I need to restore windows windows vista no disk.

Similar Questions

• I believe that when I had my computer reset Windows Vista has been removed from the system due to my computer with a virus. Now, I need to know how can I do to restore Windows Vista in my system?

  I need help restoring Windows Vista on my computer.  Please help this is finals week and I need my computer to take my final.

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to make the recovery disk/s since the Partition of recovery in case of hard drive failure or System Crash when you're back running.

  They will tell you how to do this.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Restored for laptop, need to activate Windows Vista product key on the laptop is unreadable

  My computer has been recently completely reset and now I need to activate windows vista again. In order to obtain a sustainable version of vista that I need a product key, however, the bottom of my laptop product key has some unreadable letters/numbers. What can I do about it?

  Hello

  I suggest that you contact the manufacturer of your computer and the recovery order discs form their

  need you normally not a product key to install

  ask them about it

• Need to download Windows Vista Premium Home Edition

  I had to erase my laptop and now I have re - install everything.  I have Acer Aspire 5100 restore counter but nd disk is bad.  So now that I need to download Windows Vista Premium Home Edition - I have the product number.  I try to complete this Christmas Eve.  I'll give this laptop to my grandson.  So, I wanted to start all over again and had to get my data out of the laptop.

  I had to erase my laptop and now I have re - install everything.  I have Acer Aspire 5100 restore counter but nd disk is bad.  So now that I need to download Windows Vista Premium Home Edition - I have the product number.  I try to complete this Christmas Eve.  I'll give this laptop to my grandson.  So, I wanted to start all over again and had to get my data out of the laptop.

  Hey mklafert

  Sorry for the eve of Christmas, but there is no legal or free vista doesn't download only internet pirated versions that you would not want t for a gift

  I suggest that you contact acer and ask them to send you a set of disks of replacement for recovery of the acer link below but it will take time

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

  But if you can borrow a microsoft dvd vista not acer hewlett-packard or the like discs of recovery of a friend or relative you might try to install vista in this way using your product outside of the laptop case key to install the family version correct vista premium of the dvd, and then go to acer and get the right drivers for your computer laptop model number

  Just make sure you get the good dvd vista

  There are two microsoft vista DVD produced is 32-bit and the other is 64-bit

  most of the computers came with 32 bit installed unless he asked a 64-bit

  and if you happen to also have a recovery on your computer partition acer laptop, you can start the recovery to factory standards by pressing Alt + F10 at startup

  There used to be a password you need to enter too

  It was 5 or 6 zeros

  If necessary, contact acer for this information

  I hope that you have a happy holiday season

  Merry Christmas

  Walter, the time zone traveller

• Restore Windows Vista to Windows 7

  I bought my second hand computer and told me that windows 7 was already installed, even if the laptop computer used Windows Vista originally. However, the copy of windows 7 is currently installed is not genuine. I don't want to buy Windows 7 I'm going well with Vista.

  Is it possible to restore windows Vista without an installation disk?
  Appreciate any advice!

  Hello

  There are several methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  This method is probably more through the installation of Windows 7:

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• I need to reinstall Windows Vista, but it's come with a disk when I bought my computer

  I need to reinstall Windows Vista, but it's come with a disk when I bought my computer.  How can I get a copy of it?

  I need to reinstall Windows Vista, but it's come with a disk when I bought my computer.  How can I get a copy of it?

  1. call the manufacturer of your computer, ask a set of recovery disks. The entire cost is low and the money is well spent.
  The game allows you to restore your computer. Ask a manul on how to use the recovery discs.

  2. While the site of the computer manufacturer, ask to speak to a technician. Ask the person to teach you how to access your computer, Partition Recovery and utilization of the partition to restore your computer to factory State.

  3. see if you can find a friend who has a Microsoft Vista Installation DVD. Borrow it and reinstall Vista using your product key from the computer.
  If you are lucky enough to a friend, here's the tutorial for pure install using the Installation of MS DVD:
  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  4. this link may be useful...
  How to replace Microsoft software or hardware, order service packs and replace producthttp://support.microsoft.com/kb/326246 manuals

  Good luck.

• I need 2 reinstall windows vista, but have had is no longer my installation cd, cani always reinstall? __

  I need 2 reinstall windows vista, but have had is no longer my installation cd, cani always reinstall?

