I/o - error 1117 cannot start laptop AS5732Z

Similar Questions

• Error: "Windows cannot start the windows firewall/internet connection sharing (ICS) service.

  On my Eee PC under XP Home edition tablet, I get the error "Windows cannot start the windows firewall/internet connection sharing (ICS) service" when I try to access my firewall. I also can't connect to my router Wireless Lan to go on the internet. This may be due to some viruses that have been deleted using Microsoft Security Essentials.But the problem persists. Could recharge SP2 solve this problem or am I condemned to reload the operating system?

  Hi jdmanel,

  NOTE: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

  Follow the steps in the article.

  You cannot start the Windows Firewall service in Windows XP SP2

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  For reference:

  How to manually open ports in Internet Connection Firewall in Windows XP

• Error message "cannot start mssql$ sqlexpress on machine" need help!

  Error message "cannot start mssql$ sqlexpress on machine" need help!

  Hello

  -When exactly you receive this error message? It is at the start of the computer or at the launch of a particular application?

  If you use SQL Express DBMS and are faced with this problem, thanks for posting your query in SQL Server Express Forums for assistance on this issue.

• When you try to enter in my email I get and error saying "cannot start microsoft office outlook. Could not open window outlook..."

  When you try to enter in my email I get and error saying "cannot start microsoft office outlook. Could not open window outlook..."

  Outlook:

   

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Office newsgroups

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Outlook.General&lang=en&CR=us

  Discussions of general issues of Outlook.

  They will help you with your Outlook questions when repost you in the Office discussion groups above.

  See you soon.

  Mick Murphy - Microsoft partner

• Gettitng error message "service error: Windows cannot start the BITS service on Local computer" when you start BITS service

  When I try to start the Windows Services BITS service, I get the popup error message "service error: Windows cannot start the BITS service on Local computer.»  Error 2 ther system cannot find the file specified. »

  Where can I find the required file?  It is available from Microsoft to download?

  Thank you

  It could be a missing/incorrect servicesdll value. See if a request would help the BFE (#11) service registry fix in this page:

  Register various fixes for Windows 7/XP/Vista:
  http://www.Winhelponline.com/blog/Misc-registry-fixes-for-Windows-7-XP-Vista/

• [FIXED] WL library error start error: Windows Live Photo Gallery encountered an error and cannot start. Error code: 0 x 80070035

  Original title: error starting in WL photo library

  Hello guys,.

  I use the photo gallery of WL (latest version) for some time, but one day it stopped working without remembering any important changes that might break a.

  When I try to run it, it gives this error:

  ---------------------------
  Windows Live Photo Gallery
  ---------------------------
  Windows Live Photo Gallery encountered an error and cannot start.

  Error code: 0 x 80070035
  ---------------------------
  Ok
  ---------------------------

  I tried to reinstall it but without success. I've also renamed the files Pictures.pdX C:\Users\\AppData\Local\Microsoft\Windows Live Photo Gallery, but with the same result.

  Not to mention that the event log does not contain messages recorded on this subject and also the follow-up of the process with Process Monitor did not show anything that would tell me the cause of this problem...

  If someone from the Live team or an MVP watch that I can send you the output monitor process or any other information that you might find useful.

  Any other suggestions on what I can try next?

  Thank you!

  Chris

  I'm waiting for the confirmation of the guys from the Live team on this, but I've corrected this problem.

  The error came from the fact that Windows registry stalled Chronogram of some access roads network I had on my computer from a former WHS (Windows Home Server) box so basically, Windows Explorer - WL photo library was still trying reach these network paths, even if in Explorer / settings there is no references to WHS, so registry entries in neutral paths and wrong...

  Replace the data of those key in the Windows registry under the HKEY CURRENT USER corrected this problem and I was able to start WL photo library.

