whatever))}

  do something

  }

  }

• Drag and drop between applications using as3

  Giddayguys

  Research on features just drag-and - d├⌐poser of AS3 in the Air, specifically by dragging an AIR application data in an air application No.  You have no control over what happens to the data once the application without Air?  for example if I click on a datagrid control in the AIR and he copied the text in the column to the Clipboard and then I drag out of the AIR in, for example, Windows Notepad, can I paste data from the Clipboard by a fall?

  Thank you

  Wow, I thought flash.desktop was all the AIR, my mistake, thanks for the info as always kglad!

  And #8 is still correct, there is no simple interface air via drag and drop in another application. The main reason is that other applications will need to be programmed to the win32 message and know how to handle. Some applications may allow it, but you have to respect their API to accomplish this. Less do you a DONKEY win32, chances are that the simple answer to your question is no, this is not possible (for good reasons).

• Cannot add an audio Transition VIA Drag and Drop... Next in the classroom in a book.

  I work through Premier Pro classroom in a book, and I can add audio transitions in all the different ways they ask for.

  Default shortcut as well as through the sequence menu.

  I can't add a drag and drop any kind crossfade. Not between audio or at the beginning or end of the sequence.

  Y at - it a setting that I turned on to turn it off? It seems that since I'm following the examples of book and there was no mention of any weird behaviour that should not be the case.

  We tried a few things and looked in the forums, but nobody seems to have the same problem.

  Note:

  Running a Mac with El Capitan.

  Video transitions are drag and able to receive.

  Thank you

  OK I found it.

  Looks like I got accidentally audio transition default to 0.01 seconds time in the preferences panel.

  It is in fact a framework - but not a no-brainer.

• Can I drag and drop files from my Mac in the time Capsule to free up space on my Mac?

  I currently use my Time Capsule in sync with Time Machine as a return "where" upward... I would like to know if I can drag and drop files to transport CANADA to free up space on my Mac.

  I would like to know if I can drag and drop files to transport CANADA to free up space on my Mac.

  Yes, but the fact that you can do something does not suggest that it would be wise to do. Please take a minute to think about it per.

  If you delete files on your Mac for free space and move them to the TC... so that only one copy of these files you will be on the TC.  What will happen to the files when... not if... you have a problem with the TC?

  A plan much better, faster and more secure would be to add a USB to your Mac and move your files there. Then, Time Machine can back up your Mac and the USB attached to your Mac to the TC.  It would be a minimum backup... plan your files 'master' on the USB drive and 'backups' on the TC.

• Developer SQL 4.1.2.20 Build HAND-20, 64: cannot drag-and - drop in editor files include "#" in the name or the path

  Developer SQL 4.1.2.20 Build HAND-20, 64: I am not able to drag-and - drop a file from Windows Explorer into the SQL Developer Editor window if the name of the file or the path includes sharp «#» Unfortunately, my main directory structure contains a ' # ' in one parent folder names and I use drag-and - drop all the time... it is, I used to. :-)

  I am running Windows 7 Enterprise 64-bit with Service Pack 1

  It wasn't a problem in the previous version of SQL Developer 4.1.1.19 build HAND - 19.59.

  Thanks to study deeply and providing a repeatable test. It is a very strange edge cases.  Particularly interesting is...

  This same issue exists for JDeveloper Studio Edition Version 12.2.1.0.0

  After my tests in SQL Developer 4.1.2 the question seems to be, that say you, trying to open any file (I tried sql, xml, and pkb types) by drag-and - drop from Explorer Windows to a publisher of target opened on a XML file with a symbol of hash somewhere in the specification of the file it is.

  First of all, as a solution, I thought that I could recommend that you drag-and - drop since our view > files browser rather than Windows Explorer.  Which avoids the question and even you will descend on the Start Page tab, any worksheet or another editor must be opened before hand. However, there is a completely different problem with that: try to close the last tab of the XML Editor open blocking the entirety of the product.

