I put classic on a tiger os if the classic I have in it's defective

I put classic on a tiger os if the classic I have in it's defective, I want to run some sys. 9 programs

You have a classic work on another machine?  You can copy the folder mac os 9 [to get name] your Tiger machine.

Create the new partition on external drive with classics included drivers.  install the 9. 10 installation.

Tags: Mac

Similar Questions

  • How can I put ONLY 9 tabs, NO 15, on the new tab Page?

    How can I put ONLY 9 tabs, NO 15, on the new tab Page?
    (First OFF... Please do not read this as being written by an angry person.) I'm just frustrated with the browser that I liked for years. I hope someone can help me)
    For a long time, I had my Firefox (version 33.0.2 - even if I don't remember getting mentions "update") defined so that every time I clicked on the tab new symbol '+' to create a new tab (which has the "new tab Page" on that), the NINE inch nails would be shown for my SELECTION and PIN sites. I LOVED!
    Yesterday, I opened Firefox and NOW when I click on the '+' to open the new tab Page... FIFTEEN thumbnails appear, 5wide x 3down, (and to be honest I probably would have the habit of 15! ha).
    Here's the PROBLEM: NONE of the thumbnails are "compressed". They ALL have "liberated" up yellow icon to the left and clicking on does nothing to remedy this of course. Other that THAT, everything else behaves normally. (that is to say moving the thumbnails, deleting, swap... I just can't pin THEM!)
    FINALLY, I prefer my 9-repositionable decals on the new tab Page.
    I went through ALL the options on the side, upside down and backwards, and I just get more frustrated.
    Can someone help me?

    Hello

    If you can see all your tiles, you can change your settings in settings page:

    1. In the address bar, type Subject: config and press enter. The subject: config "this might void your warranty!" warning page may appear.
    2. Click on I'll be careful, I promise! to keep the comments: config page.
    3. Search for browser.newtabpage.columns and change it to 3, or however many columns you like
      • Note: browser.newtabpage.rows allows you to change the number of desired lines as well

    You can also set a fixed number of tiles with the following extensions:

  • Hi all, I have an iMac (21.5 inch, mid 2011) with 4 memory slots, 2 has 2 GB each, is it OK to put a 4 GB in each of the empty slots or should I buy 4 new 4 GB and replace all, Sebastian Cheers

    Hi all, I have an iMac (21.5 inch, mid 2011) with 4 memory slots, 2 have a 2 GB each, is it OK to put a 4 GB in each of the empty slots or should I buy 4 new 4 GB and replace all, Sebastian Cheers

    You can put 2 x 4 GB DIMMS in the empty slots, this will give you a total of 12 GB. iMacs are very sensitive to the RAM, it is best to buy RAM from reliable sources like Crucial (direct purchase) or OWC OWC RAM

  • After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. Major pain

    After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. The Major pain. Any help would be greatly appreciated.

    Please test after taking each of the steps that you have already tried:

    Step 1

    Take all of the measures suggested in this support article, including those under the title "If the previous steps do not work." It is the starting point for a new effort to solve the problem.

    Note that, as stated in the article, the computer will not sleep, if some sharing services are enabled. In the menu bar, select

     ▹ System Preferences... ▹ Sharing

    Disable all sharing services.

    Step 2

    If sharing music iTunes home sharing is enabled, disable it or quit iTunes. Do the same with third-party applications that have a similar feature.

    Step 3

    Select

     ▹ System Preferences... ▹ Accessibility ▹ Speakable Items: Off

    Step 4

    Select

     ▹ System Preferences... ▹ ▹ Advanced Bluetooth...

    and uncheck the two boxes marked

    Open Bluetooth Setup Assistant at startup if...

    Step 5

    Reset the printing system.

    Step 6

    Back up all data.

    Triple-click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:

    /var/vm

    In the Finder, select

    Go ▹ go to the folder...

    from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

    A folder named 'vm' should open. Inside, there may be a file named 'drag '. Move this file and only this one in the trash, but do not yet empty. You will be asked for your password. Close the folder window.

    Restart the computer and empty the trash.

  • How to I put online media and program libuary on the Media Center, I have everything expect those two, they are absent

    online media, absent on the media library

    How to I put online media and program libuary on the Media Center, I have everything expect those two, they are absent

    Check the settings of language and the region under the Control Panel, make sure that it is there.

    You can also try a manual download by pressing 'Download now' tab under tasks > settings > General > automatic download in WMC options.

    Make sure that during this firewall or IPSec is does not interfere with the download.

    If the above does not help then run Setup again.

    [Tasks > settings > General > installation Windows Media Center > rerun him.]