  :)

• After you have installed the Realtek drivers, I get code 10 error and cannot start sound.

  original title: help with my sound please

  After you have installed the realtek driver it says code error 10 can't start sound...

  also I can't find the button sound.video and games on the Device Manager heres the message in Event Viewer:

  Log name: System

  Source: PlugPlayManager

  Date: 17/05/2012-18:50:27

  Event ID: 12

  Task category: no

  Level: error

  Keywords: Classic

  User: n/a

  : My computer

  Description:

  The device ' in Build Conexant Type 2 modem "(HDAUDIO\FUNC_02 & VEN_14F1 & DEV_2C06 & SUBSYS_10250126 & REV_1000\4 & 37d33e44 & 0 & 0102) disappeared from the system without first be prepared for removal.

  The event XML:

   

     

      12

      2

      0

      0 x 80000000000000

     

      435

      System

      badimo-PC

     

   

   

      Modem Conexant - in the generation Type 2

      HDAUDIO\FUNC_02 & VEN_14F1 & DEV_2C06 & SUBSYS_10250126 & REV_1000\4 & 37d33e44 & 0 & 0102

      00000000

   

  Hello I want to,

  The problem you describe looks like you are maybe install the wrong driver for your sound card.
  Have you checked that the driver is for your specific device?
  If you look in your system's Device Manager, is there a yellow exclamation next to the audio controller?
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager
  If so, this seems to indicate that the drivers installed are not good for your sound card. Usually if you double-click the device in Device Manager, it will say something in the sense of "Device cannot start".
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Error: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19).

  Original title:

  Windows 7 no sound at all

  Hello

  I would like to ask help for Win 7 problem 'No audio '.

  I have a Win 7 64-bit Professional desktop PC. It has a motherboard Asus P5Q - EM.
  Previously, everything worked very well over a year, but now there is no sound at all. I see a little red x in addition to the speacer icon.

  I got a craphics card problem and it has been replaced, and shortly after, I didn't notice that no audio problem.

  First of all, I tried to fix the external audio card drivers - no help. Then I thought to use the motherboard
  audio only and removed the external audio card. I have cheked Bios that there is audio compatible motherboard.
  Windows Manager device shows Audio Realtek High Definetion. (Once I reinstalled externally
  audio card, but did not get it to work and I deleted again and focused on getting the Audio motherboard
  work.)

  Through the Device Manager, I uninstalled the device Audio from Realtek motherboard and all other audio related devices and start the PC.
  After you start Windows 7 detects audio devices well and tries to install the drivers but still said the driver installation failed.

  I also used the troubleshooter in Windows 7. According to the material and audio, I clicked on the audio playback troubleshooting. The system has tried to install the drivers, but all have failed in similar way as after rebootig.

  When I go to see the Audio the Realtek High Defenetion properties, it says:
  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  I downloaded the latest drivers (some 54 Mb file called: 64bit_Vista_Win7_R267) Realtek www-site and run it, but no help. Same problem - no sound at all.

  If I run application system information and go to the "components" > "Problem Devices", it is said Realtek High Definition Audio, error code: failure using the VxD loader. It is also noted on the VAN Miniport (IKEv2), error code: this device does not work properly because Windows cannot load the drivers required for this device.

  I also unplug the beam of the motherboard front audio jack. I thought it may create a connector related issues, but he did not make a difference.

  If I ask the system to update the driver using Device Manager, it says that the piloted is up-to-date.

  I checked the details Realteck Sound Device in the Device Manager and it says under the number "Problem code" 13.

  Also other devices under device 'Video controls and sound game' managers do not work. I uninstalled all the. After reboot Windows 7 detects all the. Win 7 tries to install the drivers, but always fails and yellow! singing appears next to all devices.

  Under the NIC in Device Manager there is another device with the yellow! sign as well. The WAN Miniport (IKE v2). I don't know if it has something to do with this audio problem? Win 7 detects it as well after uninstalling and tries to install drivers after the start, but is also always fails.

  Now, I'm confused and I don't know if the problem is really in the Windows registry database? What is error code 13 of Realtek Audio device and what is actually the VxD loader problem?

  I'm completely lost on how to proceed with this problem.

  Can someone give advice on how to continue with this question...