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• I need to reinstall Windows Vista to do a reinstall of Windows 7 upgrade?

  I have an Alienware Area 51 750i. He is initially provided with windows Vista but had a free upgrade to windows 7. My hard drive has acted lately and I think to replace. I have to buy a new drive for windows 7 or I can use my old copy and install it on the new hard drive. The computer came with a Windows Vista recovery disk and also the disk to upgrade to windows 7. Thank you

  You can reuse your Windows 7 license on the new hard drive. You need to reinstall Windows Vista on the new hard drive, and then perform a custom installation of Windows 7 during installation of Windows Vista. You may need to reactivate by phone:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Needed to restore Windows on my computer, I can't install Photoshop CS6. Although the license, the site indicates that the number does not match.

  Need to restore Windows on my computer, I can't install Photoshop CS6. Although the license, the site indicates that the number does not match.

  Invalid License http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html

  -http://helpx.adobe.com/creative-suite/kb/invalid-serial-number-cs4.html

  - and http://forums.adobe.com/thread/1038761

• No network adapter driver is available after reinstalling Windows Vista installation disk... Unable to connect to the network

  No network adapter driver is available after reinstalling Windows Vista installation disk... Unable to connect to the network

  Hello

  Know what type of network card you have and download the drivers of its supplier.

  It doesn't matter what it is always a good idea before re-install/upgrade to log on to the computer support page, download independent drivers from there and put them on a flash drive.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Recovery disk need to reinstall Windows Vista

  original title: need to help restore my laptop and do not have disc for windows vista untimate, how do I do that

  I have windows vista ultimate and need to reinstall operating system but do not have the disc to do this, what can I do, please email me at * address email is removed from the privacy * with a solution to this problem.  My computer is about to crash because of a sort of Trojan horse.  Please notify.

  Hello

  Here are the other ways to reinstall vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  Save all data, because it will be lost, do the above

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

  or try to remove malicious software

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Restore Windows Vista to factory settings

  Now, for a while I tried to reset my Windows Vista Setup. ERASE EVERYTHING on it. Every time I restart the computer and spam constantly F8, the debug menu appears where it has all the options. I'll choose repair your computer, but when I do, recovery appears. I do not want to restore it in time, I want to erase everything. Help, please!

  Hello

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a fee, if they were to have always available.

  _________________________________________________

  To reinstall Vista with the help of their recovery disk/s if they gave them, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  ___________________________________

  And if you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Them or us ask the right sequence of key.

  ___________________________________

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system in the event of hard disk failure.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  ___________________________________

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can borrow and use a DVD Vista Microsoft (selling retail or OEM System Builders License), which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as well as 32-bit and 64-bit editions different DVD lights.

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• How to restore Windows Vista to how it was this morning?

  original title: how to restore windows

  Hello

  I installed windows vista ultimate on my desktop xps1 and and want to go back to the way the system was this morning and the needs of hep to how.

  Note: The system was purchased with Home pemium then I upgraded to ultimate using a cd in 2009. but some problems recently and I was asked to upgrade or re - install the windows that I tried this morning but many of my programs installed is not there so I want to do back and then try upgrading insteead of custom installation, I did.

  all he said it back to step I got it this morning

  Hello Jack 76.

  "I asked me to upgrade or re - install windows.

  There is a big difference between an upgrade and a reinstall.

  "How to restore a computer to a previous Windows installation after you install Windows Vista"

  http://support.Microsoft.com/kb/933168

  As you say that you did a Custom Installation, see if you have a windows.old folder that is available and the formalities required for use according to the instructions above on how to 'dismantling' to an earlier version of the operating system.

  If you do not have the above, there is nothing that can be done about it.

• Restore Windows Vista from Windows 7 backup

  We have two computers a main computer (laptop) with Win 7 which we travel around with. We also have a desktop with Win Vista computer to which we would like to restore the backup for even less risk losing our data. I need help on how to restore from your external hard drive made of win 7 to Win Vista.

  Thank you

  Hi Fred,.

  You can connect the external hard drive to your Windows Vista-based computer, navigate to the location where the data is stored and copy the content, and save it on the Vista computer.

  For more information, you can consult the following article:

  Restore files from a backup

  How to back up files and recover data

  Hope this information is useful.

