I need to install the SP1 for Vista, but get message at the stage of installing "updates are not configured correctly. Change back '

Similar Questions

• When I reboot after installation of service pack 2, the message comes out and says that updates are not configured correctly, returning from changes

  When I reboot after installation of service pack 2 on a computer laptop with Windows Vista Home Premium 32-bit Dell XPS M1530, the message comes out and says that updates are not configured correctly, returning from changes. Do not turn off your computer. I installed update readiness tool, but it does still every time. I tried to disable the antivirus software prior to installation.

  Hello
   
   
   
  1. how you try to install Service Pack 2?
  2. are you able to boot to the desktop?

   

   
  Method:
  Step 1: If you are able to start the computer in normal mode, then try a clean boot.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135
  Please note: after troubleshooting, start the computer in normal mode.

   
  Step 2: Try to install Service Pack 2 manually.
  http://www.Microsoft.com/en-us/download/default.aspx
   
  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791
  
   
   
  If you are unable to start the computer, then you can follow this link to start the computer in safe mode.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   
   
   

   

  If you are unable to install Service pack 2, you can consult this article.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

  Please note: method 2 refers about upgrade on site.  Perform a repair installation/place will not damage files and applications that are currently installed on your computer.   However, I suggest you to back up all important data on the computer before you perform the upgrade on the spot.

   

   

   

   
   
   
   

• Try to use Windows Update to install 2 updates, get "updates are not configured correctly. Restoration of the changes

  Try to use Windows Update to install 2 updates (Windows Internet Explorer 9 for Windows Vista) and an a security update Cumulative for Internet Explorer 8 for Windows Vista KB253048. It's on a laptop at home unique stand alone, works with Windows Vista Home Premium SP2.

  Windows Update initially reported two updates correctly installed and asks me to restart the PC, what I'm doing. Before the connection at the reboot prompt, I get a message saying "updates are not configured correctly. Restoration of the changes. It is the next messages saying: step 1/2/3 of 3 0% complete.
  After I then connect I get the message ' Windows to not install important updates.

  Update history reveals the KB253048 cannot install (error 80070005), but IE9 installed successfully. However when click on the IE icon and run Internet Explorer version 8 of Internet Explorer, I get, not version 9.

  I tried to do this several times on 2 days, but get same problem.

  This gives a shot.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself.

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) via Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of Norton 360 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately!
  
  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. IMPORTANT - DON'T SKIP THIS STEP! Open Internet Explorer, to http://support.microsoft.com/kb/971058 of => & run who fix it in methods AGGRESSIVE then by DEFAULT. [1]

  10. restart one last & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  =======================================
  WARNING: MS MVPs represent or work for Microsoft
  http://MVP.support.Microsoft.com/GP/mvpfaqs

• Updates defective installation as computer repeatedly sending message: "changes in the restoration. Updates are not configured correctly "." What should I do?

  Faulty installation of update as a computer several times to send the following message: "changes in the restoration. Updates are not configured correctly "." What should I do?

  Hi NickGodin,

  You can try these steps and see if it helps.

  Step 1:

  If you are unable to boot into normal mode, you can read the following article and try the steps to run the system restore.

  An update is not installed successfully when you try to install the update in Windows Vista and Windows 7

  Step 2: When you are in normal view, you can see the history of update to discover the update has failed as a result of the article:

  See the Windows updates are installed

  Step 3:

  You can also try to download and install the stand-alone package with updates from the Microsoft Download Center.

  a. to download updates from the Microsoft Download Center

  b. Enter the item number in the field search and download the same.

  c. double-click on the downloaded file.

  d. click on run and follow the wizard to install it.

  Hope this information is useful.

• Windows Vista: updates are not configured correctly, returning from changes

  my computer may not be updated, whenever I turn on or restart my computer, the message "Configuring updates stage 3 of 3 0% Please wait, don't turn off your computer" comes but after awhile, it says 'updates are not configured correctly, returning from changes' it keeps past, I did everything I could , but nothing happened. What should I do?

  So far there are problems or there are many who have this problem?

  Have you tried to disable temporarily running anti-virus software?