    Make sure you have the latest version of Silverlight or Adobe Flash Player installed.

    S.Sengupta Media Center MVP

  • How can I put an icon for quick start on the desktop, to format dvd - rw discs

    Hi all. I am a novice with a pc and would appreciate an answer to my problem, when I put a dvd on to back - up, I usually get the message on sceen saying that the dvd will be formatted, how I put that system on my desktop at the top of the page, as an icon of quick start, I have a number of discs dvd - rw with stuff on them that I want to remove in order to use the same. hope you can help.

    with friendly, J, Sheppard.

    Hello

    Built into Windows

    Erase a CD or DVD
    http://Windows.Microsoft.com/en-us/Windows-Vista/erase-a-CD-or-DVD

    Erase a CD or DVD
    http://Windows.Microsoft.com/en-us/Windows7/erase-a-CD-or-DVD

    The Navigation pane is in the main panel of Start - computer

    Excellent forum for questions of CD/DVD
    http://www.myce.com/

    =======================================

    How to erase a CD-RW/DVD-RW. Free, fast, easy.
    http://www.YouTube.com/watch?v=NEiNxXgEJbY

    BurnAware Free is a CD, DVD, Blu - ray disc burning software. It is ideal for users with basic
    burning needs as backup, creating data, audio, MP3 music, DVD-video and disc to disc burning
    images. Free, easy to install, it allows you to save your files to disc quickly and offer clean,
    flexible interface for you help complete your burning tasks much faster (free)
    http://www.BurnAware.com/

    Active @ DVD Eraser is a free easy to use to erase the DVD - RW, DVD + RW or CD - RW media
    to clear the old data of the disk. There are two methods of deletion: (Freeware)
    http://www.NTFS.com/dvd_eraser.htm Active @ ISO Burner 2.1 is a simple to use dialog box style to burn a CD/DVD/Blue Ray ISO software
    images are compatible with the ISO 9660 standard. Automated burning is also supported. (Freeware)
    http://www.NTFS.com/iso_burner_free.htm

    ImgBurn supports a wide range of file formats image - including BIN, CUE, DI, DVD, GI, IMG,.
    ISO, MDS, NRG and PDI. It can burn the Audio CD of any type of supported via DirectShow file.
    ACM - including AAC, APE, FLAC, M4A, MP3, MP4, MPC, OGG, PCM, WAV, WMA and WV. You
    can use it to create DVD video discs (from a VIDEO_TS folder), HD DVD video discs (from a HVDVD_TS folder) and Blu - ray video discs (from a BDAV / BDMV folder) with ease. It supports
    Names of Unicode folder/file, so you should not experience problems if you use an international
    character set. ImgBurn takes over all the Windows of the OS - Windows 95, 98, Me, NT4, 2000, XP,.
    2003, Vista, 2008 and 7 (including all the 64-bit versions). If you use the wine, it must also run
    under Linux and other Unix-based x 86. It is a very flexible application with several advanced
    characteristics that are often lacking in other tools, especially when it comes to burning DVDs video
    discs. It supports all recent orders without the need of updates (including booktype / bitsetting /)
    Advanced settings on many of the most important - i.e. BenQ, LiteOn, LG, NEC, Plextor, Samsung,.
    Sony). (Free version)
    http://www.ImgBurn.com/index.php?Act=guides

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • How to put two images in an image on the windows photo gallery

    I need to know how to put two images in an image on the windows photo gallery.

    I need to know how to put two images in an image on the windows photo gallery.

    =================================
    If you say you want to join two images
    edge to edge that's easy to do with the free-
    Ware IrfanView.

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    IrfanView and IrfanView plugins
    http://www.download.HR/download-IrfanView.html

    Once you have downloaded IrfanView and
    installed... Open the program and go to...

    ... Image / create the Image of the Panorama...

    Make your choice and click on the button create an Image.

    When you see the combined images displayed
    in the display... go to... File / save as...

    Choose a location...

    Choose a format...

    Give the file a new name...

    Click on... Save...

    Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • My V715W was not printing black print cartridge replaced with cartridge Dell, error message says lack of empty, re-installed ink cartridge the cartridge with the same message. Put original cartridge is black and got the same error

    My V715W was not printing black print cartridge replaced with cartridge Dell, error message says lack of empty, re-installed ink cartridge the cartridge with the same message. Put original cartridge is black and got the same error

    My dells V515w printer will not print after that I changed the cartridge, the cartridges black & color dells. There is no print blank paper. Re-installed I'm really lost.

  • I have a HP CP2025DN color laser printer. He puts blue points approximately 1 ' part towards the bottom of page. Help?

    My HP CP2025DN puts blue points approximately 1 ' part towards the bottom of each page printed on the left side of the page.

