Should Microsoft Vista drivers operate printer Brother HL-1240? I recently downloaded updates for Vista, and now I can no longer print on my printer Brother HL-1240.

Similar Questions

• I reinstalled Windows Vista and now I can't run "repair your computer".

  I reinstalled Windows Vista and now I can't run "repair your computer". I need to do this because I'm missing a few scripts.  What should I do to fix this

  Hello

  Run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• Upgrading from Windows XP to Windows Vista and now I can not find wifi or when I try to connect to the internet, I get an error, "a cable is not plugged on the network card.

  Wireless connections

  I upgraded my dell vostro laptop 1000 Windows xp to vista and now I can not find wifi or when I try to connect to the internet I get an error, "a cable is not plugged into the card network", "connection to the Local network. Everything worked fine until I upgraded. I noticed in my device manager, the driver for the system controller and core network are not installed. Could it be the problem? Is someone can you please help me understand this?

  Hello

  I noticed that you had created another similar to this question. Have you tried the steps suggested in this post?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/how-do-i-put-WiFi-back-on-my-PC-after-upgrading-to/c9b90ec1-8393-4B57-b4af-2fbeb802af58

  You can also try the following methods and check if it helps.

  Method 1:

  Update a network adapter driver.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Troubleshoot network adapter problems.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

• Acrobat 9.5.3/4 update caused accident and now I can't print to PDF Distiller

  We have a TON of computers with Acrobat 9 Pro.  They have been working well, but today I had a ton of calls not being able to print to PDF.

  When you try to distill the accidents with:

  The application failed to initialize properly (0xc0000022).

  This happens on all those who are up to date in the plots.

  And old computer that was on Acrobat 9 works, updated to 9.2, worked, upgrade 9.5.3 = Busted as indicated above.

  I can't seem to find how to uninstall this fix, and I don't want 50 copies to uninstall and reinstall...

  HELP PLEASE! ~ !!!

  Well Yes, we are, and I checked if you DISABLE the resident shield, then still works very well, (you may need to restore JP2KLib.dll from quarantine).  Way to go AVG > :|

• When I try to reboot my laptop (toshiba Windows Vista) displays a black screen and now I can not it reboot. It says bootmgr missing. What should I do to restart?

  Can someone help me please! When I try to reboot my laptop (toshiba Windows Vista) displays a black screen and now I can not restart. It says systeminst9.wnm is missing. What should I do I restart yo?

  Hi Ashutosh,

   
  You did changes to the computer before the show?
   
  This error indicates that the boot sector is corrupted or missing.
   
  I suggest for the link and follow the steps in the article:
  Windows error message «Bootmgr is missing Press Ctrl + Alt + Delete to restart»
  http://support.Microsoft.com/kb/2622803
   
  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
   
  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• I use microsoft vista and I can not find my webcam to any help

  I use Microsoft vista and I can not find my webcam to any help

  I use Microsoft vista and I can not find my webcam to any help

  Huh?

  Related topics

  Webcam with operating system compatibility
  My computer does not know that it has built in webcam.
  I have a toshiba laptop and I can't get the webcam to work it says its disabled
  Vista cannot locate drivers for my new LifeCam

• LaserJet CP2025: My computer did an update of Windows 10 and now I can't do duplex printing CP2025

  Microsoft today pushed through an update Windows 10. Now I can't do a duplexing printer laserjet CP2025. Any ideas? The drivers that I download do not seem to help.

  Hello
  Make sure that the automatic duplex printing option is selected:

  Enter the control panel > devices and printers.
  Right-click the printer icon, and then click printer properties.
  Click the device settings tab.
  As installed in Duplex Automatic Two-Sided accessory and then click OK to save the change.

  Now try printing again.

  Kind regards
  Shlomi

• I had to reinstall Vista and now my microphone does not work.

  I fully reinstalled Vista and my sound was working fine, but my microphone was not.  I looked for answers on the forum, and one person said the audio driver to uninstall and reinstall.  I uninstalled and now I can't figure out how to reinstall!  Help, please.

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  They will help you with your question in Vista Hardware and drivers Forum above.

  See you soon.

  Mick Murphy - Microsoft partner

• Updated to Photoshop CC 2015.1.2 and now I can't print.

  Updated to Photoshop CC 2015.1.2 and now I can't print.

  Photoshop crashes when I select the printer controls.

  With the help of Windows 7-64.

  What should I do?

  Hi CT_Vancouver,

  Please make sure that your drivers are up-to-date.

  You can see the Photoshop to solve printing problems

  Kind regards

  Assani

• Renistalled Vista and now the keys FN and so does not work.

  I recently reinstalled Vista and now the FN keys and thus won t work and the drivers offered on the Toshiba site aren t install properly, and I have also 2 unknown devices in my device manager could it so those?

  Any help would be greatly appreciated!

