I recently replaced the hardware on my system, and now I need to activate Windows.
new hardware after windows activation
I just put new material in my old computer had to reinstal windows, and now I'm trying to activate my windows again
What material did you change?
To analyze and solve problems for Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )
Once downloaded, run the tool.
Click on the button continue, after a short time, continue button will change to a copy button.
Click the copy button in the tool (ignore the error at this stage) and then paste (with r-click and paste or Ctrl + V) in your message.
Please indicate the version and edition of windows from your COA. do not specify the product key.
Tags: Windows
Similar Questions
-
hard drive went bad in my computer hp and was replaced, I can't find the disk came with it or restore disks, I'm not sure I ever had any, is a model of Tower not laptop I need to know if there is a way to download a copy for my computer on a drive of my laptop or what should I do?
Hello
There is no download available on the Net and your hard drive as failed now, you are unable to make the recovery of the disks.
And you cannot use from recovery disks of a different brand or model (laptop) to reinstall Vista on your Tower / Desktop
Contact HP and ask them to send you a set of recovery disks.
http://WWW8.HP.com/us/en/contact-HP/contact.html
"How to replace Microsoft software or hardware, order service packs and replace product manuals.
http://support.Microsoft.com/kb/326246
See you soon.
-
My hard drive has left an old system to a new system and now I can not activate Windows.
Cannot download the drivers to activate Windows
I spent two days now trying to get a computer at work, I've built. I use new parts other than my used hard drive previously. I was not able to install the drivers for my network so I'm stuck right with the activation screen when I connect. If I do not activate and then I get kicked out and have to log in again. I cannot connect to the network to turn on obviouly and when I call them they say my ID intillation in does not correct and they don't recognize it as a valid product. I then remove my hard drive and put it back in the old machine and as if by magic, it works fine after activation. How am I supposed to install my drivers so I can activate if I can't go to my screen to install? This is the second time that this happens, and I really not prefer to buy a new windows disk for something that already works.activation by telephone (call of the operator)
Click the Start button
in the search box, type
SLUI 4
and press the Enter key
Follow the instructions, but when asked what service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with youTo analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag tool
(download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )
Once saved, run the tool.
Click on the button continue, which will produce the report.
To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
-* in your own thread *, pleasePlease also state the Version and edition of Windows cited on your COA sticker (if you a) in the case of your machine (or inside the battery compartment), but does NOT quote the key on the sticker!
http://www.Microsoft.com/en-us/howtotell/hardware.aspx -
already the ip configured VCnter end, and now I need to reserve the Ip at the level of the vRA
already the ip configured VCnter end, and now I need to reserve the Ip at the level of the vRA
check the status of ping if already Ip's ping then
go to Db server and select the dabase and run the new querySelect * from StaticIPv4Address where IPv4Address = "
Update StaticIPv4Address Set StaticIPv4AddressState = '0' where IPv4Address = "
check the address staticIPv4 if 1 = unassigned
Enter the IP address in the above script, and it will allocate
-
Replace my motherboard because of the storm, and now I can't activate Windows.
Activation support
My motherboard has been zapped during a storm, so I had to replace the RAM, PSU and video card. Everything is almost up and running, but now Windows wonder (because of hardware changes) to activate my copy of the operating system. He also told me that my PID has expired. Hard drives have not changed, only the above.
I bought a family pack of Windows 7 Home Premium at Amazon in 2009 and installed on three computers that I have at home. Now, due to the change of equipment, it is not allowing me to enter the product key, I used when I first installed.
Is a number or a resource that I can turn support free online?
Windows 7 Home Premium Family Pack is a upgrade license, which means you must have a license of previous qualifying installed on the disk. If the previous qualification license you had installed before the upgrade to Home Premium Family Pack in the old computer's preinstalled with it, this is why you see this message now.
Skip entering your product key Windows 7 and complete the installation.
When you reach the desktop, click Start, right-click on computer
Click on properties
Scroll down to the Windows Activation
Click the link x days before activation.
Click on the link that says: "show me other ways to activate.
Enter the product key
Click next
Select the Activation of the phone
Click Next when you enter your key page
Select your country
Click Next, call the number listed
Be sure to explain your situation to the Appeals Officer.
Provide the installation generated when ID requested by the call agent
They give a confirmation ID in return, enter it
Click next to complete the activation.
