Similar Questions

• Replaced the hard drive on my dell inspiron 1525 Vista restored. Now "unable to detect wireless networks.

  Replaced the hard drive on my dell inspiron 1525 Vista restored. Now "unable to detect wireless networks.

  MarkWilkins,

  The utility of desktop / laptop must be installed first (if applicable), then the drivers from the chipset. If they are NOT installed everything first, then the rest of the drivers will not install.

  How to download and install drivers in the correct order

  Rick

• I installed a new hard drive for my dell Inspiron 1525 and try to install windows 7. He asks me to install the driver. How to do it

  I installed a new hard drive for my dell Inspiron 1525 and try to install windows 7. He asks me to install the driver. How to do it

  Using the Dell recovery disks to reinstall?

  The origonal drive failed?

  If you are using a real MS win dvd during the first part of the installation it can not find a drive or ask a driver, then the driver is obtained from Dell, specific to your model, its likely the driver sata, you need to download to say a USB and then point to this file when the installation application the third-party driver.

• Losing GB off hard drives on my Dell Inspiron 17

  Every day I lose GB do not know why or where they're going. My Dell Inspiron 17 a (500) 444 GB to start (New). After downloading music and other software my laptop contained 355 GB of space left. 25/12/14 I had 203 GB and today, 26/12/14 there are 183 GB left. Every day my hard drive OS(C:) perd de l'espace!) Please tell us how I can stop this automatic GB of space loss before I did anything. Thank you.

  SS

  There is a free 3rd party app called Treesize from Jam software that tells you which occupies the space.

• After replacing a hard drive

  I just replaced a hard drive on my pavilllion p6210f.  I need to know what to do next.  All I have is a 7 (64-bit) windows repair disc I made when I got the computer.  It did not come with any CD. What should I do next?

  You did just the repair disk or the recovery partion disk? The recovery partion disk should have 3 or 4 discs. Is where the installation discs are now, they are made from the recovery partition, saving money to have the discs are provided with all computers.  If this isn't the case, the only thing to do is go to drivers and support for your model page and hope they have the factory drives listed. You pay shipping.

• I installed a new hard drive on my dell 1545, I bought preimum windows 7 64 bit and install it dosent detect the hard drive

  I broke my hard drive on my dell inspiron 1545, I bought a new 1 TB WD HDD and a new operating system windows 7 preimum 64 bit. I installed it

  He dosent see the hard drive, it says re seat the drive and it's in the rite. What should I do

  The hard drive is may be defective. Take it back to the store and get his change for a good...

• Failure of hard drive on HP laptop DV 6000 Pavilion Windows XPsp3 OS - need help data recovery

  Failure of hard drive on HP laptop DV 6000 Pavilion - need help data recovery

  HP Pavilion DV 6108 NR, RG365UA, purchased late 2006 at best buy, with Windows XP, upgrade to Service Pack 3. It has a Fujitsu 60 GB HDD partitioned into C: and a D: Recovery.

  Windows tries to start, but goes to a blue screen with the message: "Unmountable Boot Volume" for a second, then just guard recycling until I force a shutdown.

  Phoenix BIOS, hard drive test result: "Fail #1-08".

  I ran a program to drive on the Cdrive analysis/recovery and it seems to show the directory structure intact, and he was able to recover some files. I used the free Seagate (which only retrieves the small files). The second pass only works so well and in the third set as the program says that I should not go further, and I need to contact a professional drive recovery company.

  However, drive D seems to be intact, so I wonder if the disc is damaged or just one aspect of the logical drive C is bad.

  How can I get the D: to run recovery on it software? The recovery discs, made by Best Buy, just proceed to the R / F / Q option screen, and when I press R, I get a blue screen every time.
  Pressing the F10 key at startup bothers me nowhere. Ditto the key F11.

  I don't like hard disk; This is the data (files, documents, images, etc.) that I want to.
  I contacted HP to order recovery disks, but they are no longer available for my computer.

  Any suggestions would be greatly appreciated!
  Jon

  Update...

  I found a site that offers the following:

  http://www.computersurgeons.com/p-13442-recovery-kit-435422-001-for-HP-model-number-dv6108nr.aspx

  Recovery Kit 435422-001 for HP model dv6108nr number

  

• Replace all hard drives

  Hello

  I have two PS5000E without.  One is the production and the other is off site and contains only replicas.  I need to increase capacity on the SAN production so I will replace all 16 discs with 2 TB drives, and I also want to move the RAID level of 5 to 6.