  As you do not declare it against a release of the Early Adopter, where our team connect the bug, the standard procedure is so that you can open a service request with the support of the Oracle. My research did not turn any latest bug as this connected against SQL Developer or JDeveloper.

  Edit: In fact, just double click instead of using drag-and - drop from view > files avoids questions, name incorrect both hang at the end.

• 8 - Drag and Drop - Bounce Back answers that are out of sequence of Captivate

  Sorry if it's addressed somewhere, but my search results find anything. I'm building a drag and drop in which objects should be waived in order in various targets. I can get an object of bounce if it fell in the wrong place, but I also want the object to bounce back if it broke down (in the wrong order). For example, if point 2 fell in the right place, but in the wrong order, it will be returned. But I can't find an option for that. Any ideas? Thank you!

  I don't think there's a way to get there. Only drag sources that cannot be accepted by a drop target can be bounced. But with the sequence, the drag source must be accepted even if it is not in the correct order.

• Sharing folders, drag and drop, copy and paste that NONE works!

  I got 6.5 VMware workstation installed about 3 weeks now and I think my wife think me crazy for buying the license last night due to the fact that he has several features that simply do not work.

  Now I ask anyone with knowledge of this product for shut up here and explain it.  The instructions are not difficult to understand, and no reason I can think to copy and paste them here since the help files.

  I will say this however.  I am running windows XP pro host and Vmware with Linux Red Hat Fedora 10 as the guest OS.  I'll probably install XP on it in a day or two to see how it works.  Long user VPC time here to try VMWARE first at the time I also tried connectix VPC and choose to keep the VPC then as the top program.  It is quite obvious that VMware is the best of both in its current phase, but how in the world can you expect from ourselves to a program that does not work in some critical areas.

  Is anyone else out there there's this version 6.5 installed and if yes can actually use you files shared?  Someone there itstalled with XP and Linux Guest host?

  Any one that can have drag and drop?  Copy and paste work?  Anyone with shared working folders?

  Anyone?

  15 + years here making advanced computer repair and management of small groups of private programmers and even if I'm not him the brightest star in the sky, I think that if these features worked I could do it, but they simply do not have.

  I have a bum facility or what?

  Charlie Swindall

  Clintwood is GOING

  276-926-6423.

  In order to get drag / move to work trying to start vmware-user from a console.

  I noticed that vmware - the user does not seem to start on RPM based distributions.  I saw this on Suse 11.1, F10 and Centos 5.2.  It starts automatically on debian (lenny) and kubunto at least here.

  Jeff

• Set point problem selected in the drop-down list box that is the XML data provider

  HI - new to Flex, experienced Java dev., hoping someone can help me see the light of what should be easy but...
  
  I have a Flex 3 MXML application form that contains a ComboBox as follows:
  < mx:ComboBox id = "physRegion" editable = dataProvider = "{regionRequest.lastResult.region 'false'}" / > "
  
  The combo box is filled by the provider of data like:
  MX:HTTPService id = "regionRequest" url = "flexDAOServlet" resultFormat = "e4x" method = "POST" >
  < / mx:HTTPService >
  
  and the underlying XML code looks like this:
  <>region
  Northland < label > < / label >
  < value > 1 < / value >
  < / region >
  <>region
  Auckland < label > < / label >
  < value > 2 < / value >
  < / region >
  ...
  
  Drop-down list box loads the XML code very well. the user can select an item and the appropriate value is submitted to the server without problem. My problem is when I want to "recharge" the form with previous values.
  I can reload the text without problem fields.
  
  But I can't work in my ActionScript function, how to set the combo box so that it displays "Auckland" for example, the element with the value = 2. I'll be back this server id, even if I could get the XML code or label if that would help me solve this problem.
  
  I tried physRegion.selectedItem = "Auckland" - nope. "
  I tried physRegion.selectedItem = 2 - nope.
  I tried
  var XML = myXML:XML ("< region > < label > Auckland < /label > < value_2 > < value > < / region >");
  physRegion.selectedItem = myXML;
  and - nope.
  