  Hello

  I agree with the user above.
  The driver for the touchpad control touchpad and value added package (VAP) must be installed!
  Some series of portable need for the utility of Flash Card Toshiba in order to get the FN keys works! But not all
  Then take a look at the European Toshiba driver and driver page, if you could find these drivers

  Welcome them

• I upgraded my dell e1705 inspriron from xp to vista and now my cd/dvd does not, in my opinion, driver is missing... what I do

  I upgraded my dell e1705 inspriron from xp to vista and now my cd/dvd does not, in my opinion, driver is missing... what I do

  See this article would allow:

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

• I just downloaded Adobe XI on my macbook air, and now I can't save or print the PDF files. Don't let me do print - save as PDF, and if I do record as I get a message indicating that the file is corrupted. I had NO PROBLEMS of all do this several times unt

  I just downloaded Adobe XI on my macbook air, and now I can't save or print the PDF files. Don't let me do print - save as PDF, and if I do record as I get a message indicating that the file is corrupted. I had NO PROBLEMS of all do this several times until I downloaded the new version. I uninstalled and reinstalled it, nothing helps. I am super frustrated.

  lrfrustrated wrote:

  I just downloaded Adobe XI on my macbook air, and now I can't save or print the PDF files. Don't let me do print - save as PDF, and if I do record as I get a message indicating that the file is corrupted. I had NO PROBLEMS of all do this several times until I downloaded the new version. I uninstalled and reinstalled it, nothing helps. I am super frustrated.

  Print > save as PDF - use an excerpt (part of Mac OS X), so Adobe Reader should have no effect on that at all.

  As for the error "file corrupted", simply uninstall the Reader app will not affect it. Follow these steps:

  Mac/HD/Library/Internet Plug-ins

  

  Trash the files AdobePDFViewer.plugin and AdobePDFViewerNPAPI.plugin

  Mac HD/Applications

  

  Trash the application Adobe Reader

  [user] / Library/Preferences

  

  Trash the com.adobe.Reader.plist file

  To access the [user] / Library, hold down the 'Option' and click on 'Go' in the FInder menu.

  Mac HD/Library/Application Support/Adobe

  

  Trash the drive (full record)

  Empty the trash.

  Download the installer FULL here: http://get.adobe.com/reader/enterprise/

  Quit your browser, and then reinstall the drive.

  Run it from the Applications folder and agree to the license agreement.

  You should have no problem with Safari PDF files download.

  Unfortunately, ANY PDF file that says it is damaged.... You will need their trash.

• Error 1305: Error reading from file C:\Program Files\Microsoft Games Flight Simulator X\Scenery\World\texture\041b2su6.bmp.Verify that exists it and that you can access

  When I want to install Flight Simulator X I get the error error 1305: error reading from file C:\Program Files\Microsoft Games Flight Simulator X\Scenery\World\texture\041b2su6.bmp.Verify that exists it and that you can access how to fix?

  Hi Johannholm,

  Thanks for posting your question in the Microsoft Community. We are happy to help you.

  Go through the suggestions of this link and check if it helps you to install Flight Simulator game.

  Error message when you install a Microsoft game or a mapping program

  http://support.Microsoft.com/kb/258496

  NOTE: After you check the clean boot feature configure Windows to use a Normal startup using step 3A proposed in the above mentioned link.

  WARNING CHKDSK:

  Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Hope it will be useful. If you still have questions, please reply and we will be happy to help you.

• I recently upgraded from XP to 7 and now I can't find a program such as Word or Excel Microsoft.

  I recently upgraded from XP to 7 and now I can't find a program such as Word or Excel Microsoft. I might need to go back to the disc image of Windows 7, but I don't know where to find it.

  You may not install or use programs in the windows.old folder

  MS Office is not provided with any version of win, although the origonal PC manufacturer may have included a trial version.

  You must install the origonal program installation media programs and activate with this key programs.

  Probably at some stage, you bought a version of MS Office and that is the case you would have the Office key

  Navigate the folder windows.old to Programs\MS Office, find winword.exe, and then check the properties/details, what is the product name & Version of the file?

• VB6 with DAQmx compatibility with Microsoft Vista and Win7?

  Hello

  I'm trying to figure out how what are my options for running my VB6 applications that use the API C of NOR-DAQmx with Vista or Win7.

  I have certain applications that we have maintained in VB6 (with Measurement Studio 6).  I programmed the software for traditional OR-DAQ hardware originally.  I suppose that I used for about 10 years or more.  About 2 years ago or if we needed to use our software with hardware recent DaqMX I've been able to use the API C OR-DAQmx for Visual Basic 6.0.  My application really support two hardware platforms simultaneously.  The person responsible for the project wanted to have 1 single application managed the two platforms (daqmx and inheritance).  So far, it's all great.

  If anyone knows what are my options if I want to use Windows Vista or Windows 7.  We are currently running this app on Windows XP.  I'm ready to upgrade my software if necessary although I have to spend to VB.net and Measurement Studio 7.1 (I currently have).  But if we were to happen tomorrow is there any compatilibility. I read that the traditional / legacy NOR-DAQ is not supported in Vista (Win7).  I googled and found there was a beta version which seemed to weakly in support of the legacy but did not support USB devices which is what I have (6020e (inheritance), SCXI (daqmx), 6259 (daqmx).)  I've heard that Windows 7 will have a virtualization system for XP applications that do not work natively under Win7, but for some reason, I doubt that the drivers and hardware will be run this way.

  Also, should there be differences between Vista and 7? I'm an XP user and computers I support many XP so I really have no experience with Vista.  I plan to install the Windows 7 RC to try some of this stuff.

  Thank you, David

  Use of our released traditional DAQ drivers is not supported on Vista systems, even running in virtual Windows XP mode. The driver works at a lower level which can emulate a virtual mode.

  However, we have a public beta version for a traditional DAQ driver that works for Vista. You can read about this version beta here

  -Abram