  Tomppa

  I plugged the the hardware id in the Microsoft Update Catalog and the device is identified as a C-Media CMI8738/C3DX PCI Audio Device but there only Windows 2000/XP drivers available through Windows Update (you need to install the ActiveX control to view and download the drivers):

  http://catalog.update.Microsoft.com/v7/site/search.aspx?q=PCI%5CVEN_13F6%26DEV_0111%26SUBSYS_011113F6%26REV_10

  Connect the hardware id PCIDatabase provides a link to C-Media (one-third to the bottom - device ID 0 x 0111):

  http://www.PCIDatabase.com/vendor_details.php?id=376

  However there are a of the drivers mentioned in the following link that can run, and I suggest to try:

  http://www.SevenForums.com/sound-audio/9824-c-media-Freezy-my-PC.html

  The driver is the "Striker 7.1 pilot" (striker81742.zip) in the following link:

  http://www.htomega.com/downloads.html

  An in these drivers .inf file has an id of material corresponding to your device.

  I recommend the creation of a System Restore Point before trying new drivers.

• Problems installing the Apple updates. System error program cannot start because MSVCR80.dll is missing on your computer. "

  Original title: I am a computer newbie, could someone explain/direct me?  Many thanks, Mark

  Recently, I received an Apple update normal I-tunes.  Have done a little before, never with a problem.  This time, it seemed that everything was fine, then at the end (when expects a message "successfully installed", I received an error box with this: APS Daemon.exe - error system, the program cannot start because MSVCR80.dll is missing on your computer.)  Try reinstalling the program to fix this problem. "Well, since nothing else seems to work (or helping) and my music files have been backed up, I uninstalled I-Tunes successfully, then attempted to re - install.  I had to download the installation of Apple, which was very good. Once again, everything seemed to go smoothly, installation, etc. until it got to the point when he said "Marketing Services".  Then, as before - everything stopped and jumped up to the exact same APS Daemon.exe - error box system (with the same message) referencing MSVCR80.dll once again, saying that it is missing and try to reinstall the program.  From now on, I don't know exactly what that means (I know, I know) or if it's something someone like I could fix (or even try), or if I should just run down to my local computer store?   Never had any problems with the Apple or Windows updates before this one.

  Thank you to everyone how wants take a few minutes and help a person who has started working on computers far too late in life!
  Sincerely, mark Hawk

  Hello

  Uninstall everything according to the instructions from Apple:

  «Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7»

  http://support.Apple.com/kb/HT1923

  ___________________________________________________

  It is also the same list of what to remove what is in the link above from Apple:

  http://pcsupport.about.com/od/findbyerrormessage/a/MSVCR80-DLL-not-found-missing-error.htm 

  __________________________________________________

  Or try this program to remove it:

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  Then, download and save the iTunes on the desktop > then right click > select run as administrator to install.

  If the advice already given does not, please contact Apple for assistance.

  "Not to install iTunes or QuickTime for Windows"

  http://support.Apple.com/kb/HT1926

  "iTunes support-how to use iTunes.

  http://www.Apple.com/support/iTunes/

  "Contact iTunes Support.

  http://www.Apple.com/support/iTunes/contact/

  Or ask in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

  See you soon.

• Receive the error message cannot start the base engine, the application can not continue trying to work with Skype and Intervoip

  Original title: Intervoip and skpye does not work on my computer. When I open the PC screen, cannot start the base engine, the application can not continue. How I have this problem?

  My Intervoip and skpye does not work on my computer. When I opened the PC screens, failed to start the base engine, the application can not continue. How I have this problem?

  Base engine
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/core-engine/a18d491c-25e2-4473-A03B-1f3161c5131b

  Have you tried right clicking on the shortcut to the program or the .exe and select "Run As Administrator"?  Perform, even if your user name is an administrator.

  Try right click on the actual Setup.exe and choosing the option "Run As Administrator"?  Perform, even if your user name is an administrator.

  Two applications load mode safe mode with setting in network or a clean boot?

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  If you test with another Windows user, have the same problem?

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  First try checking not be (read-only) to see if it reports any problems file or hard drive.  If this is the case, start by checking the two boxes, in no other rerun.