  I only have not supported with Dell more so instead of borrow a San to a rep, I plan to use SAN offsite to help me with the process, and I'm ok with not having DR is not for the few days that it will take.  I have backups.

  I think my plan is healthy, but I would like to hear from an expert before I go ahead with it.  What I intend to do is:

  1. Save the config for the DR SAN
  2. Break replication
  3. Bring the DR SAN on site
  4. Attach a serial cable, turn on and run reset to restore the config factory
  5. Run Remote Setup Wizard to set up and attach it to the Group on the site
  6. Remove the Member on the site of the Group on the site
  7. Wait for data to be moved to the DR SAN
  8. Replace all hard drives in the on-site SAN
  9. Run Remote Setup Wizard to initialize and he join the band on the spot
  10. Remove the DR SAN of the Group on the site
  11. Wait for data to be moved to the square of SAN
  12. Run Remote Setup Wizard to initialize it
  13. Copy recorded in DR SAN configuration file and restore the original config
  14. Return of the DR SAN to its location off site
  15. Reenable replication

  I'm doing this right?  Is there an easier way?

  Looking forward to your answers.

  Curt

  Firstly, according to the firmware, if new readers are dell disks they will be rejected by the frimware.

  Two.  Assuming that the 2 TB drives are OK, there is a way more simple that does not require you to reconfigure your table of DR.

  Replication pause 1.).

  2.) stop of the table of DR.

  3.) table offf DR power, remove and package upward DR drives, but leave them on the DR site.

  4.) chassis Bring DR w/o readers to the main site.

  5.) cable chassis DR

  Stop 6) primary site servers.

  7.) stop of the main table.

  8.) remove readers of the main site of the chassis and install these drives in empty chassis of DR.

  9.) power return to the top and check it came OK online.

  10.) install new drives 2 TB in the main frame.

  11.) power up and add it to the main group.

  12.) add the 2 TB array in its own pool.

  13.) create the RAIDset RAID6 and let it complete the construction.   Make sure that all network ports are configured and upward.

  Fusion 14.) the pools and the data will start interlacing to the new Member.

  (15.) once you see data moves OK the new Member, select the 'old' member of the DR chassi and move this member to the temp pool.

  16.) once all data is migrated, reset the table of chassis DR.

  17.) remove the drive from the chassis DR.

  18.) frame to move to the site of DR.  Readers to back power and above.

  19.) re - enable replication

  Kind regards

• Is it possible to replace the hard drive with an SSD? or would it be too expensive?

  Is it possible to replace the hard drive with an SSD?

  or would it be too expensive?

  Yes.  There are several alternatives.  I found a way relatively inexpensive, using a map of mSATA (very small SSD) and an adapter to connect it to the connector IDE 44 pin internal of my PowerBook.  It works very well.  Rather than repeat what I posted previously, you can watch these two topics (which also has good info, other users)

  Re: This win to install a SSD drive in a PowerBook G4?

  Re: SSDS  (my post is halfway - "this is how I did with my trusty Pismo...) »)

  FYI - I have used the adapter is even cheaper now

  https://www.Amazon.com/GP/product/B009BA8V4M

• Replace the HARD drive in mid-2012 MBP of SSD?

  Given to replace my HARD drive of 1 TB in MBP mid-2012.  This MBP has already been customized (by Apple) to 2.9 GHz i7 8 GB mem.

  I'm looking for a solution at least to 1 TB also. How about this:

  Samsung 850 EVO 1 TB 2.5 inch SATA III internal SSD (MZ-75E1T0B/AM)

  IS it really that simple, as suggested by some video: current copy to SSD connected externally, than to go ahead with replacement? Then you can continue normal OSX updates as usual?

  Is it really worth?

  Yes, I do some "prosumer" video (FCP) and audio (Logic, Cubase, Pro Tools) - and use external USB 3 HARD drive.

  Yes, it was worth it. The difference between day and night.