    I changed the toner cartridge and clean the cartridge manually and by using the cleaning ability. It's still there. Apart from that, everything works great.

    Any suggestions?

    Hi specwarman,

    I would replace it by a new HP OEM cartridge.

  • Error "your license may not be downloaded, put to upgrade to internet explorer 7 or higher, I have windows 9" when you try to read the torn pieces.

    Actual title: windows media player

    Hi guys ive update to windows 7 on xp, but having a problem of playing music with media player 12. IM tearing my drive and it works but when I try to play a song, it goes to the web and says your license may not be downloaded, put to upgrade to internet explorer 7 or higher, I have windows 9.

    So to make sure she wasint my disc I downloaded i tunes and they all copied without probs and play without a disc loaded.
    Can anyone help please id prefer to use media player

    Hi Grego,

    Thanks for posting your query in Microsoft Community.
     
    You are not able to play songs torn on Windows Media Player 12. I'll be happy to help you with this problem.

    Method 1: I suggest you follow the steps to run the troubleshooter from the link and if it helps.
    Open the troubleshooting Windows Media Player settings Troubleshooter
     
    Open the troubleshooter in the Windows Media Player library
     
    Method 2: If the problem persists, I suggest you delete the database of Windows Media Player. To do this, follow these steps:
    (a) output Windows Media Player.
    (b) click Start, run, type %LOCALAPPDATA%\Microsoft\Media Player, and then click OK.
    (c), select all the files in the folder and then click on Delete on the file menu.
    Note: You don't have to remove the folders that are in this folder.
    (d) restart Windows Media Player.
    Note: Windows Media Player automatically rebuilds the database.
    If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:
    (a) output Windows Media Player.
    (b) click Start, click Run, type % LOCALAPPDATA%\Microsoft, and then click OK.
    (c) select the folder Media Player and then click on Delete on the file menu.
    (d) restart Windows Media Player.
    I hope this helps. Try the above steps and get back to us for more assistance and with the requested details, if the problem is not resolved.

  • Open an Image in Photoshop puts a pink color on top of the Image.

    I work with the CC 2015 version of Photoshop. When I start a new image in Photoshop, everything is fine. When I open an image in Photoshop, it puts this pink color on top of images. I have a black and white image for example, and it opens in Photoshop causes the white part turn pink. Similarly just regular color images get a pink above them, as if I put a pink colored filter on top of the image. I scoured around and I can't seem to find an answer to the problem I have. Any help would be appreciated. I would like to mention that all open images mode is RGB.

    Looks like the problem fixed itself. I left on Photoshop and then re - open the photos everything was just peachy. In this case, even once, that I will remember to take a screenshot of it. I honestly don't know what could have caused this is the first place to be completely honest.

  • I downloaded Lightroom 6 today (single license), but when I try to put in place, it is blocked with the comment "product installed only on a 64-bit system.

    I downloaded Lightroom 6 today (single license), but when I try to put in place, it is blocked with the comment "product installed only on a 64-bit system.

    Hi Fred,.

    6 Lightroom requires Mac OS X 10.8 superior, or a 64-bit version of Windows 7, 8 or 8.1. See the system requirements for Photoshop Lightroom for Mac OS and Windows

    It could be useful!

    Kind regards

    Shelly

  • I'm trying to sign several documents and I have my saved signature under "fill &amp; sign" the organization that generated the forms highlighted the signature lines and when I try to put my signature, it is pushed outside the signature.

    I'm trying to sign several documents and I have my saved signature under "fill & sign" the organization that generated the forms highlighted the signature lines and when I try to put my signature, it is pushed outside the signature.

    Hi katepell,

    You can simply drag the signature to the desired place by holding it with the mouse.

    Thank you

    Abhishek

  • I use Photoshop CC and have just watched a tutorial by Andy Anderson about bosses. In the tutorial Andy put a frame around a picture using the fill on the Edit menu. When I try the exercise my fill window is different and that is not the image

    I use Photoshop CC and have just watched a tutorial by Andy Anderson about bosses. In the tutorial Andy put a frame around a picture using the fill on the Edit menu. When trying to exercise my fill window is different and does not have the picture frame option. How to overcome this please?

    Hello

    Please, go to the filter menu and choose make it > photo frame.

    Thank you

  • Adobe is able to put a spell checker option/Dictionary on the tittle, as part of its developments Editor?

    Adobe is able to put a spell checker option/Dictionary on the tittle, as part of its developments Editor?

    Hello

    It seems to be a good suggestion. I filed a request for this feature, you can also: feature request/Bug Report Form

    Thank you

    Regalo

Maybe you are looking for