I need to know exactly what programs you will need to start up

Similar Questions

• Error "windows cannot open this file. to open this file, windows needs to know what program you want to use to open it"appears just after the start on its own.

  After that I typed my password at startup, windows can not open this file. to open this file, windows needs to know what program you want to use to open it.  At this point, I have no one based on nothing and and messages appear literally on its own. I think it's done my computer very slow also.

  What can I do to fix this?

  It's a site file

  Hi Jose7777777,

  • What version of Windows are you using?
  • How long have you been faced with this problem?
  • Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  You can also view the startup folder.

  I hope this helps.

• I have an older model hp dx5150 mt, I want to know exactly what kind of ram I need, I got 4 slots for ram?

  I just want to know exactly what kind of ram will be my hp dx5150 desktop will manage and take, as I know its ddr and that this model will have up to 4gigs of ram, what I don't know is, is he pc2100, pc2700, pc3200, etc... etc... Please help

  Use the scan memory automated by Crucial. Just click HERE. Download and run the file. A Web page opens in your scanning system. It then displays the results to the type of ram you need and how your system supports. Looks like you can handle up to 4 GB but, run the scan. A 64-bit operating system would probably increase the limit of 4 GB. For example, you might want Windows 7 Pro x 64.

• I am very new to dream. I created a simple site that worked very well. I tried SEO booster and was checking on things different (for example Goigle webmaster). I don't know exactly what I did, but now when I type in my site it says the Palestinian Authori

  I am very new to dream. I created a simple site that worked very well. I tried SEO booster and was checking on things different (for example Goigle webmaster). I don't know exactly what I did, but now when I type in my site it tells me that the page cannot be opened because it was redirected too many times...? Help, please!

  Let me add some details to the choice in the scenarios you have for the use of domains.

  The areas are to simplify all kinds of activities on the Internet for users. Instead of addressing your email to go to the software from e-mail server to a computer with the IP 113.78.59.238 number, users can simply run their mail to "hannah" @ "gmail.com" or go to the website to "gildedgraces.com". This makes things a lot easier for users, but requires a little more difficult techniques backstage, because Internet computers connected and hardware (servers, tablets, phones, refrigerators) have only single numbers, not names. So, how internet needs to know which computer manages all emails for "@gildedgraces.com", and where physically this site 'www.gildedgraces.com '? This is where the "Domain Name Servers" kick in. They maintain long lists of these domain names, with references to the IP numbers correct and up-to-date. In this way, technicians can also easily Exchange computers, servers, connections, where a site is moved to another host, or when a server suddenly collapses. These things will happen, things have to change. They want to update certain IP numbers in the list on the DNS servers. I have it?

  So in order to get a Web site running, you know where your domain registry database is guarded and kept safe, and where your Web site is physically located.

  Note the difference between DNS (or servers) and the service (or Web servers) throughout all the instructions and documentation.

  Now, have a look at this PDF that was returned by Brad, in his response above.

  The domain name can be registered at any domain provider and the registry itself is not always need to reside there. You could relegate (you might say "move" or move) the registry for the DNS to another provider (like BC) service. In such a scenario, he must tell the provider holding the credentials of your registry, to redelegate it in British Colombia. That's what the article 4 in the PDF file. And of course, BC DNS service can internally so all applications for this field to their own web server.

  You can also choose to keep your current domain provider maintains the registry, but that their DNS servers before any request of this area on the web servers of British Colombia, where your site is published. This is typically a necessity for registrations from non-American, since many extensions of national domains (such as .nl and .de) can be recorded by suppliers outside of this nation. So the registry simply cannot be moved to an American company (it's a legal thing). In such a situation, article 6 of the PDF comes into play, describing what BC would normally internally: to the domains of the physical location of the Web site.

• Get the prompt: what program you want to open it with? When to open the web browser

  When I try to open my browser (or any other program), he asks 'what program you want to open with' and gives me a list. What is with that? I have just got rid of "xp security 2012" if it means something... or am I...?