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  950093 how to use the System Configuration utility to resolve configuration errors in Windows Vista
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 950093

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058/#appliesTo

  Troubleshooting in Win 7 vs KB971058 for Vista
  http://social.technet.Microsoft.com/forums/en/w7itproappcompat/thread/e1f0a807-E132-4FDC-ABF8-5bad87b64204

  The system update tool

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

• Vista updates are not configured correctly. Reverting changes... runs through it

  Vista has 13 downloaded updates, but will not install them correctly. any ideas? He just continues loop me through the installation procedure.

  Hi JWThomas,

  You can try these steps and see if it helps.

  Method 1:

  You can read the following article and try the steps.

  An update is not installed successfully when you try to install the update in Windows Vista and Windows 7

  Method 2:

  Once you're in normal mode, try to install an update at a time to check that one is causing a problem.

  For more information, you can consult the following article:

  See the Windows updates are installed

  Problems with installing updates

  Hope this information is useful.

• Updates are not configured correctly. Restoration of the changes. Do not turn off your computer.

  Am unable to get windows to start, get this message over and over again.  I tried restoring the system on CD in the previous point but did not work. Would appreciate any help.  Thank you

  Try a startup repair if you have the Vista DVD.

  If no DVD of Vista, try this:

  Download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Lack MSVCP110.dll Adobe Premiere Elements on 10 is needed after installed update. Impossible to correct the problem after reinstalling, deleting and reinstalling.

  How can I fix missing MSVCP110.dll Adobe Premiere Elements on win 10 after installed update. Impossible to correct the problem after reinstalling, deleting and reinstalling.

  Hello

  Please visit https://helpx.adobe.com/creative-cloud/kb/missing-msvcp110dll.html

  Hope that helps!

  Kind regards

  Sheena

• Not receive updates for Vista and get message WindowsUpdate_80070422

  Continue to be WindowsUpdate_80070422 message when checking for updates. Entered servises and windows update to change automatically, as it was on automatic (delayed start). Applied, but I cannot click on start on the status of the service. If anyone can help?

  Please answer each of the following [admittedly tedious] diagnostic questions in a list numbered corresponding type in your very next answer, preferably without quote my post:

  1. when (date about) have you buy the computer?

  1B. is this a Vista 32-bit or a 64-bit computer?  See http://support.microsoft.com/kb/827218

  c. 1, which manufactured the computer (for example, Dell;) HP; Lenovo; Toshiba)?

  have 1. you ever had the opportunity to do a repair installation or a clean installation of Windows Vista?

  2. What is the full name of your application or the installed antivirus security suite and when (date about) is your subscription current expires? What (other than Defender) anti-spyware applications are installed? What third-party firewall (if applicable)?

  3 a Norton or McAfee application ALREADY installed on the computer as you bought?

  4. do you have a free trial Norton, or a test of free McAfee [a] come preinstalled on the computer When you bought it? (No matter if you have never used or activated).

  5 KB3154070, KB3158991, KB3156013, KB3156016, KB3156019, KB3155178, KB3141083, KB3153171, KB3153199, KB3156017, and/or KB3142023 listed in installed updates (not update history)? [1]

  6 assuming that Java is installed => is 91 update Java Version 8 (or higher) installed? TEST HERE in USING INTERNET EXPLORER ONLY! -online http://java.com/en/download/uninstallapplet.jsp [2]

  • Java Update: the Patch or pitch it
    http://krebsonsecurity.com/2014/07/Java-Update-patch-it-or-pitch-it/
  • It's time to disable/uninstall Java?
    http://securitygarden.blogspot.com/2013/01/Java-zero-day-again-time-to.html

  7 is Adobe Flash Player v22.0.0.192 (or higher) installed? TEST HERE in USING INTERNET EXPLORER ONLY! -online http://www.adobe.com/software/flash/about/

  8. What number of Update Version & KB are displayed in the second line of text using IE9. [Alt + H + A] tab. for example, Updated Version: 9.0.54 (KB9876543) ?

  9 is Firefox version 47 (or higher) or Google Chrome 49.0.2623.112 [sic] or any other alternative browser installed?

  10. are you familiar with "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; RegClean Pro. Advanced SystemCare. Comprehensive care system; Glary Utilities; Registry Booster; McAfee QuickClean; Own fast AVG; AVG PC TuneUp; Norton Registry Cleaner; Norton PC tune-up; PCTools optimizer; SpeedUpMyPC; FixMyPC; PC Doctor; TuneUp Utilities; WinMaximizer; WinSweeper; Comodo System Cleaner. Advanced System Optimizer. Registry Cleaner CCleaner component)?