However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.
15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.
So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.
-
I lost my product key. I had to wipe my hard drive due to the virus and I installed win xp pro back. now, I can not activate my copy. This is the disc that came with the computer. its windows xp pro sp/2 from dell. I've tried everything I know using keyfinders and research on the disk. the keyfinders and drive both will eventually go wrong. What can I do next?
original title: lost product keyHello
Contact Microsoft telephone support on this.
http://support.Microsoft.com/contactus
For more information visit: How to replace Microsoft or hardware, packs software service to order and replace product manuals
-
MacBook 13 "" Cannot repair the disk"then closed system and now cannot unlock drive.
MacBook was slow so I checked and repaired disk permissions, everything went beautifully. Then, I ran check disk and got the message "stopped disk utility check Macintosh HD." Instructions for restart using the R command and choose utility disk, because the required disk to be repaired using the HD of recovery. I followed this instruction and got the message "Stopped Macintosh HD repair disk utility," followed by "disk utility can't repair the disk. Save as many files as possible, reformat the drive and restore your backed up files. "After you have clicked 'OK' I was given a guest to the"Restart"I did. The system tried to restart and never exceeded a gray screen before stopping. On several occasions, he did it, so I tried to boot using the R command and perform a new installation of Mavericks, only to have it tell me that the Macintosh HD disc is locked, and Recovery HD drive is locked. Also tried a start with the S command, and entering the guest suggested, unsuccessfully, and entering reboot nothing helps. Now, I'm running out of ideas and seriously need help.
For more serious issues, I do not have a backup Time Machine recently and he was always, since I backed up on my external hard drive. I am in serious need of help and would appreciate any guidance. Thank you!!!
You need a new drive.
-
I bought a laptop broken at a friend's House. It is not used for the operating system windows 8 and wanted to use the Windows Vista operating system. Son of friends put in place this laptop for it, which was new when she bought in a retail store. Is there a way I can find out whether all the partitions have been deleted during the installation of Vista? I still see window 8 logo that I sign as an administrator user on this laptop.
When I log on this computer, the previous owner of the screen name is the only one that appears. I go in Control Panel, click Add another account, then I see the screen name I posted. I could use the WiFi from my PC at home that Win 7 OS.
When I started working with the laptop, I was able to bring control of the camera. Now I thought that the version that I use does not allow this operation. Be happy with any Positive help with my problems.
Thank you
Phil W.
Hello
Start > type CMD
Right click on CMD and select run as administrator
Type diskmgmt.msc
Press enter
This opens where you can view the partitions on the disk management system
Who has installed Windows Vista, your son or friend? Fact that they create a dual boot environment or reformat?
http://www.technorms.com/8438/Windows-8-create-hard-drive-partition
Multibooting requires separate partitions on the hard drive of your computer for each operating system. To create and format a partition, see create and format a hard disk partition.
To check if a dual boot system in place, start > Type msconfig
Click on the Startup tab
You see two operating systems listed? Windows 8, Windows Vista
http://www.groovypost.com/HOWTO/Microsoft/Vista/how-to-change-default-OS-for-dual-boot-system/
I think that Windows 8 has the following partitions
400 MB Partition Recovery (contains recovery information dated from before my upgrade)
- 300 MB EFI System Partition
- 350 MB Partition Recovery (contains information for recovery of my upgrade)
- 17 GB Partition Recovery
- 220 GB of Partition primary
Windows Vista has drive C and drive D
Done reformatting refers to a hard disk or partition that already has been formatted or that contains data on it. Reformatting a disk deletes all the data on the disk.
-
There is not a 'live' link to click on for a download.
Hi GlendaPrice,
When you use Windows Live Hotmail and the problem you posted is with Windows Live, so it would be better suited in the Windows Live community. Please visit the link below to find a community that will provide the best support.
Windows Live Solution Center Hotmail Portal
http://windowslivehelp.com/product.aspx?ProductID=1
I hope this helps.
-
I borrowed a windows disc 8 to begin the new hard drive. I was running Windows 8.1 upgrade of Windows 8 beta. I can't register the windows 8 OS with my Windows 8 update product key. Can I just load windows 7 from this point then reload the Windows 8 upgrade?
Thanks for any comments.
v/r,
Rich
I had to order the recovery disk (windows 7) and will take a decision in this sense.
