I reinstalled Vista and now my screen flickers, a bit like a ripple effect when scrolling.it won't let me edit the recycling rate
everything is whack... color, writing, everything is wrong.it won't let me change anything, everything is grey, I just want to change the rate of recycling and the resolution.
Hello
Make sure you have the latest vista drivers for your computer which you can get your computer manufacturers Web site
go to their website and look for a driver and software download section
Enter your model number for the last look drivers vista then download and install
Tags: Windows
Similar Questions
-
Windows7 won't let me edit the hosts file and save it
Windows7 won't let me edit the hosts file and save it. What should I do to save the edited host file?
This is a built-in security feature. There is an easy solution. Click onStart-> all programs-> Accessories. Right click onNotepadand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow or Yes.
Open the Hosts file (from the notebook, that you opened), make your changes, and then click file ->Save.
Barbara
-
I had to reinstall Vista and now my microphone does not work.
I fully reinstalled Vista and my sound was working fine, but my microphone was not. I looked for answers on the forum, and one person said the audio driver to uninstall and reinstall. I uninstalled and now I can't figure out how to reinstall! Help, please.
It comes with Vista, upgrade install and activate Forum.
http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads
They will help you with your question in Vista Hardware and drivers Forum above.
See you soon.
Mick Murphy - Microsoft partner
-
Had to reinstall Vista and now can't view or print Word 2002 files
but in the meantime, have lost the ability to view, edit and print files from word 2002. All the solutions out there please? Before to remove Vista and reinstall it had notification on the page to update the window that it problems with Vista and windows 2002 known, so mentioned would be a good idea to re instal?
Thanks in advance for any help there. Candy
Original title: A RECENTLY had to REMOVE Vista and then re-instal -
but in the meantime, have lost the ability to view, edit and print files from word 2002. All the solutions out there please? Before to remove Vista and reinstall it had notification on the page to update the window that it problems with Vista and windows 2002 known, so mentioned would be a good idea to re instal?
Thanks in advance for any help there. Candy
Hey CandySmart
Make sure that you have all updates installed for office
read information from microsoft about this below
http://www.Microsoft.com/Windows/compatibility/Windows-Vista/search.aspx?type=software&s=word%202002
Walter, the time zone traveller
-
Is it possible to get the program to reset or what to do, I need to connect to my windows vista and im the only admin on my computer
http://support.Microsoft.com/default.aspx/KB/940765/en-us
How to use system restore to log on Windows 7 or Windows Vista when you lose access to an account
As you say: ' I forgot I guess that if he tells me ', read the above info.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/default.aspx/KB/189126
"Microsoft's strategy concerning lost or forgotten passwords"
Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.
Read theBANNING of cracking of passwords information tools information provided in these forums in the thread above posted byBill fill MSFT, moderator
See you soon.
Mick Murphy - Microsoft partner
-
I had to reinstall Vista and now my display driver and the microphone does not work.
I recently had to reinstall Windows Vista on my PC. Now my audio works perfectly, but my microphone will not even if the Control Panel recognizes it is connected and working properly. Also, my display driver stopped responding from time to time and crashes my computer. Geek Squad, I need new drivers, and they want me to pay 130 to install. I'd rather do it myself. I tried to install the driver for my card NVIDIA and Vista, but that did not help.
Hi leannan02,
Please see the link with some additional troubleshooting below:
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems
I hope this helps!
Debra
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Renistalled Vista and now the keys FN and so does not work.
I recently reinstalled Vista and now the FN keys and thus won t work and the drivers offered on the Toshiba site aren t install properly, and I have also 2 unknown devices in my device manager could it so those?
Any help would be greatly appreciated!
Hello
I agree with the user above.
The driver for the touchpad control touchpad and value added package (VAP) must be installed!
Some series of portable need for the utility of Flash Card Toshiba in order to get the FN keys works! But not all
Then take a look at the European Toshiba driver and driver page, if you could find these driversWelcome them
-
I reinstalled Windows Vista and now I can't run "repair your computer".
I reinstalled Windows Vista and now I can't run "repair your computer". I need to do this because I'm missing a few scripts. What should I do to fix this
Hello
Run the sfc/scannow command.
http://support.Microsoft.com/kb/929833
Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:
- Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
- Type the following command and press ENTER:sfc/scannow
The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions
If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation
read the below tutorial on how to perform a repair installation
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html
-
When I turn on my pc it loads windows vista but somehow my name and my password do not work now. I can go in safe mode, but it won't let me change the name or password. I wonder if I can just get on with windows 7 or 8 without being able to access my current windows vista?
Hi Sean,.
Please follow the methods.
Method 1:
Follow the instructions from the link
What to do if you forget your Windows password
http://Windows.Microsoft.com/en-in/Windows-Vista/what-to-do-if-you-forget-your-Windows-password
Method 2:
Follow the instructions from the link
Boot from the Windows 7 DVD to perform a custom with formatting the hard drive installation.
Installation and reinstallation of Windows 7
http://Windows.Microsoft.com/en-in/Windows7/installing-and-reinstalling-Windows-7
NOTE: before starting the installation. should be ready for the worst case scenario that leads to your existing data on your current computer to delete. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before you start the installation.