• Error Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) Cannot read CD/DVD

  Original title: Acer laptop DVD drive missing

  Hello

  I have an Acer Aspire 5740 G computer laptop running Windows 7. When I tried to play a movie today, it did not work. The green light on the drive of CD flashed several times then stopped and all was silent. I opened my computer and saw that the CD/DVD drive wasn't listening it. I then opened by Device Manager and the two things under CD-ROM/DVD-ROM readers had a yellow triangle and an exclamation point on them.
  One thing has been called; SVI 2ZGTAB8HQ7G5 SCSI CdRom Device
  The other thing was called; TSST Corp CDDVDW TS-L633C
  I clicked on both and saw the message; "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »
  The last time I used the CD player a burn a disc over a month. I used Microsoft Fix It but it says to remove the drive and plug it in somewhere else, and I can't really do this because it's the only drive on the laptop and I'm worried I might break if I go out there with force. Can someone help me? I would really appreciate it.

  Hello

  1. what Microsoft FIXIT did you use exactly?

  2 did you a recent software or changes to the material on the computer?

  I suggest you try the steps mentioned below.

  Method 1: Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  I also suggest you run the FIXIT from the link below and.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 3:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  You can run the FIXIT or you can try the manual steps and check.

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Method 4:

  Re-install the drivers DVD

  Completely uninstall the DVD drivers from Device Manager, and then install the latest drivers for your computer.

  Open the Device Manager.

  Once the drivers are completely uninstalled, download the latest drivers from the manufacturer of the computer.

  http://support.Acer.com/us/en/product/default.aspx?tab=1&modelId=1878

  Hope this helps and keep us posted.

• USB keyboard & mouse error "Windows cannot start this hardware device - code 19.

  Original title - USB keyboard & mice problem

  Hello

  I'm under 64-bit Windows 8.

  Problem: Keyboard Logitech wireless & mouse (S520) does not work.

  1 week ago that I tried my HARD drive on different USB ports on my PC. I disconnected the keyboard and mouse wireless receiver and reconnected. Since then he has stopped working.

  In Device Manager, it has a typical yellow marks against HID keyboard and mouse. I tried to uninstall and reinstall, off and on, makes no difference.

  When I go into the properties by right-clicking, the status is 'Windows cannot start this hardware device Code 19'.

  I tried Googling this error but I found that the solution is only for CD/DVD problems.

  I uninstalled USB Root Hub that is not made any change in the problem.

  Have restarted severl times and power disconnected from the PC and thus reloaded.

  I am currently my PC from iPad using the app Splashtop.

  I really hope that someone can help me.

  I've restored my windows from 16 April that solved the problem. However, I learned a lot about the registry keys and all.

  Thank you for taking the time from your busy schadule and answer my stupid questions.

  Thank you.

• 0xc000007b error / Lightroom cannot start

  Hello

  I can't launch lightroom 3. I have Windows 7.

  If I want to start, there is an error:

  "The application cannot start (0xc000007b)."

  What can I do?

  Thank you

  Best regards

  Based on the user comments and suggestions, we have updated our documentation on this subject with a few new solutions.

  http://helpx.Adobe.com/Lightroom/KB/error-Unable-start-correctly-0xc00007b.html

  We are locking this thread. If you have any other questions or still see the error, please continue the discussion on this thread: http://forums.adobe.com/message/4836005

• DVD/CD Rom error: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19).

  Original title: CD-ROM/DVD-Rom problems

  My CD-ROM/DVD-Rom drive does not work when I check the system, I get the following message "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19). "How to solve this problem?  Thank you in advance.

  Try following the steps under "Windows 7 or Windows Vista" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• When you try to activate Windows Security Center, receive error message "cannot start Windows Security Center.

  try to open soundcards Security Center declined as I click to put on there is one message the servicem of windows Security Center cannot start...

  * original title - disable windows security center service .How can I makr turn on please *.

  Hi tsedeyasefa,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/Security-Center-service-cant-be-started/49277301-85c2-4B13-9f71-1bd08e4688a0

  I hope this helps!