  I know that I'm a new style user here error (and thank you for reading this far! your patience is appreciated) but I can't for the life of me see what it is. Can anyone help?
  
  Many thanks in advance for clues. Apart from that, I'm loving Flex.
  Kind regards
  Adrian

  Two things to note. The only problem with the function that has provided ChiefRocka00 is that it is based on the identifier of the data, which means your always limited to have that be the identifier of your value. Personally, I'll be back queries a lot of times where the labelFIeld and dataField aren't labels / data pairs a suggestion would be to add a third parameter and have it checked for this identifier instead of the data. The other thing to note is that it is more common to use selectedIndex instead of selectedItem. If you do not want to do something more like physRegion.selectedIndex = selectCboIndexByData ("physRegion, ' Auckland", label) by using the update function of

  public void selectCboIndexByData(theCbo,_theDataValue,_identifier:String):Number {}
  for (var i: Number = 0; i< thecbo.dataprovider.length;="">
  If (theCbo.DataProvider.getItemAt (i) [ID] == theDataValue) {}
  Return i;
  }
  }
  return 0;
  }

• NEAT SQL - time scale between two records to find...

  Hello everyone, first of all please let me apologize because it's a fundamental issue, however my sql is nowhere near as good as my design skills and I'm having a headache with something...
  
  In simple terms, I have a table which we will call "TBL_MOVEMENTS".
  
  In this table, we record the time several doors open and close. So we have the passes "DT" (Datetime in timestamp), 'DOORID' and 'STATE '.
  
  For the sake of examples, we will say that we want to select the hours each door was open for. (actually every door will open and close hundreds of times)
  
  The data in the table would present a little as follows...
  
  DT DOORID STATE
  ----------------------------------------------------------------------------------------
  2010-01-15 09:00:01.223 OPEN A3
  2010-01-15 09:02:04.789 OPEN A1
  2010-01-15 09:07:55.123 NARROW A3
  2010-01-15 09:08:12.654 NARROW A1
  
  
  In English the logic I would attempt in the direction of
  
  Select the doorid and the timedifference between each open event and the very next event close to the same door.
  
  If anyone can help I would be very grateful!

  Hi and welcome to the forum!

  You are looking for something like this?

  SQL> WITH door_events AS
    2  (
    3          SELECT TO_TIMESTAMP('2010-01-15 09:00:01.223','YYYY-MM-DD HH24:MI:SS.FF3') AS DT, 'A3' AS DOORID, 'OPEN' AS STATE FROM DUAL UNION ALL
    4          SELECT TO_TIMESTAMP('2010-01-15 09:02:04.789','YYYY-MM-DD HH24:MI:SS.FF3') AS DT, 'A1' AS DOORID, 'OPEN' AS STATE FROM DUAL UNION ALL
    5          SELECT TO_TIMESTAMP('2010-01-15 09:07:55.123','YYYY-MM-DD HH24:MI:SS.FF3') AS DT, 'A3' AS DOORID, 'CLOSE' AS STATE FROM DUAL UNION ALL
    6          SELECT TO_TIMESTAMP('2010-01-15 09:08:12.654','YYYY-MM-DD HH24:MI:SS.FF3') AS DT, 'A1' AS DOORID, 'CLOSE' AS STATE FROM DUAL
    7  )
    8  SELECT  DOORID
    9  ,       DT              AS DT_OPENED
   10  ,       DT_CLOSED
   11  ,       DT_CLOSED - DT  AS DURATION
   12  FROM
   13  (
   14          SELECT  DOORID
   15          ,       DT
   16          ,       LEAD(DT) OVER (PARTITION BY DOORID ORDER BY DT) AS DT_CLOSED
   17          FROM    DOOR_EVENTS
   18  )
   19  WHERE   DT_CLOSED IS NOT NULL
   20  ORDER BY 1
   21
  SQL> /
  
  DO DT_OPENED                      DT_CLOSED                      DURATION
  -- ------------------------------ ------------------------------ ------------------------------
  A1 2010-01-15 09:02:04.789        2010-01-15 09:08:12.654        +000000000 00:06:07.865000000
  A3 2010-01-15 09:00:01.223        2010-01-15 09:07:55.123        +000000000 00:07:53.900000000
  

  Published by: Centinul on January 15, 2010 14:46

  The minor error.