Thank you for your help.
Best regards
Rich
-
Restored for laptop, need to activate Windows Vista product key on the laptop is unreadable
My computer has been recently completely reset and now I need to activate windows vista again. In order to obtain a sustainable version of vista that I need a product key, however, the bottom of my laptop product key has some unreadable letters/numbers. What can I do about it?
Hello
I suggest that you contact the manufacturer of your computer and the recovery order discs form their
need you normally not a product key to install
ask them about it
-
replace the RAM, the need to activate Windows 7 OEM new will affect Media Center DRM?
Title says it all.
In order to avoid BSOD that * could * be linked to the RAM, I replace two DIMMs with a different model. When I swapped the locations for the original DIMMs, I received a message stating that the material had changed and I had to re-activate Windows. That's happened.I am now assuming that completely change the RAM will trigger the message "hardware changes took place. I use this PC as an HTPC with a Ceton InfiniTV 4 tuner card, and I have a lot of copy - once programs and films recording. I don't want to lose the ability to play them.My guess is that the reactivation will not affect the DRM. It does not seem to have done with the recent reactivation. It's not like it's a new motherboard or system disk, but I would be sure.Thank you.(1) change of RAM only is unlikely to trigger an activation request - although if other materials also has changes in the recent past, he can do.
(2) activation and DRM are totally different things, and should not affect the other.
-
I'm not able to install a hp psc 1610 all in one Windows xp on one of my computer. Once I plug the Hardware Wizard take control and finally Miss installation
I do installation even on my second computer and done everything very well. I don't know what the problem is! both are wxp 2002 sp3Hello
· You receive an error message or error code?
You can see the link and search for troubleshooting steps about the error message or error code that you receive the printer.
-
My title pretty much sums up my problem.
I need to buy a new hard drive. All I have is the Windows 7 upgrade disk I bought for some time. I can the Windows 7 installed on this drive, or I have to buy a copy of Vista/XP to install and upgrade?
If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.
How to do a clean install with upgrade disc:
Boot from the Windows 7 DVD
Click Install now
Accept the license agreement
When the option is displayed to select a type of installation, click (Custom advanced)
Click on drive Options
Select the disc/s click on Delete
Click new
Click on apply
Click OK
Click Format, and then click next to proceed with the installation
Skip entering your product key Windows 7 and complete the installation.
When you reach the desktop, click Start, right-click on computer
Click on properties
Scroll down to the Windows Activation
Click the link x days before activation.
Click on the link that says: "show me other ways to activate.
Enter the product key
Click next
Select the Activation of the phone
Click Next when you enter your key page
Select your country
Click Next, call the number listed
Be sure to explain your situation to the Appeals Officer.
Provide the installation generated when ID requested by the call agent
They give a confirmation ID in return, enter it
Click next to complete the activation.
However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.
15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.
So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.
or
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us -
I have a version of Audition 3.0 new-in-box I bought about 6 years; for various reasons, it has been sitting on the shelf all this time. Now I need to install it; He moved well on my system (Win XP) but I can't seem to activate. I try to use the phone activation because the machine I use is not connected to the net. How can I activate this s/w?
You will not be able to. You will need to acquire a special copy. See the following topics:
Error: Unavailable activation server | CS2, Acrobat 7, hearing 3 -.
l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm
Maybe you are looking for
-
Percentage of battery is not when the IPhone works on a charge
Hello world I am new to Apple as a client so still getting used to the phone and it's features. I recently bought the Iphone 6 s more and I noticed that when I charge it and it is turned off or turned off it does not show the battery charge or how mu
-
Send meeting requests in a format of calendar with reminders/alerts?
To set up meetings which will automatically notify the invited participants.
-
If I visit the following website http://www.cannonclevelandfunerals.com on my Samsung Galaxy 10.1Tablet of the part with the States of photo to an add-on and the portion of the screen with photosis empty. How will I know which add-on is required. I a
-
URL not no projection in a new window
Given that I have updated to FF10, when I click on a site to open in a new window, the URL does not appear. I need to be able to open several windows and have access to the URL.
-
Returning to Win 7 of win 10 problem
In an attempt to return to windows windows 7 10 I try to use the option in the "Go back to Windows 7" windows recovery options when I click on Get Started, I get the message "connect your PC. You cannot go back on battery alone. Connect your PC and t