• Need to reinstall Windows Vista on HP laptop

  Hello

  My windows vista install on my HP DV2000 laptop is totally corrupted and I need to reinstall it. However, I don't have a disc if the serial number is stuck on the laptop.

  How can I get the disc distribution of microsoft?

  Thank you

  Cyrus

  Hello

  Go to the HP website and follow the hidden restore partition information (IE. Reboot the laptop and keep tapping the F11 key.)

  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c00814731#c00814731_disc

  If you do not have a hidden partition look at the bottem of the page to get a recovery disk.

  Please keep in mind that my answer is based on the information in your message. More the better I can answer, Slan go foill, Paul

• Qosmio G20 Vista drivers? No need to install Windows Vista

  Hello
  I'm new to this forum. My name is Francisco and I live in the Brazil. I have a Toshiba Qosmio g20_105 and it is running Windows Vista Ultimate EN RTM 6000 without problems.
  To do this, you must perform a clean installation of Windows Vista. The drivers for network (Intel PRO100), audio (Soundmax), TV (Toshiba PCI Tuner), modem (modem of toshiba), Alps pointing device are installed directly from microsoft. You must install the Toshiba, Toshiba Bluetooth nvidia display driver (monitor and stack), driver Toshiba flash media, toshiba RAID texas (drivers and utilities), toshiba remote control manager and ConfigFree for Windows Vista.
  You must have the Toshiba RAID drivers to install from the windows Vista DVD. Otherway, Windows does not recognize Toshiba RAID 0 and RAID 1.

  Below some pictures of my desktop of the G20 screen:

  http://www.rabayjr.com/Vista/myqosmiog20screen1.jpg
  http://www.rabayjr.com/Vista/myqosmiog20screen2.jpg
  http://www.rabayjr.com/Vista/myqosmiog20screen3.jpg

  And here is an example of the use of backgrounds animated with Windows Vista, deskscapes called dreamscene.
  It is in pause mode
  http://www.rabayjr.com/Vista/myqosmiog20screen4.jpg

  To perform a new installation of windows Vista:

  Please, download drivers Toshiba RAID here:
  http://www.rabayjr.com/Vista/drivers/RAID.rar

  1 copy the contents of this archive on a floppy disk, CD, DVD, or USB flash drive.
  2. Insert your Microsoft Windows Vista Edition Bootable DVD.
  3. turn on your computer and press F12 to display the start menu.
  4. Select the option to boot from the CD/DVD drive.
  5. on the first Setup screen, choose your language options, and then press "next".
  6. press on "install now".
  7 type your product key and then press "next".
  8. accept the license terms by checking the box, then press "next".
  9. when he asked "which type of installation that you want", press "Custom (advanced)".
  10. when it is asked "Where do you want to install Windows?", make sure that your media containing the Toshiba RAID drivers is connected to the computer, and then click on "Load driver".
  11. navigate to the location you copied the RAID drivers then press 'OK '.
  12. the installation program will return to the previous screen, but it will show that you have selected the TOSHIBA RAID driver.
  13 make sure that the TOSHIBA RAID driver is selected, and then press "next".
  14. continue the installation of Windows Vista as usual.

  Now, you will need drivers Toshiba for your Qosmio G20:
  See the information of Device Manager:
  http://www.rabayjr.com/Vista/qosmiodrivers1.jpg

  Drivers:
  1. SD memory controller
  http://www.rabayjr.com/Vista/drivers/SD_memory.rar

  2 battery and Bluetooth monitor
  http://www.rabayjr.com/Vista/drivers/bluetooth_mon.rar
  http://www.rabayjr.com/Vista/drivers/bluetooth_stack.rar

  3 display Nvidia GeForce Go 6600 driver
  http://www.rabayjr.com/Vista/drivers/nvidia97.52.rar

  4 Texas FlashMedia controller
  http://www.rabayjr.com/Vista/drivers/flasmedia.rar

  And finally the Toshiba Utilities:
  Toshiba Configfree
  Toshiba Assist
  RAID utilities
  Remote Control Manager
  Toshiba SD Memory utilities

  That's all...

  So, I say to you that Toshiba Qosmio G20 is Windows Vista Ultimate capable, indeed.

  Hope this helps the people who need and want to install Windows Vista Aero on their computers Qosmio G20.

  Post edited by: FranciscoJr

  Hi Francisco,.

  Thanks for this info. It is good to hear that it works.

  Good bye