  It's easy. How to create a clone of startup

  I don't know Samsung but 2.5 "is inside that you need, SATA III Yes.

  but another highly recommended option is https://eshop.macsales.com/shop/SSD/OWC/lineup

  MacBook Pro (15-inch mid-2012), OS X El Capitan (10.11.6), i7 480 GB SSD 16 GB RAM iPhone5 iOS10.0.1, Parallels10.0.2, HP OfficeJet Pro 8620

• Problems with folder permissions after replacing the hard drive

  Hello

  Recently, I replaced the hard drive on my mac.  Already before the replacement, I got the files that I had locked.  Now I'm unable to open the file.  I get the error "the folder 'nom_de_dossier' can not be opened because you don't have permission to see its content".  I looked at the permissions for the folder and everything he says is fetch.  I ran a command in the Terminal and for one of the records in question, that's what I see-

  drwxr-x - 13 501 501 442 5 July 2013 MG

  Any help would be greatly appreciated!

  Running OS X El Capitan

  10.11.4 version

  Try this first:

  Start the mac all holding the SHIFT key, it is slow, connection, and then select Restart from the Apple menu.

  When this does not help:

  Reset password utility in the recovery Partition:

  1. Restart your computer from the recovery partition.
  2. Open disk utility and run a repair permissions on your boot volume (in ElCapitan click the first aid tab). Once this completed, close disk utility. We do this for good measure.
  3. Open a Terminal from the Utilities menu. Type in resetpassword and select your user (NOT administrator system/root) account in the menu drop-down.
  4. Click on the Reset button at the bottom of the window ACL section and Reset the folder permissions.
  5. Exit the utility password and return to the main recovery menu.
  6. On your keyboard, press ⌘ + Q and restart your computer. It is very important that you don't hold down the power button to exit the recovery session, or the ACL Reset to occur.

• I am about to replace my hard drive. How can I reinstall forefox and always keep all my favorites and other related information.

  Question
  I am about to replace my hard drive. How can I reinstall firefox and keep all my favorites and any other relevant information

  The profile is a file that store your personal information in a safe place

  • https://support.Mozilla.com/en-us/KB/profiles
  • here explain how to make a backup of https://support.mozilla.com/en-US/kb/Backing%20up%20your%20information profile
  • here explain how to restore

  https://support.Mozilla.com/en-us/KB/recovering%20important%20data%20from%20an%20old%20Profile

• Replacing the hard drive on my Portege A200

  Hi, I would like to replace the hard drive in my a200 with a bigger, but I don't know how to remove the current, just wondering if any of you guys could help me?

  Thank you james

  Hello James

  Unfortunately the A200 does not for me, but the concept is still the same. At first check if you can find coverage of HARD drive in the lower corner of your unit. If you can't find it from the outside as it comes to the very complicated situation. It is possible that the HARD drive is under the keyboard.

  If you have not many don't experience do it alone, because you can damage something, and the guarantee is no longer valid.

  Good luck!

• Satellite M110 - how to replace the HARD drive?

  Need to replace my hard drive because the original is f & % $ ed.

  I tried to connect the original hard drive from my other laptop via a USB cable to Sata, but it does not appear. You can feel it spinning. I was able to do a test of HARD drive on it and it failed in the Toshiba via a bootable CD. Since I can access the drive HARD to get to the recovery section, which is the best way to reinstall windows XP on it, so I can use the original XP key on the bottom of the laptop. As I know that you usually have the right version or OEM windows copy in order to use certain keys.

  Any help would be greatly appreciated.

  Would also be a Western Digital Scorpio Blue WD1600 8 MB 160 GB 2.5 "SATA Hard Drive fit for the Toshiba because they are all two SATA.

  Hello

  Your ad is a little confusing... What HARD drive you use in what book now?

  If you want to install the OS on your old/new HARD drive, so you can use t a converter USB SATA. Therefore, use it as internal drive HARD.

  In addition, a HARD of Western Digital drive would be appropriate due SATA port. :)

• Stream HP 200-009: replace SSD (hard drive) and reinstall Windows and drivers

  Hello

  My warranty is over a few months ago and I need to replace my HARD drive which is unnecessary, because all the space is taken by the OS, I can not upgrade to Windows 10. Could you please help me how to recover my key Windows and drivers HP before changing my HARD drive + tips on replacing drive HARD would be also useful. There is no service HP here so I have to do it myself.

  Thank you, I finally solved the problem by creating a partition under Advanced options and recovery of Windows drive, and you select Reset. Search for main windows and use Windows system image did not work with the version of Windows OEM.