  Hi Leoboutilieri,

  have been closely following this:
  How to get rid of malware?
  Otherwise, carefully follow
  Let me know if it helps
  Elvis

• When opening a program, such as system restore, it asks what program you want to open this program with ie adobe, yahoo, internet Explorer

  When you open a program, such as the system restore or turbo tax it always ask what program you want to open this program with a list of options such as the Adobe reader, internet explorer, yahoo Messenger, etc..

  is there any solution for this?

  Hello

  The issue seems to be with the file association so corrupt that I suggest you run the fix it or follow the manual procedure provided in the link below to fix the problem.

  http://support.Microsoft.com/kb/950505

• By clicking on any shortcut prompt "what program you want to open (progrem.exe) with? dialog box.

  Hello
  I'm stumped on this one. Whenever you launch any program on the start menu, the command open, run box, the "program would you like to open (progrem.exe) with? appears, example by clicking the shortcut of internet Explorer, invites "which program you would like to open iexplore.exe with? It looks like a file association error but cannot find a list.
  Help

  Hello midryder

  Go here

  12 straight line

  Save the REG file to your hard drive. Double click it and answer Yes to the import prompt.

  .

• WHAT programs can be eliminated safely start?

  I am trying to remove autostart programs; to speed up boot [and free up RAM?]

  many forums tell me how to get to the list of programs that load at startup.  no forum I can find tells me WHAT programs can be eliminated at the start.  program names are not intuitive

  Enter them here. See what he says

• -Pop-up menu (allows you to choose what program you use to open the file) when you insert sim or cd does not appear

  When a disk or sim card or data storage device is connected to the computer there should be a menu pop up that allows you to choose which program to use to open the file. This is no longer the case. Any ideas how to restore it?

  Hi John,.

  1 are you referring to AutoPlay settings in Windows XP?

  2. did you of recent changes on the system?

  If you are referring to AutoPlay settings in Windows XP, you can see the following article in Windows XP to enable the feature.

  The Autorun feature or the AutoPlay feature does not work when you insert a CD-ROM into the CD drive

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  You can also consult the following article:

  How to change or choose the program that starts when you double-click a file in Windows XP

• How to know exactly what part of a query is running?

  Hi guys,.
  
  I use the following query to see what queries are running
  

  SELECT
  a.sid, a.USERNAME, a.STATUS, b.sql_text
  FROM V$SESSION a INNER JOIN V$SQLAREA b
  ON a.SQL_ADDRESS= b.ADDRESS; 

  However, it is possible to get a further breakdown of the request? that is to say see what part of the explain plan command is actually done?
  
  Thank you

  Would you explain to a specific SID command.

  "accept Vside guest ' SID value enter:"
  rowset 132 off veri
  Col object_name form a34
  operation collar shape a45
  Select-lpad(' ',depth+1), rpad (' ', 132,'... |'))
  || operation | » '|| options of | ' '|| decode (depth, 0,' optimizer Mode ='| optimizer,' ') operation.
  object_name, cardinality, bytes, cost-, partition_start, partition_stop
  v $ sql_plan where hash_value = (select sql_hash_value in the session $ v where sid = & Vside)
  order by ID
  /

• Cannot open e-mail messages. MSG, it's that there is no program associated with this file and define and association. Have no clue as to how or what program choose. Thank you jp__

  problem is email

  I assume you are talking about email attachments.  Each attachment has a three-character extension that associates the file with a program (in the start menu / default of programs / associate a file or Protocol with a program and then scroll through the list for the three-character extension).  Many are well known (.doc for Word Documents) and .pdf for Adobe Reader documents, but some are not so well known.  Some are also used by several different programs is sometimes important to know what program created the file in order to know what program to associate with her.  Your best bet since it is emails is to ask the sender to you say the name and version of the program so that you can install a program that can at least find out if is not working with the file if you do not recognize the extension.  Some attachments to e-mail are not intended to be read and there are programmatic reasons and must not be opened (but I can't give you a list of all of them - barely know they exist).