Reference links:
System requirements Windows 8
http://Windows.Microsoft.com/en-in/Windows-8/system-requirements
How to upgrade to Windows 8
http://Windows.Microsoft.com/en-in/Windows-8/install#1TC=T1
-
I reinstalled Windows and now I get messages from activation request.
Original title: activate Windows.
I reinstalled Windows and now I get messages from activation request
Hello
Here is a good guide on what you need to do.
"How to activate Vista normally and by Activation of the phone '
http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html
See you soon.
-
I reciently reinstalled windows and now the fence, restore down and minimize buttons are not mixed together. they are indervidual buttons. Have all the updates and service pack installed.
I saw the screen shot, I think that Aero is disabled, or the Desktop Window Manager Session Manager service is disabled or stopped. Try to run the troubleshooter 'display the Aero effects. " And when firstly, you had the drivers that do NOT support Aero and then updates, Windows does NOT automatically update the settings. You must recaulculate the computer for Aero Performance Index is enabled.
Or you can see more help on this page, which contains explanations of the Aero and a link to a Web page for downlading an application which solves the problems.
Hope that helps!
Marko Calasan.
-
Drivers Vista MSN
Should Microsoft Vista drivers operate printer Brother HL-1240? I recently downloaded updates for Vista, and now I can no longer print on my printer Brother HL-1240. Updates are perhaps the cause of this problem? If this isn't the case, please let me know if I get the problem somewhere else.Hello
Your question is could a Windows Update may be charged a wrong Brother Printer Driver? Yes.
One way to know is to look in the history of updates to see what has been installed and uninstall then one that seems incorrect.
If you are an update of the Microsoft printer driver note that Microsoft updates pilot equipment for other manufacturers are not normally updated.
Here's how to uninstall specific updates;
http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update
If an update is the problem and stop it reinstall > list of updates to install > right click on the incorrect update > UAC prompt > and then click Hide.
See you soon.
p.s. Always get the latest updates of the driver from the hardware manufacturer.
Also would it be a good idea if above does not work to download the last direct Brother printer driver; If necessary reinstall your printer...
-
My monitor flashed and now my screen is upside down.
My monitor flashed and now my screen is upside
Hi FrankMaffie,
· Have to remind you to make changes on the computer before the show?
You must have accidentally hit Ctrl + Alt + left/right/down/arrow up and the screen swivels.
To make this work "shortcut keys" option should be enabled, otherwise it wouldn't work. Here's how you can enable or disable the "keys" on Windows XP.
a. right click somewhere on the desktop and choose "graphics properties."
(b) a window opens. There, you can press "Hot Keys" and enable or disable this option by checking or unchecking the checkbox.
You can also view the Microsoft Knowledge Base article for more information on keyboard shortcuts:
Keyboard shortcuts for Windows
http://support.Microsoft.com/kb/126449
List of keyboard shortcuts available in Windows XP
http://support.Microsoft.com/kb/301583
Hope this information helps.
-
Original title: windows xp.
reinstalled xp and now unable to connect to the internet, dsl provider says the leaves to reinstall the connection LAN how fix this?
Hello
Go to the website of your computer manufacturer > drivers download Section > put your computer model number > operating system > Search adapter network, pilots etc. for her.
Get graphics, sound while you're there.
You should always do a reinstallation.
Use the computer that you use to make the foregoing > download and save in this office > copy of Flash Drive > then install in another computer.
See you soon.
-
My 3 year old has played with the computer and now my screen is sideways. How should I do? I tried my computer and went through everything on the screen and doesn't change anything.
Here's how to do hold Ctrl + Alt and then press the arrow keys on your keyboard.
or right click on desktop, select options graphics then Rotation.
Maybe you are looking for
-
Is it possible to download the Toshiba Recovery Media Creator?
Hello everyone, I have a question on the Recovery Media Creator. Is it possible to download it from toshiba.com? Because I can't find it here... I deleted from my computer cell, just thought that I should not use anyway. But now I have to install a s
-
Is a 2 GB 667 MHz DDR2 SDRAM expansion memory correct for a mid 2007 iMac
I have an iMac mid 2007 which has served me well, but becomes slower and slower. He has 2-1 GB 667 MHz DDR2 SDRAM, one in each location. Can I replace each 1 GB 2 GB and hep will be me with the speed? Thank you CAP2799
-
A data in the very important document, which I just changed in deleted email
I can't believe bad luck indredible, a very long project that I worked on for weeks in an e-mail to aol using Firefox browser - I managed to complete my joy yesterday but incredibly to is did not last long - somehow all except 2 periods highlighted a
-
How long to get the simple multifunctoin DAQ in Labview?
I am doing some digital simple, slow and analog I/o. on 5 channels in total, 1 second update rate is very good. I tried to connect an Arduino to Labview / PC, but was unable to make things work. I'm using something like the USB-6001, want to read / w
-
Error number: 0 x 80240036 for windows update.
Computer RELOADED - getting error number error message: 0 x 80240036 for windows update. It will not work. You need to get all updates. How can I fix it?