  ===============================================
  [1] start | Control Panel | Programs and features. See installed updates (in the left menu)

  [2] no need to install Java if it isn't already installed.

• Installed updates are not displayed in the functions of the program

  I apply MS Updates regularly and don't have some exceptional outside two optional updates that do not install updates. However, when I Visit > program features > view installed updates no updates installed are displayed many updates are missing, including any for Vista. The freeware Software Inspector for Windows product displays updates as it is correctly installed! I ran the difficulty it utility provided by Microsoft with no joy. Any ideas?

  Dell Inspiron 530; Vista Home Premium SP2

  I think that a clean install would be better here, too. I assumed that the data on the D: drive would be preserved, Yes, but better check with Dell Support for more guidance.

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". " http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista (or contact Dell technical support)

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: The McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool products McAfee Consumer before you install updates, Windows Service Packs or IE upgrades and before installing your new antivirus application (for example, Microsoft Security Essentials; free).

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• received update for net framework 3.5service pack 1 and net framework 3.5 family update [kb951847] x 86 for about 2 months. my computer keeps trying to install it. He returned saying updates were not configured correctly. returning from changes.

  updates will not be installed on the computer

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the correct help it.

  See you soon.

  Mick Murphy - Microsoft partner

• AFTER THE DOWNLOAD AND INSTALLATION OF WINDOWS, ILS UPDATES BEGIN TO SET UP, AFTER I READ UPDATES WERE NOT CONFIGURED CORRECTLY. RESTORATION OF THE CHANGES. NOT PUT OFF THE COMPUTER.

  RECENTLY RE INITIALIZED HARD DRIVE.

  You don't say if it goes back to run correctly, or you are caught in a loop.

  Read this info:

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not solve the problem;

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• The service "wuauserv" (automatic updates) does not work correctly

  The service 'wuauserv' uses constantly between 88 and 95% of my CPU, slowing down my computer to the point that it is almost unusable, so I've been suspending or disabling the process 'wuauserv' every time I use my computer.

  In addition, Windows Update does not, if "wuauserv" is suspended or not.
  It prevents just check the latest updates and never stops to do that no matter how long wait.

  Well, I managed to solve the problem.

  I followed the instructions on this page: http://workingscripts.blogspot.com/2008/05/windows-update-high-cpu-usage-fix.html

  Immediately after that, Windows Update and the automatic updates service finally started working again. It has been almost two weeks since I fixed it and have not had a problem since.

  I didn't format the hard drive and do a clean install of Windows XP for this problem - I have never done this because it does not seem necessary.

  And I do not see how this relatively recent automatic updates problem never touched my other problem Installation of Internet Explorer years discussed in my other thread.

• Tabs at the beginning of the lines of a paragraph are not displayed correctly

  This only happens when you have your cursor at the beginning of the lines that are not the first line of a paragraph.  When you press the tab key, it seems that the model is changing, but the UI is not updated with the change.  So, if you change anywhere in the first line of the paragraph that you can see the tabs you entered are displayed.

  Here's a video of what I see in my application, but also the demo application http://screencast.com/t/NTViNjRhNzgt

  You are right. This is a bug which should be addressed in a future version of the player.

• Successfully installed SP1 for Vista, but it does appear in the properties of the computer

  I recently had to reinstall Windows and start over with my old computer. I did all the updates except for Service Pack 1 and Service Pack 2.  I've installed Windows Vista SP 1 several times using Windows update.  When it's over, he says that have successfully downloaded.  If I run Windows Update again, it then lists it as an important update.  I tried to restart, and the same thing happens every time.  It still downloads successfully, but appears when I right click on "Computer" and look at what version of Windows I have ever.  I need these updates to update other software that was initially loaded on my computer in 2007 when I got it.

  Hello

  Please follow the steps below.

  Method 1:

  (a) open Windows Update by clicking the Start button, all programs, and then Windows Update.

  (b) in the left pane, click view update history. Search for the error message.

  Method 2:

  Step 1: Put the computer to boot and then try to install the update.

  See the link.

  http://support.Microsoft.com/kb/929135

  NOTE: after you install the update successfully, return to the computer to start as usual (see step 7 link mentioned above)

  Step 2:

  Follow the steps in the link.

  http://support.Microsoft.com/kb/947366