  Sometimes you can google the extension (for example, google .avi http://www.afterdawn.com/glossary/terms/avi.cfm) and a link arises which will tell you what programs can do the file type and which programs can read or work with the file type (or you may need to go to other links to get this reversal - in this case a lot of programs can open the file because it is a very common file for which many different programs have been developed - program that it becomes irrelelevant).  If it's a single program, so you know what you need.  If more than one program, you must the sender to tell what program you used to create the file unless the .avi file that can be read by the host (or you can guess or try different options until you find one that works but this can take a long time, can damage the open file with wrong program and can be expensive if you buy one of the programs that you are testing).

  In fact you do not define an association.  When you install the program, the extensions it can handle are identified by the Setup program and included in the listing file associations.  In fact, there is no way to add an extension to the registration of the association - you can change the programs that are used by the extensions in the list by default.  Some extensions are added automatically by Vista when installed and work a little differently than others (for example, .lnk or .exe), but we don't need to go into that, unless the extension you are having problems with is one of those (you don't mention the extension so I can't give you advice).

  I hope this helps.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• my C drive is full, how do I know what programs can I remove?

  I know that you can remove some programs, but how do I know what ones I can remove without affecting my computer?

  I know that you can remove some programs, but how do I know what ones I can remove without affecting my computer?

  We cannot comment on what programs you need to remove. In addition, some programs running in the background and removing will raise questions.

  However, you can uninstall programs that have been installed by you. You can go to start-> programs and features-> press enter type. Search for programs that have been installed by you, select them and click on uninstall, individually.
  Once uninstalled, you can install another drive as the installation location.
  But, before you uninstall, go on-> do work right click on the C partition :\-> click Properties. In the Properties dialog box, click Disk Cleanup. In the Disk Cleanup dialog box, click clean up system files. And then click Ok. This will clean the junk files.

• My programs take me to "what program do you use to run this."

  I just got rid of a virus with Norton 360. But now when I want to open anything it goes to a page asking you "what program you want to run it with ' and my options are internet explorer, adobe or Photoshop? I don't understand. That's happened?

  Hi Mike,.

  Thanks for posting the request in the Microsoft community. It seems that you are faced with the question with the file association.

  I suggest you to refer to the articles and check if it helps:

  Change the programs that Windows uses by default

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

  Change default programs using Set Program Access and computer defaults

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-default-programs-using-set-program-access-and-computer-defaults

  If the problem is not resolved, please respond with more details and we will be happy to help you.

  Thank you.

• Don't know what program to buy?

  I want to take old photographs that have been scanned ito my computer and put it in a book I am writing.  But I want to have pictures with faded edges, so they blend in with the text.  What program Adobe will fade the edges of photos?

  Thank you

  Bob

  What program Adobe will fade the edges of photos?

  Both Photoshop and Photoshop Elements.

  Photoshop is that these days of subscription.

  Start with Photoshop Elements that you can buy for under $ 100. The ride. You find a bargain in a store.

  How to soften the edges of a Photo in Photoshop Elements - YouTube

  You can download and run a free trial for 30 days. After that, you must buy it.

  Download Photoshop Elements free trial | Adobe Photoshop Elements

• Exactly what ports are used to communicate with a cRIO?

  Can you provide this information (or point me to it). I want to implement a cRIO remotely through the internet, and I put it behind a firewall. I would like to know exactly what ports need to be forwarded to allow MAX to connect (when I say that it connects directly to a URL).

  Thank you

  Chris

  Chris

  Show This Article in the Knowledge Base that software ports OR use. Please refer to the Kb for more details.

  The cRIO, guests using

  44525 (discovery of target device Ethernet)

  3079 (front of LabVIEW RT TCP connections)

  3580 (OR Locator Service)

  80 (LabVIEW Web server)

  96 (FPGA compile server)

  (3537 if using VISA)

  (81 if you use Internet toolkit)

  (20 and 21 If you use FTP server).

  What are the Ports I need to open on my Firewall for National Instruments software products?