• Need help with virtual shelf - drag and drop between components?

  Hello

  Im trying to create a virtual shelf, where book spines are clips of individual video that can be dragged and re-ordered on the set.  For the moment I can drag the thorns to a target affected, but not just any target or "nudge" the position of other books along.

  I'm sorry that if that's a little vague I'm not experienced in as3, please do not hesitate to ask any questions and I'll do my best to answer.  IM thinking that a table is necessary which occupies the posts, but I'm not sure how to put it all together!

  Any help is greatly appreciated! The code I have so far is:

  import flash.events.MouseEvent;
  import flash.display.MovieClip;

  var dragArray:Array = [red, blue, green, purple, yellow];
  var matchArray:Array is [target1, target2, target3, target4, target5];.

  var currentClip:MovieClip;
  var startX:Number;
  var startY: number;

  for (var i: int = 0; i < dragArray.length; i ++) {}
  dragArray [i] .buttonMode = true;
  dragArray [i] .addEventListener (MouseEvent.MOUSE_DOWN, item_onMouseDown);
  matchArray [i] .alpha = 0.2;
  }

  function item_onMouseDown(event:MouseEvent):void {}
  currentClip = MovieClip (event.currentTarget);
  startX = currentClip.x;
  startY = currentClip.y;
  addChild (currentClip); bring to front
  currentClip.startDrag ();
  stage.addEventListener (MouseEvent.MOUSE_UP, stage_onMouseUp);
  }

  function stage_onMouseUp(event:MouseEvent):void {}
  stage.removeEventListener (MouseEvent.MOUSE_UP, stage_onMouseUp);
  currentClip.stopDrag ();
  var int index = dragArray.indexOf (currentClip);
  var matchClip:MovieClip = MovieClip (matchArray [index]);
  If (matchClip.hitTestPoint (currentClip.x, currentClip.y, true)) {}
  a match was found. Position the clip on the corresponding clip:
  currentClip.x = matchClip.x;
  currentClip.y = matchClip.y;
  make not draggable:
  currentClip.removeEventListener (MouseEvent.MOUSE_DOWN, item_onMouseDown);
  currentClip.buttonMode = false;
  } else {}
  football match has not, so send the clip to the back where he began:
  currentClip.x = startX;
  currentClip.y = startY;
  }
  }

  Yes, you can double click on activate your movieclips and assign the function double click listeners who use navigateToURL

  dragArray [0] .doubleClickEnabled = true;

  dragArray [0] .addEventListener (MouseEvent.DOUBLE_CLICK, f);

  function f(e:Event):void {}

  navigateToURL (new URLRequest ("http://www.adobe.com"));

  }

• Cannot drag and drop between OSX and OSX VM

  Fusion 5.03

  10.8.4 OSX patch entirely on the virtual machine and the host.

  I'm just trying to drag a file 397KO from the desktop of the host to the desktop of the virtual machine

  I have the drag and it snaps back on the desktop of the host.

  I uninstalled and reinstalled the VMWare Tools in the virtual machine.

  I have also uninstalelled and then rebooted and then installed and restarted with no luck.

  I also rebooted the host as well.

  It was originally a Lion install where tools were installed and then upgraded to level to Mountain Lion and then patches.

  I guess it's probably something simple I'm missing.

  Thanks for the help

  Josh

  When in doubt, read the documentation!   Take a look on: create an OS X Server, VMware Fusion Virtual Machine